414cc15144
Use this new Kconfig to simplify the compilation conditions where appropriate. Signed-off-by: Simon Glass <sjg@chromium.org>
727 lines
18 KiB
C
727 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Freescale i.MX28 SSP MMC driver
|
|
*
|
|
* Copyright (C) 2019 DENX Software Engineering
|
|
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
|
|
*
|
|
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
|
|
* on behalf of DENX Software Engineering GmbH
|
|
*
|
|
* Based on code from LTIB:
|
|
* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
|
|
* Terry Lv
|
|
*
|
|
* Copyright 2007, Freescale Semiconductor, Inc
|
|
* Andy Fleming
|
|
*
|
|
* Based vaguely on the pxa mmc code:
|
|
* (C) Copyright 2003
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/mach-imx/dma.h>
|
|
#include <bouncebuf.h>
|
|
|
|
#define MXSMMC_MAX_TIMEOUT 10000
|
|
#define MXSMMC_SMALL_TRANSFER 512
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
struct mxsmmc_priv {
|
|
int id;
|
|
int (*mmc_is_wp)(int);
|
|
int (*mmc_cd)(int);
|
|
struct mmc_config cfg; /* mmc configuration */
|
|
struct mxs_dma_desc *desc;
|
|
uint32_t buswidth;
|
|
struct mxs_ssp_regs *regs;
|
|
};
|
|
#else /* CONFIG_IS_ENABLED(DM_MMC) */
|
|
#include <dm/device.h>
|
|
#include <dm/read.h>
|
|
#include <dt-structs.h>
|
|
|
|
struct mxsmmc_plat {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_fsl_imx23_mmc dtplat;
|
|
#endif
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
fdt_addr_t base;
|
|
int non_removable;
|
|
int buswidth;
|
|
int dma_id;
|
|
int clk_id;
|
|
};
|
|
|
|
struct mxsmmc_priv {
|
|
int clkid;
|
|
struct mxs_dma_desc *desc;
|
|
u32 buswidth;
|
|
struct mxs_ssp_regs *regs;
|
|
unsigned int dma_channel;
|
|
};
|
|
#endif
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
static int mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data);
|
|
|
|
static int mxsmmc_cd(struct mxsmmc_priv *priv)
|
|
{
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
|
|
if (priv->mmc_cd)
|
|
return priv->mmc_cd(priv->id);
|
|
|
|
return !(readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT);
|
|
}
|
|
|
|
static int mxsmmc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct mxsmmc_priv *priv = mmc->priv;
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
|
|
/* Set the clock speed */
|
|
if (mmc->clock)
|
|
mxs_set_ssp_busclock(priv->id, mmc->clock / 1000);
|
|
|
|
switch (mmc->bus_width) {
|
|
case 1:
|
|
priv->buswidth = SSP_CTRL0_BUS_WIDTH_ONE_BIT;
|
|
break;
|
|
case 4:
|
|
priv->buswidth = SSP_CTRL0_BUS_WIDTH_FOUR_BIT;
|
|
break;
|
|
case 8:
|
|
priv->buswidth = SSP_CTRL0_BUS_WIDTH_EIGHT_BIT;
|
|
break;
|
|
}
|
|
|
|
/* Set the bus width */
|
|
clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0,
|
|
SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth);
|
|
|
|
debug("MMC%d: Set %d bits bus width\n",
|
|
mmc->block_dev.devnum, mmc->bus_width);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxsmmc_init(struct mmc *mmc)
|
|
{
|
|
struct mxsmmc_priv *priv = mmc->priv;
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
|
|
/* Reset SSP */
|
|
mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
|
|
|
|
/* Reconfigure the SSP block for MMC operation */
|
|
writel(SSP_CTRL1_SSP_MODE_SD_MMC |
|
|
SSP_CTRL1_WORD_LENGTH_EIGHT_BITS |
|
|
SSP_CTRL1_DMA_ENABLE |
|
|
SSP_CTRL1_POLARITY |
|
|
SSP_CTRL1_RECV_TIMEOUT_IRQ_EN |
|
|
SSP_CTRL1_DATA_CRC_IRQ_EN |
|
|
SSP_CTRL1_DATA_TIMEOUT_IRQ_EN |
|
|
SSP_CTRL1_RESP_TIMEOUT_IRQ_EN |
|
|
SSP_CTRL1_RESP_ERR_IRQ_EN,
|
|
&ssp_regs->hw_ssp_ctrl1_set);
|
|
|
|
/* Set initial bit clock 400 KHz */
|
|
mxs_set_ssp_busclock(priv->id, 400);
|
|
|
|
/* Send initial 74 clock cycles (185 us @ 400 KHz)*/
|
|
writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set);
|
|
udelay(200);
|
|
writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_clr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mmc_ops mxsmmc_ops = {
|
|
.send_cmd = mxsmmc_send_cmd,
|
|
.set_ios = mxsmmc_set_ios,
|
|
.init = mxsmmc_init,
|
|
};
|
|
|
|
int mxsmmc_initialize(struct bd_info *bis, int id, int (*wp)(int),
|
|
int (*cd)(int))
|
|
{
|
|
struct mmc *mmc = NULL;
|
|
struct mxsmmc_priv *priv = NULL;
|
|
int ret;
|
|
const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id);
|
|
|
|
if (!mxs_ssp_bus_id_valid(id))
|
|
return -ENODEV;
|
|
|
|
priv = malloc(sizeof(struct mxsmmc_priv));
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->desc = mxs_dma_desc_alloc();
|
|
if (!priv->desc) {
|
|
free(priv);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->mmc_is_wp = wp;
|
|
priv->mmc_cd = cd;
|
|
priv->id = id;
|
|
priv->regs = mxs_ssp_regs_by_bus(id);
|
|
|
|
priv->cfg.name = "MXS MMC";
|
|
priv->cfg.ops = &mxsmmc_ops;
|
|
|
|
priv->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
priv->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT |
|
|
MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
|
|
/*
|
|
* SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz
|
|
* SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
|
|
* CLOCK_DIVIDE has to be an even value from 2 to 254, and
|
|
* CLOCK_RATE could be any integer from 0 to 255.
|
|
*/
|
|
priv->cfg.f_min = 400000;
|
|
priv->cfg.f_max = mxc_get_clock(MXC_SSP0_CLK + mxsmmc_clk_id)
|
|
* 1000 / 2;
|
|
priv->cfg.b_max = 0x20;
|
|
|
|
mmc = mmc_create(&priv->cfg, priv);
|
|
if (!mmc) {
|
|
mxs_dma_desc_free(priv->desc);
|
|
free(priv);
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_IS_ENABLED(DM_MMC) */
|
|
|
|
static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data)
|
|
{
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
uint32_t *data_ptr;
|
|
int timeout = MXSMMC_MAX_TIMEOUT;
|
|
uint32_t reg;
|
|
uint32_t data_count = data->blocksize * data->blocks;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
data_ptr = (uint32_t *)data->dest;
|
|
while (data_count && --timeout) {
|
|
reg = readl(&ssp_regs->hw_ssp_status);
|
|
if (!(reg & SSP_STATUS_FIFO_EMPTY)) {
|
|
*data_ptr++ = readl(&ssp_regs->hw_ssp_data);
|
|
data_count -= 4;
|
|
timeout = MXSMMC_MAX_TIMEOUT;
|
|
} else
|
|
udelay(1000);
|
|
}
|
|
} else {
|
|
data_ptr = (uint32_t *)data->src;
|
|
timeout *= 100;
|
|
while (data_count && --timeout) {
|
|
reg = readl(&ssp_regs->hw_ssp_status);
|
|
if (!(reg & SSP_STATUS_FIFO_FULL)) {
|
|
writel(*data_ptr++, &ssp_regs->hw_ssp_data);
|
|
data_count -= 4;
|
|
timeout = MXSMMC_MAX_TIMEOUT;
|
|
} else
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
return timeout ? 0 : -ECOMM;
|
|
}
|
|
|
|
static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
|
|
{
|
|
uint32_t data_count = data->blocksize * data->blocks;
|
|
int dmach;
|
|
struct mxs_dma_desc *desc = priv->desc;
|
|
void *addr;
|
|
unsigned int flags;
|
|
struct bounce_buffer bbstate;
|
|
|
|
memset(desc, 0, sizeof(struct mxs_dma_desc));
|
|
desc->address = (dma_addr_t)desc;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
|
|
addr = data->dest;
|
|
flags = GEN_BB_WRITE;
|
|
} else {
|
|
priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
|
|
addr = (void *)data->src;
|
|
flags = GEN_BB_READ;
|
|
}
|
|
|
|
bounce_buffer_start(&bbstate, addr, data_count, flags);
|
|
|
|
priv->desc->cmd.address = (dma_addr_t)bbstate.bounce_buffer;
|
|
|
|
priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM |
|
|
(data_count << MXS_DMA_DESC_BYTES_OFFSET);
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
|
|
#else
|
|
dmach = priv->dma_channel;
|
|
#endif
|
|
mxs_dma_desc_append(dmach, priv->desc);
|
|
if (mxs_dma_go(dmach)) {
|
|
bounce_buffer_stop(&bbstate);
|
|
return -ECOMM;
|
|
}
|
|
|
|
bounce_buffer_stop(&bbstate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
/*
|
|
* Sends a command out on the bus. Takes the mmc pointer,
|
|
* a command pointer, and an optional data pointer.
|
|
*/
|
|
static int
|
|
mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
struct mxsmmc_priv *priv = mmc->priv;
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
#else
|
|
static int
|
|
mxsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
struct mxsmmc_plat *plat = dev_get_plat(dev);
|
|
struct mxsmmc_priv *priv = dev_get_priv(dev);
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
struct mmc *mmc = &plat->mmc;
|
|
#endif
|
|
uint32_t reg;
|
|
int timeout;
|
|
uint32_t ctrl0;
|
|
int ret;
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
int devnum = mmc->block_dev.devnum;
|
|
#else
|
|
int devnum = mmc_get_blk_desc(mmc)->devnum;
|
|
#endif
|
|
debug("MMC%d: CMD%d\n", devnum, cmd->cmdidx);
|
|
|
|
/* Check bus busy */
|
|
timeout = MXSMMC_MAX_TIMEOUT;
|
|
while (--timeout) {
|
|
udelay(1000);
|
|
reg = readl(&ssp_regs->hw_ssp_status);
|
|
if (!(reg &
|
|
(SSP_STATUS_BUSY | SSP_STATUS_DATA_BUSY |
|
|
SSP_STATUS_CMD_BUSY))) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!timeout) {
|
|
printf("MMC%d: Bus busy timeout!\n", devnum);
|
|
return -ETIMEDOUT;
|
|
}
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
/* See if card is present */
|
|
if (!mxsmmc_cd(priv)) {
|
|
printf("MMC%d: No card detected!\n", devnum);
|
|
return -ENOMEDIUM;
|
|
}
|
|
#endif
|
|
/* Start building CTRL0 contents */
|
|
ctrl0 = priv->buswidth;
|
|
|
|
/* Set up command */
|
|
if (!(cmd->resp_type & MMC_RSP_CRC))
|
|
ctrl0 |= SSP_CTRL0_IGNORE_CRC;
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) /* Need to get response */
|
|
ctrl0 |= SSP_CTRL0_GET_RESP;
|
|
if (cmd->resp_type & MMC_RSP_136) /* It's a 136 bits response */
|
|
ctrl0 |= SSP_CTRL0_LONG_RESP;
|
|
|
|
if (data && (data->blocksize * data->blocks < MXSMMC_SMALL_TRANSFER))
|
|
writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_clr);
|
|
else
|
|
writel(SSP_CTRL1_DMA_ENABLE, &ssp_regs->hw_ssp_ctrl1_set);
|
|
|
|
/* Command index */
|
|
reg = readl(&ssp_regs->hw_ssp_cmd0);
|
|
reg &= ~(SSP_CMD0_CMD_MASK | SSP_CMD0_APPEND_8CYC);
|
|
reg |= cmd->cmdidx << SSP_CMD0_CMD_OFFSET;
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
reg |= SSP_CMD0_APPEND_8CYC;
|
|
writel(reg, &ssp_regs->hw_ssp_cmd0);
|
|
|
|
/* Command argument */
|
|
writel(cmd->cmdarg, &ssp_regs->hw_ssp_cmd1);
|
|
|
|
/* Set up data */
|
|
if (data) {
|
|
/* READ or WRITE */
|
|
if (data->flags & MMC_DATA_READ) {
|
|
ctrl0 |= SSP_CTRL0_READ;
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
} else if (priv->mmc_is_wp &&
|
|
priv->mmc_is_wp(devnum)) {
|
|
printf("MMC%d: Can not write a locked card!\n", devnum);
|
|
return -EOPNOTSUPP;
|
|
#endif
|
|
}
|
|
ctrl0 |= SSP_CTRL0_DATA_XFER;
|
|
|
|
reg = data->blocksize * data->blocks;
|
|
#if defined(CONFIG_MX23)
|
|
ctrl0 |= reg & SSP_CTRL0_XFER_COUNT_MASK;
|
|
|
|
clrsetbits_le32(&ssp_regs->hw_ssp_cmd0,
|
|
SSP_CMD0_BLOCK_SIZE_MASK | SSP_CMD0_BLOCK_COUNT_MASK,
|
|
((data->blocks - 1) << SSP_CMD0_BLOCK_COUNT_OFFSET) |
|
|
((ffs(data->blocksize) - 1) <<
|
|
SSP_CMD0_BLOCK_SIZE_OFFSET));
|
|
#elif defined(CONFIG_MX28)
|
|
writel(reg, &ssp_regs->hw_ssp_xfer_size);
|
|
|
|
reg = ((data->blocks - 1) <<
|
|
SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) |
|
|
((ffs(data->blocksize) - 1) <<
|
|
SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET);
|
|
writel(reg, &ssp_regs->hw_ssp_block_size);
|
|
#endif
|
|
}
|
|
|
|
/* Kick off the command */
|
|
ctrl0 |= SSP_CTRL0_WAIT_FOR_IRQ | SSP_CTRL0_ENABLE | SSP_CTRL0_RUN;
|
|
writel(ctrl0, &ssp_regs->hw_ssp_ctrl0);
|
|
|
|
/* Wait for the command to complete */
|
|
timeout = MXSMMC_MAX_TIMEOUT;
|
|
while (--timeout) {
|
|
udelay(1000);
|
|
reg = readl(&ssp_regs->hw_ssp_status);
|
|
if (!(reg & SSP_STATUS_CMD_BUSY))
|
|
break;
|
|
}
|
|
|
|
if (!timeout) {
|
|
printf("MMC%d: Command %d busy\n", devnum, cmd->cmdidx);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Check command timeout */
|
|
if (reg & SSP_STATUS_RESP_TIMEOUT) {
|
|
debug("MMC%d: Command %d timeout (status 0x%08x)\n",
|
|
devnum, cmd->cmdidx, reg);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Check command errors */
|
|
if (reg & (SSP_STATUS_RESP_CRC_ERR | SSP_STATUS_RESP_ERR)) {
|
|
printf("MMC%d: Command %d error (status 0x%08x)!\n",
|
|
devnum, cmd->cmdidx, reg);
|
|
return -ECOMM;
|
|
}
|
|
|
|
/* Copy response to response buffer */
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
cmd->response[3] = readl(&ssp_regs->hw_ssp_sdresp0);
|
|
cmd->response[2] = readl(&ssp_regs->hw_ssp_sdresp1);
|
|
cmd->response[1] = readl(&ssp_regs->hw_ssp_sdresp2);
|
|
cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp3);
|
|
} else
|
|
cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp0);
|
|
|
|
/* Return if no data to process */
|
|
if (!data)
|
|
return 0;
|
|
|
|
if (data->blocksize * data->blocks < MXSMMC_SMALL_TRANSFER) {
|
|
ret = mxsmmc_send_cmd_pio(priv, data);
|
|
if (ret) {
|
|
printf("MMC%d: Data timeout with command %d "
|
|
"(status 0x%08x)!\n", devnum, cmd->cmdidx, reg);
|
|
return ret;
|
|
}
|
|
} else {
|
|
ret = mxsmmc_send_cmd_dma(priv, data);
|
|
if (ret) {
|
|
printf("MMC%d: DMA transfer failed\n", devnum);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Check data errors */
|
|
reg = readl(&ssp_regs->hw_ssp_status);
|
|
if (reg &
|
|
(SSP_STATUS_TIMEOUT | SSP_STATUS_DATA_CRC_ERR |
|
|
SSP_STATUS_FIFO_OVRFLW | SSP_STATUS_FIFO_UNDRFLW)) {
|
|
printf("MMC%d: Data error with command %d (status 0x%08x)!\n",
|
|
devnum, cmd->cmdidx, reg);
|
|
return -ECOMM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_MMC)
|
|
/* Base numbers of i.MX2[38] clk for ssp0 IP block */
|
|
#define MXS_SSP_IMX23_CLKID_SSP0 33
|
|
#define MXS_SSP_IMX28_CLKID_SSP0 46
|
|
|
|
static int mxsmmc_get_cd(struct udevice *dev)
|
|
{
|
|
struct mxsmmc_plat *plat = dev_get_plat(dev);
|
|
struct mxsmmc_priv *priv = dev_get_priv(dev);
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
|
|
if (plat->non_removable)
|
|
return 1;
|
|
|
|
return !(readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT);
|
|
}
|
|
|
|
static int mxsmmc_set_ios(struct udevice *dev)
|
|
{
|
|
struct mxsmmc_plat *plat = dev_get_plat(dev);
|
|
struct mxsmmc_priv *priv = dev_get_priv(dev);
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
struct mmc *mmc = &plat->mmc;
|
|
|
|
/* Set the clock speed */
|
|
if (mmc->clock)
|
|
mxs_set_ssp_busclock(priv->clkid, mmc->clock / 1000);
|
|
|
|
switch (mmc->bus_width) {
|
|
case 1:
|
|
priv->buswidth = SSP_CTRL0_BUS_WIDTH_ONE_BIT;
|
|
break;
|
|
case 4:
|
|
priv->buswidth = SSP_CTRL0_BUS_WIDTH_FOUR_BIT;
|
|
break;
|
|
case 8:
|
|
priv->buswidth = SSP_CTRL0_BUS_WIDTH_EIGHT_BIT;
|
|
break;
|
|
}
|
|
|
|
/* Set the bus width */
|
|
clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0,
|
|
SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth);
|
|
|
|
debug("MMC%d: Set %d bits bus width\n", mmc_get_blk_desc(mmc)->devnum,
|
|
mmc->bus_width);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxsmmc_init(struct udevice *dev)
|
|
{
|
|
struct mxsmmc_priv *priv = dev_get_priv(dev);
|
|
struct mxs_ssp_regs *ssp_regs = priv->regs;
|
|
|
|
/* Reset SSP */
|
|
mxs_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
|
|
|
|
/* Reconfigure the SSP block for MMC operation */
|
|
writel(SSP_CTRL1_SSP_MODE_SD_MMC |
|
|
SSP_CTRL1_WORD_LENGTH_EIGHT_BITS |
|
|
SSP_CTRL1_DMA_ENABLE |
|
|
SSP_CTRL1_POLARITY |
|
|
SSP_CTRL1_RECV_TIMEOUT_IRQ_EN |
|
|
SSP_CTRL1_DATA_CRC_IRQ_EN |
|
|
SSP_CTRL1_DATA_TIMEOUT_IRQ_EN |
|
|
SSP_CTRL1_RESP_TIMEOUT_IRQ_EN |
|
|
SSP_CTRL1_RESP_ERR_IRQ_EN,
|
|
&ssp_regs->hw_ssp_ctrl1_set);
|
|
|
|
/* Set initial bit clock 400 KHz */
|
|
mxs_set_ssp_busclock(priv->clkid, 400);
|
|
|
|
/* Send initial 74 clock cycles (185 us @ 400 KHz)*/
|
|
writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set);
|
|
udelay(200);
|
|
writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_clr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxsmmc_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct mxsmmc_plat *plat = dev_get_plat(dev);
|
|
struct mxsmmc_priv *priv = dev_get_priv(dev);
|
|
struct blk_desc *bdesc;
|
|
struct mmc *mmc;
|
|
int ret, clkid;
|
|
|
|
debug("%s: probe\n", __func__);
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_fsl_imx23_mmc *dtplat = &plat->dtplat;
|
|
struct phandle_1_arg *p1a = &dtplat->clocks[0];
|
|
|
|
priv->buswidth = dtplat->bus_width;
|
|
priv->regs = (struct mxs_ssp_regs *)dtplat->reg[0];
|
|
priv->dma_channel = dtplat->dmas[1];
|
|
clkid = p1a->arg[0];
|
|
plat->non_removable = dtplat->non_removable;
|
|
|
|
debug("OF_PLATDATA: regs: 0x%p bw: %d clkid: %d non_removable: %d\n",
|
|
priv->regs, priv->buswidth, clkid, plat->non_removable);
|
|
#else
|
|
priv->regs = (struct mxs_ssp_regs *)plat->base;
|
|
priv->dma_channel = plat->dma_id;
|
|
clkid = plat->clk_id;
|
|
#endif
|
|
|
|
#ifdef CONFIG_MX28
|
|
priv->clkid = clkid - MXS_SSP_IMX28_CLKID_SSP0;
|
|
#else /* CONFIG_MX23 */
|
|
priv->clkid = clkid - MXS_SSP_IMX23_CLKID_SSP0;
|
|
#endif
|
|
mmc = &plat->mmc;
|
|
mmc->cfg = &plat->cfg;
|
|
mmc->dev = dev;
|
|
|
|
priv->desc = mxs_dma_desc_alloc();
|
|
if (!priv->desc) {
|
|
printf("%s: Cannot allocate DMA descriptor\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = mxs_dma_init_channel(priv->dma_channel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
plat->cfg.name = "MXS MMC";
|
|
plat->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
plat->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT |
|
|
MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
|
|
/*
|
|
* SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz
|
|
* SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
|
|
* CLOCK_DIVIDE has to be an even value from 2 to 254, and
|
|
* CLOCK_RATE could be any integer from 0 to 255.
