872413bb0a
All uniphier v7 SoCs have cortex-a9 and use cortex-a9 global timer
in a simple implementation. Now DM_TIMER of it is available
on 35751c7f3f ("timer: sti: convert sti-timer to arm a9 global timer"),
so let's switch to it.
The old driver reads the lower 32bits of counter field
and sets the prescaler as 50 with PERIPHCLK(=50MHz),
so the global timer works as a 32-bit 1MHz timer.
The DM_TIMER uses the whole 64bits with no prescaler,
so the global timer works as a 64-bit PERIPHCLK timer.
CONFIG_SYS_HZ_CLOCK is set as the default PERIPHCLK frequency,
if there is no 'clocks' property in devicetree.
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
166 lines
4.8 KiB
C
166 lines
4.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2012-2015 Panasonic Corporation
|
|
* Copyright (C) 2015-2016 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
/* U-Boot - Common settings for UniPhier Family */
|
|
|
|
#ifndef __CONFIG_UNIPHIER_H__
|
|
#define __CONFIG_UNIPHIER_H__
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
|
|
#else
|
|
#define BOOT_TARGET_DEVICE_MMC(func)
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_UBIFS
|
|
#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0, UBI, boot)
|
|
#else
|
|
#define BOOT_TARGET_DEVICE_UBIFS(func)
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
|
|
#else
|
|
#define BOOT_TARGET_DEVICE_USB(func)
|
|
#endif
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
BOOT_TARGET_DEVICE_MMC(func) \
|
|
BOOT_TARGET_DEVICE_UBIFS(func) \
|
|
BOOT_TARGET_DEVICE_USB(func)
|
|
|
|
#if !defined(CONFIG_ARM64)
|
|
#define CFG_SYS_HZ_CLOCK 50000000
|
|
#endif
|
|
|
|
#define CFG_SYS_NAND_REGS_BASE 0x68100000
|
|
#define CFG_SYS_NAND_DATA_BASE 0x68000000
|
|
|
|
/*
|
|
* Network Configuration
|
|
*/
|
|
|
|
#if defined(CONFIG_ARM64)
|
|
/* ARM Trusted Firmware */
|
|
#define BOOT_IMAGES \
|
|
"second_image=unph_bl.bin\0" \
|
|
"third_image=fip.bin\0"
|
|
#else
|
|
#define BOOT_IMAGES \
|
|
"second_image=u-boot-spl.bin\0" \
|
|
"third_image=u-boot.bin\0"
|
|
#endif
|
|
|
|
#ifdef CONFIG_FIT
|
|
#define KERNEL_ADDR_R_OFFSET "0x05100000"
|
|
#define LINUXBOOT_ENV_SETTINGS \
|
|
"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
|
|
"bootm $kernel_addr_r\0" \
|
|
"__nfsboot=run tftpboot\0"
|
|
#else
|
|
#ifdef CONFIG_ARM64
|
|
#define LINUXBOOT_CMD "booti"
|
|
#define KERNEL_ADDR_R_OFFSET "0x02080000"
|
|
#else
|
|
#define LINUXBOOT_CMD "bootz"
|
|
#define KERNEL_ADDR_R_OFFSET "0x00208000"
|
|
#endif
|
|
#define LINUXBOOT_ENV_SETTINGS \
|
|
"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
|
|
LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
|
|
"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
|
|
"tftpboot $fdt_addr_r $fdtfile &&" \
|
|
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
|
|
"setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
|
|
"run boot_common\0" \
|
|
"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
