7a85f32413
The requsted partition disk sector incorrectly has the parition start sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks() routine adds the diskobj->offset to the requested lba. When the device is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called which adds part-gpt_part_info.start. This causes I/O to the wrong sector. Takahiro Akashi suggested removing the offset field from the efi_disk_obj structure since disk-uclass.c handles the partition start biasing. Device types other than UCLASS_PARTITION set the diskobj->offset field to zero which makes the field unnecessary. This change removes the offset field from the structure and removes all references from the code which is isolated to the lib/efi_loader/efi_disk.c module. This change also adds a test for the EFI ReadBlocks() API in the EFI selftest code. There is already a test for reading a FAT file. The new test uses ReadBlocks() to read the same "disk" block and compare it to the data read from the file system API. Signed-Off-by: Paul Barbieri <plb365@gmail.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
560 lines
14 KiB
C
560 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* efi_selftest_block
|
|
*
|
|
* Copyright (c) 2017 Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
*
|
|
* This test checks the driver for block IO devices.
|
|
* A disk image is created in memory.
|
|
* A handle is created for the new block IO device.
|
|
* The block I/O protocol is installed on the handle.
|
|
* ConnectController is used to setup partitions and to install the simple
|
|
* file protocol.
|
|
* A known file is read from the file system and verified.
|
|
* The same block is read via the EFI_BLOCK_IO_PROTOCOL and compared to the file
|
|
* contents.
|
|
*/
|
|
|
|
#include <efi_selftest.h>
|
|
#include "efi_selftest_disk_image.h"
|
|
#include <asm/cache.h>
|
|
|
|
/* Block size of compressed disk image */
|
|
#define COMPRESSED_DISK_IMAGE_BLOCK_SIZE 8
|
|
|
|
/* Binary logarithm of the block size */
|
|
#define LB_BLOCK_SIZE 9
|
|
|
|
static struct efi_boot_services *boottime;
|
|
|
|
static const efi_guid_t block_io_protocol_guid = EFI_BLOCK_IO_PROTOCOL_GUID;
|
|
static const efi_guid_t guid_device_path = EFI_DEVICE_PATH_PROTOCOL_GUID;
|
|
static const efi_guid_t guid_simple_file_system_protocol =
|
|
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL_GUID;
|
|
static const efi_guid_t guid_file_system_info = EFI_FILE_SYSTEM_INFO_GUID;
|
|
static efi_guid_t guid_vendor =
|
|
EFI_GUID(0xdbca4c98, 0x6cb0, 0x694d,
|
|
0x08, 0x72, 0x81, 0x9c, 0x65, 0x0c, 0xb7, 0xb8);
|
|
|
|
static struct efi_device_path *dp;
|
|
|
|
/* One 8 byte block of the compressed disk image */
|
|
struct line {
|
|
size_t addr;
|
|
char *line;
|
|
};
|
|
|
|
/* Compressed disk image */
|
|
struct compressed_disk_image {
|
|
size_t length;
|
|
struct line lines[];
|
|
};
|
|
|
|
static const struct compressed_disk_image img = EFI_ST_DISK_IMG;
|
|
|
|
/* Decompressed disk image */
|
|
static u8 *image;
|
|
|
|
/*
|
|
* Reset service of the block IO protocol.
|
|
*
|
|
* @this block IO protocol
|
|
* Return: status code
|
|
*/
|
|
static efi_status_t EFIAPI reset(
|
|
struct efi_block_io *this,
|
|
char extended_verification)
|
|
{
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Read service of the block IO protocol.
|
|
*
|
|
* @this block IO protocol
|
|
* @media_id media id
|
|
* @lba start of the read in logical blocks
|
|
* @buffer_size number of bytes to read
|
|
* @buffer target buffer
|
|
* Return: status code
|
|
*/
|
|
static efi_status_t EFIAPI read_blocks(
|
|
struct efi_block_io *this, u32 media_id, u64 lba,
|
|
efi_uintn_t buffer_size, void *buffer)
|
|
{
|
|
u8 *start;
|
|
|
|
if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length)
|
|
return EFI_INVALID_PARAMETER;
|
|
start = image + (lba << LB_BLOCK_SIZE);
|
|
|
|
boottime->copy_mem(buffer, start, buffer_size);
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Write service of the block IO protocol.
