872413bb0a
All uniphier v7 SoCs have cortex-a9 and use cortex-a9 global timer
in a simple implementation. Now DM_TIMER of it is available
on 35751c7f3f ("timer: sti: convert sti-timer to arm a9 global timer"),
so let's switch to it.
The old driver reads the lower 32bits of counter field
and sets the prescaler as 50 with PERIPHCLK(=50MHz),
so the global timer works as a 32-bit 1MHz timer.
The DM_TIMER uses the whole 64bits with no prescaler,
so the global timer works as a 64-bit PERIPHCLK timer.
CONFIG_SYS_HZ_CLOCK is set as the default PERIPHCLK frequency,
if there is no 'clocks' property in devicetree.
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
85 lines
2.3 KiB
Plaintext
85 lines
2.3 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_UNIPHIER=y
|
|
CONFIG_TEXT_BASE=0x84000000
|
|
CONFIG_NR_DRAM_BANKS=3
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld4-ref"
|
|
CONFIG_SPL_TEXT_BASE=0x00040000
|
|
CONFIG_SPL_MMC=y
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL=y
|
|
CONFIG_MICRO_SUPPORT_CARD=y
|
|
CONFIG_SYS_LOAD_ADDR=0x85000000
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x84000000
|
|
CONFIG_SYS_MONITOR_LEN=2097152
|
|
CONFIG_TIMER=y
|
|
CONFIG_SPL_TIMER=y
|
|
CONFIG_TIMESTAMP=y
|
|
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
|
|
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
|
|
CONFIG_USE_PREBOOT=y
|
|
CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
|
|
CONFIG_LOGLEVEL=6
|
|
CONFIG_SPL_MAX_SIZE=0x10000
|
|
CONFIG_SPL_PAD_TO=0x20000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x2000
|
|
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
|
CONFIG_SPL_STACK=0x100000
|
|
CONFIG_SPL_NAND_SUPPORT=y
|
|
CONFIG_SPL_NOR_SUPPORT=y
|
|
CONFIG_SPL_TARGET="u-boot-with-spl.bin"
|
|
CONFIG_CMD_CONFIG=y
|
|
CONFIG_SYS_BOOTM_LEN=0x2000000
|
|
# CONFIG_CMD_XIMG is not set
|
|
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_TFTPPUT=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_TIME=y
|
|
# CONFIG_CMD_SLEEP is not set
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
|
|
CONFIG_CMD_UBI=y
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_USE_BOOTFILE=y
|
|
CONFIG_BOOTFILE="zImage"
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_USE_GATEWAYIP=y
|
|
CONFIG_GATEWAYIP="192.168.11.1"
|
|
CONFIG_USE_IPADDR=y
|
|
CONFIG_IPADDR="192.168.11.10"
|
|
CONFIG_USE_NETMASK=y
|
|
CONFIG_NETMASK="255.255.255.0"
|
|
CONFIG_USE_ROOTPATH=y
|
|
CONFIG_ROOTPATH="/nfs/root/path"
|
|
CONFIG_USE_SERVERIP=y
|
|
CONFIG_SERVERIP="192.168.11.1"
|
|
CONFIG_GPIO_UNIPHIER=y
|
|
CONFIG_MISC=y
|
|
CONFIG_I2C_EEPROM=y
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_MMC_UNIPHIER=y
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_NAND_DENALI_DT=y
|
|
CONFIG_SYS_NAND_ONFI_DETECTION=y
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
|
|
CONFIG_SPL_NAND_DENALI=y
|
|
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
|
|
CONFIG_SMC911X=y
|
|
CONFIG_SMC911X_32_BIT=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_EHCI_GENERIC=y
|
|
CONFIG_PANIC_HANG=y
|
|
CONFIG_FDT_FIXUP_PARTITIONS=y
|