u-boot/configs/M5329BFEE_defconfig
Tom Rini 54f80dd290 Convert CONFIG_HOSTNAME et al to Kconfig
This converts the following to Kconfig:
   CONFIG_GATEWAYIP
   CONFIG_HOSTNAME
   CONFIG_IPADDR
   CONFIG_NETMASK
   CONFIG_ROOTPATH
   CONFIG_SERVERIP
   CONFIG_UBOOTPATH

To do this, we introduce a CONFIG_USE_ form of each of the above and
change include/env_default.h to test for that to be set before setting a
value. Further, we don't want to stringify the IP address related values
as they are now properly strings via Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00

65 lines
1.6 KiB
Plaintext

CONFIG_M68K=y
CONFIG_TEXT_BASE=0x0
CONFIG_SYS_MALLOC_LEN=0x20000
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5329BFEE"
CONFIG_SYS_PROMPT="-> "
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_ENV_ADDR=0x4000
CONFIG_TARGET_M5329EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_MONITOR_LEN=262144
CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_MALLOC_BOOTPARAMS=y
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PBSIZE=276
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_MII=y
CONFIG_MII_INIT=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_USE_HOSTNAME=y
CONFIG_HOSTNAME="M5329EVB"
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_UDP_CHECKSUM=y
CONFIG_USE_GATEWAYIP=y
CONFIG_GATEWAYIP="192.162.1.1"
CONFIG_USE_IPADDR=y
CONFIG_IPADDR="192.162.1.2"
CONFIG_USE_NETMASK=y
CONFIG_NETMASK="255.255.255.0"
CONFIG_USE_SERVERIP=y
CONFIG_SERVERIP="192.162.1.1"
CONFIG_SYS_RX_ETH_BUFFER=8
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_FSL=y
CONFIG_SYS_FSL_I2C_OFFSET=0x58000
CONFIG_SYS_I2C_SLAVE=0x7F
CONFIG_SYS_I2C_SPEED=80000
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y
CONFIG_FLASH_SHOW_PROGRESS=0
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_MAX_FLASH_SECT=137
CONFIG_MTD_RAW_NAND=y
CONFIG_MCFFEC=y
CONFIG_SYS_UNIFY_CACHE=y
CONFIG_MII=y
CONFIG_MCFRTC=y
CONFIG_SYS_MCFRTC_BASE=0xFC0A8000
CONFIG_MCFUART=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=5000