|
|
"tftpboot $fdt_addr_r $fdtfile &&" \
|
|
"setenv ramdisk_addr_r - &&" \
|
|
"run boot_common\0"
|
|
#endif
|
|
|
|
#define CFG_EXTRA_ENV_SETTINGS \
|
|
"fdt_addr_r_offset=0x05100000\0" \
|
|
"kernel_addr_r_offset=" KERNEL_ADDR_R_OFFSET "\0" \
|
|
"ramdisk_addr_r_offset=0x06000000\0" \
|
|
"ramdisk_file=rootfs.cpio.gz\0" \
|
|
"netdev=eth0\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"loadaddr_offset=0x05000000\0" \
|
|
"script=boot.scr\0" \
|
|
"scriptaddr=0x85000000\0" \
|
|
"nor_base=0x42000000\0" \
|
|
"emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
|
|
"nandboot=run bootcmd_ubifs0\0" \
|
|
"norboot=run tftpboot\0" \
|
|
"sdboot=sdsetn && run bootcmd_mmc${sd_first_dev}\0" \
|
|
"usbboot=run bootcmd_usb0\0" \
|
|
"emmcscript=setenv devtype mmc && " \
|
|
"mmcsetn && " \
|
|
"setenv devnum ${mmc_first_dev} && " \
|
|
"run loadscript_fat\0" \
|
|
"nandscript=echo Running ${script} from ubi ... && " \
|
|
"ubi part UBI && " \
|
|
"ubifsmount ubi0:boot && " \
|
|
"ubifsload ${loadaddr} ${script} && " \
|
|
"source $loadaddr\0" \
|
|
"sdscript=setenv devtype mmc && " \
|
|
"sdsetn && " \
|
|
"setenv devnum ${sd_first_dev} && " \
|
|
"run loadscript_fat\0" \
|
|
"norscript=echo Running ${script} from tftp ... && " \
|
|
"tftpboot ${script} &&" \
|
|
"source $loadaddr\0" \
|
|
"usbscript=usb start && " \
|
|
"setenv devtype usb && " \
|
|
"setenv devnum 0 && " \
|
|
"run loadscript_fat\0" \
|
|
"loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
|
|
"load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
|
|
"source $loadaddr\0" \
|
|
"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
|
|
"tftpboot $tmp_addr $second_image && " \
|
|
"setexpr tmp_addr $nor_base + 0x70000 && " \
|
|
"tftpboot $tmp_addr $third_image\0" \
|
|
"emmcupdate=mmcsetn &&" \
|
|
"mmc dev $mmc_first_dev &&" \
|
|
"mmc partconf $mmc_first_dev 0 1 1 &&" \
|
|
"tftpboot $second_image && " \
|
|
"mmc write $loadaddr 0 100 && " \
|
|
"tftpboot $third_image && " \
|
|
"mmc write $loadaddr 100 f00\0" \
|
|
"nandupdate=nand erase 0 0x00100000 &&" \
|
|
"tftpboot $second_image && " \
|
|
"nand write $loadaddr 0 0x00020000 && " \
|
|
"tftpboot $third_image && " \
|
|
"nand write $loadaddr 0x00020000 0x001e0000\0" \
|
|
"sdupdate=sdsetn &&" \
|
|
"mmc dev $sd_first_dev &&" \
|
|
"tftpboot $second_image && " \
|
|
"mmc write $loadaddr 0 100 && " \
|
|
"tftpboot $third_image && " \
|
|
"mmc write $loadaddr 100 f00\0" \
|
|
"usbupdate=usb start &&" \
|
|
"tftpboot $second_image && " \
|
|
"usb write $loadaddr 0 100 && " \
|
|
"tftpboot $third_image && " \
|
|
"usb write $loadaddr 100 f00\0" \
|
|
BOOT_IMAGES \
|
|
LINUXBOOT_ENV_SETTINGS \
|
|
BOOTENV
|
|
|
|
#define CFG_SYS_BOOTMAPSZ 0x20000000
|
|
|
|
/* only for SPL */
|
|
|
|
/* subtract sizeof(struct legacy_img_hdr) */
|
|
#define CFG_SYS_UBOOT_BASE (0x130000 - 0x40)
|
|
|
|
#endif /* __CONFIG_UNIPHIER_H__ */
|