u-boot/board/highbank/ahci.c
Simon Glass c05ed00afb common: Drop linux/delay.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00

208 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2012 Calxeda, Inc.
*/
#include <common.h>
#include <ahci.h>
#include <asm/io.h>
#include <linux/delay.h>
#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
#define CPHY_ADDR(base, dev, addr) ((base) | (((addr) & 0x1ff) << 2))
#define CPHY_BASE 0xfff58000
#define CPHY_WIDTH 0x1000
#define CPHY_DTE_XS 5
#define CPHY_MII 31
#define SERDES_CR_CTL 0x80a0
#define SERDES_CR_ADDR 0x80a1
#define SERDES_CR_DATA 0x80a2
#define CR_BUSY 0x0001
#define CR_START 0x0001
#define CR_WR_RDN 0x0002
#define CPHY_TX_INPUT_STS 0x2001
#define CPHY_RX_INPUT_STS 0x2002
#define CPHY_SATA_TX_OVERRIDE_BIT 0x8000
#define CPHY_SATA_RX_OVERRIDE_BIT 0x4000
#define CPHY_TX_INPUT_OVERRIDE 0x2004
#define CPHY_RX_INPUT_OVERRIDE 0x2005
#define SPHY_LANE 0x100
#define SPHY_HALF_RATE 0x0001
#define CPHY_SATA_DPLL_MODE 0x0700
#define CPHY_SATA_DPLL_SHIFT 8
#define CPHY_SATA_TX_ATTEN 0x1c00
#define CPHY_SATA_TX_ATTEN_SHIFT 10
#define HB_SREG_SATA_ATTEN 0xfff3cf24
#define SATA_PORT_BASE 0xffe08000
#define SATA_VERSIONR 0xf8
#define SATA_HB_VERSION 0x3332302a
static u32 __combo_phy_reg_read(u8 phy, u8 dev, u32 addr)
{
u32 data;
writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy);
data = readl(CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr));
return data;
}
static void __combo_phy_reg_write(u8 phy, u8 dev, u32 addr, u32 data)
{
writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy);
writel(data, CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr));
}
static u32 combo_phy_read(u8 phy, u32 addr)
{
u8 dev = CPHY_DTE_XS;
if (phy == 5)
dev = CPHY_MII;
while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
udelay(5);
__combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr);
__combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_START);
while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
udelay(5);
return __combo_phy_reg_read(phy, dev, SERDES_CR_DATA);
}
static void combo_phy_write(u8 phy, u32 addr, u32 data)
{
u8 dev = CPHY_DTE_XS;
if (phy == 5)
dev = CPHY_MII;
while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY)
udelay(5);
__combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr);
__combo_phy_reg_write(phy, dev, SERDES_CR_DATA, data);
__combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_WR_RDN | CR_START);
}
static void cphy_spread_spectrum_override(u8 phy, u8 lane, u32 val)
{
u32 tmp;
tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT;
combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
tmp |= CPHY_SATA_RX_OVERRIDE_BIT;
combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
tmp &= ~CPHY_SATA_DPLL_MODE;
tmp |= (val << CPHY_SATA_DPLL_SHIFT) & CPHY_SATA_DPLL_MODE;
combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
}
static void cphy_tx_attenuation_override(u8 phy, u8 lane)
{
u32 val;
u32 tmp;
u8 shift;
shift = ((phy == 5) ? 4 : lane) * 4;
val = (readl(HB_SREG_SATA_ATTEN) >> shift) & 0xf;
if (val & 0x8)
return;
tmp = combo_phy_read(phy, CPHY_TX_INPUT_STS + lane * SPHY_LANE);
tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT;
combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
tmp |= CPHY_SATA_TX_OVERRIDE_BIT;
combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN;
combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
}
static void cphy_disable_port_overrides(u8 port)
{
u32 tmp;
u8 lane = 0, phy = 0;
if (port == 0)
phy = 5;
else if (port < 5)
lane = port - 1;
else
return;
tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE);
tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT;
combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
tmp = combo_phy_read(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE);
tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT;
combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp);
}
void cphy_disable_overrides(void)
{
int i;
u32 port_map;
port_map = readl(0xffe08000 + HOST_PORTS_IMPL);
for (i = 0; i < 5; i++) {
if (port_map & (1 << i))
cphy_disable_port_overrides(i);
}
}
static void cphy_override_lane(u8 port)
{
u32 tmp, k = 0;
u8 lane = 0, phy = 0;
if (port == 0)
phy = 5;
else if (port < 5)
lane = port - 1;
else
return;
do {
tmp = combo_phy_read(0, CPHY_RX_INPUT_STS +
lane * SPHY_LANE);
} while ((tmp & SPHY_HALF_RATE) && (k++ < 1000));
cphy_spread_spectrum_override(phy, lane, 3);
cphy_tx_attenuation_override(phy, lane);
}
#define WAIT_MS_LINKUP 4
int ahci_link_up(struct ahci_uc_priv *probe_ent, int port)
{
u32 tmp;
int j = 0;
u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio;
u32 is_highbank = readl(SATA_PORT_BASE + SATA_VERSIONR) ==
SATA_HB_VERSION ? 1 : 0;
/* Bring up SATA link.
* SATA link bringup time is usually less than 1 ms; only very
* rarely has it taken between 1-2 ms. Never seen it above 2 ms.
*/
while (j < WAIT_MS_LINKUP) {
if (is_highbank && (j == 0)) {
cphy_disable_port_overrides(port);
writel(0x301, port_mmio + PORT_SCR_CTL);
udelay(1000);
writel(0x300, port_mmio + PORT_SCR_CTL);
udelay(1000);
cphy_override_lane(port);
}
tmp = readl(port_mmio + PORT_SCR_STAT);
if ((tmp & 0xf) == 0x3)
return 0;
udelay(1000);
j++;
if ((j == WAIT_MS_LINKUP) && (tmp & 0xf))
j = 0; /* retry phy reset */
}
return 1;
}