39539887ea
* Patch by Curt Brune, 17 May 2004: - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC) - Add support for ESPD-Inc. EVB4510 Board
303 lines
12 KiB
C
303 lines
12 KiB
C
#ifndef __S3C4510B_ETH_H
|
|
#define __S3C4510B_ETH_H
|
|
/*
|
|
* Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
|
|
* Curt Brune <curt@cucy.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
* MODULE: $Id:$
|
|
* Description: Ethernet interface
|
|
* Runtime Env: ARM7TDMI
|
|
* Change History:
|
|
* 03-02-04 Create (Curt Brune) curt@cucy.com
|
|
*
|
|
*/
|
|
|
|
#define __packed __attribute__ ((packed))
|
|
|
|
#define ETH_MAC_ADDR_SIZE (6) /* dst,src addr is 6bytes each */
|
|
#define ETH_MaxTxFrames (16) /* Max number of Tx Frames */
|
|
|
|
/* Buffered DMA Receiver Control Register */
|
|
#define ETH_BRxBRST 0x0000F /* BDMA Rx Burst Size * BRxBRST */
|
|
/* = Burst Data Size 16 */
|
|
#define ETH_BRxSTSKO 0x00020 /* BDMA Rx Stop/Skip Frame or Interrupt(=1) */
|
|
/* case of not OWNER the current Frame */
|
|
#define ETH_BRxMAINC 0x00040 /* BDMA Rx Memory Address Inc/Dec */
|
|
#define ETH_BRxDIE 0x00080 /* BDMA Rx Every Received Frame Interrupt Enable */
|
|
#define ETH_BRxNLIE 0x00100 /* BDMA Rx NULL List Interrupt Enable */
|
|
#define ETH_BRxNOIE 0x00200 /* BDMA Rx Not Owner Interrupt Enable */
|
|
#define ETH_BRxMSOIE 0x00400 /* BDMA Rx Maximum Size over Interrupr Enable */
|
|
#define ETH_BRxLittle 0x00800 /* BDMA Rx Big/Little Endian */
|
|
#define ETH_BRxBig 0x00000 /* BDMA Rx Big/Little Endian */
|
|
#define ETH_BRxWA01 0x01000 /* BDMA Rx Word Alignment- one invalid byte */
|
|
#define ETH_BRxWA10 0x02000 /* BDMA Rx Word Alignment- two invalid byte */
|
|
#define ETH_BRxWA11 0x03000 /* BDMA Rx Word Alignment- three invalid byte */
|
|
#define ETH_BRxEn 0x04000 /* BDMA Rx Enable */
|
|
#define ETH_BRxRS 0x08000 /* BDMA Rx Reset */
|
|
#define ETH_RxEmpty 0x10000 /* BDMA Rx Buffer empty interrupt */
|
|
#define ETH_BRxEarly 0x20000 /* BDMA Rx Early notify Interrupt */
|
|
|
|
/* Buffered DMA Trasmit Control Register(BDMATXCON) */
|
|
#define ETH_BTxBRST 0x0000F /* BDMA Tx Burst Size = 16 */
|
|
#define ETH_BTxSTSKO 0x00020 /* BDMA Tx Stop/Skip Frame or Interrupt in case */
|
|
/* of not Owner the current frame */
|
|
#define ETH_BTxCPIE 0x00080 /* BDMA Tx Complete to send control */
|
|
/* packet Enable */
|
|
#define ETH_BTxNOIE 0x00200 /* BDMA Tx Buffer Not Owner */
|
|
#define ETH_BTxEmpty 0x00400 /* BDMA Tx Buffer Empty Interrupt */
|
|
|
|
/* BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in. */
|
|
#define ETH_BTxMSL000 0x00000 /* No wait to fill the BDMA */
|
|
#define ETH_BTxMSL001 0x00800 /* wait to fill 1/8 of the BDMA */
|
|
#define ETH_BTxMSL010 0x01000 /* wait to fill 2/8 of the BDMA */
|
|
#define ETH_BTxMSL011 0x01800 /* wait to fill 3/8 of the BDMA */
