caa4daa2ae
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
1159 lines
31 KiB
C
1159 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015 Google, Inc
|
|
* Written by Simon Glass <sjg@chromium.org>
|
|
*
|
|
* Based on Rockchip's drivers/power/pmic/pmic_rk808.c:
|
|
* Copyright (C) 2012 rockchips
|
|
* zyw <zyw@rock-chips.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <power/rk8xx_pmic.h>
|
|
#include <power/pmic.h>
|
|
#include <power/regulator.h>
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define ENABLE_DRIVER
|
|
#endif
|
|
|
|
/* Not used or exisit register and configure */
|
|
#define NA 0xff
|
|
|
|
/* Field Definitions */
|
|
#define RK808_BUCK_VSEL_MASK 0x3f
|
|
#define RK808_BUCK4_VSEL_MASK 0xf
|
|
#define RK808_LDO_VSEL_MASK 0x1f
|
|
|
|
/* RK809 BUCK5 */
|
|
#define RK809_BUCK5_CONFIG(n) (0xde + (n) * 1)
|
|
#define RK809_BUCK5_VSEL_MASK 0x07
|
|
|
|
/* RK817 BUCK */
|
|
#define RK817_BUCK_ON_VSEL(n) (0xbb + 3 * ((n) - 1))
|
|
#define RK817_BUCK_SLP_VSEL(n) (0xbc + 3 * ((n) - 1))
|
|
#define RK817_BUCK_VSEL_MASK 0x7f
|
|
#define RK817_BUCK_CONFIG(i) (0xba + (i) * 3)
|
|
|
|
/* RK817 LDO */
|
|
#define RK817_LDO_ON_VSEL(n) (0xcc + 2 * ((n) - 1))
|
|
#define RK817_LDO_SLP_VSEL(n) (0xcd + 2 * ((n) - 1))
|
|
#define RK817_LDO_VSEL_MASK 0x7f
|
|
|
|
/* RK817 ENABLE */
|
|
#define RK817_POWER_EN(n) (0xb1 + (n))
|
|
#define RK817_POWER_SLP_EN(n) (0xb5 + (n))
|
|
|
|
#define RK818_BUCK_VSEL_MASK 0x3f
|
|
#define RK818_BUCK4_VSEL_MASK 0x1f
|
|
#define RK818_LDO_VSEL_MASK 0x1f
|
|
#define RK818_LDO3_ON_VSEL_MASK 0xf
|
|
#define RK818_BOOST_ON_VSEL_MASK 0xe0
|
|
#define RK818_USB_ILIM_SEL_MASK 0x0f
|
|
#define RK818_USB_CHG_SD_VSEL_MASK 0x70
|
|
|
|
/*
|
|
* Ramp delay
|
|
*/
|
|
#define RK805_RAMP_RATE_OFFSET 3
|
|
#define RK805_RAMP_RATE_MASK (3 << RK805_RAMP_RATE_OFFSET)
|
|
#define RK805_RAMP_RATE_3MV_PER_US (0 << RK805_RAMP_RATE_OFFSET)
|
|
#define RK805_RAMP_RATE_6MV_PER_US (1 << RK805_RAMP_RATE_OFFSET)
|
|
#define RK805_RAMP_RATE_12_5MV_PER_US (2 << RK805_RAMP_RATE_OFFSET)
|
|
#define RK805_RAMP_RATE_25MV_PER_US (3 << RK805_RAMP_RATE_OFFSET)
|
|
|
|
#define RK808_RAMP_RATE_OFFSET 3
|
|
#define RK808_RAMP_RATE_MASK (3 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_2MV_PER_US (0 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_4MV_PER_US (1 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
|
|
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
|
|
|
|
#define RK817_RAMP_RATE_OFFSET 6
|
|
#define RK817_RAMP_RATE_MASK (0x3 << RK817_RAMP_RATE_OFFSET)
|
|
#define RK817_RAMP_RATE_3MV_PER_US (0x0 << RK817_RAMP_RATE_OFFSET)
|
|
#define RK817_RAMP_RATE_6_3MV_PER_US (0x1 << RK817_RAMP_RATE_OFFSET)
|
|
#define RK817_RAMP_RATE_12_5MV_PER_US (0x2 << RK817_RAMP_RATE_OFFSET)
|
|
#define RK817_RAMP_RATE_25MV_PER_US (0x3 << RK817_RAMP_RATE_OFFSET)
|
|
|
|
struct rk8xx_reg_info {
|
|
uint min_uv;
|
|
uint step_uv;
|
|
u8 vsel_reg;
|
|
u8 vsel_sleep_reg;
|
|
u8 config_reg;
|
|
u8 vsel_mask;
|
|
u8 min_sel;
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk808_buck[] = {
|
|
{ 712500, 12500, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK808_BUCK_VSEL_MASK, },
|
|
{ 712500, 12500, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK808_BUCK_VSEL_MASK, },
|
|
{ 712500, 12500, NA, NA, REG_BUCK3_CONFIG, RK808_BUCK_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_BUCK4_ON_VSEL, REG_BUCK4_SLP_VSEL, REG_BUCK4_CONFIG, RK808_BUCK4_VSEL_MASK, },
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk816_buck[] = {
|
|
/* buck 1 */
|
|
{ 712500, 12500, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, 0x00, },
|
|
{ 1800000, 200000, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, 0x3c, },
|
|
{ 2300000, 0, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, 0x3f, },
|
|
/* buck 2 */
|
|
{ 712500, 12500, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, 0x00, },
|
|
{ 1800000, 200000, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, 0x3c, },
|
|
{ 2300000, 0, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, 0x3f, },
|
|
/* buck 3 */
|
|
{ 712500, 12500, NA, NA, REG_BUCK3_CONFIG, RK818_BUCK_VSEL_MASK, },
|
|
/* buck 4 */
|
|
{ 800000, 100000, REG_BUCK4_ON_VSEL, REG_BUCK4_SLP_VSEL, REG_BUCK4_CONFIG, RK818_BUCK4_VSEL_MASK, },
