leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
u-boot/include/configs/kmcent2.h
Tom Rini 0478dac62a kbuild: Remove uncmd_spl logic 
At this point in the conversion there should be no need to have logic to
disable some symbol during the SPL build as all symbols should have an
SPL counterpart.

The main real changes done here are that we now must make proper use of
CONFIG_IS_ENABLED(DM_SERIAL) rather than many of the odd tricks we
developed prior to CONFIG_IS_ENABLED() being available.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:15:13 -05:00

378 lines
13 KiB
C
Raw Permalink Blame History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2016 Keymile AG
* Rainer Boschung <rainer.boschung@keymile.com>
*
*/
#ifndef __KMCENT2_H
#define __KMCENT2_H
/* Application IFC chip selects */
#define SYS_LAWAPP_BASE 0xc0000000
#define SYS_LAWAPP_BASE_PHYS (0xf00000000ull | SYS_LAWAPP_BASE)
/* Application IFC CS4 MRAM */
#define CFG_SYS_MRAM_BASE SYS_LAWAPP_BASE
#define SYS_MRAM_BASE_PHYS SYS_LAWAPP_BASE_PHYS
#define SYS_MRAM_CSPR_EXT (0x0f)
#define SYS_MRAM_CSPR (CSPR_PHYS_ADDR(CFG_SYS_MRAM_BASE) | \
CSPR_PORT_SIZE_8 | /* 8 bit */ \
CSPR_MSEL_GPCM | /* msel = gpcm */ \
CSPR_V /* bank is valid */)
#define SYS_MRAM_AMASK IFC_AMASK(2 * 1024 * 1024) /* 2 MiB */
#define SYS_MRAM_CSOR CSOR_GPCM_TRHZ_40
/* MRAM Timing parameters for IFC CS4 */
#define SYS_MRAM_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_MRAM_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0xe))
#define SYS_MRAM_FTIM2 (FTIM2_GPCM_TCS(0x2) | \
FTIM2_GPCM_TCH(0x2) | \
FTIM2_GPCM_TWP(0x8))
#define SYS_MRAM_FTIM3 0x04000000
#define CFG_SYS_CSPR4_EXT SYS_MRAM_CSPR_EXT
#define CFG_SYS_CSPR4 SYS_MRAM_CSPR
#define CFG_SYS_AMASK4 SYS_MRAM_AMASK
#define CFG_SYS_CSOR4 SYS_MRAM_CSOR
#define CFG_SYS_CS4_FTIM0 SYS_MRAM_FTIM0
#define CFG_SYS_CS4_FTIM1 SYS_MRAM_FTIM1
#define CFG_SYS_CS4_FTIM2 SYS_MRAM_FTIM2
#define CFG_SYS_CS4_FTIM3 SYS_MRAM_FTIM3
/* Application IFC CS6: BFTIC */
#define SYS_BFTIC_BASE 0xd0000000
#define SYS_BFTIC_BASE_PHYS (0xf00000000ull | SYS_BFTIC_BASE)
#define SYS_BFTIC_CSPR_EXT (0x0f)
#define SYS_BFTIC_CSPR (CSPR_PHYS_ADDR(SYS_BFTIC_BASE) | \
CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
CSPR_MSEL_GPCM | /* MSEL = GPCM */\
CSPR_V) /* valid */
#define SYS_BFTIC_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define SYS_BFTIC_CSOR CSOR_GPCM_TRHZ_40
/* BFTIC Timing parameters for IFC CS6 */
#define SYS_BFTIC_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_BFTIC_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0x12))
#define SYS_BFTIC_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
FTIM2_GPCM_TCH(0x1) | \
FTIM2_GPCM_TWP(0x12))
#define SYS_BFTIC_FTIM3 0x04000000
#define CFG_SYS_CSPR6_EXT SYS_BFTIC_CSPR_EXT
#define CFG_SYS_CSPR6 SYS_BFTIC_CSPR
#define CFG_SYS_AMASK6 SYS_BFTIC_AMASK
#define CFG_SYS_CSOR6 SYS_BFTIC_CSOR
#define CFG_SYS_CS6_FTIM0 SYS_BFTIC_FTIM0
#define CFG_SYS_CS6_FTIM1 SYS_BFTIC_FTIM1
#define CFG_SYS_CS6_FTIM2 SYS_BFTIC_FTIM2
#define CFG_SYS_CS6_FTIM3 SYS_BFTIC_FTIM3
/* Application IFC CS7 PAXE */
#define CFG_SYS_PAXE_BASE 0xd8000000
#define SYS_PAXE_BASE_PHYS (0xf00000000ull | CFG_SYS_PAXE_BASE)
#define SYS_PAXE_CSPR_EXT (0x0f)
#define SYS_PAXE_CSPR (CSPR_PHYS_ADDR(CFG_SYS_PAXE_BASE) | \
CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
CSPR_MSEL_GPCM | /* MSEL = GPCM */\
CSPR_V) /* valid */
#define SYS_PAXE_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define SYS_PAXE_CSOR CSOR_GPCM_TRHZ_40
/* PAXE Timing parameters for IFC CS7 */
#define SYS_PAXE_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_PAXE_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0x12))
#define SYS_PAXE_FTIM2 (FTIM2_GPCM_TCS(0x3) | \
FTIM2_GPCM_TCH(0x1) | \
FTIM2_GPCM_TWP(0x12))
#define SYS_PAXE_FTIM3 0x04000000
#define CFG_SYS_CSPR7_EXT SYS_PAXE_CSPR_EXT
#define CFG_SYS_CSPR7 SYS_PAXE_CSPR
#define CFG_SYS_AMASK7 SYS_PAXE_AMASK
#define CFG_SYS_CSOR7 SYS_PAXE_CSOR
#define CFG_SYS_CS7_FTIM0 SYS_PAXE_FTIM0
#define CFG_SYS_CS7_FTIM1 SYS_PAXE_FTIM1
#define CFG_SYS_CS7_FTIM2 SYS_PAXE_FTIM2
#define CFG_SYS_CS7_FTIM3 SYS_PAXE_FTIM3
/* PRST */
#define KM_BFTIC4_RST 0
#define KM_DPAXE_RST 1
#define KM_FEMT_RST 3
#define KM_FOAM_RST 4
#define KM_EFE_RST 5
#define KM_ES_PHY_RST 6
#define KM_XES_PHY_RST 7
#define KM_ZL30158_RST 8
#define KM_ZL30364_RST 9
#define KM_BOBCAT_RST 10
#define KM_ETHSW_DDR_RST 12
#define KM_CFE_RST 13
#define KM_PEXSW_RST 14
#define KM_PEXSW_NT_RST 15
/* QRIO GPIOs used for deblocking */
#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A
#define KM_I2C_DEBLOCK_SCL 20
#define KM_I2C_DEBLOCK_SDA 21
/* High Level Configuration Options */
#define CFG_RESET_VECTOR_ADDRESS 0xebfffffc
#define CFG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
/* Environment in parallel NOR-Flash */
#define CFG_ENV_TOTAL_SIZE 0x040000
#define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/
/*
* These can be toggled for performance analysis, otherwise use default.
*/
#define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E
/* POST memory regions test */
#define CFG_POST CFG_SYS_POST_MEM_REGIONS
/*
* Config the L3 Cache as L3 SRAM
*/
#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000
#define CFG_SYS_DCSRBAR 0xf0000000
#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull
/*
* DDR Setup
*/
#define CFG_SYS_DDR_SDRAM_BASE 0x00000000
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#define SPD_EEPROM_ADDRESS 0x54
#define CFG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
/******************************************************************************
* (PRAM usage)
* ... -------------------------------------------------------
* ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM
* ... |<------------------- pram -------------------------->|
* ... -------------------------------------------------------
* @END_OF_RAM:
* @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
* @CONFIG_KM_PHRAM: address for /var
* @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
*/
/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
* is not valid yet, which is the case for when u-boot copies itself to RAM
*/
#define CFG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10)
/*
* IFC Definitions
*/
/* NOR flash on IFC CS0 */
#define CFG_SYS_FLASH_BASE 0xe8000000
#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | \
CFG_SYS_FLASH_BASE)
#define CFG_SYS_NOR_CSPR_EXT (0x0f)
#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE) | \
CSPR_PORT_SIZE_16 | /* Port size = 16 bit */\
0x00000010 | /* drive TE high */\
CSPR_MSEL_NOR | /* MSEL = NOR */\
CSPR_V) /* valid */
#define CFG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024) /* 64MB */
#define CFG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN | /* AVD toggle */\
CSOR_NOR_TRHZ_20 | \
CSOR_NOR_BCTLD)
/* NOR Flash Timing Params */
#define CFG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
FTIM0_NOR_TEADC(0x7) | \
FTIM0_NOR_TEAHC(0x1))
#define CFG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
FTIM1_NOR_TRAD_NOR(0x21) | \
FTIM1_NOR_TSEQRAD_NOR(0x21))
#define CFG_SYS_NOR_FTIM2 (FTIM2_NOR_TCH(0x1) | \
FTIM2_NOR_TCS(0x1) | \
FTIM2_NOR_TWP(0xb) | \
FTIM2_NOR_TWPH(0x6))
#define CFG_SYS_NOR_FTIM3 0x0
#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT
#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR
#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
/* More NOR Flash params */
#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS}
/* NAND Flash on IFC CS1*/
#define CFG_SYS_NAND_BASE 0xfa000000
#define CFG_SYS_NAND_BASE_PHYS (0xf00000000ull | CFG_SYS_NAND_BASE)
#define CFG_SYS_NAND_CSPR_EXT (0x0f)
#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE) | \
CSPR_PORT_SIZE_8 | /* Port Size = 8 bit */\
0x00000010 | /* drive TE high */\
CSPR_MSEL_NAND | /* MSEL = NAND */\
CSPR_V) /* valid */
#define CFG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN | /* ECC encoder on */ \
CSOR_NAND_ECC_DEC_EN | /* ECC decoder on */ \
CSOR_NAND_ECC_MODE_4 | /* 4-bit ECC */ \
CSOR_NAND_RAL_3 | /* RAL = 3Bytes */ \
CSOR_NAND_PGS_2K | /* Page size = 2K */ \
CSOR_NAND_SPRZ_128 | /* Spare size = 128 */ \
CSOR_NAND_PB(64) | /* 64 Pages/Block */ \
CSOR_NAND_TRHZ_40 | /**/ \
CSOR_NAND_BCTLD) /**/
/* ONFI NAND Flash mode0 Timing Params */
#define CFG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) | \
FTIM0_NAND_TWP(0x8) | \
FTIM0_NAND_TWCHT(0x3) | \
FTIM0_NAND_TWH(0x5))
#define CFG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) | \
FTIM1_NAND_TWBE(0x1e) | \
FTIM1_NAND_TRR(0x6) | \
FTIM1_NAND_TRP(0x8))
#define CFG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) | \
