5d88902401
The EFI subsystem accesses the real time clock and is enabled by default. So we should drop any CONFIG_CMD_DATE dependency from the real time clock drivers. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
79 lines
2.0 KiB
C
79 lines
2.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2010
|
|
* Reinhard Meyer, reinhard.meyer@emk-elektronik.de
|
|
*/
|
|
|
|
/*
|
|
* Date & Time support for the internal Real-time Timer
|
|
* of AT91SAM9260 and compatibles.
|
|
* Compatible with the LinuX rtc driver workaround:
|
|
* The RTT cannot be written to, but only reset.
|
|
* The actual time is the sum of RTT and one of
|
|
* the four GPBR registers.
|
|
*
|
|
* The at91sam9260 has 4 GPBR (0-3).
|
|
* For their typical use see at91_gpbr.h !
|
|
*
|
|
* make sure u-boot and kernel use the same GPBR !
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <rtc.h>
|
|
#include <asm/io.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_rtt.h>
|
|
#include <asm/arch/at91_gpbr.h>
|
|
|
|
int rtc_get (struct rtc_time *tmp)
|
|
{
|
|
at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
|
|
at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
|
|
ulong tim;
|
|
ulong tim2;
|
|
ulong off;
|
|
|
|
do {
|
|
tim = readl(&rtt->vr);
|
|
tim2 = readl(&rtt->vr);
|
|
} while (tim!=tim2);
|
|
off = readl(&gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
|
|
/* off==0 means time is invalid, but we ignore that */
|
|
rtc_to_tm(tim+off, tmp);
|
|
return 0;
|
|
}
|
|
|
|
int rtc_set (struct rtc_time *tmp)
|
|
{
|
|
at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
|
|
at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
|
|
ulong tim;
|
|
|
|
tim = rtc_mktime(tmp);
|
|
|
|
/* clear alarm, set prescaler to 32768, clear counter */
|
|
writel(32768+AT91_RTT_RTTRST, &rtt->mr);
|
|
writel(~0, &rtt->ar);
|
|
writel(tim, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
|
|
/* wait for counter clear to happen, takes less than a 1/32768th second */
|
|
while (readl(&rtt->vr) != 0)
|
|
;
|
|
return 0;
|
|
}
|
|
|
|
void rtc_reset (void)
|
|
{
|
|
at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT;
|
|
at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR;
|
|
|
|
/* clear alarm, set prescaler to 32768, clear counter */
|
|
writel(32768+AT91_RTT_RTTRST, &rtt->mr);
|
|
writel(~0, &rtt->ar);
|
|
writel(0, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]);
|
|
/* wait for counter clear to happen, takes less than a 1/32768th second */
|
|
while (readl(&rtt->vr) != 0)
|
|
;
|
|
}
|