u-boot/include/configs/chiliboard.h
Tom Rini 0613c36a7a global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFG
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 10:09:42 -05:00

123 lines
3.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Grinn - http://grinn-global.com/
*/
#ifndef __CONFIG_CHILIBOARD_H
#define __CONFIG_CHILIBOARD_H
#include <configs/ti_am335x_common.h>
/* Clock Defines */
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
#define NANDARGS \
"nandargs=setenv bootargs console=${console} ${optargs} " \
"${mtdparts} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
"nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system\0" \
"nandrootfstype=ubifs rootwait\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"nand read ${fdt_addr} NAND.u-boot-spl-os; " \
"nand read ${loadaddr} NAND.kernel; " \
"bootz ${loadaddr} - ${fdt_addr}\0"
#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"fdt_addr=0x87800000\0" \
"boot_fdt=try\0" \
"console=ttyO0,115200n8\0" \
"image=zImage\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"ip_dyn=yes\0" \
"optargs=\0" \
"loadbootscript=" \
"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${boot_dir}/${image}\0" \
"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} " \
"${boot_dir}/${fdt_file}\0" \
"mmcdev=0\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} " \
"${mtdparts} " \
"root=${mmcroot}\0" \
"mmcloados=run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
"mmcboot=mmc dev ${mmcdev}; " \
"if mmc rescan; then " \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadimage; then " \
"run mmcloados;" \
"fi;" \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} ${optargs} " \
"${mtdparts} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
"if test ${ip_dyn} = yes; then " \
"setenv get_cmd dhcp; " \
"else " \
"setenv get_cmd tftp; " \
"fi; " \
"${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
NANDARGS
/* NS16550 Configuration */
#define CFG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
#define CFG_SYS_NS16550_COM2 0x48022000 /* UART1 */
#define CFG_SYS_NS16550_COM3 0x48024000 /* UART2 */
#define CFG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
#define CFG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
#define CFG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
/* SPL */
/* NAND: device related configs */
/* NAND: driver related configs */
#define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
26, 27, 28, 29, 30, 31, 32, 33, \
34, 35, 36, 37, 38, 39, 40, 41, \
42, 43, 44, 45, 46, 47, 48, 49, \
50, 51, 52, 53, 54, 55, 56, 57, }
#define CFG_SYS_NAND_ECCSIZE 512
#define CFG_SYS_NAND_ECCBYTES 14
#endif /* ! __CONFIG_CHILIBOARD_H */