/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2013 Samsung Electronics * Hyungwon Hwang */ #ifndef __CONFIG_ODROID_XU3_H #define __CONFIG_ODROID_XU3_H #include #include #define CFG_SYS_SDRAM_BASE 0x40000000 #define TZPC_BASE_OFFSET 0x10000 #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ /* DFU */ #define DFU_DEFAULT_POLL_TIMEOUT 300 #define DFU_MANIFEST_POLL_TIMEOUT 25000 #define CFG_DFU_ALT_SYSTEM \ "uImage fat 0 1;" \ "zImage fat 0 1;" \ "Image.itb fat 0 1;" \ "uInitrd fat 0 1;" \ "boot.scr fat 0 1;" \ "boot.cmd fat 0 1;" \ "exynos5422-odroidxu3.dtb fat 0 1;" \ "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ "exynos5422-odroidxu4.dtb fat 0 1;" \ "exynos5422-odroidhc1.dtb fat 0 1;" \ "boot part 0 1;" \ "root part 0 2\0" #define CFG_DFU_ALT_BOOT_EMMC \ "u-boot raw 0x3e 0x800 mmcpart 1;" \ "bl1 raw 0x0 0x1e mmcpart 1;" \ "bl2 raw 0x1e 0x1d mmcpart 1;" \ "tzsw raw 0x83e 0x200 mmcpart 1;" \ "params.bin raw 0x1880 0x20\0" #define CFG_DFU_ALT_BOOT_SD \ "u-boot raw 0x3f 0x800;" \ "bl1 raw 0x1 0x1e;" \ "bl2 raw 0x1f 0x1d;" \ "tzsw raw 0x83f 0x200;" \ "params.bin raw 0x1880 0x20\0" /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) /* Set soc_rev, soc_id, board_rev, board_name, fdtfile */ #define CONFIG_ODROID_REV_AIN 9 /* * Need to override existing one (smdk5420) with odroid so set_board_info will * use proper prefix when creating full board_name (SYS_BOARD + type) */ /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ EXYNOS_DEVICE_SETTINGS \ EXYNOS_FDTFILE_SETTING \ MEM_LAYOUT_ENV_SETTINGS \ BOOTENV \ "rootfstype=ext4\0" \ "console=console=ttySAC2,115200n8\0" \ "fdtfile=exynos5422-odroidxu3.dtb\0" \ "board=odroid\0" \ "board_name=odroidxu3\0" \ "mmcbootdev=0\0" \ "mmcrootdev=0\0" \ "mmcbootpart=1\0" \ "mmcrootpart=2\0" \ "dfu_alt_system="CFG_DFU_ALT_SYSTEM \ "dfu_alt_info=Autoset by THOR/DFU command run.\0" #endif /* __CONFIG_H */