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk809_buck5[] = {
|
|
/* buck 5 */
|
|
{ 1500000, 0, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x00, },
|
|
{ 1800000, 200000, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x01, },
|
|
{ 2800000, 200000, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x04, },
|
|
{ 3300000, 300000, RK809_BUCK5_CONFIG(0), RK809_BUCK5_CONFIG(1), NA, RK809_BUCK5_VSEL_MASK, 0x06, },
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk817_buck[] = {
|
|
/* buck 1 */
|
|
{ 500000, 12500, RK817_BUCK_ON_VSEL(1), RK817_BUCK_SLP_VSEL(1), RK817_BUCK_CONFIG(1), RK817_BUCK_VSEL_MASK, 0x00, },
|
|
{ 1500000, 100000, RK817_BUCK_ON_VSEL(1), RK817_BUCK_SLP_VSEL(1), RK817_BUCK_CONFIG(1), RK817_BUCK_VSEL_MASK, 0x50, },
|
|
{ 2400000, 0, RK817_BUCK_ON_VSEL(1), RK817_BUCK_SLP_VSEL(1), RK817_BUCK_CONFIG(1), RK817_BUCK_VSEL_MASK, 0x59, },
|
|
/* buck 2 */
|
|
{ 500000, 12500, RK817_BUCK_ON_VSEL(2), RK817_BUCK_SLP_VSEL(2), RK817_BUCK_CONFIG(2), RK817_BUCK_VSEL_MASK, 0x00, },
|
|
{ 1500000, 100000, RK817_BUCK_ON_VSEL(2), RK817_BUCK_SLP_VSEL(2), RK817_BUCK_CONFIG(2), RK817_BUCK_VSEL_MASK, 0x50, },
|
|
{ 2400000, 0, RK817_BUCK_ON_VSEL(2), RK817_BUCK_SLP_VSEL(2), RK817_BUCK_CONFIG(2), RK817_BUCK_VSEL_MASK, 0x59, },
|
|
/* buck 3 */
|
|
{ 500000, 12500, RK817_BUCK_ON_VSEL(3), RK817_BUCK_SLP_VSEL(3), RK817_BUCK_CONFIG(3), RK817_BUCK_VSEL_MASK, 0x00, },
|
|
{ 1500000, 100000, RK817_BUCK_ON_VSEL(3), RK817_BUCK_SLP_VSEL(3), RK817_BUCK_CONFIG(3), RK817_BUCK_VSEL_MASK, 0x50, },
|
|
{ 2400000, 0, RK817_BUCK_ON_VSEL(3), RK817_BUCK_SLP_VSEL(3), RK817_BUCK_CONFIG(3), RK817_BUCK_VSEL_MASK, 0x59, },
|
|
/* buck 4 */
|
|
{ 500000, 12500, RK817_BUCK_ON_VSEL(4), RK817_BUCK_SLP_VSEL(4), RK817_BUCK_CONFIG(4), RK817_BUCK_VSEL_MASK, 0x00, },
|
|
{ 1500000, 100000, RK817_BUCK_ON_VSEL(4), RK817_BUCK_SLP_VSEL(4), RK817_BUCK_CONFIG(4), RK817_BUCK_VSEL_MASK, 0x50, },
|
|
{ 3400000, 0, RK817_BUCK_ON_VSEL(4), RK817_BUCK_SLP_VSEL(4), RK817_BUCK_CONFIG(4), RK817_BUCK_VSEL_MASK, 0x63, },
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk818_buck[] = {
|
|
{ 712500, 12500, REG_BUCK1_ON_VSEL, REG_BUCK1_SLP_VSEL, REG_BUCK1_CONFIG, RK818_BUCK_VSEL_MASK, },
|
|
{ 712500, 12500, REG_BUCK2_ON_VSEL, REG_BUCK2_SLP_VSEL, REG_BUCK2_CONFIG, RK818_BUCK_VSEL_MASK, },
|
|
{ 712500, 12500, NA, NA, REG_BUCK3_CONFIG, RK818_BUCK_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_BUCK4_ON_VSEL, REG_BUCK4_SLP_VSEL, REG_BUCK4_CONFIG, RK818_BUCK4_VSEL_MASK, },
|
|
};
|
|
|
|
#ifdef ENABLE_DRIVER
|
|
static const struct rk8xx_reg_info rk808_ldo[] = {
|
|
{ 1800000, 100000, REG_LDO1_ON_VSEL, REG_LDO1_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO2_ON_VSEL, REG_LDO2_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO3_ON_VSEL, REG_LDO3_SLP_VSEL, NA, RK808_BUCK4_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO4_ON_VSEL, REG_LDO4_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO5_ON_VSEL, REG_LDO5_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO6_ON_VSEL, REG_LDO6_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO7_ON_VSEL, REG_LDO7_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO8_ON_VSEL, REG_LDO8_SLP_VSEL, NA, RK808_LDO_VSEL_MASK, },
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk816_ldo[] = {
|
|
{ 800000, 100000, REG_LDO1_ON_VSEL, REG_LDO1_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO2_ON_VSEL, REG_LDO2_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO3_ON_VSEL, REG_LDO3_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO4_ON_VSEL, REG_LDO4_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO5_ON_VSEL, REG_LDO5_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO6_ON_VSEL, REG_LDO6_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk817_ldo[] = {
|
|
