83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
652 lines
16 KiB
C
652 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* TI QSPI driver
|
|
*
|
|
* Copyright (C) 2013, Texas Instruments, Incorporated
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <dm.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/omap_gpio.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/ti-common/ti-edma3.h>
|
|
#include <linux/kernel.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* ti qpsi register bit masks */
|
|
#define QSPI_TIMEOUT 2000000
|
|
#define QSPI_FCLK 192000000
|
|
#define QSPI_DRA7XX_FCLK 76800000
|
|
#define QSPI_WLEN_MAX_BITS 128
|
|
#define QSPI_WLEN_MAX_BYTES (QSPI_WLEN_MAX_BITS >> 3)
|
|
#define QSPI_WLEN_MASK QSPI_WLEN(QSPI_WLEN_MAX_BITS)
|
|
/* clock control */
|
|
#define QSPI_CLK_EN BIT(31)
|
|
#define QSPI_CLK_DIV_MAX 0xffff
|
|
/* command */
|
|
#define QSPI_EN_CS(n) (n << 28)
|
|
#define QSPI_WLEN(n) ((n-1) << 19)
|
|
#define QSPI_3_PIN BIT(18)
|
|
#define QSPI_RD_SNGL BIT(16)
|
|
#define QSPI_WR_SNGL (2 << 16)
|
|
#define QSPI_INVAL (4 << 16)
|
|
#define QSPI_RD_QUAD (7 << 16)
|
|
/* device control */
|
|
#define QSPI_DD(m, n) (m << (3 + n*8))
|
|
#define QSPI_CKPHA(n) (1 << (2 + n*8))
|
|
#define QSPI_CSPOL(n) (1 << (1 + n*8))
|
|
#define QSPI_CKPOL(n) (1 << (n*8))
|
|
/* status */
|
|
#define QSPI_WC BIT(1)
|
|
#define QSPI_BUSY BIT(0)
|
|
#define QSPI_WC_BUSY (QSPI_WC | QSPI_BUSY)
|
|
#define QSPI_XFER_DONE QSPI_WC
|
|
#define MM_SWITCH 0x01
|
|
#define MEM_CS(cs) ((cs + 1) << 8)
|
|
#define MEM_CS_UNSELECT 0xfffff8ff
|
|
#define MMAP_START_ADDR_DRA 0x5c000000
|
|
#define MMAP_START_ADDR_AM43x 0x30000000
|
|
#define CORE_CTRL_IO 0x4a002558
|
|
|
|
#define QSPI_CMD_READ (0x3 << 0)
|
|
#define QSPI_CMD_READ_DUAL (0x6b << 0)
|
|
#define QSPI_CMD_READ_QUAD (0x6c << 0)
|
|
#define QSPI_CMD_READ_FAST (0x0b << 0)
|
|
#define QSPI_SETUP0_NUM_A_BYTES (0x3 << 8)
|
|
#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
|
|
#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10)
|
|
#define QSPI_SETUP0_READ_NORMAL (0x0 << 12)
|
|
#define QSPI_SETUP0_READ_DUAL (0x1 << 12)
|
|
#define QSPI_SETUP0_READ_QUAD (0x3 << 12)
|
|
#define QSPI_CMD_WRITE (0x12 << 16)
|
|
#define QSPI_NUM_DUMMY_BITS (0x0 << 24)
|
|
|
|
/* ti qspi register set */
|
|
struct ti_qspi_regs {
|
|
u32 pid;
|
|
u32 pad0[3];
|
|
u32 sysconfig;
|
|
u32 pad1[3];
|
|
u32 int_stat_raw;
|
|
u32 int_stat_en;
|
|
u32 int_en_set;
|
|
u32 int_en_ctlr;
|
|
u32 intc_eoi;
|
|
u32 pad2[3];
|
|
u32 clk_ctrl;
|
|
u32 dc;
|
|
u32 cmd;
|
|
u32 status;
|
|
u32 data;
|
|
u32 setup0;
|
|
u32 setup1;
|
|
u32 setup2;
|
|
u32 setup3;
|
|
u32 memswitch;
|
|
u32 data1;
|
|
u32 data2;
|
|
u32 data3;
|
|
};
|
|
|
|
/* ti qspi priv */
|
|
struct ti_qspi_priv {
|
|
#ifndef CONFIG_DM_SPI
|
|
struct spi_slave slave;
|
|
#else
|
|
void *memory_map;
|
|
uint max_hz;
|
|
u32 num_cs;
|
|
#endif
|
|
struct ti_qspi_regs *base;
|
|
void *ctrl_mod_mmap;
|
|
ulong fclk;
|
|
unsigned int mode;
|
|
u32 cmd;
|
|
u32 dc;
|
|
};
|
|
|
|
static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
|
|
{
|
|
uint clk_div;
|
|
|
|
if (!hz)
|
|
clk_div = 0;
|
|
else
|
|
clk_div = DIV_ROUND_UP(priv->fclk, hz) - 1;
|
|
|
|
/* truncate clk_div value to QSPI_CLK_DIV_MAX */
|
|
if (clk_div > QSPI_CLK_DIV_MAX)
|
|
clk_div = QSPI_CLK_DIV_MAX;
|