FTIM2_NAND_TREH(0x5) | \
FTIM2_NAND_TWHRE(0x3c))
#define CFG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e))
#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT
#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR
#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK
#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR
#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0
#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1
#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2
#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
/* More NAND Flash Params */
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
/* QRIO on IFC CS2 */
#define CFG_SYS_QRIO_BASE 0xfb000000
#define CFG_SYS_QRIO_BASE_PHYS (0xf00000000ull | CFG_SYS_QRIO_BASE)
#define SYS_QRIO_CSPR_EXT (0x0f)
#define SYS_QRIO_CSPR (CSPR_PHYS_ADDR(CFG_SYS_QRIO_BASE) | \
CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\
0x00000010 | /* drive TE high */\
CSPR_MSEL_GPCM | /* MSEL = GPCM */\
CSPR_V) /* valid */
#define SYS_QRIO_AMASK IFC_AMASK(64 * 1024) /* 64kB */
#define SYS_QRIO_CSOR (CSOR_GPCM_TRHZ_20 |\
CSOR_GPCM_BCTLD)
/* QRIO Timing parameters for IFC CS2 */
#define SYS_QRIO_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define SYS_QRIO_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0x6))
#define SYS_QRIO_FTIM2 (FTIM2_GPCM_TCS(0x1) | \
FTIM2_GPCM_TCH(0x1) | \
FTIM2_GPCM_TWP(0x7))
#define SYS_QRIO_FTIM3 0x04000000
#define CFG_SYS_CSPR2_EXT SYS_QRIO_CSPR_EXT
#define CFG_SYS_CSPR2 SYS_QRIO_CSPR
#define CFG_SYS_AMASK2 SYS_QRIO_AMASK
#define CFG_SYS_CSOR2 SYS_QRIO_CSOR
#define CFG_SYS_CS2_FTIM0 SYS_QRIO_FTIM0
#define CFG_SYS_CS2_FTIM1 SYS_QRIO_FTIM1
#define CFG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2
#define CFG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3
/* define to use L1 as initial stack */
#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000
/* The assembler doesn't like typecast */
#define CFG_SYS_INIT_RAM_ADDR_PHYS \
((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
CFG_SYS_INIT_RAM_ADDR_PHYS_LOW)
#define CFG_SYS_INIT_RAM_SIZE 0x00004000
#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
/*
* Serial Port - controlled on board with jumper J8
* open - index 2
* shorted - index 1
* Retain non-DM serial port for debug purposes.
*/
#if !CONFIG_IS_ENABLED(DM_SERIAL)
#define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR + 0x11C500)
#endif
#ifndef __ASSEMBLY__
void set_sda(int state);
void set_scl(int state);
int get_sda(void);
int get_scl(void);
#endif
/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* controller 1 */
#define CFG_SYS_PCIE1_MEM_VIRT 0x80000000
#define CFG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
#define CFG_SYS_PCIE1_IO_VIRT 0xf8000000
#define CFG_SYS_PCIE1_IO_PHYS 0xff8000000ull
#define CFG_SYS_BMAN_NUM_PORTALS 10
#define CFG_SYS_BMAN_MEM_BASE 0xf4000000
#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull
#define CFG_SYS_BMAN_MEM_SIZE 0x02000000
#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000
#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1)
#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \
CFG_SYS_BMAN_CENA_SIZE)
#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1)
#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08
#define CFG_SYS_QMAN_NUM_PORTALS 10
#define CFG_SYS_QMAN_MEM_BASE 0xf6000000
#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull
#define CFG_SYS_QMAN_MEM_SIZE 0x02000000
#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000
#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1)
#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \
CFG_SYS_QMAN_CENA_SIZE)
#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1)
#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08
/* Qman / Bman */
/* RGMII (FM1@DTESC5) is local managemant interface */
#define CFG_SYS_RGMII2_PHY_ADDR 0x11
/*
* Hardware Watchdog
*/
#define CFG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) ~10min */
#define CFG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */
/*
* For booting Linux, the board info and command line data
* have to be in the first 64 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
#endif /* __KMCENT2_H */
Reference in New Issue View Git Blame Copy Permalink