/* ldo1 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(1), RK817_LDO_SLP_VSEL(1), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(1), RK817_LDO_SLP_VSEL(1), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo2 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(2), RK817_LDO_SLP_VSEL(2), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(2), RK817_LDO_SLP_VSEL(2), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo3 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(3), RK817_LDO_SLP_VSEL(3), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(3), RK817_LDO_SLP_VSEL(3), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo4 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(4), RK817_LDO_SLP_VSEL(4), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(4), RK817_LDO_SLP_VSEL(4), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo5 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(5), RK817_LDO_SLP_VSEL(5), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(5), RK817_LDO_SLP_VSEL(5), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo6 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(6), RK817_LDO_SLP_VSEL(6), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(6), RK817_LDO_SLP_VSEL(6), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo7 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(7), RK817_LDO_SLP_VSEL(7), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(7), RK817_LDO_SLP_VSEL(7), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo8 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(8), RK817_LDO_SLP_VSEL(8), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(8), RK817_LDO_SLP_VSEL(8), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
/* ldo9 */
|
|
{ 600000, 25000, RK817_LDO_ON_VSEL(9), RK817_LDO_SLP_VSEL(9), NA, RK817_LDO_VSEL_MASK, 0x00, },
|
|
{ 3400000, 0, RK817_LDO_ON_VSEL(9), RK817_LDO_SLP_VSEL(9), NA, RK817_LDO_VSEL_MASK, 0x70, },
|
|
};
|
|
|
|
static const struct rk8xx_reg_info rk818_ldo[] = {
|
|
{ 1800000, 100000, REG_LDO1_ON_VSEL, REG_LDO1_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO2_ON_VSEL, REG_LDO2_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO3_ON_VSEL, REG_LDO3_SLP_VSEL, NA, RK818_LDO3_ON_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO4_ON_VSEL, REG_LDO4_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO5_ON_VSEL, REG_LDO5_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO6_ON_VSEL, REG_LDO6_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 800000, 100000, REG_LDO7_ON_VSEL, REG_LDO7_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
{ 1800000, 100000, REG_LDO8_ON_VSEL, REG_LDO8_SLP_VSEL, NA, RK818_LDO_VSEL_MASK, },
|
|
};
|
|
#endif
|
|
|
|
static const u16 rk818_chrg_cur_input_array[] = {
|
|
450, 800, 850, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000
|
|
};
|
|
|
|
static const uint rk818_chrg_shutdown_vsel_array[] = {
|
|
2780000, 2850000, 2920000, 2990000, 3060000, 3130000, 3190000, 3260000
|
|
};
|
|
|
|
static const struct rk8xx_reg_info *get_buck_reg(struct udevice *pmic,
|
|
int num, int uvolt)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
switch (num) {
|
|
case 0:
|
|
case 1:
|
|
if (uvolt <= 1450000)
|
|
return &rk816_buck[num * 3 + 0];
|
|
else if (uvolt <= 2200000)
|
|
return &rk816_buck[num * 3 + 1];
|
|
else
|
|
return &rk816_buck[num * 3 + 2];
|
|
default:
|
|
return &rk816_buck[num + 4];
|
|
}
|
|
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
switch (num) {
|
|
case 0 ... 2:
|
|
if (uvolt < 1500000)
|
|
return &rk817_buck[num * 3 + 0];
|
|
else if (uvolt < 2400000)
|
|
return &rk817_buck[num * 3 + 1];
|
|
else
|
|
return &rk817_buck[num * 3 + 2];
|
|
case 3:
|
|
if (uvolt < 1500000)
|
|
return &rk817_buck[num * 3 + 0];
|
|
else if (uvolt < 3400000)
|
|
return &rk817_buck[num * 3 + 1];
|
|
else
|
|
return &rk817_buck[num * 3 + 2];
|
|
/* BUCK5 for RK809 */
|
|
default:
|
|
if (uvolt < 1800000)
|
|
return &rk809_buck5[0];
|
|
else if (uvolt < 2800000)
|
|
return &rk809_buck5[1];
|
|
else if (uvolt < 3300000)
|
|
return &rk809_buck5[2];
|
|
else
|
|
return &rk809_buck5[3];
|
|
}
|
|
case RK818_ID:
|
|
return &rk818_buck[num];
|
|
default:
|
|
return &rk808_buck[num];
|
|
}
|
|
}
|
|
|
|
static int _buck_set_value(struct udevice *pmic, int buck, int uvolt)
|
|
{
|
|
const struct rk8xx_reg_info *info = get_buck_reg(pmic, buck, uvolt);
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
int mask = info->vsel_mask;
|
|
int val;
|
|
|
|
if (info->vsel_reg == NA)
|
|
return -ENOSYS;
|
|
|
|
if (info->step_uv == 0) /* Fixed voltage */
|
|
val = info->min_sel;
|
|
else
|
|
val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel;
|
|
|
|
debug("%s: volt=%d, buck=%d, reg=0x%x, mask=0x%x, val=0x%x\n",
|
|
