leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2f39ab1649
u-boot/arch/arm/dts/imx8qm-rom7720-a1.dts
Oliver Graute eef72440db imx: support i.MX8QM ROM 7720 a1 board 
Add i.MX8QM ROM 7720a1 board support

Boot log as below:
U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200)

CPU:   NXP i.MX8QM RevB A53 at 1200 MHz

Model: Advantech iMX8QM Qseven series
Board: ROM-7720-A1 4GB
Build: SCFW 65afe5f6
Boot:  SD2
DRAM:  4 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1
, eth-1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Ye Li <ye.li@nxp.com>
Cc: uboot-imx <uboot-imx@nxp.com>
2019-11-03 21:18:00 +01:00

374 lines
9.9 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Freescale Semiconductor, Inc.
* Copyright 2017 NXP
*/
/dts-v1/;
/* First 128KB is for PSCI ATF. */
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
/ {
model = "Advantech iMX8QM Qseven series";
compatible = "fsl,imx8qm-mek", "fsl,imx8qm";
chosen {
bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
stdout-path = &lpuart0;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
user {
label = "heartbeat";
gpios = <&gpio2 15 0>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb_otg1_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_otg1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: usdhc2_vmmc {
compatible = "regulator-fixed";
regulator-name = "sw-3p3-sd1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog_1>;
imx8qm-mek {
pinctrl_hog_1: hoggrp-1 {
fsl,pins = <
SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000048
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0
SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000048
SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000048
SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000060
SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x00000060
SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000060
SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000060
SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x00000060
SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x00000060
SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x00000060
SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000060
SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000060
SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000060
SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x00000060
SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x00000060
>;
};
pinctrl_fec2: fec2grp {
fsl,pins = <
SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0
SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060
SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060
SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060
SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060
SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060
SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060
SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060
SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060
SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060
SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060
SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060
SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060
>;
};
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
SC_P_UART0_RX_DMA_UART0_RX 0x06000020
SC_P_UART0_TX_DMA_UART0_TX 0x06000020
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021
>;
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020
>;
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
fsl,pins = <
SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000040
SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000020
SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000020
SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000020
SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000020
SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000020
SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000020
SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000020
SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000020
SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000020
SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000040
SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000020
>;
};
pinctrl_usdhc2_gpio: usdhc2grpgpio {
fsl,pins = <
SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021
SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021
SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
fsl,pins = <
SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000040
SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000020
SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000020
SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000020
SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000020
SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000020
SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000020
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041
SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021
SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021
SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021
SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021
SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021
/* WP */
SC_P_USDHC2_WP_LSIO_GPIO4_IO11 0x00000021
/* CD */
SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021
>;
};
pinctrl_lpi2c1: lpi2c1grp {
fsl,pins = <
SC_P_GPT0_CLK_DMA_I2C1_SCL 0x06000020
SC_P_GPT0_CAPTURE_DMA_I2C1_SDA 0x06000020
/*
* Change the default alt function from SCL/SDA to others,
* to avoid select input conflict with GPT0
*/
SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x0700004c
SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x0700004c
SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 0x0700004c
SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 0x0700004c
>;
};
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
SC_P_SPDIF0_TX_LSIO_GPIO2_IO15 0x00000021
>;
};
};
};
&gpio2 {
status = "okay";
};
&gpio4 {
status = "okay";
};
&gpio5 {
status = "okay";
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
bus-width = <4>;
cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <4>;
cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
fsl,ar8031-phy-fixup;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec2>;
phy-mode = "rgmii";
phy-handle = <&ethphy1>;
fsl,ar8031-phy-fixup;
fsl,magic-packet;
status = "okay";
};
&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c1>;
status = "okay";
pca9557_a: gpio@18 {
compatible = "nxp,pca9557";
reg = <0x18>;
gpio-controller;
#gpio-cells = <2>;
};
pca9557_b: gpio@19 {
compatible = "nxp,pca9557";
reg = <0x19>;
gpio-controller;
#gpio-cells = <2>;
};
pca9557_c: gpio@1b {
compatible = "nxp,pca9557";
reg = <0x1b>;
gpio-controller;
#gpio-cells = <2>;
};
pca9557_d: gpio@1f {
compatible = "nxp,pca9557";
reg = <0x1f>;
gpio-controller;
#gpio-cells = <2>;
};
};
&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
status = "okay";
};
&lpuart1 {
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink