1a03182967
Migrate the dw_ti driver to use the common DW PCIe helpers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
362 lines
8.3 KiB
C
362 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Texas Instruments, Inc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <pci.h>
|
|
#include <generic-phy.h>
|
|
#include <power-domain.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm-generic/gpio.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
|
|
#include "pcie_dw_common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define PCIE_VENDORID_MASK GENMASK(15, 0)
|
|
#define PCIE_DEVICEID_SHIFT 16
|
|
|
|
#define PCIE_LINK_CAPABILITY 0x7c
|
|
#define PCIE_LINK_CTL_2 0xa0
|
|
#define TARGET_LINK_SPEED_MASK 0xf
|
|
#define LINK_SPEED_GEN_1 0x1
|
|
#define LINK_SPEED_GEN_2 0x2
|
|
#define LINK_SPEED_GEN_3 0x3
|
|
|
|
#define PCIE_MISC_CONTROL_1_OFF 0x8bc
|
|
#define PCIE_DBI_RO_WR_EN BIT(0)
|
|
|
|
#define PLR_OFFSET 0x700
|
|
#define PCIE_PORT_DEBUG0 (PLR_OFFSET + 0x28)
|
|
#define PORT_LOGIC_LTSSM_STATE_MASK 0x1f
|
|
#define PORT_LOGIC_LTSSM_STATE_L0 0x11
|
|
|
|
#define PCIE_LINK_UP_TIMEOUT_MS 100
|
|
|
|
/* Offsets from App base */
|
|
#define PCIE_CMD_STATUS 0x04
|
|
#define LTSSM_EN_VAL BIT(0)
|
|
|
|
|
|
#define AM654_PCIE_DEV_TYPE_MASK 0x3
|
|
#define EP 0x0
|
|
#define LEG_EP 0x1
|
|
#define RC 0x2
|
|
|
|
/**
|
|
* struct pcie_dw_ti - TI DW PCIe controller state
|
|
*
|
|
* @pci: The common PCIe DW structure
|
|
* @app_base: The base address of application register space
|
|
*/
|
|
struct pcie_dw_ti {
|
|
/* Must be first member of the struct */
|
|
struct pcie_dw dw;
|
|
void *app_base;
|
|
};
|
|
|
|
enum dw_pcie_device_mode {
|
|
DW_PCIE_UNKNOWN_TYPE,
|
|
DW_PCIE_EP_TYPE,
|
|
DW_PCIE_LEG_EP_TYPE,
|
|
DW_PCIE_RC_TYPE,
|
|
};
|
|
|
|
/**
|
|
* pcie_dw_configure() - Configure link capabilities and speed
|
|
*
|
|
* @regs_base: A pointer to the PCIe controller registers
|
|
* @cap_speed: The capabilities and speed to configure
|
|
*
|
|
* Configure the link capabilities and speed in the PCIe root complex.
|
|
*/
|
|
static void pcie_dw_configure(struct pcie_dw_ti *pci, u32 cap_speed)
|
|
{
|
|
u32 val;
|
|
|
|
dw_pcie_dbi_write_enable(&pci->dw, true);
|
|
|
|
val = readl(pci->dw.dbi_base + PCIE_LINK_CAPABILITY);
|
|
val &= ~TARGET_LINK_SPEED_MASK;
|
|
val |= cap_speed;
|
|
writel(val, pci->dw.dbi_base + PCIE_LINK_CAPABILITY);
|
|
|
|
val = readl(pci->dw.dbi_base + PCIE_LINK_CTL_2);
|
|
val &= ~TARGET_LINK_SPEED_MASK;
|
|
val |= cap_speed;
|
|
writel(val, pci->dw.dbi_base + PCIE_LINK_CTL_2);
|
|
|
|
dw_pcie_dbi_write_enable(&pci->dw, false);
|
|
}
|
|
|
|
/**
|
|
* is_link_up() - Return the link state
|
|
*
|
|
* @regs_base: A pointer to the PCIe DBICS registers
|
|
*
|
|
* Return: 1 (true) for active line and 0 (false) for no link
|
|
*/
|
|
static int is_link_up(struct pcie_dw_ti *pci)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(pci->dw.dbi_base + PCIE_PORT_DEBUG0);
