274 lines
9.6 KiB
Plaintext
274 lines
9.6 KiB
Plaintext
Freescale MCF5475EVB ColdFire Development Board
|
|
================================================
|
|
|
|
TsiChung Liew(Tsi-Chung.Liew@freescale.com)
|
|
Created Jan 08, 2008
|
|
===========================================
|
|
|
|
|
|
Changed files:
|
|
==============
|
|
|
|
- board/freescale/m547xevb/m547xevb.c Dram setup, IDE pre init, and PCI init
|
|
- board/freescale/m547xevb/mii.c MII init
|
|
- board/freescale/m547xevb/Makefile Makefile
|
|
- board/freescale/m547xevb/config.mk config make
|
|
- board/freescale/m547xevb/u-boot.lds Linker description
|
|
|
|
- arch/m68k/cpu/mcf547x_8x/cpu.c cpu specific code
|
|
- arch/m68k/cpu/mcf547x_8x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
|
|
- arch/m68k/cpu/mcf547x_8x/interrupts.c cpu specific interrupt support
|
|
- arch/m68k/cpu/mcf547x_8x/slicetimer.c Timer support
|
|
- arch/m68k/cpu/mcf547x_8x/speed.c system, pci, flexbus, and cpu clock
|
|
- arch/m68k/cpu/mcf547x_8x/Makefile Makefile
|
|
- arch/m68k/cpu/mcf547x_8x/config.mk config make
|
|
- arch/m68k/cpu/mcf547x_8x/start.S start up assembly code
|
|
|
|
- doc/README.m5475evb This readme file
|
|
|
|
- drivers/dma/MCD_dmaApi.c DMA API functions
|
|
- drivers/dma/MCD_tasks.c DMA Tasks
|
|
- drivers/dma/MCD_tasksInit.c DMA Tasks Init
|
|
- drivers/net/fsl_mcdmafec.c ColdFire common DMA FEC driver
|
|
- drivers/serial/mcfuart.c ColdFire common UART driver
|
|
|
|
- include/MCD_dma.h DMA header file
|
|
- include/MCD_progCheck.h DMA header file
|
|
- include/MCD_tasksInit.h DMA header file
|
|
- include/asm-m68k/bitops.h Bit operation function export
|
|
- include/asm-m68k/byteorder.h Byte order functions
|
|
- include/asm-m68k/errno.h Error Number definition
|
|
- include/asm-m68k/fec.h FEC structure and definition
|
|
- include/asm-m68k/fsl_i2c.h I2C structure and definition
|
|
- include/asm-m68k/fsl_mcddmafec.h DMA FEC structure and definition
|
|
- include/asm-m68k/global_data.h Global data structure
|
|
- include/asm-m68k/immap.h ColdFire specific header file and driver macros
|
|
- include/asm-m68k/immap_547x_8x.h mcf547x_8x specific header file
|
|
- include/asm-m68k/io.h io functions
|
|
- include/asm-m68k/m547x_8x.h mcf547x_8x specific header file
|
|
- include/asm-m68k/posix_types.h Posix
|
|
- include/asm-m68k/processor.h header file
|
|
- include/asm-m68k/ptrace.h Exception structure
|
|
- include/asm-m68k/rtc.h Realtime clock header file
|
|
- include/asm-m68k/string.h String function export
|
|
- include/asm-m68k/timer.h Timer structure and definition
|
|
- include/asm-m68k/types.h Data types definition
|
|
- include/asm-m68k/uart.h Uart structure and definition
|
|
- include/asm-m68k/u-boot.h u-boot structure
|
|
|
|
- include/configs/M5475EVB.h Board specific configuration file
|
|
|
|
- arch/m68k/lib/board.c board init function
|
|
- arch/m68k/lib/cache.c
|
|
- arch/m68k/lib/interrupts Coldfire common interrupt functions
|
|
- arch/m68k/lib/m68k_linux.c
|
|
- arch/m68k/lib/traps.c Exception init code
|
|
|
|
1 MCF547x specific Options/Settings
|
|
====================================
|
|
1.1 pre-loader is no longer suppoer in thie coldfire family
|
|
|
|
1.2 Configuration settings for M5475EVB Development Board
|
|
CONFIG_MCF547x_8x -- define for all MCF547x_8x CPUs
|
|
CONFIG_M547x -- define for all Freescale MCF547x CPUs
|
|
CONFIG_M5475 -- define for M5475EVB board
|
|
|
|
CONFIG_MCFUART -- define to use common CF Uart driver
|
|
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
|
|
CONFIG_BAUDRATE -- define UART baudrate
|
|
|
|