|
|
*
|
|
* @this block IO protocol
|
|
* @media_id media id
|
|
* @lba start of the write in logical blocks
|
|
* @buffer_size number of bytes to read
|
|
* @buffer source buffer
|
|
* Return: status code
|
|
*/
|
|
static efi_status_t EFIAPI write_blocks(
|
|
struct efi_block_io *this, u32 media_id, u64 lba,
|
|
efi_uintn_t buffer_size, void *buffer)
|
|
{
|
|
u8 *start;
|
|
|
|
if ((lba << LB_BLOCK_SIZE) + buffer_size > img.length)
|
|
return EFI_INVALID_PARAMETER;
|
|
start = image + (lba << LB_BLOCK_SIZE);
|
|
|
|
boottime->copy_mem(start, buffer, buffer_size);
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Flush service of the block IO protocol.
|
|
*
|
|
* @this block IO protocol
|
|
* Return: status code
|
|
*/
|
|
static efi_status_t EFIAPI flush_blocks(struct efi_block_io *this)
|
|
{
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Decompress the disk image.
|
|
*
|
|
* @image decompressed disk image
|
|
* Return: status code
|
|
*/
|
|
static efi_status_t decompress(u8 **image)
|
|
{
|
|
u8 *buf;
|
|
size_t i;
|
|
size_t addr;
|
|
size_t len;
|
|
efi_status_t ret;
|
|
|
|
ret = boottime->allocate_pool(EFI_LOADER_DATA, img.length,
|
|
(void **)&buf);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Out of memory\n");
|
|
return ret;
|
|
}
|
|
boottime->set_mem(buf, img.length, 0);
|
|
|
|
for (i = 0; ; ++i) {
|
|
if (!img.lines[i].line)
|
|
break;
|
|
addr = img.lines[i].addr;
|
|
len = COMPRESSED_DISK_IMAGE_BLOCK_SIZE;
|
|
if (addr + len > img.length)
|
|
len = img.length - addr;
|
|
boottime->copy_mem(buf + addr, img.lines[i].line, len);
|
|
}
|
|
*image = buf;
|
|
return ret;
|
|
}
|
|
|
|
static struct efi_block_io_media media;
|
|
|
|
static struct efi_block_io block_io = {
|
|
.media = &media,
|
|
.reset = reset,
|
|
.read_blocks = read_blocks,
|
|
.write_blocks = write_blocks,
|
|
.flush_blocks = flush_blocks,
|
|
};
|
|
|
|
/* Handle for the block IO device */
|
|
static efi_handle_t disk_handle;
|
|
|
|
/*
|
|
* Setup unit test.
|
|
*
|
|
* @handle: handle of the loaded image
|
|
* @systable: system table
|
|
* Return: EFI_ST_SUCCESS for success
|
|
*/
|
|
static int setup(const efi_handle_t handle,
|
|
const struct efi_system_table *systable)
|
|
{
|
|
efi_status_t ret;
|
|
struct efi_device_path_vendor vendor_node;
|
|
struct efi_device_path end_node;
|
|
|
|
boottime = systable->boottime;
|
|
|
|
decompress(&image);
|
|
|
|
block_io.media->block_size = 1 << LB_BLOCK_SIZE;
|
|
block_io.media->last_block = (img.length >> LB_BLOCK_SIZE) - 1;
|
|
|
|
ret = boottime->install_protocol_interface(
|
|
&disk_handle, &block_io_protocol_guid,
|
|
EFI_NATIVE_INTERFACE, &block_io);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to install block I/O protocol\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
ret = boottime->allocate_pool(EFI_LOADER_DATA,
|
|
sizeof(struct efi_device_path_vendor) +
|
|
sizeof(struct efi_device_path),
|
|
(void **)&dp);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Out of memory\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
vendor_node.dp.type = DEVICE_PATH_TYPE_HARDWARE_DEVICE;
|
|
vendor_node.dp.sub_type = DEVICE_PATH_SUB_TYPE_VENDOR;
|
|
vendor_node.dp.length = sizeof(struct efi_device_path_vendor);
|
|
|
|
boottime->copy_mem(&vendor_node.guid, &guid_vendor,
|
|
sizeof(efi_guid_t));
|
|
boottime->copy_mem(dp, &vendor_node,
|
|
sizeof(struct efi_device_path_vendor));
|
|
end_node.type = DEVICE_PATH_TYPE_END;
|
|
end_node.sub_type = DEVICE_PATH_SUB_TYPE_END;
|
|
end_node.length = sizeof(struct efi_device_path);
|
|
|
|
boottime->copy_mem((char *)dp + sizeof(struct efi_device_path_vendor),
|
|
&end_node, sizeof(struct efi_device_path));
|
|
ret = boottime->install_protocol_interface(&disk_handle,
|
|
&guid_device_path,
|
|
EFI_NATIVE_INTERFACE,
|
|
dp);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("InstallProtocolInterface failed\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
return EFI_ST_SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Tear down unit test.