|
|
#define ETH_BTxMSL100 0x02000 /* wait to fill 4/8 of the BDMA */
|
|
#define ETH_BTxMSL101 0x02800 /* wait to fill 5/8 of the BDMA */
|
|
#define ETH_BTxMSL110 0x03000 /* wait to fill 6/8 of the BDMA */
|
|
#define ETH_BTxMSL111 0x03800 /* wait to fill 7/8 of the BDMA */
|
|
#define ETH_BTxEn 0x04000 /* BDMA Tx Enable */
|
|
#define ETH_BTxRS 0x08000 /* BDMA Tx Reset */
|
|
|
|
/* BDMA Status Register */
|
|
#define ETH_S_BRxRDF 0x00001 /* BDMA Rx Done Every Received Frame */
|
|
#define ETH_S_BRxNL 0x00002 /* BDMA Rx NULL List */
|
|
#define ETH_S_BRxNO 0x00004 /* BDMA Rx Not Owner */
|
|
#define ETH_S_BRxMSO 0x00008 /* BDMA Rx Maximum Size Over */
|
|
#define ETH_S_BRxEmpty 0x00010 /* BDMA Rx Buffer Empty */
|
|
#define ETH_S_BRxSEarly 0x00020 /* Early Notify */
|
|
#define ETH_S_BRxFRF 0x00080 /* One more frame data in BDMA receive buffer */
|
|
#define ETH_S_BTxCCP 0x10000 /* BDMA Tx Complete to send Control Packet */
|
|
#define ETH_S_BTxNL 0x20000 /* BDMA Tx Null List */
|
|
#define ETH_S_BTxNO 0x40000 /* BDMA Tx Not Owner */
|
|
#define ETH_S_BTxEmpty 0x100000 /* BDMA Tx Buffer Empty */
|
|
|
|
/* MAC Control Register */
|
|
#define ETH_HaltReg 0x0001 /* stop transmission and reception */
|
|
/* after completion of any current packets */
|
|
#define ETH_HaltImm 0x0002 /* Stop transmission and reception immediately */
|
|
#define ETH_SwReset 0x0004 /* reset all Ethernet controller state machines */
|
|
/* and FIFOs */
|
|
#define ETH_FullDup 0x0008 /* allow transmission to begin while reception */
|
|
/* is occurring */
|
|
#define ETH_MACLoop 0x0010 /* MAC loopback */
|
|
#define ETH_ConnM00 0x0000 /* Automatic-default */
|
|
#define ETH_ConnM01 0x0020 /* Force 10Mbits endec */
|
|
#define ETH_ConnM10 0x0040 /* Force MII (rate determined by MII clock */
|
|
#define ETH_MIIOFF 0x0040 /* Force MII (rate determined by MII clock */
|
|
#define ETH_Loop10 0x0080 /* Loop 10Mbps */
|
|
#define ETH_MissRoll 0x0400 /* Missed error counter rolled over */
|
|
#define ETH_MDCOFF 0x1000 /* MII Station Management Clock Off */
|
|
#define ETH_EnMissRoll 0x2000 /* Interrupt when missed error counter rolls */
|
|
/* over */
|
|
#define ETH_Link10 0x8000 /* Link status 10Mbps */
|
|
|
|
/* CAM control register(CAMCON) */
|
|
#define ETH_StationAcc 0x0001 /* Accept any packet with a unicast station */
|
|
/* address */
|
|
#define ETH_GroupAcc 0x0002 /* Accept any packet with multicast-group */
|
|
/* station address */
|
|
#define ETH_BroadAcc 0x0004 /* Accept any packet with a broadcast station */
|
|
/* address */
|
|
#define ETH_NegCAM 0x0008 /* 0: Accept packets CAM recognizes, */
|
|
/* reject others */
|
|
/* 1: reject packets CAM recognizes, */
|
|
/* accept others */
|
|
#define ETH_CompEn 0x0010 /* Compare Enable mode */
|
|
|
|
/* Transmit Control Register(MACTXCON) */