__func__, uvolt, buck + 1, info->vsel_reg, mask, val);
|
|
|
|
if (priv->variant == RK816_ID) {
|
|
pmic_clrsetbits(pmic, info->vsel_reg, mask, val);
|
|
return pmic_clrsetbits(pmic, RK816_REG_DCDC_EN2,
|
|
1 << 7, 1 << 7);
|
|
} else {
|
|
return pmic_clrsetbits(pmic, info->vsel_reg, mask, val);
|
|
}
|
|
}
|
|
|
|
static int _buck_set_enable(struct udevice *pmic, int buck, bool enable)
|
|
{
|
|
uint mask, value, en_reg;
|
|
int ret = 0;
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
if (buck >= 4) {
|
|
buck -= 4;
|
|
en_reg = RK816_REG_DCDC_EN2;
|
|
} else {
|
|
en_reg = RK816_REG_DCDC_EN1;
|
|
}
|
|
if (enable)
|
|
value = ((1 << buck) | (1 << (buck + 4)));
|
|
else
|
|
value = ((0 << buck) | (1 << (buck + 4)));
|
|
ret = pmic_reg_write(pmic, en_reg, value);
|
|
break;
|
|
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << buck;
|
|
if (enable) {
|
|
ret = pmic_clrsetbits(pmic, REG_DCDC_ILMAX,
|
|
0, 3 << (buck * 2));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
ret = pmic_clrsetbits(pmic, REG_DCDC_EN, mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (buck < 4) {
|
|
if (enable)
|
|
value = ((1 << buck) | (1 << (buck + 4)));
|
|
else
|
|
value = ((0 << buck) | (1 << (buck + 4)));
|
|
ret = pmic_reg_write(pmic, RK817_POWER_EN(0), value);
|
|
/* BUCK5 for RK809 */
|
|
} else {
|
|
if (enable)
|
|
value = ((1 << 1) | (1 << 5));
|
|
else
|
|
value = ((0 << 1) | (1 << 5));
|
|
ret = pmic_reg_write(pmic, RK817_POWER_EN(3), value);
|
|
}
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef ENABLE_DRIVER
|
|
static int _buck_set_suspend_value(struct udevice *pmic, int buck, int uvolt)
|
|
{
|
|
const struct rk8xx_reg_info *info = get_buck_reg(pmic, buck, uvolt);
|
|
int mask = info->vsel_mask;
|
|
int val;
|
|
|
|
if (info->vsel_sleep_reg == NA)
|
|
return -ENOSYS;
|
|
|
|
if (info->step_uv == 0)
|
|
val = info->min_sel;
|
|
else
|
|
val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel;
|
|
|
|
debug("%s: volt=%d, buck=%d, reg=0x%x, mask=0x%x, val=0x%x\n",
|
|
__func__, uvolt, buck + 1, info->vsel_sleep_reg, mask, val);
|
|
|
|
return pmic_clrsetbits(pmic, info->vsel_sleep_reg, mask, val);
|
|
}
|
|
|
|
static int _buck_get_enable(struct udevice *pmic, int buck)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
uint mask = 0;
|
|
int ret = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
if (buck >= 4) {
|
|
mask = 1 << (buck - 4);
|
|
ret = pmic_reg_read(pmic, RK816_REG_DCDC_EN2);
|
|
} else {
|
|
mask = 1 << buck;
|
|
ret = pmic_reg_read(pmic, RK816_REG_DCDC_EN1);
|
|
}
|
|
break;
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << buck;
|
|
ret = pmic_reg_read(pmic, REG_DCDC_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (buck < 4) {
|
|
mask = 1 << buck;
|
|
ret = pmic_reg_read(pmic, RK817_POWER_EN(0));
|
|
/* BUCK5 for RK809 */
|
|
} else {
|
|
mask = 1 << 1;
|
|
ret = pmic_reg_read(pmic, RK817_POWER_EN(3));
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret & mask ? true : false;
|
|
}
|
|
|
|
static int _buck_set_suspend_enable(struct udevice *pmic, int buck, bool enable)
|
|
{
|
|
uint mask = 0;
|
|
int ret;
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
mask = 1 << buck;
|
|
ret = pmic_clrsetbits(pmic, RK816_REG_DCDC_SLP_EN, mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << buck;
|
|
ret = pmic_clrsetbits(pmic, REG_SLEEP_SET_OFF1, mask,
|
|
enable ? 0 : mask);
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (buck < 4)
|
|
mask = 1 << buck;
|
|
else
|
|
mask = 1 << 5; /* BUCK5 for RK809 */
|
|
ret = pmic_clrsetbits(pmic, RK817_POWER_SLP_EN(0), mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _buck_get_suspend_enable(struct udevice *pmic, int buck)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
int ret, val;
|
|
uint mask = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
mask = 1 << buck;
|
|
val = pmic_reg_read(pmic, RK816_REG_DCDC_SLP_EN);
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 1 : 0;
|
|
break;
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << buck;
|
|
val = pmic_reg_read(pmic, REG_SLEEP_SET_OFF1);
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 0 : 1;
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (buck < 4)
|
|
mask = 1 << buck;
|
|
else
|
|
