e97a78cfed
This patch adds support for VSC8514 PHY module which can be found on Freescale's T1040RDB boards. Signed-off-by: Arpit Goel <B44344@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
374 lines
10 KiB
C
374 lines
10 KiB
C
/*
|
|
* Vitesse PHY drivers
|
|
*
|
|
* Copyright 2010-2012 Freescale Semiconductor, Inc.
|
|
* Author: Andy Fleming
|
|
* Add vsc8662 phy support - Priyanka Jain
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <miiphy.h>
|
|
|
|
/* Cicada Auxiliary Control/Status Register */
|
|
#define MIIM_CIS82xx_AUX_CONSTAT 0x1c
|
|
#define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004
|
|
#define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020
|
|
#define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018
|
|
#define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010
|
|
#define MIIM_CIS82xx_AUXCONSTAT_100 0x0008
|
|
|
|
/* Cicada Extended Control Register 1 */
|
|
#define MIIM_CIS82xx_EXT_CON1 0x17
|
|
#define MIIM_CIS8201_EXTCON1_INIT 0x0000
|
|
|
|
/* Cicada 8204 Extended PHY Control Register 1 */
|
|
#define MIIM_CIS8204_EPHY_CON 0x17
|
|
#define MIIM_CIS8204_EPHYCON_INIT 0x0006
|
|
#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
|
|
|
|
/* Cicada 8204 Serial LED Control Register */
|
|
#define MIIM_CIS8204_SLED_CON 0x1b
|
|
#define MIIM_CIS8204_SLEDCON_INIT 0x1115
|
|
|
|
/* Vitesse VSC8601 Extended PHY Control Register 1 */
|
|
#define MIIM_VSC8601_EPHY_CON 0x17
|
|
#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
|
|
#define MIIM_VSC8601_SKEW_CTRL 0x1c
|
|
|
|
#define PHY_EXT_PAGE_ACCESS 0x1f
|
|
#define PHY_EXT_PAGE_ACCESS_GENERAL 0x10
|
|
#define PHY_EXT_PAGE_ACCESS_EXTENDED3 0x3
|
|
|
|
/* Vitesse VSC8574 control register */
|
|
#define MIIM_VSC8574_MAC_SERDES_CON 0x10
|
|
#define MIIM_VSC8574_MAC_SERDES_ANEG 0x80
|
|
#define MIIM_VSC8574_GENERAL18 0x12
|
|
#define MIIM_VSC8574_GENERAL19 0x13
|
|
|
|
/* Vitesse VSC8574 gerenal purpose register 18 */
|
|
#define MIIM_VSC8574_18G_SGMII 0x80f0
|
|
#define MIIM_VSC8574_18G_QSGMII 0x80e0
|
|
#define MIIM_VSC8574_18G_CMDSTAT 0x8000
|
|
|
|
/* Vitesse VSC8514 control register */
|
|
#define MIIM_VSC8514_GENERAL18 0x12
|
|
#define MIIM_VSC8514_GENERAL19 0x13
|
|
#define MIIM_VSC8514_GENERAL23 0x17
|
|
|
|
/* Vitesse VSC8514 gerenal purpose register 18 */
|
|
#define MIIM_VSC8514_18G_QSGMII 0x80e0
|
|
#define MIIM_VSC8514_18G_CMDSTAT 0x8000
|
|
|
|
/* CIS8201 */
|
|
static int vitesse_config(struct phy_device *phydev)
|
|
{
|
|
/* Override PHY config settings */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
|
|
MIIM_CIS82xx_AUXCONSTAT_INIT);
|
|
/* Set up the interface mode */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
|
|
MIIM_CIS8201_EXTCON1_INIT);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vitesse_parse_status(struct phy_device *phydev)
|
|
{
|
|
int speed;
|
|
int mii_reg;
|
|
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
|
|
|
|
if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
|
|
switch (speed) {
|
|
case MIIM_CIS82xx_AUXCONSTAT_GBIT:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case MIIM_CIS82xx_AUXCONSTAT_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
default:
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vitesse_startup(struct phy_device *phydev)
|
|
{
|
|
genphy_update_link(phydev);
|
|
vitesse_parse_status(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cis8204_config(struct phy_device *phydev)
|
|
{
|
|
/* Override PHY config settings */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
|
|
MIIM_CIS82xx_AUXCONSTAT_INIT);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
|
|
(phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
|
|
(phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
|
|
(phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
|
|
MIIM_CIS8204_EPHYCON_INIT |
|
|
MIIM_CIS8204_EPHYCON_RGMII);
|
|
else
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
|
|
MIIM_CIS8204_EPHYCON_INIT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Vitesse VSC8601 */
|
|
static int vsc8601_config(struct phy_device *phydev)
|
|
{
|
|
/* Configure some basic stuff */
|
|
#ifdef CONFIG_SYS_VSC8601_SKEWFIX
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON,
|
|
MIIM_VSC8601_EPHY_CON_INIT_SKEW);
|
|
#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1);
|
|
#define VSC8101_SKEW \
|
|
((CONFIG_SYS_VSC8601_SKEW_TX << 14) \
|
|
| (CONFIG_SYS_VSC8601_SKEW_RX << 12))
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL,
|
|
VSC8101_SKEW);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
#endif
|
|
#endif
