# SPDX-License-Identifier: GPL-2.0+ # Copyright (c) 2016 Google, Inc # # Base class for all entries # from collections import namedtuple import importlib import os import pathlib import sys import time from binman import bintool from binman import elf from dtoc import fdt_util from patman import tools from patman.tools import to_hex, to_hex_size from patman import tout modules = {} # This is imported if needed state = None # An argument which can be passed to entries on the command line, in lieu of # device-tree properties. EntryArg = namedtuple('EntryArg', ['name', 'datatype']) # Information about an entry for use when displaying summaries EntryInfo = namedtuple('EntryInfo', ['indent', 'name', 'etype', 'size', 'image_pos', 'uncomp_size', 'offset', 'entry']) class Entry(object): """An Entry in the section An entry corresponds to a single node in the device-tree description of the section. Each entry ends up being a part of the final section. Entries can be placed either right next to each other, or with padding between them. The type of the entry determines the data that is in it. This class is not used by itself. All entry objects are subclasses of Entry. Attributes: section: Section object containing this entry node: The node that created this entry offset: Offset of entry within the section, None if not known yet (in which case it will be calculated by Pack()) size: Entry size in bytes, None if not known pre_reset_size: size as it was before ResetForPack(). This allows us to keep track of the size we started with and detect size changes uncomp_size: Size of uncompressed data in bytes, if the entry is compressed, else None contents_size: Size of contents in bytes, 0 by default align: Entry start offset alignment relative to the start of the containing section, or None align_size: Entry size alignment, or None align_end: Entry end offset alignment relative to the start of the containing section, or None pad_before: Number of pad bytes before the contents when it is placed in the containing section, 0 if none. The pad bytes become part of the entry. pad_after: Number of pad bytes after the contents when it is placed in the containing section, 0 if none. The pad bytes become part of the entry. data: Contents of entry (string of bytes). This does not include padding created by pad_before or pad_after. If the entry is compressed, this contains the compressed data. uncomp_data: Original uncompressed data, if this entry is compressed, else None compress: Compression algoithm used (e.g. 'lz4'), 'none' if none orig_offset: Original offset value read from node orig_size: Original size value read from node missing: True if this entry is missing its contents allow_missing: Allow children of this entry to be missing (used by subclasses such as Entry_section) allow_fake: Allow creating a dummy fake file if the blob file is not available. This is mainly used for testing. external: True if this entry contains an external binary blob bintools: Bintools used by this entry (only populated for Image) missing_bintools: List of missing bintools for this entry update_hash: True if this entry's "hash" subnode should be updated with a hash of the entry contents comp_bintool: Bintools used for compress and decompress data fake_fname: Fake filename, if one was created, else None required_props (dict of str): Properties which must be present. This can be added to by subclasses elf_fname (str): Filename of the ELF file, if this entry holds an ELF file, or is a binary file produced from an ELF file auto_write_symbols (bool): True to write ELF symbols into this entry's contents """ fake_dir = None def __init__(self, section, etype, node, name_prefix='', auto_write_symbols=False): # Put this here to allow entry-docs and help to work without libfdt global state from binman import state self.section = section self.etype = etype self._node = node self.name = node and (name_prefix + node.name) or 'none' self.offset = None self.size = None self.pre_reset_size = None self.uncomp_size = None self.data = None self.uncomp_data = None self.contents_size = 0 self.align = None self.align_size = None self.align_end = None self.pad_before = 0 self.pad_after = 0 self.offset_unset = False self.image_pos = None self.extend_size = False self.compress = 'none' self.missing = False self.faked = False self.external = False self.allow_missing = False self.allow_fake = False self.bintools = {} self.missing_bintools = [] self.update_hash = True self.fake_fname = None self.required_props = [] self.comp_bintool = None self.elf_fname = None self.auto_write_symbols = auto_write_symbols @staticmethod def FindEntryClass(etype, expanded): """Look up the entry class for a node. Args: node_node: Path name of Node object containing information about the entry to