mask = 1 << 5; /* BUCK5 for RK809 */
|
|
|
|
val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(0));
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 1 : 0;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct rk8xx_reg_info *get_ldo_reg(struct udevice *pmic,
|
|
int num, int uvolt)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
return &rk816_ldo[num];
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (uvolt < 3400000)
|
|
return &rk817_ldo[num * 2 + 0];
|
|
else
|
|
return &rk817_ldo[num * 2 + 1];
|
|
case RK818_ID:
|
|
return &rk818_ldo[num];
|
|
default:
|
|
return &rk808_ldo[num];
|
|
}
|
|
}
|
|
|
|
static int _ldo_get_enable(struct udevice *pmic, int ldo)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
uint mask = 0;
|
|
int ret = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
if (ldo >= 4) {
|
|
mask = 1 << (ldo - 4);
|
|
ret = pmic_reg_read(pmic, RK816_REG_LDO_EN2);
|
|
} else {
|
|
mask = 1 << ldo;
|
|
ret = pmic_reg_read(pmic, RK816_REG_LDO_EN1);
|
|
}
|
|
break;
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << ldo;
|
|
ret = pmic_reg_read(pmic, REG_LDO_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (ldo < 4) {
|
|
mask = 1 << ldo;
|
|
ret = pmic_reg_read(pmic, RK817_POWER_EN(1));
|
|
} else if (ldo < 8) {
|
|
mask = 1 << (ldo - 4);
|
|
ret = pmic_reg_read(pmic, RK817_POWER_EN(2));
|
|
} else if (ldo == 8) {
|
|
mask = 1 << 0;
|
|
ret = pmic_reg_read(pmic, RK817_POWER_EN(3));
|
|
} else {
|
|
return false;
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret & mask ? true : false;
|
|
}
|
|
|
|
static int _ldo_set_enable(struct udevice *pmic, int ldo, bool enable)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
uint mask, value, en_reg;
|
|
int ret = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
if (ldo >= 4) {
|
|
ldo -= 4;
|
|
en_reg = RK816_REG_LDO_EN2;
|
|
} else {
|
|
en_reg = RK816_REG_LDO_EN1;
|
|
}
|
|
if (enable)
|
|
value = ((1 << ldo) | (1 << (ldo + 4)));
|
|
else
|
|
value = ((0 << ldo) | (1 << (ldo + 4)));
|
|
|
|
ret = pmic_reg_write(pmic, en_reg, value);
|
|
break;
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << ldo;
|
|
ret = pmic_clrsetbits(pmic, REG_LDO_EN, mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (ldo < 4) {
|
|
en_reg = RK817_POWER_EN(1);
|
|
} else if (ldo < 8) {
|
|
ldo -= 4;
|
|
en_reg = RK817_POWER_EN(2);
|
|
} else if (ldo == 8) {
|
|
ldo = 0; /* BIT 0 */
|
|
en_reg = RK817_POWER_EN(3);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
if (enable)
|
|
value = ((1 << ldo) | (1 << (ldo + 4)));
|
|
else
|
|
value = ((0 << ldo) | (1 << (ldo + 4)));
|
|
ret = pmic_reg_write(pmic, en_reg, value);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _ldo_set_suspend_enable(struct udevice *pmic, int ldo, bool enable)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
uint mask;
|
|
int ret = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
mask = 1 << ldo;
|
|
ret = pmic_clrsetbits(pmic, RK816_REG_LDO_SLP_EN, mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << ldo;
|
|
ret = pmic_clrsetbits(pmic, REG_SLEEP_SET_OFF2, mask,
|
|
enable ? 0 : mask);
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (ldo == 8) {
|
|
mask = 1 << 4; /* LDO9 */
|
|
ret = pmic_clrsetbits(pmic, RK817_POWER_SLP_EN(0), mask,
|
|
enable ? mask : 0);
|
|
} else {
|
|
mask = 1 << ldo;
|
|
ret = pmic_clrsetbits(pmic, RK817_POWER_SLP_EN(1), mask,
|
|
enable ? mask : 0);
|
|
}
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _ldo_get_suspend_enable(struct udevice *pmic, int ldo)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(pmic);
|
|
int val, ret = 0;
|
|
uint mask;
|
|
|
|
switch (priv->variant) {
|
|
case RK805_ID:
|
|
case RK816_ID:
|
|
mask = 1 << ldo;
|
|
val = pmic_reg_read(pmic, RK816_REG_LDO_SLP_EN);
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 1 : 0;
|
|
break;
|
|
case RK808_ID:
|
|
case RK818_ID:
|
|
mask = 1 << ldo;
|
|
val = pmic_reg_read(pmic, REG_SLEEP_SET_OFF2);
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 0 : 1;
|
|
break;
|
|
case RK809_ID:
|
|
case RK817_ID:
|
|
if (ldo == 8) {
|
|
mask = 1 << 4; /* LDO9 */
|
|
val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(0));
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 1 : 0;
|
|
} else {
|
|
mask = 1 << ldo;