|
|
val &= PORT_LOGIC_LTSSM_STATE_MASK;
|
|
|
|
return (val == PORT_LOGIC_LTSSM_STATE_L0);
|
|
}
|
|
|
|
/**
|
|
* wait_link_up() - Wait for the link to come up
|
|
*
|
|
* @regs_base: A pointer to the PCIe controller registers
|
|
*
|
|
* Return: 1 (true) for active line and 0 (false) for no link (timeout)
|
|
*/
|
|
static int wait_link_up(struct pcie_dw_ti *pci)
|
|
{
|
|
unsigned long timeout;
|
|
|
|
timeout = get_timer(0) + PCIE_LINK_UP_TIMEOUT_MS;
|
|
while (!is_link_up(pci)) {
|
|
if (get_timer(0) > timeout)
|
|
return 0;
|
|
};
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int pcie_dw_ti_pcie_link_up(struct pcie_dw_ti *pci, u32 cap_speed)
|
|
{
|
|
u32 val;
|
|
|
|
if (is_link_up(pci)) {
|
|
printf("PCI Link already up before configuration!\n");
|
|
return 1;
|
|
}
|
|
|
|
/* DW pre link configurations */
|
|
pcie_dw_configure(pci, cap_speed);
|
|
|
|
/* Initiate link training */
|
|
val = readl(pci->app_base + PCIE_CMD_STATUS);
|
|
val |= LTSSM_EN_VAL;
|
|
writel(val, pci->app_base + PCIE_CMD_STATUS);
|
|
|
|
/* Check that link was established */
|
|
if (!wait_link_up(pci))
|
|
return 0;
|
|
|
|
/*
|
|
* Link can be established in Gen 1. still need to wait
|
|
* till MAC nagaotiation is completed
|
|
*/
|
|
udelay(100);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int pcie_am654_set_mode(struct pcie_dw_ti *pci,
|
|
enum dw_pcie_device_mode mode)
|
|
{
|
|
struct regmap *syscon;
|
|
u32 val;
|
|
u32 mask;
|
|
int ret;
|
|
|
|
syscon = syscon_regmap_lookup_by_phandle(pci->dw.dev,
|
|
"ti,syscon-pcie-mode");
|
|
if (IS_ERR(syscon))
|
|
return 0;
|
|
|
|
mask = AM654_PCIE_DEV_TYPE_MASK;
|
|
|
|
switch (mode) {
|
|
case DW_PCIE_RC_TYPE:
|
|
val = RC;
|
|
break;
|
|
case DW_PCIE_EP_TYPE:
|
|
val = EP;
|
|
break;
|
|
default:
|
|
dev_err(pci->dw.dev, "INVALID device type %d\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(syscon, 0, mask, val);
|
|
if (ret) {
|
|
dev_err(pci->dw.dev, "failed to set pcie mode\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcie_dw_init_id(struct pcie_dw_ti *pci)
|
|
{
|
|
struct regmap *devctrl_regs;
|
|
unsigned int id;
|
|
int ret;
|
|
|
|
devctrl_regs = syscon_regmap_lookup_by_phandle(pci->dw.dev,
|
|
"ti,syscon-pcie-id");
|
|
if (IS_ERR(devctrl_regs))
|
|
return PTR_ERR(devctrl_regs);
|
|
|
|
ret = regmap_read(devctrl_regs, 0, &id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dw_pcie_dbi_write_enable(&pci->dw, true);
|
|
writew(id & PCIE_VENDORID_MASK, pci->dw.dbi_base + PCI_VENDOR_ID);
|
|
writew(id >> PCIE_DEVICEID_SHIFT, pci->dw.dbi_base + PCI_DEVICE_ID);
|
|
dw_pcie_dbi_write_enable(&pci->dw, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pcie_dw_ti_probe() - Probe the PCIe bus for active link
|
|
*
|
|
* @dev: A pointer to the device being operated on
|
|
*
|
|
* Probe for an active link on the PCIe bus and configure the controller
|
|
* to enable this port.