CONFIG_FSLDMAFEC -- define to use common dma FEC driver
|
|
CONFIG_NET_MULTI -- define to use multi FEC in u-boot
|
|
CONFIG_MII -- enable to use MII driver
|
|
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
|
|
CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
|
|
CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
|
|
CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
|
|
CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
|
|
CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration
|
|
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
|
|
CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register
|
|
MCFFEC_TOUT_LOOP -- set FEC timeout loop
|
|
CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot
|
|
|
|
CONFIG_CMD_USB -- enable USB commands
|
|
CONFIG_USB_OHCI_NEW -- enable USB OHCI driver
|
|
CONFIG_USB_STORAGE -- enable USB Storage device
|
|
CONFIG_DOS_PARTITION -- enable DOS read/write
|
|
|
|
CONFIG_SLTTMR -- define to use SLT timer
|
|
|
|
CONFIG_FSL_I2C -- define to use FSL common I2C driver
|
|
CONFIG_HARD_I2C -- define for I2C hardware support
|
|
CONFIG_SOFT_I2C -- define for I2C bit-banged
|
|
CONFIG_SYS_I2C_SPEED -- define for I2C speed
|
|
CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
|
|
CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
|
|
CONFIG_SYS_IMMR -- define for MBAR offset
|
|
|
|
CONFIG_PCI -- define for PCI support
|
|
CONFIG_PCI_PNP -- define for Plug n play support
|
|
CONFIG_SKIPPCI_HOSTBRIDGE -- SKIP PCI Host bridge
|
|
CONFIG_SYS_PCI_MEM_BUS -- PCI memory logical offset
|
|
CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset
|
|
CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size
|
|
CONFIG_SYS_PCI_IO_BUS -- PCI IO logical offset
|
|
CONFIG_SYS_PCI_IO_PHYS -- PCI IO physical offset
|
|
CONFIG_SYS_PCI_IO_SIZE -- PCI IO size
|
|
CONFIG_SYS_PCI_CFG_BUS -- PCI Configuration logical offset
|
|
CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset
|
|
CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size
|
|
|
|
CONFIG_SYS_MBAR -- define MBAR offset
|
|
|
|
CONFIG_MONITOR_IS_IN_RAM -- Not support
|
|
|
|
CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF547x internal SRAM
|
|
|
|
CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
|
|
CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
|
|
CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
|
|
|
|
CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
|
|
|
|
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
|
|
===========================================
|
|
2.1. System memory map:
|
|
Flash: 0xFF800000-0xFFFFFFFF (8MB)
|
|
DDR: 0x00000000-0x3FFFFFFF (1024MB)
|
|
SRAM: 0xF2000000-0xF2000FFF (4KB)
|
|
PCI: 0x70000000-0x8FFFFFFF (512MB)
|
|
IP: 0xF0000000-0xFFFFFFFF (256MB)
|
|
|
|
3. COMPILATION
|
|
==============
|
|
3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF or uclinux
|
|
version) from codesourcery.com was used. Download it from:
|
|
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
|
|
|
|
3.2 Compilation
|
|
export CROSS_COMPILE=cross-compile-prefix
|
|
cd u-boot-1.x.x
|
|
make distclean
|
|
make M5475AFE_config, or - boot 2MB, RAM 64MB
|
|
make M5475BFE_config, or - boot 2MB, code 16MB, RAM 64MB
|
|
make M5475CFE_config, or - boot 2MB, code 16MB, Video, USB, RAM 64MB
|
|
make M5475DFE_config, or - boot 2MB, USB, RAM 64MB
|
|
make M5475EFE_config, or - boot 2MB, Video, USB, RAM 64MB
|
|
make M5475FFE_config, or - boot 2MB, code 32MB, Video, USB, RAM 128MB
|
|
make M5475GFE_config, or - boot 2MB, RAM 64MB
|
|
make
|
|
|
|
5. SCREEN DUMP
|
|
==============
|
|