|
|
val = pmic_reg_read(pmic, RK817_POWER_SLP_EN(1));
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 1 : 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int buck_get_value(struct udevice *dev)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
/* We assume level-1 voltage is enough for usage in U-Boot */
|
|
const struct rk8xx_reg_info *info = get_buck_reg(dev->parent, buck, 0);
|
|
int mask = info->vsel_mask;
|
|
int ret, val;
|
|
|
|
if (info->vsel_reg == NA)
|
|
return -ENOSYS;
|
|
|
|
ret = pmic_reg_read(dev->parent, info->vsel_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
val = ret & mask;
|
|
|
|
return info->min_uv + val * info->step_uv;
|
|
}
|
|
|
|
static int buck_set_value(struct udevice *dev, int uvolt)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
|
|
return _buck_set_value(dev->parent, buck, uvolt);
|
|
}
|
|
|
|
static int buck_get_suspend_value(struct udevice *dev)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
/* We assume level-1 voltage is enough for usage in U-Boot */
|
|
const struct rk8xx_reg_info *info = get_buck_reg(dev->parent, buck, 0);
|
|
int mask = info->vsel_mask;
|
|
int ret, val;
|
|
|
|
if (info->vsel_sleep_reg == NA)
|
|
return -ENOSYS;
|
|
|
|
ret = pmic_reg_read(dev->parent, info->vsel_sleep_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = ret & mask;
|
|
|
|
return info->min_uv + val * info->step_uv;
|
|
}
|
|
|
|
static int buck_set_suspend_value(struct udevice *dev, int uvolt)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
|
|
return _buck_set_suspend_value(dev->parent, buck, uvolt);
|
|
}
|
|
|
|
static int buck_set_enable(struct udevice *dev, bool enable)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
|
|
return _buck_set_enable(dev->parent, buck, enable);
|
|
}
|
|
|
|
static int buck_set_suspend_enable(struct udevice *dev, bool enable)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
|
|
return _buck_set_suspend_enable(dev->parent, buck, enable);
|
|
}
|
|
|
|
static int buck_get_suspend_enable(struct udevice *dev)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
|
|
return _buck_get_suspend_enable(dev->parent, buck);
|
|
}
|
|
|
|
static int buck_get_enable(struct udevice *dev)
|
|
{
|
|
int buck = dev->driver_data - 1;
|
|
|
|
return _buck_get_enable(dev->parent, buck);
|
|
}
|
|
|
|
static int ldo_get_value(struct udevice *dev)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, 0);
|
|
int mask = info->vsel_mask;
|
|
int ret, val;
|
|
|
|
if (info->vsel_reg == NA)
|
|
return -ENOSYS;
|
|
ret = pmic_reg_read(dev->parent, info->vsel_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
val = ret & mask;
|
|
|
|
return info->min_uv + val * info->step_uv;
|
|
}
|
|
|
|
static int ldo_set_value(struct udevice *dev, int uvolt)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, uvolt);
|
|
int mask = info->vsel_mask;
|
|
int val;
|
|
|
|
if (info->vsel_reg == NA)
|
|
return -ENOSYS;
|
|
|
|
if (info->step_uv == 0)
|
|
val = info->min_sel;
|
|
else
|
|
val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel;
|
|
|
|
debug("%s: volt=%d, ldo=%d, reg=0x%x, mask=0x%x, val=0x%x\n",
|
|
__func__, uvolt, ldo + 1, info->vsel_reg, mask, val);
|
|
|
|
return pmic_clrsetbits(dev->parent, info->vsel_reg, mask, val);
|
|
}
|
|
|
|
static int ldo_set_suspend_value(struct udevice *dev, int uvolt)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, uvolt);
|
|
int mask = info->vsel_mask;
|
|
int val;
|
|
|
|
if (info->vsel_sleep_reg == NA)
|
|
return -ENOSYS;
|
|
|
|
if (info->step_uv == 0)
|
|
val = info->min_sel;
|
|
else
|
|
val = ((uvolt - info->min_uv) / info->step_uv) + info->min_sel;
|
|
|
|
debug("%s: volt=%d, ldo=%d, reg=0x%x, mask=0x%x, val=0x%x\n",
|
|
__func__, uvolt, ldo + 1, info->vsel_sleep_reg, mask, val);
|
|
|
|
return pmic_clrsetbits(dev->parent, info->vsel_sleep_reg, mask, val);
|
|
}
|
|
|
|
static int ldo_get_suspend_value(struct udevice *dev)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
const struct rk8xx_reg_info *info = get_ldo_reg(dev->parent, ldo, 0);
|
|
int mask = info->vsel_mask;
|
|
int val, ret;
|
|
|
|
if (info->vsel_sleep_reg == NA)
|
|
return -ENOSYS;
|
|
|
|
ret = pmic_reg_read(dev->parent, info->vsel_sleep_reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = ret & mask;
