Ran Wang 2a8a353958 armv8: Add workaround for USB erratum A-009798 ... The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>		2017-09-11 08:01:06 -07:00
..
arm11	ARM: Move SYS_CACHELINE_SIZE over to Kconfig	2016-08-26 17:04:46 -04:00
arm720t	arm: arm720t: Support CONFIG_SKIP_LOWLEVEL_INIT_ONLY	2017-06-09 13:39:31 -06:00
arm920t	common: ep93xx: Move arch-specific declarations out of common	2017-06-05 12:31:22 -04:00
arm926ejs	arch/arm/cpu/arm926ejs/spear/cpu.c: guard do_switch_ecc() with CONFIG_NAND_FSMC	2017-08-26 14:56:10 -04:00
arm946es	arm: Allow skipping of low-level init with I-cache on	2016-06-12 23:49:38 +02:00
arm1136	treewide: replace #include <asm/errno.h> with <linux/errno.h>	2016-09-23 17:55:42 -04:00
arm1176	arm: add save_boot_params for ARM1176	2016-11-21 14:07:31 -05:00
armv7	fsl-layerscape: Consolidate registers space defination for CCI-400 bus	2017-09-11 07:55:36 -07:00
armv7m	armv7m: mpu_config add missing break	2017-08-13 15:17:28 -04:00
armv8	armv8: Add workaround for USB erratum A-009798	2017-09-11 08:01:06 -07:00
pxa	arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD	2017-03-18 20:28:01 -04:00
sa1100	Remove various unused interrupt related code	2017-04-06 20:42:18 -04:00
Makefile	Various Makefiles: Add SPDX-License-Identifier tags	2015-11-10 09:19:52 -05:00
u-boot-spl.lds	spl: arm: Make sure to include all of the u_boot_list entries	2016-03-16 15:27:55 -04:00
u-boot.lds	Revert "ARM: fixed relocation using proper alignment"	2017-06-14 09:13:21 -04:00