|
|
|
debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
|
|
|
|
/* disable SCLK */
|
|
writel(readl(&priv->base->clk_ctrl) & ~QSPI_CLK_EN,
|
|
&priv->base->clk_ctrl);
|
|
/* enable SCLK and program the clk divider */
|
|
writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
|
|
}
|
|
|
|
static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
|
|
{
|
|
writel(priv->cmd | QSPI_INVAL, &priv->base->cmd);
|
|
/* dummy readl to ensure bus sync */
|
|
readl(&priv->base->cmd);
|
|
}
|
|
|
|
static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
|
|
{
|
|
priv->dc = 0;
|
|
if (mode & SPI_CPHA)
|
|
priv->dc |= QSPI_CKPHA(0);
|
|
if (mode & SPI_CPOL)
|
|
priv->dc |= QSPI_CKPOL(0);
|
|
if (mode & SPI_CS_HIGH)
|
|
priv->dc |= QSPI_CSPOL(0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
|
|
{
|
|
writel(priv->dc, &priv->base->dc);
|
|
writel(0, &priv->base->cmd);
|
|
writel(0, &priv->base->data);
|
|
|
|
priv->dc <<= cs * 8;
|
|
writel(priv->dc, &priv->base->dc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
|
|
{
|
|
writel(0, &priv->base->dc);
|
|
writel(0, &priv->base->cmd);
|
|
writel(0, &priv->base->data);
|
|
}
|
|
|
|
static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(ctrl_mod_mmap);
|
|
if (enable)
|
|
val |= MEM_CS(cs);
|
|
else
|
|
val &= MEM_CS_UNSELECT;
|
|
writel(val, ctrl_mod_mmap);
|
|
}
|
|
|
|
static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags,
|
|
u32 cs)
|
|
{
|
|
uint words = bitlen >> 3; /* fixed 8-bit word length */
|
|
const uchar *txp = dout;
|
|
uchar *rxp = din;
|
|
uint status;
|
|
int timeout;
|
|
|
|
/* Setup mmap flags */
|
|
if (flags & SPI_XFER_MMAP) {
|
|
writel(MM_SWITCH, &priv->base->memswitch);
|
|
if (priv->ctrl_mod_mmap)
|
|
ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true);
|
|
return 0;
|
|
} else if (flags & SPI_XFER_MMAP_END) {
|
|
writel(~MM_SWITCH, &priv->base->memswitch);
|
|
if (priv->ctrl_mod_mmap)
|
|
ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false);
|
|
return 0;
|
|
}
|
|
|
|
if (bitlen == 0)
|
|
return -1;
|
|
|
|
if (bitlen % 8) {
|
|
debug("spi_xfer: Non byte aligned SPI transfer\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Setup command reg */
|
|
priv->cmd = 0;
|
|
priv->cmd |= QSPI_WLEN(8);
|
|
priv->cmd |= QSPI_EN_CS(cs);
|
|
if (priv->mode & SPI_3WIRE)
|
|
priv->cmd |= QSPI_3_PIN;
|
|
priv->cmd |= 0xfff;
|
|
|
|
while (words) {
|
|
u8 xfer_len = 0;
|
|
|
|
if (txp) {
|
|
u32 cmd = priv->cmd;
|
|
|
|
if (words >= QSPI_WLEN_MAX_BYTES) {
|
|
u32 *txbuf = (u32 *)txp;
|
|
u32 data;
|
|
|
|
data = cpu_to_be32(*txbuf++);
|
|
writel(data, &priv->base->data3);
|
|
data = cpu_to_be32(*txbuf++);
|
|
writel(data, &priv->base->data2);
|
|
data = cpu_to_be32(*txbuf++);
|
|
writel(data, &priv->base->data1);
|
|
data = cpu_to_be32(*txbuf++);
|
|
writel(data, &priv->base->data);
|
|
cmd &= ~QSPI_WLEN_MASK;
|
|
cmd |= QSPI_WLEN(QSPI_WLEN_MAX_BITS);
|
|
xfer_len = QSPI_WLEN_MAX_BYTES;
|
|
} else {
|
|
writeb(*txp, &priv->base->data);
|
|
xfer_len = 1;
|
|
}
|
|
debug("tx cmd %08x dc %08x\n",
|
|
cmd | QSPI_WR_SNGL, priv->dc);
|
|
writel(cmd | QSPI_WR_SNGL, &priv->base->cmd);
|
|
status = readl(&priv->base->status);
|
|
timeout = QSPI_TIMEOUT;
|
|
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
|
|
if (--timeout < 0) {
|
|
printf("spi_xfer: TX timeout!\n");
|
|
return -1;
