u-boot/net/eth-uclass.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

554 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2001-2015
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Joe Hershberger, National Instruments
*/
#include <common.h>
#include <dm.h>
#include <environment.h>
#include <net.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
#include "eth_internal.h"
DECLARE_GLOBAL_DATA_PTR;
/**
* struct eth_device_priv - private structure for each Ethernet device
*
* @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
*/
struct eth_device_priv {
enum eth_state_t state;
};
/**
* struct eth_uclass_priv - The structure attached to the uclass itself
*
* @current: The Ethernet device that the network functions are using
*/
struct eth_uclass_priv {
struct udevice *current;
};
/* eth_errno - This stores the most recent failure code from DM functions */
static int eth_errno;
static struct eth_uclass_priv *eth_get_uclass_priv(void)
{
struct uclass *uc;
uclass_get(UCLASS_ETH, &uc);
assert(uc);
return uc->priv;
}
void eth_set_current_to_next(void)
{
struct eth_uclass_priv *uc_priv;
uc_priv = eth_get_uclass_priv();
if (uc_priv->current)
uclass_next_device(&uc_priv->current);
if (!uc_priv->current)
uclass_first_device(UCLASS_ETH, &uc_priv->current);
}
/*
* Typically this will simply return the active device.
* In the case where the most recent active device was unset, this will attempt
* to return the first device. If that device doesn't exist or fails to probe,
* this function will return NULL.
*/
struct udevice *eth_get_dev(void)
{
struct eth_uclass_priv *uc_priv;
uc_priv = eth_get_uclass_priv();
if (!uc_priv->current)
eth_errno = uclass_first_device(UCLASS_ETH,
&uc_priv->current);
return uc_priv->current;
}
/*
* Typically this will just store a device pointer.
* In case it was not probed, we will attempt to do so.
* dev may be NULL to unset the active device.
*/
void eth_set_dev(struct udevice *dev)
{
if (dev && !device_active(dev)) {
eth_errno = device_probe(dev);
if (eth_errno)
dev = NULL;
}
eth_get_uclass_priv()->current = dev;
}
/*
* Find the udevice that either has the name passed in as devname or has an
* alias named devname.
*/
struct udevice *eth_get_dev_by_name(const char *devname)
{
int seq = -1;
char *endp = NULL;
const char *startp = NULL;
struct udevice *it;
struct uclass *uc;
int len = strlen("eth");
/* Must be longer than 3 to be an alias */
if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
startp = devname + len;
seq = simple_strtoul(startp, &endp, 10);
}
uclass_get(UCLASS_ETH, &uc);
uclass_foreach_dev(it, uc) {
/*
* We need the seq to be valid, so try to probe it.
* If the probe fails, the seq will not match since it will be
* -1 instead of what we are looking for.
* We don't care about errors from probe here. Either they won't
* match an alias or it will match a literal name and we'll pick
* up the error when we try to probe again in eth_set_dev().
*/
if (device_probe(it))
continue;
/* Check for the name or the sequence number to match */
if (strcmp(it->name, devname) == 0 ||
(endp > startp && it->seq == seq))
return it;
}
return NULL;
}
unsigned char *eth_get_ethaddr(void)
{
struct eth_pdata *pdata;
if (eth_get_dev()) {
pdata = eth_get_dev()->platdata;
return pdata->enetaddr;
}
return NULL;
}
/* Set active state without calling start on the driver */
int eth_init_state_only(void)
{
struct udevice *current;
struct eth_device_priv *priv;
current = eth_get_dev();
if (!current || !device_active(current))
return -EINVAL;
priv = current->uclass_priv;
priv->state = ETH_STATE_ACTIVE;
return 0;
}
/* Set passive state without calling stop on the driver */
void eth_halt_state_only(void)
{
struct udevice *current;
struct eth_device_priv *priv;
current = eth_get_dev();
if (!current || !device_active(current))
return;
priv = current->uclass_priv;
priv->state = ETH_STATE_PASSIVE;
}
int eth_get_dev_index(void)
{
if (eth_get_dev())
return eth_get_dev()->seq;
return -1;
}
static int eth_write_hwaddr(struct udevice *dev)
{
struct eth_pdata *pdata;
int ret = 0;
if (!dev || !device_active(dev))
return -EINVAL;
/* seq is valid since the device is active */
if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
pdata = dev->platdata;
if (!is_valid_ethaddr(pdata->enetaddr)) {
printf("\nError: %s address %pM illegal value\n",
dev->name, pdata->enetaddr);
return -EINVAL;
}
/*
* Drivers are allowed to decide not to implement this at
* run-time. E.g. Some devices may use it and some may not.
