u-boot/drivers/core/of_extra.c
Vladimir Oltean 2dd6acb795 net: introduce a helper to determine whether to use in-band autoneg
Certain serial SERDES protocols like 1000base-x, 2500base-x, SGMII,
USXGMII can operate either in a mode where the PHY (be it on-board or
inside an SFP module) passes the link parameters (speed, duplex, pause)
to the MAC through in-band through control words standardized by IEEE
802.3 clause 37, or in a mode where the MAC must configure (force) its
link parameters based on information obtained out-of-band (MDIO reads,
guesswork etc).

In Linux, the OF node property named "managed" is parsed by the phylink
framework, and the convention is that if a driver uses phylink, then the
presence of this property means that in-band autoneg should be enabled,
otherwise it shouldn't.

To be compatible with the OF node bindings of drivers that use phylink
in Linux, introduce parsing support for this property in U-Boot too.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-23 09:57:55 +02:00

170 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2017 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*/
#include <common.h>
#include <log.h>
#include <linux/libfdt.h>
#include <dm/of_access.h>
#include <dm/of_extra.h>
#include <dm/ofnode.h>
int ofnode_read_fmap_entry(ofnode node, struct fmap_entry *entry)
{
const char *prop;
ofnode subnode;
if (ofnode_read_u32(node, "image-pos", &entry->offset)) {
debug("Node '%s' has bad/missing 'image-pos' property\n",
ofnode_get_name(node));
return log_msg_ret("image-pos", -ENOENT);
}
if (ofnode_read_u32(node, "size", &entry->length)) {
debug("Node '%s' has bad/missing 'size' property\n",
ofnode_get_name(node));
return log_msg_ret("size", -ENOENT);
}
entry->used = ofnode_read_s32_default(node, "used", entry->length);
prop = ofnode_read_string(node, "compress");
if (prop) {
if (!strcmp(prop, "lz4"))
entry->compress_algo = FMAP_COMPRESS_LZ4;
else if (!strcmp(prop, "lzma"))
entry->compress_algo = FMAP_COMPRESS_LZMA;
else
return log_msg_ret("compression algo", -EINVAL);
} else {
entry->compress_algo = FMAP_COMPRESS_NONE;
}
entry->unc_length = ofnode_read_s32_default(node, "uncomp-size",
entry->length);
subnode = ofnode_find_subnode(node, "hash");
if (ofnode_valid(subnode)) {
prop = ofnode_read_prop(subnode, "value", &entry->hash_size);
/* Assume it is sha256 */
entry->hash_algo = prop ? FMAP_HASH_SHA256 : FMAP_HASH_NONE;
entry->hash = (uint8_t *)prop;
}
return 0;
}
int ofnode_decode_region(ofnode node, const char *prop_name, fdt_addr_t *basep,
fdt_size_t *sizep)
{
const fdt_addr_t *cell;
int len;
debug("%s: %s: %s\n", __func__, ofnode_get_name(node), prop_name);
cell = ofnode_get_property(node, prop_name, &len);
if (!cell || (len < sizeof(fdt_addr_t) * 2)) {
debug("cell=%p, len=%d\n", cell, len);
return -1;
}
*basep = fdt_addr_to_cpu(*cell);
*sizep = fdt_size_to_cpu(cell[1]);
debug("%s: base=%08lx, size=%lx\n", __func__, (ulong)*basep,
(ulong)*sizep);
return 0;
}
int ofnode_decode_memory_region(ofnode config_node, const char *mem_type,
const char *suffix, fdt_addr_t *basep,
fdt_size_t *sizep)
{
char prop_name[50];
const char *mem;
fdt_size_t size, offset_size;
fdt_addr_t base, offset;
ofnode node;
if (!ofnode_valid(config_node)) {
config_node = ofnode_path("/config");
if (!ofnode_valid(config_node)) {
debug("%s: Cannot find /config node\n", __func__);
return -ENOENT;
}
}
if (!suffix)
suffix = "";
snprintf(prop_name, sizeof(prop_name), "%s-memory%s", mem_type,
suffix);
mem = ofnode_read_string(config_node, prop_name);
if (!mem) {
debug("%s: No memory type for '%s', using /memory\n", __func__,
prop_name);
mem = "/memory";
}
node = ofnode_path(mem);
if (!ofnode_valid(node)) {
debug("%s: Failed to find node '%s'\n", __func__, mem);
return -ENOENT;
}
/*
* Not strictly correct - the memory may have multiple banks. We just
* use the first
*/
if (ofnode_decode_region(node, "reg", &base, &size)) {
debug("%s: Failed to decode memory region %s\n", __func__,
mem);
return -EINVAL;
}
snprintf(prop_name, sizeof(prop_name), "%s-offset%s", mem_type,
suffix);
if (ofnode_decode_region(config_node, prop_name, &offset,
&offset_size)) {
debug("%s: Failed to decode memory region '%s'\n", __func__,
prop_name);
return -EINVAL;
}
*basep = base + offset;
*sizep = offset_size;
return 0;
}
bool ofnode_phy_is_fixed_link(ofnode eth_node, ofnode *phy_node)
{
ofnode node, subnode;
int len;
subnode = ofnode_find_subnode(eth_node, "fixed-link");
if (ofnode_valid(subnode)) {
/* new binding */
node = subnode;
} else if (ofnode_get_property(eth_node, "fixed-link", &len) &&
len == (5 * sizeof(__be32))) {
/* old binding */
node = eth_node;
} else {
return false;
}
if (phy_node)
*phy_node = node;
return true;
}
bool ofnode_eth_uses_inband_aneg(ofnode eth_node)
{
bool inband_aneg = false;
const char *managed;
managed = ofnode_read_string(eth_node, "managed");
if (managed && !strcmp(managed, "in-band-status"))
inband_aneg = true;
return inband_aneg;
}