|
|
}
|
|
status = readl(&priv->base->status);
|
|
}
|
|
txp += xfer_len;
|
|
debug("tx done, status %08x\n", status);
|
|
}
|
|
if (rxp) {
|
|
debug("rx cmd %08x dc %08x\n",
|
|
((u32)(priv->cmd | QSPI_RD_SNGL)), priv->dc);
|
|
writel(priv->cmd | QSPI_RD_SNGL, &priv->base->cmd);
|
|
status = readl(&priv->base->status);
|
|
timeout = QSPI_TIMEOUT;
|
|
while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
|
|
if (--timeout < 0) {
|
|
printf("spi_xfer: RX timeout!\n");
|
|
return -1;
|
|
}
|
|
status = readl(&priv->base->status);
|
|
}
|
|
*rxp++ = readl(&priv->base->data);
|
|
xfer_len = 1;
|
|
debug("rx done, status %08x, read %02x\n",
|
|
status, *(rxp-1));
|
|
}
|
|
words -= xfer_len;
|
|
}
|
|
|
|
/* Terminate frame */
|
|
if (flags & SPI_XFER_END)
|
|
ti_qspi_cs_deactivate(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* TODO: control from sf layer to here through dm-spi */
|
|
#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
|
|
void spi_flash_copy_mmap(void *data, void *offset, size_t len)
|
|
{
|
|
unsigned int addr = (unsigned int) (data);
|
|
unsigned int edma_slot_num = 1;
|
|
|
|
/* Invalidate the area, so no writeback into the RAM races with DMA */
|
|
invalidate_dcache_range(addr, addr + roundup(len, ARCH_DMA_MINALIGN));
|
|
|
|
/* enable edma3 clocks */
|
|
enable_edma3_clocks();
|
|
|
|
/* Call edma3 api to do actual DMA transfer */
|
|
edma3_transfer(EDMA3_BASE, edma_slot_num, data, offset, len);
|
|
|
|
/* disable edma3 clocks */
|
|
disable_edma3_clocks();
|
|
|
|
*((unsigned int *)offset) += len;
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_DM_SPI
|
|
|
|
static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
|
|
{
|
|
return container_of(slave, struct ti_qspi_priv, slave);
|
|
}
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
/* CS handled in xfer */
|
|
return;
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
|
|
ti_qspi_cs_deactivate(priv);
|
|
}
|
|
|
|
void spi_init(void)
|
|
{
|
|
/* nothing to do */
|
|
}
|
|
|
|
static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
|
|
{
|
|
u32 memval = 0;
|
|
|
|
#ifdef CONFIG_QSPI_QUAD_SUPPORT
|
|
struct spi_slave *slave = &priv->slave;
|
|
memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
|
|
QSPI_SETUP0_NUM_D_BYTES_8_BITS |
|
|
QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
|
|
QSPI_NUM_DUMMY_BITS);
|
|
slave->mode |= SPI_RX_QUAD;
|
|
#else
|
|
memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
|
|
QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
|
|
QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
|
|
QSPI_NUM_DUMMY_BITS;
|
|
#endif
|
|
|
|
writel(memval, &priv->base->setup0);
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct ti_qspi_priv *priv;
|
|
|
|
#ifdef CONFIG_AM43XX
|
|
gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
|
|
gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
|
|
#endif
|
|
|
|
priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
|
|
if (!priv) {
|
|
printf("SPI_error: Fail to allocate ti_qspi_priv\n");
|
|
return NULL;
|
|
}
|
|
|
|
priv->base = (struct ti_qspi_regs *)QSPI_BASE;
|
|
priv->mode = mode;
|
|
#if defined(CONFIG_DRA7XX)
|
|
priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
|
|
priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
|
|
priv->fclk = QSPI_DRA7XX_FCLK;
|
|
#else