|
|
#define ETH_TxEn 0x0001 /* transmit Enable */
|
|
#define ETH_TxHalt 0x0002 /* Transmit Halt Request */
|
|
#define ETH_NoPad 0x0004 /* suppress Padding */
|
|
#define ETH_NoCRC 0x0008 /* Suppress CRC */
|
|
#define ETH_FBack 0x0010 /* Fast Back-off */
|
|
#define ETH_NoDef 0x0020 /* Disable the defer counter */
|
|
#define ETH_SdPause 0x0040 /* Send Pause */
|
|
#define ETH_MII10En 0x0080 /* MII 10Mbps mode enable */
|
|
#define ETH_EnUnder 0x0100 /* Enable Underrun */
|
|
#define ETH_EnDefer 0x0200 /* Enable Deferral */
|
|
#define ETH_EnNCarr 0x0400 /* Enable No Carrier */
|
|
#define ETH_EnExColl 0x0800 /* interrupt if 16 collision occur */
|
|
/* in the same packet */
|
|
#define ETH_EnLateColl 0x1000 /* interrupt if collision occurs after */
|
|
/* 512 bit times(64 bytes times) */
|
|
#define ETH_EnTxPar 0x2000 /* interrupt if the MAC transmit FIFO */
|
|
/* has a parity error */
|
|
#define ETH_EnComp 0x4000 /* interrupt when the MAC transmits or */
|
|
/* discards one packet */
|
|
|
|
/* Transmit Status Register(MACTXSTAT) */
|
|
#define ETH_ExColl 0x0010 /* Excessive collision */
|
|
#define ETH_TxDeffered 0x0020 /* set if 16 collisions occur for same packet */
|
|
#define ETH_Paused 0x0040 /* packet waited because of pause during */
|
|
/* transmission */
|
|
#define ETH_IntTx 0x0080 /* set if transmission of packet causes an */
|
|
/* interrupt condiftion */
|
|
#define ETH_Under 0x0100 /* MAC transmit FIFO becomes empty during */
|
|
/* transmission */
|
|
#define ETH_Defer 0x0200 /* MAC defers for MAC deferral */
|
|
#define ETH_NCarr 0x0400 /* No carrier sense detected during the */
|
|
/* transmission of a packet */
|
|
#define ETH_SQE 0x0800 /* Signal Quality Error */
|
|
#define ETH_LateColl 0x1000 /* a collision occures after 512 bit times */
|
|
#define ETH_TxPar 0x2000 /* MAC transmit FIFO has detected a parity error */
|
|
#define ETH_Comp 0x4000 /* MAC transmit or discards one packet */
|
|
#define ETH_TxHalted 0x8000 /* Transmission was halted by clearing */
|
|
/* TxEn or Halt immedite */
|
|
|
|
/* Receive Control Register (MACRXCON) */
|
|
#define ETH_RxEn 0x0001
|
|
#define ETH_RxHalt 0x0002
|
|
#define ETH_LongEn 0x0004
|
|
#define ETH_ShortEn 0x0008
|
|
#define ETH_StripCRC 0x0010
|
|
#define ETH_PassCtl 0x0020
|
|
#define ETH_IgnoreCRC 0x0040
|
|
#define ETH_EnAlign 0x0100
|
|
#define ETH_EnCRCErr 0x0200
|
|
#define ETH_EnOver 0x0400
|
|
#define ETH_EnLongErr 0x0800
|
|
#define ETH_EnRxPar 0x2000
|
|
#define ETH_EnGood 0x4000
|
|
|
|
/* Receive Status Register(MACRXSTAT) */
|
|
#define ETH_MCtlRecd 0x0020
|
|
#define ETH_MIntRx 0x0040
|
|
#define ETH_MRx10Stat 0x0080
|
|
#define ETH_MAllignErr 0x0100
|
|
#define ETH_MCRCErr 0x0200
|
|
#define ETH_MOverflow 0x0400
|
|
#define ETH_MLongErr 0x0800
|
|
#define ETH_MRxPar 0x2000
|
