ca3369df71
CONFIG_SPL_RAW_IMAGE_SUPPORT default y has been used to replace CONFIG_SPL_ABORT_ON_RAW_IMAGE for quite some time, so drop CONFIG_SPL_ABORT_ON_RAW_IMAGE. Signed-off-by: Peng Fan <peng.fan@nxp.com>
99 lines
3.0 KiB
C
99 lines
3.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2020 Compass Electronics Group, LLC
|
|
*/
|
|
|
|
#ifndef __IMX8MN_BEACON_H
|
|
#define __IMX8MN_BEACON_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN SZ_512K
|
|
#define CONFIG_SYS_UBOOT_BASE \
|
|
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
|
|
#define CONFIG_MALLOC_F_ADDR 0x184000
|
|
|
|
/* For RAW image gives a error info not panic */
|
|
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"image=Image\0" \
|
|
"ramdiskimage=rootfs.cpio.uboot\0" \
|
|
"console=ttymxc1,115200\0" \
|
|
"fdt_addr=0x43000000\0" \
|
|
"ramdisk_addr=0x44000000\0" \
|
|
"boot_fdt=try\0" \
|
|
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"initrd_addr=0x43800000\0" \
|
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
|
"mmcpart=1\0" \
|
|
"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
|
|
"mmcautodetect=yes\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
" root=PARTUUID=${uuid} rootwait rw ${mtdparts} ${optargs}\0" \
|
|
"ramargs=setenv bootargs console=${console} root=/dev/ram rw " \
|
|
" ${optargs}\0" \
|
|
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"loadramdisk=load mmc ${mmcdev} ${ramdisk_addr} ${ramdiskimage}\0"\
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run finduuid; run mmcargs; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"else " \
|
|
"echo wait for boot; " \
|
|
"fi;\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run netargs; " \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"${get_cmd} ${loadaddr} ${image}; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
|
|
"booti ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"else " \
|
|
"booti; " \
|
|
"fi;\0" \
|
|
"ramboot=echo Booting from RAMdisk...; "\
|
|
"run loadimage; run loadfdt; fdt addr $fdt_addr; "\
|
|
"run loadramdisk; run ramargs; " \
|
|
"booti ${loadaddr} ${ramdisk_addr} ${fdt_addr} ${optargs}\0"
|
|
|
|
/* Link Definitions */
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
#define PHYS_SDRAM 0x40000000
|
|
#if CONFIG_IS_ENABLED(IMX8MN_BEACON_2GB_LPDDR)
|
|
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
|
|
#else
|
|
#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */
|
|
#endif
|
|
|
|
#endif
|