create (used for errors) etype: Entry type to use expanded: Use the expanded version of etype Returns: The entry class object if found, else None if not found and expanded is True, else a tuple: module name that could not be found exception received """ # Convert something like 'u-boot@0' to 'u_boot' since we are only # interested in the type. module_name = etype.replace('-', '_') if '@' in module_name: module_name = module_name.split('@')[0] if expanded: module_name += '_expanded' module = modules.get(module_name) # Also allow entry-type modules to be brought in from the etype directory. # Import the module if we have not already done so. if not module: try: module = importlib.import_module('binman.etype.' + module_name) except ImportError as e: if expanded: return None return module_name, e modules[module_name] = module # Look up the expected class name return getattr(module, 'Entry_%s' % module_name) @staticmethod def Lookup(node_path, etype, expanded, missing_etype=False): """Look up the entry class for a node. Args: node_node (str): Path name of Node object containing information about the entry to create (used for errors) etype (str): Entry type to use expanded (bool): Use the expanded version of etype missing_etype (bool): True to default to a blob etype if the requested etype is not found Returns: The entry class object if found, else None if not found and expanded is True Raise: ValueError if expanded is False and the class is not found """ # Convert something like 'u-boot@0' to 'u_boot' since we are only # interested in the type. cls = Entry.FindEntryClass(etype, expanded) if cls is None: return None elif isinstance(cls, tuple): if missing_etype: cls = Entry.FindEntryClass('blob', False) if isinstance(cls, tuple): # This should not fail module_name, e = cls raise ValueError( "Unknown entry type '%s' in node '%s' (expected etype/%s.py, error '%s'" % (etype, node_path, module_name, e)) return cls @staticmethod def Create(section, node, etype=None, expanded=False, missing_etype=False): """Create a new entry for a node. Args: section (entry_Section): Section object containing this node node (Node): Node object containing information about the entry to create etype (str): Entry type to use, or None to work it out (used for tests) expanded (bool): Use the expanded version of etype missing_etype (bool): True to default to a blob etype if the requested etype is not found Returns: A new Entry object of the correct type (a subclass of Entry) """ if not etype: etype = fdt_util.GetString(node, 'type', node.name) obj = Entry.Lookup(node.path, etype, expanded, missing_etype) if obj and expanded: # Check whether to use the expanded entry new_etype = etype + '-expanded' can_expand = not fdt_util.GetBool(node, 'no-expanded') if can_expand and obj.UseExpanded(node, etype, new_etype): etype = new_etype else: obj = None if not obj: obj = Entry.Lookup(node.path, etype, False, missing_etype) # Call its constructor to get the object we want. return obj(section, etype, node) def ReadNode(self): """Read entry information from the node This must be called as the first thing after the Entry is created. This reads all the fields we recognise from the node, ready for use. """ self.ensure_props() if 'pos' in self._node.props: self.Raise("Please use 'offset' instead of 'pos'") if 'expand-size' in self._node.props: self.Raise("Please use 'extend-size' instead of 'expand-size'") self.offset = fdt_util.GetInt(self._node, 'offset') self.size = fdt_util.GetInt(self._node, 'size') self.orig_offset = fdt_util.GetInt(self._node, 'orig-offset') self.orig_size = fdt_util.GetInt(self._node, 'orig-size') if self.GetImage().copy_to_orig: self.orig_offset = self.offset self.orig_size = self.size # These should not be set in input files, but are set in an FDT map, # which is also read by this code. self.image_pos = fdt_util.GetInt(self._node, 'image-pos') self.uncomp_size = fdt_util.GetInt(self._node, 'uncomp-size') self.align = fdt_util.GetInt(self._node, 'align') if tools.not_power_of_two(self.align): raise ValueError("Node '%s': Alignment %s must be a power of two" % (self._node.path, self.align)) if self.section and self.align is None: self.align = self.section.align_default self.pad_before = fdt_util.GetInt(self._node, 'pad-before', 0) self.pad_after = fdt_util.GetInt(self._node, 'pad-after', 0) self.align_size = fdt_util.GetInt(self._node, 'align-size') if tools.not_power_of_two(self.align_size): self.Raise("Alignment size %s must be a power of two" % self.align_size) self.align_end = fdt_util.GetInt(self._node, 'align-end') self.offset_unset = fdt_util.GetBool(self._node, 'offset-unset') self.extend_size = fdt_util.GetBool(self._node, 'extend-size') self.missing_msg = fdt_util.GetString(self._node, 'missing-msg') # This is only