5.1
|
|
|
|
U-Boot 1.3.1 (Jan 8 2008 - 12:47:44)
|
|
|
|
CPU: Freescale MCF5475
|
|
CPU CLK 266 Mhz BUS CLK 133 Mhz
|
|
Board: Freescale FireEngine 5475 EVB
|
|
I2C: ready
|
|
DRAM: 64 MB
|
|
FLASH: 18 MB
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
Net: FEC0, FEC1
|
|
-> pri
|
|
bootdelay=1
|
|
baudrate=115200
|
|
ethaddr=00:e0:0c:bc:e5:60
|
|
eth1addr=00:e0:0c:bc:e5:61
|
|
ipaddr=192.162.1.2
|
|
serverip=192.162.1.1
|
|
gatewayip=192.162.1.1
|
|
netmask=255.255.255.0
|
|
hostname=M547xEVB
|
|
netdev=eth0
|
|
loadaddr=10000
|
|
u-boot=u-boot.bin
|
|
load=tftp ${loadaddr) ${u-boot}
|
|
upd=run load; run prog
|
|
prog=prot off bank 1;era ff800000 ff82ffff;cp.b ${loadaddr} ff800000 ${filesize};save
|
|
stdin=serial
|
|
stdout=serial
|
|
stderr=serial
|
|
ethact=FEC0
|
|
mem=65024k
|
|
|
|
Environment size: 433/8188 bytes
|
|
-> bdin
|
|
memstart = 0x00000000
|
|
memsize = 0x04000000
|
|
flashstart = 0xFF800000
|
|
flashsize = 0x01200000
|
|
flashoffset = 0x00000000
|
|
sramstart = 0xF2000000
|
|
sramsize = 0x00001000
|
|
mbar = 0xF0000000
|
|
busfreq = 133.333 MHz
|
|
pcifreq = 0 MHz
|
|
ethaddr = 00:E0:0C:BC:E5:60
|
|
eth1addr = 00:E0:0C:BC:E5:61
|
|
ip_addr = 192.162.1.2
|
|
baudrate = 115200 bps
|
|
-> ?
|
|
? - alias for 'help'
|
|
base - print or set address offset
|
|
bdinfo - print Board Info structure
|
|
boot - boot default, i.e., run 'bootcmd'
|
|
bootd - boot default, i.e., run 'bootcmd'
|
|
bootelf - Boot from an ELF image in memory
|
|
bootm - boot application image from memory
|
|
bootp - boot image via network using BootP/TFTP protocol
|
|
bootvx - Boot vxWorks from an ELF image
|
|
cmp - memory compare
|
|
coninfo - print console devices and information
|
|
cp - memory copy
|
|
crc32 - checksum calculation
|
|
dcache - enable or disable data cache
|
|
echo - echo args to console
|
|
erase - erase FLASH memory
|
|
flinfo - print FLASH memory information
|
|
go - start application at address 'addr'
|
|
help - print online help
|
|
i2c - I2C sub-system
|
|
icache - enable or disable instruction cache
|
|
iminfo - print header information for application image
|
|
imls - list all images found in flash
|
|
itest - return true/false on integer compare
|
|
loadb - load binary file over serial line (kermit mode)
|
|
loads - load S-Record file over serial line
|
|
loady - load binary file over serial line (ymodem mode)
|
|
loop - infinite loop on address range
|
|
md - memory display
|
|
mii - MII utility commands
|
|
mm - memory modify (auto-incrementing)
|
|
mtest - simple RAM test
|
|
mw - memory write (fill)
|
|
nfs - boot image via network using NFS protocol
|
|
nm - memory modify (constant address)
|
|
pci - list and access PCI Configuration Space
|
|
ping - send ICMP ECHO_REQUEST to network host
|
|
printenv- print environment variables
|
|
protect - enable or disable FLASH write protection
|
|
rarpboot- boot image via network using RARP/TFTP protocol
|
|
reset - Perform RESET of the CPU
|
|
run - run commands in an environment variable
|
|
saveenv - save environment variables to persistent storage
|
|
setenv - set environment variables
|
|
sleep - delay execution for some time
|
|
source - run script from memory
|
|
tftpboot- boot image via network using TFTP protocol
|
|
usb - USB sub-system
|
|
usbboot - boot from USB device
|
|
version - print monitor version
|
|
-> usb start
|
|
(Re)start USB...
|
|
USB: OHCI pci controller (1131, 1561) found @(0:17:0)
|
|
OHCI regs address 0x80000000
|
|
scanning bus for devices... 2 USB Device(s) found
|
|
scanning bus for storage devices... 1 Storage Device(s) found
|
|
->
|