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc8574_config(struct phy_device *phydev)
|
|
{
|
|
u32 val;
|
|
/* configure register 19G for MAC */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_GENERAL);
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
|
|
/* set bit 15:14 to '01' for QSGMII mode */
|
|
val = (val & 0x3fff) | (1 << 14);
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_VSC8574_GENERAL19, val);
|
|
/* Enable 4 ports MAC QSGMII */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
|
|
MIIM_VSC8574_18G_QSGMII);
|
|
} else {
|
|
/* set bit 15:14 to '00' for SGMII mode */
|
|
val = val & 0x3fff;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val);
|
|
/* Enable 4 ports MAC SGMII */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
|
|
MIIM_VSC8574_18G_SGMII);
|
|
}
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
|
|
/* When bit 15 is cleared the command has completed */
|
|
while (val & MIIM_VSC8574_18G_CMDSTAT)
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
|
|
|
|
/* Enable Serdes Auto-negotiation */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_EXTENDED3);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON);
|
|
val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc8514_config(struct phy_device *phydev)
|
|
{
|
|
u32 val;
|
|
int timeout = 1000000;
|
|
|
|
/* configure register to access 19G */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_GENERAL);
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
|
|
/* set bit 15:14 to '01' for QSGMII mode */
|
|
val = (val & 0x3fff) | (1 << 14);
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_VSC8514_GENERAL19, val);
|
|
/* Enable 4 ports MAC QSGMII */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
|
|
MIIM_VSC8514_18G_QSGMII);
|
|
} else {
|
|
/*TODO Add SGMII functionality once spec sheet
|
|
* for VSC8514 defines complete functionality
|
|
*/
|
|
}
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
|
|
/* When bit 15 is cleared the command has completed */
|
|
while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
|
|
|
|
if (0 == timeout) {
|
|
printf("PHY 8514 config failed\n");
|
|
return -1;
|
|
}
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
|
|
/* configure register to access 23 */
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
|
|
/* set bits 10:8 to '000' */
|
|
val = (val & 0xf8ff);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver VSC8211_driver = {
|
|
.name = "Vitesse VSC8211",
|
|
.uid = 0xfc4b0,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vitesse_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8221_driver = {
|
|
.name = "Vitesse VSC8221",
|
|
.uid = 0xfc550,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8244_driver = {
|
|
.name = "Vitesse VSC8244",
|
|
.uid = 0xfc6c0,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8234_driver = {
|
|
.name = "Vitesse VSC8234",
|
|
.uid = 0xfc620,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8574_driver = {
|
|
.name = "Vitesse VSC8574",
|
|
.uid = 0x704a0,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8574_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8514_driver = {
|
|
.name = "Vitesse VSC8514",
|
|
.uid = 0x70570,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8514_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8601_driver = {
|
|
.name = "Vitesse VSC8601",
|
|
.uid = 0x70420,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8601_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8641_driver = {
|
|
.name = "Vitesse VSC8641",
|
|
.uid = 0x70430,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8662_driver = {
|
|
.name = "Vitesse VSC8662",
|
|
.uid = 0x70660,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
/* Vitesse bought Cicada, so we'll put these here */
|
|
static struct phy_driver cis8201_driver = {
|
|
.name = "CIS8201",
|
|
.uid = 0xfc410,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vitesse_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver cis8204_driver = {
|
|
.name = "Cicada Cis8204",
|
|
.uid = 0xfc440,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &cis8204_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
int phy_vitesse_init(void)
|
|
{
|
|
phy_register(&VSC8641_driver);
|
|
phy_register(&VSC8601_driver);
|
|
phy_register(&VSC8234_driver);
|
|
phy_register(&VSC8244_driver);
|
|
phy_register(&VSC8211_driver);
|
|
phy_register(&VSC8221_driver);
|
|
phy_register(&VSC8574_driver);
|
|
phy_register(&VSC8514_driver);
|
|
phy_register(&VSC8662_driver);
|
|
phy_register(&cis8201_driver);
|
|
phy_register(&cis8204_driver);
|
|
|
|
return 0;
|
|
}
|