|
|
*
|
|
* Return: 0 on success, else -ENODEV
|
|
*/
|
|
static int pcie_dw_ti_probe(struct udevice *dev)
|
|
{
|
|
struct pcie_dw_ti *pci = dev_get_priv(dev);
|
|
struct udevice *ctlr = pci_get_controller(dev);
|
|
struct pci_controller *hose = dev_get_uclass_priv(ctlr);
|
|
struct power_domain pci_pwrdmn;
|
|
struct phy phy0, phy1;
|
|
int ret;
|
|
|
|
ret = power_domain_get_by_index(dev, &pci_pwrdmn, 0);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get power domain\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = power_domain_on(&pci_pwrdmn);
|
|
if (ret) {
|
|
dev_err(dev, "Power domain on failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = generic_phy_get_by_name(dev, "pcie-phy0", &phy0);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to get phy0");
|
|
return ret;
|
|
}
|
|
generic_phy_reset(&phy0);
|
|
generic_phy_init(&phy0);
|
|
generic_phy_power_on(&phy0);
|
|
|
|
ret = generic_phy_get_by_name(dev, "pcie-phy1", &phy1);
|
|
if (ret) {
|
|
dev_err(dev, "Unable to get phy1");
|
|
return ret;
|
|
}
|
|
generic_phy_reset(&phy1);
|
|
generic_phy_init(&phy1);
|
|
generic_phy_power_on(&phy1);
|
|
|
|
pci->dw.first_busno = dev_seq(dev);
|
|
pci->dw.dev = dev;
|
|
|
|
pcie_dw_setup_host(&pci->dw);
|
|
pcie_dw_init_id(pci);
|
|
|
|
if (device_is_compatible(dev, "ti,am654-pcie-rc"))
|
|
pcie_am654_set_mode(pci, DW_PCIE_RC_TYPE);
|
|
|
|
if (!pcie_dw_ti_pcie_link_up(pci, LINK_SPEED_GEN_2)) {
|
|
printf("PCIE-%d: Link down\n", dev_seq(dev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
printf("PCIE-%d: Link up (Gen%d-x%d, Bus%d)\n", dev_seq(dev),
|
|
pcie_dw_get_link_speed(&pci->dw),
|
|
pcie_dw_get_link_width(&pci->dw),
|
|
hose->first_busno);
|
|
|
|
pcie_dw_prog_outbound_atu_unroll(&pci->dw, PCIE_ATU_REGION_INDEX0,
|
|
PCIE_ATU_TYPE_MEM,
|
|
pci->dw.mem.phys_start,
|
|
pci->dw.mem.bus_start, pci->dw.mem.size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pcie_dw_ti_of_to_plat() - Translate from DT to device state
|
|
*
|
|
* @dev: A pointer to the device being operated on
|
|
*
|
|
* Translate relevant data from the device tree pertaining to device @dev into
|
|
* state that the driver will later make use of. This state is stored in the
|
|
* device's private data structure.
|
|
*
|
|
* Return: 0 on success, else -EINVAL
|
|
*/
|
|
static int pcie_dw_ti_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct pcie_dw_ti *pcie = dev_get_priv(dev);
|
|
|
|
/* Get the controller base address */
|
|
pcie->dw.dbi_base = (void *)dev_read_addr_name(dev, "dbics");
|
|
if ((fdt_addr_t)pcie->dw.dbi_base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
/* Get the config space base address and size */
|
|
pcie->dw.cfg_base = (void *)dev_read_addr_size_name(dev, "config",
|
|
&pcie->dw.cfg_size);
|
|
if ((fdt_addr_t)pcie->dw.cfg_base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
/* Get the iATU base address and size */
|
|
pcie->dw.atu_base = (void *)dev_read_addr_name(dev, "atu");
|
|
if ((fdt_addr_t)pcie->dw.atu_base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
/* Get the app base address and size */
|
|
pcie->app_base = (void *)dev_read_addr_name(dev, "app");
|
|
if ((fdt_addr_t)pcie->app_base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_pci_ops pcie_dw_ti_ops = {
|
|
.read_config = pcie_dw_read_config,
|
|
.write_config = pcie_dw_write_config,
|
|
};
|
|
|
|
static const struct udevice_id pcie_dw_ti_ids[] = {
|
|
{ .compatible = "ti,am654-pcie-rc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pcie_dw_ti) = {
|
|
.name = "pcie_dw_ti",
|
|
.id = UCLASS_PCI,
|
|
.of_match = pcie_dw_ti_ids,
|
|
.ops = &pcie_dw_ti_ops,
|
|
.of_to_plat = pcie_dw_ti_of_to_plat,
|
|
.probe = pcie_dw_ti_probe,
|
|
.priv_auto = sizeof(struct pcie_dw_ti),
|
|
};
|