|
|
*
|
|
* Return: EFI_ST_SUCCESS for success
|
|
*/
|
|
static int teardown(void)
|
|
{
|
|
efi_status_t r = EFI_ST_SUCCESS;
|
|
|
|
if (disk_handle) {
|
|
r = boottime->uninstall_protocol_interface(disk_handle,
|
|
&guid_device_path,
|
|
dp);
|
|
if (r != EFI_SUCCESS) {
|
|
efi_st_error("Uninstall device path failed\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
r = boottime->uninstall_protocol_interface(
|
|
disk_handle, &block_io_protocol_guid,
|
|
&block_io);
|
|
if (r != EFI_SUCCESS) {
|
|
efi_st_error(
|
|
"Failed to uninstall block I/O protocol\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
}
|
|
|
|
if (image) {
|
|
r = boottime->free_pool(image);
|
|
if (r != EFI_SUCCESS) {
|
|
efi_st_error("Failed to free image\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
}
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Get length of device path without end tag.
|
|
*
|
|
* @dp device path
|
|
* Return: length of device path in bytes
|
|
*/
|
|
static efi_uintn_t dp_size(struct efi_device_path *dp)
|
|
{
|
|
struct efi_device_path *pos = dp;
|
|
|
|
while (pos->type != DEVICE_PATH_TYPE_END)
|
|
pos = (struct efi_device_path *)((char *)pos + pos->length);
|
|
return (char *)pos - (char *)dp;
|
|
}
|
|
|
|
/*
|
|
* Execute unit test.
|
|
*
|
|
* Return: EFI_ST_SUCCESS for success
|
|
*/
|
|
static int execute(void)
|
|
{
|
|
efi_status_t ret;
|
|
efi_uintn_t no_handles, i, len;
|
|
efi_handle_t *handles;
|
|
efi_handle_t handle_partition = NULL;
|
|
struct efi_device_path *dp_partition;
|
|
struct efi_block_io *block_io_protocol;
|
|
struct efi_simple_file_system_protocol *file_system;
|
|
struct efi_file_handle *root, *file;
|
|
struct {
|
|
struct efi_file_system_info info;
|
|
u16 label[12];
|
|
} system_info;
|
|
efi_uintn_t buf_size;
|
|
char buf[16] __aligned(ARCH_DMA_MINALIGN);
|
|
u32 part1_size;
|
|
u64 pos;
|
|
char block_io_aligned[1 << LB_BLOCK_SIZE] __aligned(1 << LB_BLOCK_SIZE);
|
|
|
|
/* Connect controller to virtual disk */
|
|
ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to connect controller\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
/* Get the handle for the partition */
|
|
ret = boottime->locate_handle_buffer(
|
|
BY_PROTOCOL, &guid_device_path, NULL,
|
|
&no_handles, &handles);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to locate handles\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
len = dp_size(dp);
|
|
for (i = 0; i < no_handles; ++i) {
|
|
ret = boottime->open_protocol(handles[i], &guid_device_path,
|
|
(void **)&dp_partition,
|
|
NULL, NULL,
|
|
EFI_OPEN_PROTOCOL_GET_PROTOCOL);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to open device path protocol\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (len >= dp_size(dp_partition))
|
|
continue;
|
|
if (memcmp(dp, dp_partition, len))
|
|
continue;
|
|
handle_partition = handles[i];
|
|
break;
|
|
}
|
|
ret = boottime->free_pool(handles);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to free pool memory\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (!handle_partition) {
|
|
efi_st_error("Partition handle not found\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
/* Open the block_io_protocol */
|
|
ret = boottime->open_protocol(handle_partition,
|
|
&block_io_protocol_guid,
|
|
(void **)&block_io_protocol, NULL, NULL,
|
|
EFI_OPEN_PROTOCOL_GET_PROTOCOL);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to open block IO protocol\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
/* Get size of first MBR partition */
|
|
memcpy(&part1_size, image + 0x1ca, sizeof(u32));
|
|
if (block_io_protocol->media->last_block != part1_size - 1) {
|
|
efi_st_error("Last LBA of partition %x, expected %x\n",
|
|
(unsigned int)block_io_protocol->media->last_block,
|
|
part1_size - 1);
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
/* Open the simple file system protocol */
|
|
ret = boottime->open_protocol(handle_partition,
|
|
&guid_simple_file_system_protocol,
|
|
(void **)&file_system, NULL, NULL,
|
|
EFI_OPEN_PROTOCOL_GET_PROTOCOL);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to open simple file system protocol\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
/* Open volume */
|
|
ret = file_system->open_volume(file_system, &root);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to open volume\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
buf_size = sizeof(system_info);
|
|
ret = root->getinfo(root, &guid_file_system_info, &buf_size,
|
|
&system_info);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to get file system info\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (system_info.info.block_size != 512) {
|
|
efi_st_error("Wrong block size %u, expected 512\n",
|
|
system_info.info.block_size);
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (efi_st_strcmp_16_8(system_info.info.volume_label, "U-BOOT TEST")) {
|
|
efi_st_todo(
|
|
"Wrong volume label '%ps', expected 'U-BOOT TEST'\n",
|
|
system_info.info.volume_label);
|
|
}
|
|
|
|
/* Read file */
|
|
ret = root->open(root, &file, u"hello.txt", EFI_FILE_MODE_READ,
|
|
0);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to open file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
ret = file->setpos(file, 1);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("SetPosition failed\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
buf_size = sizeof(buf) - 1;
|
|
ret = file->read(file, &buf_size, buf);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to read file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (buf_size != 12) {
|
|
efi_st_error("Wrong number of bytes read: %u\n",
|
|
(unsigned int)buf_size);
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (memcmp(buf, "ello world!", 11)) {
|
|
efi_st_error("Unexpected file content\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
ret = file->getpos(file, &pos);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("GetPosition failed\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (pos != 13) {
|
|
efi_st_error("GetPosition returned %u, expected 13\n",
|
|
(unsigned int)pos);
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
ret = file->close(file);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to close file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
/*
|
|
* Test that read_blocks() can read same file data.
|
|
*
|
|
* In the test data, the partition starts at block 1 and the file
|
|
* hello.txt with the content 'Hello world!' is located at 0x5000
|
|
* of the disk. Here we read block 0x27 (offset 0x4e00 of the
|
|
* partition) and expect the string 'Hello world!' to be at the
|
|
* start of block.
|
|
*/
|
|
ret = block_io_protocol->read_blocks(block_io_protocol,
|
|
block_io_protocol->media->media_id,
|
|
(0x5000 >> LB_BLOCK_SIZE) - 1,
|
|
block_io_protocol->media->block_size,
|
|
block_io_aligned);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("ReadBlocks failed\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
if (memcmp(block_io_aligned + 1, buf, 11)) {
|
|
efi_st_error("Unexpected block content\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
#ifdef CONFIG_FAT_WRITE
|
|
/* Write file */
|
|
ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
|
|
EFI_FILE_MODE_WRITE | EFI_FILE_MODE_CREATE, 0);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to open file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
buf_size = 7;
|
|
boottime->set_mem(buf, sizeof(buf), 0);
|
|
boottime->copy_mem(buf, "U-Boot", buf_size);
|
|
ret = file->write(file, &buf_size, buf);
|
|
if (ret != EFI_SUCCESS || buf_size != 7) {
|
|
efi_st_error("Failed to write file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
ret = file->getpos(file, &pos);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("GetPosition failed\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (pos != 7) {
|
|
efi_st_error("GetPosition returned %u, expected 7\n",
|
|
(unsigned int)pos);
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
ret = file->close(file);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to close file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
/* Verify file */
|
|
boottime->set_mem(buf, sizeof(buf), 0);
|
|
ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ,
|
|
0);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to open file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
buf_size = sizeof(buf) - 1;
|
|
ret = file->read(file, &buf_size, buf);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to read file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (buf_size != 7) {
|
|
efi_st_error("Wrong number of bytes read: %u\n",
|
|
(unsigned int)buf_size);
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
if (memcmp(buf, "U-Boot", 7)) {
|
|
efi_st_error("Unexpected file content %s\n", buf);
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
ret = file->close(file);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to close file\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
#else
|
|
efi_st_todo("CONFIG_FAT_WRITE is not set\n");
|
|
#endif /* CONFIG_FAT_WRITE */
|
|
|
|
/* Close volume */
|
|
ret = root->close(root);
|
|
if (ret != EFI_SUCCESS) {
|
|
efi_st_error("Failed to close volume\n");
|
|
return EFI_ST_FAILURE;
|
|
}
|
|
|
|
return EFI_ST_SUCCESS;
|
|
}
|
|
|
|
EFI_UNIT_TEST(blkdev) = {
|
|
.name = "block device",
|
|
.phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
|
|
.setup = setup,
|
|
.execute = execute,
|
|
.teardown = teardown,
|
|
};
|