|
|
|
|
return info->min_uv + val * info->step_uv;
|
|
}
|
|
|
|
static int ldo_set_enable(struct udevice *dev, bool enable)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
|
|
return _ldo_set_enable(dev->parent, ldo, enable);
|
|
}
|
|
|
|
static int ldo_set_suspend_enable(struct udevice *dev, bool enable)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
|
|
return _ldo_set_suspend_enable(dev->parent, ldo, enable);
|
|
}
|
|
|
|
static int ldo_get_suspend_enable(struct udevice *dev)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
|
|
return _ldo_get_suspend_enable(dev->parent, ldo);
|
|
}
|
|
|
|
static int ldo_get_enable(struct udevice *dev)
|
|
{
|
|
int ldo = dev->driver_data - 1;
|
|
|
|
return _ldo_get_enable(dev->parent, ldo);
|
|
}
|
|
|
|
static int switch_set_enable(struct udevice *dev, bool enable)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(dev->parent);
|
|
int ret = 0, sw = dev->driver_data - 1;
|
|
uint mask = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK808_ID:
|
|
mask = 1 << (sw + 5);
|
|
ret = pmic_clrsetbits(dev->parent, REG_DCDC_EN, mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
case RK809_ID:
|
|
mask = (1 << (sw + 2)) | (1 << (sw + 6));
|
|
ret = pmic_clrsetbits(dev->parent, RK817_POWER_EN(3), mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
case RK818_ID:
|
|
mask = 1 << 6;
|
|
ret = pmic_clrsetbits(dev->parent, REG_DCDC_EN, mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
}
|
|
|
|
debug("%s: switch%d, enable=%d, mask=0x%x\n",
|
|
__func__, sw + 1, enable, mask);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int switch_get_enable(struct udevice *dev)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(dev->parent);
|
|
int ret = 0, sw = dev->driver_data - 1;
|
|
uint mask = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK808_ID:
|
|
mask = 1 << (sw + 5);
|
|
ret = pmic_reg_read(dev->parent, REG_DCDC_EN);
|
|
break;
|
|
case RK809_ID:
|
|
mask = 1 << (sw + 2);
|
|
ret = pmic_reg_read(dev->parent, RK817_POWER_EN(3));
|
|
break;
|
|
case RK818_ID:
|
|
mask = 1 << 6;
|
|
ret = pmic_reg_read(dev->parent, REG_DCDC_EN);
|
|
break;
|
|
}
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret & mask ? true : false;
|
|
}
|
|
|
|
static int switch_set_suspend_value(struct udevice *dev, int uvolt)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int switch_get_suspend_value(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int switch_set_suspend_enable(struct udevice *dev, bool enable)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(dev->parent);
|
|
int ret = 0, sw = dev->driver_data - 1;
|
|
uint mask = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK808_ID:
|
|
mask = 1 << (sw + 5);
|
|
ret = pmic_clrsetbits(dev->parent, REG_SLEEP_SET_OFF1, mask,
|
|
enable ? 0 : mask);
|
|
break;
|
|
case RK809_ID:
|
|
mask = 1 << (sw + 6);
|
|
ret = pmic_clrsetbits(dev->parent, RK817_POWER_SLP_EN(0), mask,
|
|
enable ? mask : 0);
|
|
break;
|
|
case RK818_ID:
|
|
mask = 1 << 6;
|
|
ret = pmic_clrsetbits(dev->parent, REG_SLEEP_SET_OFF1, mask,
|
|
enable ? 0 : mask);
|
|
break;
|
|
}
|
|
|
|
debug("%s: switch%d, enable=%d, mask=0x%x\n",
|
|
__func__, sw + 1, enable, mask);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int switch_get_suspend_enable(struct udevice *dev)
|
|
{
|
|
struct rk8xx_priv *priv = dev_get_priv(dev->parent);
|
|
int val, ret = 0, sw = dev->driver_data - 1;
|
|
uint mask = 0;
|
|
|
|
switch (priv->variant) {
|
|
case RK808_ID:
|
|
mask = 1 << (sw + 5);
|
|
val = pmic_reg_read(dev->parent, REG_SLEEP_SET_OFF1);
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 0 : 1;
|
|
break;
|
|
case RK809_ID:
|
|
mask = 1 << (sw + 6);
|
|
val = pmic_reg_read(dev->parent, RK817_POWER_SLP_EN(0));
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 1 : 0;
|
|
break;
|
|
case RK818_ID:
|
|
mask = 1 << 6;
|
|
val = pmic_reg_read(dev->parent, REG_SLEEP_SET_OFF1);
|
|
if (val < 0)
|
|
return val;
|
|
ret = val & mask ? 0 : 1;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* RK8xx switch does not need to set the voltage,
|
|
* but if dts set regulator-min-microvolt/regulator-max-microvolt,
|
|
* will cause regulator set value fail and not to enable this switch.