*/
ret = eth_get_ops(dev)->write_hwaddr(dev);
if (ret == -ENOSYS)
ret = 0;
if (ret)
printf("\nWarning: %s failed to set MAC address\n",
dev->name);
}
return ret;
}
static int on_ethaddr(const char *name, const char *value, enum env_op op,
int flags)
{
int index;
int retval;
struct udevice *dev;
/* look for an index after "eth" */
index = simple_strtoul(name + 3, NULL, 10);
retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
if (!retval) {
struct eth_pdata *pdata = dev->platdata;
switch (op) {
case env_op_create:
case env_op_overwrite:
eth_parse_enetaddr(value, pdata->enetaddr);
eth_write_hwaddr(dev);
break;
case env_op_delete:
memset(pdata->enetaddr, 0, ARP_HLEN);
}
}
return 0;
}
U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
int eth_init(void)
{
char *ethact = env_get("ethact");
char *ethrotate = env_get("ethrotate");
struct udevice *current = NULL;
struct udevice *old_current;
int ret = -ENODEV;
/*
* When 'ethrotate' variable is set to 'no' and 'ethact' variable
* is already set to an ethernet device, we should stick to 'ethact'.
*/
if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
if (ethact) {
current = eth_get_dev_by_name(ethact);
if (!current)
return -EINVAL;
}
}
if (!current) {
current = eth_get_dev();
if (!current) {
printf("No ethernet found.\n");
return -ENODEV;
}
}
old_current = current;
do {
if (current) {
debug("Trying %s\n", current->name);
if (device_active(current)) {
ret = eth_get_ops(current)->start(current);
if (ret >= 0) {
struct eth_device_priv *priv =
current->uclass_priv;
priv->state = ETH_STATE_ACTIVE;
return 0;
}
} else {
ret = eth_errno;
}
debug("FAIL\n");
} else {
debug("PROBE FAIL\n");
}
/*
* If ethrotate is enabled, this will change "current",
* otherwise we will drop out of this while loop immediately
*/
eth_try_another(0);
/* This will ensure the new "current" attempted to probe */
current = eth_get_dev();
} while (old_current != current);
return ret;
}
void eth_halt(void)
{
struct udevice *current;
struct eth_device_priv *priv;
current = eth_get_dev();
if (!current || !device_active(current))
return;
eth_get_ops(current)->stop(current);
priv = current->uclass_priv;
priv->state = ETH_STATE_PASSIVE;
}
int eth_is_active(struct udevice *dev)
{
struct eth_device_priv *priv;
if (!dev || !device_active(dev))
return 0;
priv = dev_get_uclass_priv(dev);
return priv->state == ETH_STATE_ACTIVE;
}
int eth_send(void *packet, int length)
{
struct udevice *current;
int ret;
current = eth_get_dev();
if (!current)
return -ENODEV;
if (!eth_is_active(current))
return -EINVAL;
ret = eth_get_ops(current)->send(current, packet, length);
if (ret < 0) {
/* We cannot completely return the error at present */
debug("%s: send() returned error %d\n", __func__, ret);
}
return ret;
}
int eth_rx(void)
{
struct udevice *current;
uchar *packet;
int flags;
int ret;
int i;
current = eth_get_dev();
if (!current)
return -ENODEV;
if (!eth_is_active(current))
return -EINVAL;
/* Process up to 32 packets at one time */
flags = ETH_RECV_CHECK_DEVICE;
for (i = 0; i < 32; i++) {
ret = eth_get_ops(current)->recv(current, flags, &packet);
flags = 0;
if (ret > 0)
net_process_received_packet(packet, ret);
if (ret >= 0 && eth_get_ops(current)->free_pkt)
eth_get_ops(current)->free_pkt(current, packet, ret);
if (ret <= 0)
break;
}
if (ret == -EAGAIN)
ret = 0;
if (ret < 0) {
/* We cannot completely return the error at present */
debug("%s: recv() returned error %d\n", __func__, ret);
}
return ret;
}
int eth_initialize(void)
{
int num_devices = 0;
struct udevice *dev;
eth_common_init();
/*
* Devices need to write the hwaddr even if not started so that Linux
* will have access to the hwaddr that u-boot stored for the device.