|
|
priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
|
|
priv->fclk = QSPI_FCLK;
|
|
#endif
|
|
|
|
ti_spi_set_speed(priv, max_hz);
|
|
|
|
#ifdef CONFIG_TI_SPI_MMAP
|
|
ti_spi_setup_spi_register(priv);
|
|
#endif
|
|
|
|
return &priv->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
|
|
free(priv);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
|
|
|
|
debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
|
|
__ti_qspi_set_mode(priv, priv->mode);
|
|
return __ti_qspi_claim_bus(priv, priv->slave.cs);
|
|
}
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
|
|
|
|
debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
|
|
__ti_qspi_release_bus(priv);
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
|
|
void *din, unsigned long flags)
|
|
{
|
|
struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
|
|
|
|
debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
|
|
priv->slave.bus, priv->slave.cs, bitlen, flags);
|
|
return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
|
|
}
|
|
|
|
#else /* CONFIG_DM_SPI */
|
|
|
|
static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
|
|
struct spi_slave *slave,
|
|
bool enable)
|
|
{
|
|
u32 memval;
|
|
u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
|
|
|
|
if (!enable) {
|
|
writel(0, &priv->base->setup0);
|
|
return;
|
|
}
|
|
|
|
memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
|
|
|
|
switch (mode) {
|
|
case SPI_RX_QUAD:
|
|
memval |= QSPI_CMD_READ_QUAD;
|
|
memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
|
|
memval |= QSPI_SETUP0_READ_QUAD;
|
|
slave->mode |= SPI_RX_QUAD;
|
|
break;
|
|
case SPI_RX_DUAL:
|
|
memval |= QSPI_CMD_READ_DUAL;
|
|
memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
|
|
memval |= QSPI_SETUP0_READ_DUAL;
|
|
break;
|
|
default:
|
|
memval |= QSPI_CMD_READ;
|
|
memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
|
|
memval |= QSPI_SETUP0_READ_NORMAL;
|
|
break;
|
|
}
|
|
|
|
writel(memval, &priv->base->setup0);
|
|
}
|
|
|
|
|
|
static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
|
|
{
|
|
struct ti_qspi_priv *priv = dev_get_priv(bus);
|
|
|
|
ti_spi_set_speed(priv, max_hz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_qspi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
struct ti_qspi_priv *priv = dev_get_priv(bus);
|
|
return __ti_qspi_set_mode(priv, mode);
|
|
}
|
|
|
|
static int ti_qspi_claim_bus(struct udevice *dev)
|
|
{
|
|
struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
|
|
struct spi_slave *slave = dev_get_parent_priv(dev);
|
|
struct ti_qspi_priv *priv;
|
|
struct udevice *bus;
|
|
|
|
bus = dev->parent;
|
|
priv = dev_get_priv(bus);
|
|
|
|
if (slave_plat->cs > priv->num_cs) {
|
|
debug("invalid qspi chip select\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
__ti_qspi_setup_memorymap(priv, slave, true);
|
|
|
|
return __ti_qspi_claim_bus(priv, slave_plat->cs);
|
|
}
|
|
|
|
static int ti_qspi_release_bus(struct udevice *dev)
|
|
{
|
|
struct spi_slave *slave = dev_get_parent_priv(dev);
|
|
struct ti_qspi_priv *priv;
|
|
struct udevice *bus;
|
|
|
|
bus = dev->parent;
|
|
priv = dev_get_priv(bus);
|
|
|
|
__ti_qspi_setup_memorymap(priv, slave, false);
|
|
__ti_qspi_release_bus(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
|
|
struct ti_qspi_priv *priv;
|
|
struct udevice *bus;