|
|
* So add an empty function to return success.
|
|
*/
|
|
static int switch_get_value(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int switch_set_value(struct udevice *dev, int uvolt)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int rk8xx_buck_probe(struct udevice *dev)
|
|
{
|
|
struct dm_regulator_uclass_plat *uc_pdata;
|
|
|
|
uc_pdata = dev_get_uclass_plat(dev);
|
|
|
|
uc_pdata->type = REGULATOR_TYPE_BUCK;
|
|
uc_pdata->mode_count = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk8xx_ldo_probe(struct udevice *dev)
|
|
{
|
|
struct dm_regulator_uclass_plat *uc_pdata;
|
|
|
|
uc_pdata = dev_get_uclass_plat(dev);
|
|
|
|
uc_pdata->type = REGULATOR_TYPE_LDO;
|
|
uc_pdata->mode_count = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk8xx_switch_probe(struct udevice *dev)
|
|
{
|
|
struct dm_regulator_uclass_plat *uc_pdata;
|
|
|
|
uc_pdata = dev_get_uclass_plat(dev);
|
|
|
|
uc_pdata->type = REGULATOR_TYPE_FIXED;
|
|
uc_pdata->mode_count = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_regulator_ops rk8xx_buck_ops = {
|
|
.get_value = buck_get_value,
|
|
.set_value = buck_set_value,
|
|
.set_suspend_value = buck_set_suspend_value,
|
|
.get_suspend_value = buck_get_suspend_value,
|
|
.get_enable = buck_get_enable,
|
|
.set_enable = buck_set_enable,
|
|
.set_suspend_enable = buck_set_suspend_enable,
|
|
.get_suspend_enable = buck_get_suspend_enable,
|
|
};
|
|
|
|
static const struct dm_regulator_ops rk8xx_ldo_ops = {
|
|
.get_value = ldo_get_value,
|
|
.set_value = ldo_set_value,
|
|
.set_suspend_value = ldo_set_suspend_value,
|
|
.get_suspend_value = ldo_get_suspend_value,
|
|
.get_enable = ldo_get_enable,
|
|
.set_enable = ldo_set_enable,
|
|
.set_suspend_enable = ldo_set_suspend_enable,
|
|
.get_suspend_enable = ldo_get_suspend_enable,
|
|
};
|
|
|
|
static const struct dm_regulator_ops rk8xx_switch_ops = {
|
|
.get_value = switch_get_value,
|
|
.set_value = switch_set_value,
|
|
.get_enable = switch_get_enable,
|
|
.set_enable = switch_set_enable,
|
|
.set_suspend_enable = switch_set_suspend_enable,
|
|
.get_suspend_enable = switch_get_suspend_enable,
|
|
.set_suspend_value = switch_set_suspend_value,
|
|
.get_suspend_value = switch_get_suspend_value,
|
|
};
|
|
|
|
U_BOOT_DRIVER(rk8xx_buck) = {
|
|
.name = "rk8xx_buck",
|
|
.id = UCLASS_REGULATOR,
|
|
.ops = &rk8xx_buck_ops,
|
|
.probe = rk8xx_buck_probe,
|
|
};
|
|
|
|
U_BOOT_DRIVER(rk8xx_ldo) = {
|
|
.name = "rk8xx_ldo",
|
|
.id = UCLASS_REGULATOR,
|
|
.ops = &rk8xx_ldo_ops,
|
|
.probe = rk8xx_ldo_probe,
|
|
};
|
|
|
|
U_BOOT_DRIVER(rk8xx_switch) = {
|
|
.name = "rk8xx_switch",
|
|
.id = UCLASS_REGULATOR,
|
|
.ops = &rk8xx_switch_ops,
|
|
.probe = rk8xx_switch_probe,
|
|
};
|
|
#endif
|
|
|
|
int rk8xx_spl_configure_buck(struct udevice *pmic, int buck, int uvolt)
|
|
{
|
|
int ret;
|
|
|
|
ret = _buck_set_value(pmic, buck, uvolt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return _buck_set_enable(pmic, buck, true);
|
|
}
|
|
|
|
int rk818_spl_configure_usb_input_current(struct udevice *pmic, int current_ma)
|
|
{
|
|
uint i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rk818_chrg_cur_input_array); i++)
|
|
if (current_ma <= rk818_chrg_cur_input_array[i])
|
|
break;
|
|
|
|
return pmic_clrsetbits(pmic, REG_USB_CTRL, RK818_USB_ILIM_SEL_MASK, i);
|
|
}
|
|
|
|
int rk818_spl_configure_usb_chrg_shutdown(struct udevice *pmic, int uvolt)
|
|
{
|
|
uint i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rk818_chrg_shutdown_vsel_array); i++)
|
|
if (uvolt <= rk818_chrg_shutdown_vsel_array[i])
|
|
break;
|
|
|
|
return pmic_clrsetbits(pmic, REG_USB_CTRL, RK818_USB_CHG_SD_VSEL_MASK,
|
|
i);
|
|
}
|