u-boot/drivers/timer/imx-gpt-timer.c
Giulio Benetti f8c8573b85 timer: imx-gpt: Add timer support for i.MX SoCs family
This timer driver uses GPT Timer (General Purpose Timer) available on
a lot of i.MX SoCs family. This driver deals with both 24Mhz oscillator
as well as peripheral clock.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Giulio: added the driver's stub and handled peripheral clock prescaler
setting making driver to work correctly]
Signed-off-by: Jesse Taube <mr.bossman075@gmail.com>
[Jesse: added init, setting prescaler for 24Mhz support and enabling
timer]
2021-06-09 13:01:33 +02:00

163 lines
3.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2021
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <fdtdec.h>
#include <timer.h>
#include <dm/device_compat.h>
#include <asm/io.h>
#define GPT_CR_EN BIT(0)
#define GPT_CR_FRR BIT(9)
#define GPT_CR_EN_24M BIT(10)
#define GPT_CR_SWR BIT(15)
#define GPT_PR_PRESCALER24M_MASK 0x0000F000
#define GPT_PR_PRESCALER24M_SHIFT 12
#define GPT_PR_PRESCALER24M_MAX (GPT_PR_PRESCALER24M_MASK >> GPT_PR_PRESCALER24M_SHIFT)
#define GPT_PR_PRESCALER_MASK 0x00000FFF
#define GPT_PR_PRESCALER_SHIFT 0
#define GPT_PR_PRESCALER_MAX (GPT_PR_PRESCALER_MASK >> GPT_PR_PRESCALER_SHIFT)
#define GPT_CLKSRC_IPG_CLK (1 << 6)
#define GPT_CLKSRC_IPG_CLK_24M (5 << 6)
/* If CONFIG_SYS_HZ_CLOCK not specified et's default to 3Mhz */
#ifndef CONFIG_SYS_HZ_CLOCK
#define CONFIG_SYS_HZ_CLOCK 3000000
#endif
struct imx_gpt_timer_regs {
u32 cr;
u32 pr;
u32 sr;
u32 ir;
u32 ocr1;
u32 ocr2;
u32 ocr3;
u32 icr1;
u32 icr2;
u32 cnt;
};
struct imx_gpt_timer_priv {
struct imx_gpt_timer_regs *base;
};
static u64 imx_gpt_timer_get_count(struct udevice *dev)
{
struct imx_gpt_timer_priv *priv = dev_get_priv(dev);
struct imx_gpt_timer_regs *regs = priv->base;
return timer_conv_64(readl(&regs->cnt));
}
static int imx_gpt_setup(struct imx_gpt_timer_regs *regs, u32 rate)
{
u32 prescaler = (rate / CONFIG_SYS_HZ_CLOCK) - 1;
/* Reset the timer */
setbits_le32(&regs->cr, GPT_CR_SWR);
/* Wait for timer to finish reset */
while (readl(&regs->cr) & GPT_CR_SWR)
;
if (rate == 24000000UL) {
/* Set timer frequency if using 24M clock source */
if (prescaler > GPT_PR_PRESCALER24M_MAX)
return -EINVAL;
/* Set 24M prescaler */
writel((prescaler << GPT_PR_PRESCALER24M_SHIFT), &regs->pr);
/* Set Oscillator as clock source, enable 24M input and set gpt
* in free-running mode
*/
writel(GPT_CLKSRC_IPG_CLK_24M | GPT_CR_EN_24M | GPT_CR_FRR, &regs->cr);
} else {
if (prescaler > GPT_PR_PRESCALER_MAX)
return -EINVAL;
/* Set prescaler */
writel((prescaler << GPT_PR_PRESCALER_SHIFT), &regs->pr);
/* Set Peripheral as clock source and set gpt in free-running
* mode
*/
writel(GPT_CLKSRC_IPG_CLK | GPT_CR_FRR, &regs->cr);
}
/* Start timer */
setbits_le32(&regs->cr, GPT_CR_EN);
return 0;
}
static int imx_gpt_timer_probe(struct udevice *dev)
{
struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
struct imx_gpt_timer_priv *priv = dev_get_priv(dev);
struct imx_gpt_timer_regs *regs;
struct clk clk;
fdt_addr_t addr;
u32 clk_rate;
int ret;
addr = dev_read_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
priv->base = (struct imx_gpt_timer_regs *)addr;
regs = priv->base;
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0)
return ret;
ret = clk_enable(&clk);
if (ret) {
dev_err(dev, "Failed to enable clock\n");
return ret;
}
/* Get timer clock rate */
clk_rate = clk_get_rate(&clk);
if (clk_rate <= 0) {
dev_err(dev, "Could not get clock rate...\n");
return -EINVAL;
}
ret = imx_gpt_setup(regs, clk_rate);
if (ret) {
dev_err(dev, "Could not setup timer\n");
return ret;
}
uc_priv->clock_rate = CONFIG_SYS_HZ_CLOCK;
return 0;
}
static const struct timer_ops imx_gpt_timer_ops = {
.get_count = imx_gpt_timer_get_count,
};
static const struct udevice_id imx_gpt_timer_ids[] = {
{ .compatible = "fsl,imxrt-gpt" },
{}
};
U_BOOT_DRIVER(imx_gpt_timer) = {
.name = "imx_gpt_timer",
.id = UCLASS_TIMER,
.of_match = imx_gpt_timer_ids,
.priv_auto = sizeof(struct imx_gpt_timer_priv),
.probe = imx_gpt_timer_probe,
.ops = &imx_gpt_timer_ops,
};