fc843a02ac
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org> |
||
---|---|---|
.. | ||
Kconfig | ||
m5253evbe.c | ||
MAINTAINERS | ||
Makefile | ||
README |
Freescale Amadeus Plus M5253EVBE board ====================================== Hayden Fraser(Hayden.Fraser@freescale.com) Created 06/05/2007 =========================================== 1. SWITCH SETTINGS ================== 1.1 N/A 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== 2.1. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: SDR: 0x00000000-0x00ffffff SRAM0: 0x20010000-0x20017fff SRAM1: 0x20000000-0x2000ffff MBAR1: 0x10000000-0x4fffffff MBAR2: 0x80000000-0xCfffffff Flash: 0xffe00000-0xffffffff 3. DEFINITIONS AND COMPILATION ============================== 3.1 Explanation on NEW definitions in include/configs/M5253EVBE.h CONFIG_MCF52x2 Processor family CONFIG_MCF5253 MCF5253 specific CONFIG_M5253EVBE Amadeus Plus board specific CONFIG_SYS_CLK Define Amadeus Plus CPU Clock CONFIG_SYS_MBAR MBAR base address CONFIG_SYS_MBAR2 MBAR2 base address 3.2 Compilation export CROSS_COMPILE=/usr/local/freescale-coldfire-4.1-elf/bin/m68k-elf- cd u-boot-1-2-x make distclean make M5253EVBE_config make 4. SCREEN DUMP ============== 4.1 U-Boot 1.2.0 (Jun 18 2007 - 18:20:00) CPU: Freescale Coldfire MCF5253 at 62 MHz Board: Freescale MCF5253 EVBE DRAM: 16 MB FLASH: 2 MB In: serial Out: serial Err: serial => flinfo Bank # 1: CFI conformant FLASH (16 x 16) Size: 2 MB in 35 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x49 Erase timeout: 16384 ms, write timeout: 1 ms Sector Start Addresses: FFE00000 RO FFE04000 RO FFE06000 RO FFE08000 RO FFE10000 RO FFE20000 FFE30000 FFE40000 FFE50000 FFE60000 FFE70000 FFE80000 FFE90000 FFEA0000 FFEB0000 FFEC0000 FFED0000 FFEE0000 FFEF0000 FFF00000 FFF10000 FFF20000 FFF30000 FFF40000 FFF50000 FFF60000 FFF70000 FFF80000 FFF90000 FFFA0000 FFFB0000 FFFC0000 FFFD0000 FFFE0000 FFFF0000 => bdinfo boot_params = 0x00F62F90 memstart = 0x00000000 memsize = 0x01000000 flashstart = 0xFFE00000 flashsize = 0x00200000 flashoffset = 0x00000000 baudrate = 19200 bps => printenv bootdelay=5 baudrate=19200 stdin=serial stdout=serial stderr=serial Environment size: 134/8188 bytes => saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash... done Protected 1 sectors => 5. COMPILER ----------- To create U-Boot the CodeSourcery's version of the GNU Toolchain for the ColdFire architecture compiler set (freescale-coldfire-4.1-elf) from www.codesourcery.com was used. You can download it from:http://www.codesourcery.com/gnu_toolchains/coldfire/download.html compiler that you used - for example, codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M codesourcery_elf requires -MQ in rules.mk, old M68K 2.95.3 just -M