|
#define ETH_MRxGood 0x4000
|
|
#define ETH_MRxHalted 0x8000
|
|
|
|
/* type of ethernet packets */
|
|
#define ETH_TYPE_ARP (0x0806)
|
|
#define ETH_TYPE_IP (0x0800)
|
|
|
|
#define ETH_HDR_SIZE (14)
|
|
|
|
/* bit field for frame data pointer word */
|
|
typedef struct __BF_FrameDataPtr {
|
|
u32 dataPtr:31;
|
|
u32 owner: 1;
|
|
} BF_FrameDataPtr;
|
|
|
|
typedef union _FrameDataPtr {
|
|
u32 ui;
|
|
BF_FrameDataPtr bf;
|
|
} FrameDataPtr;
|
|
|
|
typedef struct __BF_TX_Options {
|
|
u32 no_padding: 1;
|
|
u32 no_crc: 1;
|
|
u32 macTxIrqEnbl: 1;
|
|
u32 littleEndian: 1;
|
|
u32 frameDataDir: 1;
|
|
u32 widgetAlign: 2;
|
|
u32 reserved:25;
|
|
} BF_TX_Options;
|
|
|
|
typedef union _TX_Options {
|
|
u32 ui;
|
|
BF_TX_Options bf;
|
|
} TX_Options;
|
|
|
|
typedef struct __BF_RX_Status {
|
|
u32 len:16; /* frame length */
|
|
u32 reserved1: 3;
|
|
u32 overMax: 1;
|
|
u32 reserved2: 1;
|
|
u32 ctrlRcv: 1;
|
|
u32 intRx: 1;
|
|
u32 rx10stat: 1;
|
|
u32 alignErr: 1;
|
|
u32 crcErr: 1;
|
|
u32 overFlow: 1;
|
|
u32 longErr: 1;
|
|
u32 reserved3: 1;
|
|
u32 parityErr: 1;
|
|
u32 good: 1;
|
|
u32 halted: 1;
|
|
} BF_RX_Status;
|
|
|
|
typedef union _RX_Status {
|
|
u32 ui;
|
|
BF_RX_Status bf;
|
|
} RX_Status;
|
|
|
|
typedef struct __BF_TX_Status {
|
|
u32 len:16; /* frame length */
|
|
u32 txCollCnt: 4;
|
|
u32 exColl: 1;
|
|
u32 txDefer: 1;
|
|
u32 paused: 1;
|
|
u32 intTx: 1;
|
|
u32 underRun: 1;
|
|
u32 defer: 1;
|
|
u32 noCarrier: 1;
|
|
u32 SQErr: 1;
|
|
u32 lateColl: 1;
|
|
u32 parityErr: 1;
|
|
u32 complete: 1;
|
|
u32 halted: 1;
|
|
} BF_TX_Status;
|
|
|
|
typedef union _TX_Status {
|
|
u32 ui;
|
|
BF_TX_Status bf;
|
|
} TX_Status;
|
|
|
|
/* TX descriptor structure */
|
|
typedef struct __TX_FrameDescriptor {
|
|
volatile FrameDataPtr m_frameDataPtr;
|
|
TX_Options m_opt;
|
|
volatile TX_Status m_status;
|
|
struct __TX_FrameDescriptor *m_nextFD;
|
|
} TX_FrameDescriptor;
|
|
|
|
/* RX descriptor structure */
|
|
typedef struct __RX_FrameDescriptor {
|
|
volatile FrameDataPtr m_frameDataPtr;
|
|
u32 m_reserved;
|
|
volatile RX_Status m_status;
|
|
struct __RX_FrameDescriptor *m_nextFD;
|
|
} RX_FrameDescriptor;
|
|
|
|
/* MAC Frame Structure */
|
|
typedef struct __MACFrame {
|
|
u8 m_dstAddr[6] __packed;
|
|
u8 m_srcAddr[6] __packed;
|
|
u16 m_lengthOrType __packed;
|
|
u8 m_payload[1506] __packed;
|
|
} MACFrame;
|
|
|
|
/* Ethernet Control block */
|
|
typedef struct __ETH {
|
|
TX_FrameDescriptor *m_curTX_FD; /* pointer to current TX frame descriptor */
|
|
TX_FrameDescriptor *m_baseTX_FD; /* pointer to base TX frame descriptor */
|
|
RX_FrameDescriptor *m_curRX_FD; /* pointer to current RX frame descriptor */
|
|
RX_FrameDescriptor *m_baseRX_FD; /* pointer to base RX frame descriptor */
|
|
u8 *m_mac; /* pointer to our MAC address */
|
|
} ETH;
|
|
|
|
#endif
|