|
|
*/
|
|
plat->cfg.f_min = 400000;
|
|
plat->cfg.f_max = mxc_get_clock(MXC_SSP0_CLK + priv->clkid) * 1000 / 2;
|
|
plat->cfg.b_max = 0x20;
|
|
|
|
bdesc = mmc_get_blk_desc(mmc);
|
|
if (!bdesc) {
|
|
printf("%s: No block device descriptor!\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (plat->non_removable)
|
|
bdesc->removable = 0;
|
|
|
|
ret = mxsmmc_init(dev);
|
|
if (ret)
|
|
printf("%s: MMC%d init error %d\n", __func__,
|
|
bdesc->devnum, ret);
|
|
|
|
/* Set the initial clock speed */
|
|
mmc_set_clock(mmc, 400000, MMC_CLK_ENABLE);
|
|
|
|
upriv->mmc = mmc;
|
|
|
|
return 0;
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(BLK)
|
|
static int mxsmmc_bind(struct udevice *dev)
|
|
{
|
|
struct mxsmmc_plat *plat = dev_get_plat(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
#endif
|
|
|
|
static const struct dm_mmc_ops mxsmmc_ops = {
|
|
.get_cd = mxsmmc_get_cd,
|
|
.send_cmd = mxsmmc_send_cmd,
|
|
.set_ios = mxsmmc_set_ios,
|
|
};
|
|
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
static int mxsmmc_of_to_plat(struct udevice *bus)
|
|
{
|
|
struct mxsmmc_plat *plat = dev_get_plat(bus);
|
|
u32 prop[2];
|
|
int ret;
|
|
|
|
plat->base = dev_read_addr(bus);
|
|
plat->buswidth =
|
|
dev_read_u32_default(bus, "bus-width", 1);
|
|
plat->non_removable = dev_read_bool(bus, "non-removable");
|
|
|
|
ret = dev_read_u32_array(bus, "dmas", prop, ARRAY_SIZE(prop));
|
|
if (ret) {
|
|
printf("%s: Reading 'dmas' property failed!\n", __func__);
|
|
return ret;
|
|
}
|
|
plat->dma_id = prop[1];
|
|
|
|
ret = dev_read_u32_array(bus, "clocks", prop, ARRAY_SIZE(prop));
|
|
if (ret) {
|
|
printf("%s: Reading 'clocks' property failed!\n", __func__);
|
|
return ret;
|
|
}
|
|
plat->clk_id = prop[1];
|
|
|
|
debug("%s: base=0x%x, bus_width=%d %s dma_id=%d clk_id=%d\n",
|
|
__func__, (uint)plat->base, plat->buswidth,
|
|
plat->non_removable ? "non-removable" : NULL,
|
|
plat->dma_id, plat->clk_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mxsmmc_ids[] = {
|
|
{ .compatible = "fsl,imx23-mmc", },
|
|
{ .compatible = "fsl,imx28-mmc", },
|
|
{ /* sentinel */ }
|
|
};
|
|
#endif
|
|
|
|
U_BOOT_DRIVER(fsl_imx23_mmc) = {
|
|
.name = "fsl_imx23_mmc",
|
|
.id = UCLASS_MMC,
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
.of_match = mxsmmc_ids,
|
|
.of_to_plat = mxsmmc_of_to_plat,
|
|
#endif
|
|
.ops = &mxsmmc_ops,
|
|
#if CONFIG_IS_ENABLED(BLK)
|
|
.bind = mxsmmc_bind,
|
|
#endif
|
|
.probe = mxsmmc_probe,
|
|
.priv_auto = sizeof(struct mxsmmc_priv),
|
|
.plat_auto = sizeof(struct mxsmmc_plat),
|
|
};
|
|
|
|
DM_DRIVER_ALIAS(fsl_imx23_mmc, fsl_imx28_mmc)
|
|
#endif /* CONFIG_DM_MMC */
|