supported by blobs and sections at present self.compress = fdt_util.GetString(self._node, 'compress', 'none') def GetDefaultFilename(self): return None def GetFdts(self): """Get the device trees used by this entry Returns: Empty dict, if this entry is not a .dtb, otherwise: Dict: key: Filename from this entry (without the path) value: Tuple: Entry object for this dtb Filename of file containing this dtb """ return {} def gen_entries(self): """Allow entries to generate other entries Some entries generate subnodes automatically, from which sub-entries are then created. This method allows those to be added to the binman definition for the current image. An entry which implements this method should call state.AddSubnode() to add a subnode and can add properties with state.AddString(), etc. An example is 'files', which produces a section containing a list of files. """ pass def AddMissingProperties(self, have_image_pos): """Add new properties to the device tree as needed for this entry Args: have_image_pos: True if this entry has an image position. This can be False if its parent section is compressed, since compression groups all entries together into a compressed block of data, obscuring the start of each individual child entry """ for prop in ['offset', 'size']: if not prop in self._node.props: state.AddZeroProp(self._node, prop) if have_image_pos and 'image-pos' not in self._node.props: state.AddZeroProp(self._node, 'image-pos') if self.GetImage().allow_repack: if self.orig_offset is not None: state.AddZeroProp(self._node, 'orig-offset', True) if self.orig_size is not None: state.AddZeroProp(self._node, 'orig-size', True) if self.compress != 'none': state.AddZeroProp(self._node, 'uncomp-size') if self.update_hash: err = state.CheckAddHashProp(self._node) if err: self.Raise(err) def SetCalculatedProperties(self): """Set the value of device-tree properties calculated by binman""" state.SetInt(self._node, 'offset', self.offset) state.SetInt(self._node, 'size', self.size) base = self.section.GetRootSkipAtStart() if self.section else 0 if self.image_pos is not None: state.SetInt(self._node, 'image-pos', self.image_pos - base) if self.GetImage().allow_repack: if self.orig_offset is not None: state.SetInt(self._node, 'orig-offset', self.orig_offset, True) if self.orig_size is not None: state.SetInt(self._node, 'orig-size', self.orig_size, True) if self.uncomp_size is not None: state.SetInt(self._node, 'uncomp-size', self.uncomp_size) if self.update_hash: state.CheckSetHashValue(self._node, self.GetData) def ProcessFdt(self, fdt): """Allow entries to adjust the device tree Some entries need to adjust the device tree for their purposes. This may involve adding or deleting properties. Returns: True if processing is complete False if processing could not be completed due to a dependency. This will cause the entry to be retried after others have been called """ return True def SetPrefix(self, prefix): """Set the name prefix for a node Args: prefix: Prefix to set, or '' to not use a prefix """ if prefix: self.name = prefix + self.name def SetContents(self, data): """Set the contents of an entry This sets both the data and content_size properties Args: data: Data to set to the contents (bytes) """ self.data = data self.contents_size = len(self.data) def ProcessContentsUpdate(self, data): """Update the contents of an entry, after the size is fixed This checks that the new data is the same size as the old. If the size has changed, this triggers a re-run of the packing algorithm. Args: data: Data to set to the contents (bytes) Raises: ValueError if the new data size is not the same as the old """ size_ok = True new_size = len(data) if state.AllowEntryExpansion() and new_size > self.contents_size: # self.data will indicate the new size needed size_ok = False elif state.AllowEntryContraction() and new_size < self.contents_size: size_ok = False # If not allowed to change, try to deal with it or give up if size_ok: if new_size > self.contents_size: self.Raise('Cannot update entry size from %d to %d' % (self.contents_size, new_size)) # Don't let the data shrink. Pad it if necessary if size_ok and new_size < self.contents_size: data += tools.get_bytes(0, self.contents_size - new_size) if not size_ok: tout.debug("Entry '%s' size change from %s to %s" % ( self._node.path, to_hex(self.contents_size), to_hex(new_size))) self.SetContents(data) return size_ok def ObtainContents(self, skip_entry=None, fake_size=0): """Figure out the contents of an entry. Args: skip_entry (Entry): Entry to skip when obtaining section contents fake_size (int): Size of fake file to create if needed Returns: True if the contents were found, False if another call is needed after the other entries are processed. """ # No contents by default: subclasses can