* This is accomplished by attempting to probe each device and calling
* their write_hwaddr() operation.
*/
uclass_first_device(UCLASS_ETH, &dev);
if (!dev) {
printf("No ethernet found.\n");
bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
} else {
char *ethprime = env_get("ethprime");
struct udevice *prime_dev = NULL;
if (ethprime)
prime_dev = eth_get_dev_by_name(ethprime);
if (prime_dev) {
eth_set_dev(prime_dev);
eth_current_changed();
} else {
eth_set_dev(NULL);
}
bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
do {
if (num_devices)
printf(", ");
printf("eth%d: %s", dev->seq, dev->name);
if (ethprime && dev == prime_dev)
printf(" [PRIME]");
eth_write_hwaddr(dev);
uclass_next_device(&dev);
num_devices++;
} while (dev);
putc('\n');
}
return num_devices;
}
static int eth_post_bind(struct udevice *dev)
{
if (strchr(dev->name, ' ')) {
printf("\nError: eth device name \"%s\" has a space!\n",
dev->name);
return -EINVAL;
}
return 0;
}
static int eth_pre_unbind(struct udevice *dev)
{
/* Don't hang onto a pointer that is going away */
if (dev == eth_get_uclass_priv()->current)
eth_set_dev(NULL);
return 0;
}
static int eth_post_probe(struct udevice *dev)
{
struct eth_device_priv *priv = dev->uclass_priv;
struct eth_pdata *pdata = dev->platdata;
unsigned char env_enetaddr[ARP_HLEN];
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
struct eth_ops *ops = eth_get_ops(dev);
static int reloc_done;
if (!reloc_done) {
if (ops->start)
ops->start += gd->reloc_off;
if (ops->send)
ops->send += gd->reloc_off;
if (ops->recv)
ops->recv += gd->reloc_off;
if (ops->free_pkt)
ops->free_pkt += gd->reloc_off;
if (ops->stop)
ops->stop += gd->reloc_off;
#ifdef CONFIG_MCAST_TFTP
if (ops->mcast)
ops->mcast += gd->reloc_off;
#endif
if (ops->write_hwaddr)
ops->write_hwaddr += gd->reloc_off;
if (ops->read_rom_hwaddr)
ops->read_rom_hwaddr += gd->reloc_off;
reloc_done++;
}
#endif
priv->state = ETH_STATE_INIT;
/* Check if the device has a MAC address in ROM */
if (eth_get_ops(dev)->read_rom_hwaddr)
eth_get_ops(dev)->read_rom_hwaddr(dev);
eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr);
if (!is_zero_ethaddr(env_enetaddr)) {
if (!is_zero_ethaddr(pdata->enetaddr) &&
memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
printf("\nWarning: %s MAC addresses don't match:\n",
dev->name);
printf("Address in ROM is %pM\n",
pdata->enetaddr);
printf("Address in environment is %pM\n",
env_enetaddr);
}
/* Override the ROM MAC address */
memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
} else if (is_valid_ethaddr(pdata->enetaddr)) {
eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
printf("\nWarning: %s using MAC address from ROM\n",
dev->name);
} else if (is_zero_ethaddr(pdata->enetaddr) ||
!is_valid_ethaddr(pdata->enetaddr)) {
#ifdef CONFIG_NET_RANDOM_ETHADDR
net_random_ethaddr(pdata->enetaddr);
printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
dev->name, dev->seq, pdata->enetaddr);
#else
printf("\nError: %s address not set.\n",
dev->name);
return -EINVAL;
#endif
}
return 0;
}
static int eth_pre_remove(struct udevice *dev)
{
struct eth_pdata *pdata = dev->platdata;
eth_get_ops(dev)->stop(dev);
/* clear the MAC address */
memset(pdata->enetaddr, 0, ARP_HLEN);
return 0;
}
UCLASS_DRIVER(eth) = {
.name = "eth",
.id = UCLASS_ETH,
.post_bind = eth_post_bind,
.pre_unbind = eth_pre_unbind,
.post_probe = eth_post_probe,
.pre_remove = eth_pre_remove,
.priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
.per_device_auto_alloc_size = sizeof(struct eth_device_priv),
.flags = DM_UC_FLAG_SEQ_ALIAS,
};