|
|
|
|
bus = dev->parent;
|
|
priv = dev_get_priv(bus);
|
|
|
|
if (slave->cs > priv->num_cs) {
|
|
debug("invalid qspi chip select\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
|
|
}
|
|
|
|
static int ti_qspi_probe(struct udevice *bus)
|
|
{
|
|
struct ti_qspi_priv *priv = dev_get_priv(bus);
|
|
|
|
priv->fclk = dev_get_driver_data(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void *map_syscon_chipselects(struct udevice *bus)
|
|
{
|
|
#if CONFIG_IS_ENABLED(SYSCON)
|
|
struct udevice *syscon;
|
|
struct regmap *regmap;
|
|
const fdt32_t *cell;
|
|
int len, err;
|
|
|
|
err = uclass_get_device_by_phandle(UCLASS_SYSCON, bus,
|
|
"syscon-chipselects", &syscon);
|
|
if (err) {
|
|
debug("%s: unable to find syscon device (%d)\n", __func__,
|
|
err);
|
|
return NULL;
|
|
}
|
|
|
|
regmap = syscon_get_regmap(syscon);
|
|
if (IS_ERR(regmap)) {
|
|
debug("%s: unable to find regmap (%ld)\n", __func__,
|
|
PTR_ERR(regmap));
|
|
return NULL;
|
|
}
|
|
|
|
cell = fdt_getprop(gd->fdt_blob, dev_of_offset(bus),
|
|
"syscon-chipselects", &len);
|
|
if (len < 2*sizeof(fdt32_t)) {
|
|
debug("%s: offset not available\n", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
return fdtdec_get_number(cell + 1, 1) + regmap_get_range(regmap, 0);
|
|
#else
|
|
fdt_addr_t addr;
|
|
addr = devfdt_get_addr_index(bus, 2);
|
|
return (addr == FDT_ADDR_T_NONE) ? NULL :
|
|
map_physmem(addr, 0, MAP_NOCACHE);
|
|
#endif
|
|
}
|
|
|
|
static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct ti_qspi_priv *priv = dev_get_priv(bus);
|
|
const void *blob = gd->fdt_blob;
|
|
int node = dev_of_offset(bus);
|
|
|
|
priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
|
|
priv->base = map_physmem(devfdt_get_addr(bus),
|
|
sizeof(struct ti_qspi_regs), MAP_NOCACHE);
|
|
priv->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0,
|
|
MAP_NOCACHE);
|
|
|
|
priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
|
|
if (priv->max_hz < 0) {
|
|
debug("Error: Max frequency missing\n");
|
|
return -ENODEV;
|
|
}
|
|
priv->num_cs = fdtdec_get_int(blob, node, "num-cs", 4);
|
|
|
|
debug("%s: regs=<0x%x>, max-frequency=%d\n", __func__,
|
|
(int)priv->base, priv->max_hz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ti_qspi_child_pre_probe(struct udevice *dev)
|
|
{
|
|
struct spi_slave *slave = dev_get_parent_priv(dev);
|
|
struct udevice *bus = dev_get_parent(dev);
|
|
struct ti_qspi_priv *priv = dev_get_priv(bus);
|
|
|
|
slave->memory_map = priv->memory_map;
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_spi_ops ti_qspi_ops = {
|
|
.claim_bus = ti_qspi_claim_bus,
|
|
.release_bus = ti_qspi_release_bus,
|
|
.xfer = ti_qspi_xfer,
|
|
.set_speed = ti_qspi_set_speed,
|
|
.set_mode = ti_qspi_set_mode,
|
|
};
|
|
|
|
static const struct udevice_id ti_qspi_ids[] = {
|
|
{ .compatible = "ti,dra7xxx-qspi", .data = QSPI_DRA7XX_FCLK},
|
|
{ .compatible = "ti,am4372-qspi", .data = QSPI_FCLK},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(ti_qspi) = {
|
|
.name = "ti_qspi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = ti_qspi_ids,
|
|
.ops = &ti_qspi_ops,
|
|
.ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
|
|
.priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
|
|
.probe = ti_qspi_probe,
|
|
.child_pre_probe = ti_qspi_child_pre_probe,
|
|
};
|
|
#endif /* CONFIG_DM_SPI */
|