implement this return True def ResetForPack(self): """Reset offset/size fields so that packing can be done again""" self.Detail('ResetForPack: offset %s->%s, size %s->%s' % (to_hex(self.offset), to_hex(self.orig_offset), to_hex(self.size), to_hex(self.orig_size))) self.pre_reset_size = self.size self.offset = self.orig_offset self.size = self.orig_size def Pack(self, offset): """Figure out how to pack the entry into the section Most of the time the entries are not fully specified. There may be an alignment but no size. In that case we take the size from the contents of the entry. If an entry has no hard-coded offset, it will be placed at @offset. Once this function is complete, both the offset and size of the entry will be know. Args: Current section offset pointer Returns: New section offset pointer (after this entry) """ self.Detail('Packing: offset=%s, size=%s, content_size=%x' % (to_hex(self.offset), to_hex(self.size), self.contents_size)) if self.offset is None: if self.offset_unset: self.Raise('No offset set with offset-unset: should another ' 'entry provide this correct offset?') self.offset = tools.align(offset, self.align) needed = self.pad_before + self.contents_size + self.pad_after needed = tools.align(needed, self.align_size) size = self.size if not size: size = needed new_offset = self.offset + size aligned_offset = tools.align(new_offset, self.align_end) if aligned_offset != new_offset: size = aligned_offset - self.offset new_offset = aligned_offset if not self.size: self.size = size if self.size < needed: self.Raise("Entry contents size is %#x (%d) but entry size is " "%#x (%d)" % (needed, needed, self.size, self.size)) # Check that the alignment is correct. It could be wrong if the # and offset or size values were provided (i.e. not calculated), but # conflict with the provided alignment values if self.size != tools.align(self.size, self.align_size): self.Raise("Size %#x (%d) does not match align-size %#x (%d)" % (self.size, self.size, self.align_size, self.align_size)) if self.offset != tools.align(self.offset, self.align): self.Raise("Offset %#x (%d) does not match align %#x (%d)" % (self.offset, self.offset, self.align, self.align)) self.Detail(' - packed: offset=%#x, size=%#x, content_size=%#x, next_offset=%x' % (self.offset, self.size, self.contents_size, new_offset)) return new_offset def Raise(self, msg): """Convenience function to raise an error referencing a node""" raise ValueError("Node '%s': %s" % (self._node.path, msg)) def Info(self, msg): """Convenience function to log info referencing a node""" tag = "Info '%s'" % self._node.path tout.detail('%30s: %s' % (tag, msg)) def Detail(self, msg): """Convenience function to log detail referencing a node""" tag = "Node '%s'" % self._node.path tout.detail('%30s: %s' % (tag, msg)) def GetEntryArgsOrProps(self, props, required=False): """Return the values of a set of properties Args: props: List of EntryArg objects Raises: ValueError if a property is not found """ values = [] missing = [] for prop in props: python_prop = prop.name.replace('-', '_') if hasattr(self, python_prop): value = getattr(self, python_prop) else: value = None if value is None: value = self.GetArg(prop.name, prop.datatype) if value is None and required: missing.append(prop.name) values.append(value) if missing: self.GetImage().MissingArgs(self, missing) return values def GetPath(self): """Get the path of a node Returns: Full path of the node for this entry """ return self._node.path def GetData(self, required=True): """Get the contents of an entry Args: required: True if the data must be present, False if it is OK to return None Returns: bytes content of the entry, excluding any padding. If the entry is compressed, the compressed data is returned """ self.Detail('GetData: size %s' % to_hex_size(self.data)) return self.data def GetPaddedData(self, data=None): """Get the data for an entry including any padding Gets the entry data and uses its section's pad-byte value to add padding before and after as defined by the pad-before and pad-after properties. This does not consider alignment. Returns: Contents of the entry along with any pad bytes before and after it (bytes) """ if data is None: data = self.GetData() return self.section.GetPaddedDataForEntry(self, data) def GetOffsets(self): """Get the offsets for siblings Some entry types can contain information about the position or size of other entries. An example of this is the Intel Flash Descriptor, which knows where the Intel Management Engine section should go. If this entry knows about the position of other entries, it can specify this by returning values here Returns: Dict: key: Entry type value: List containing position and size of the given entry type. Either can be None if not known """ return {} def SetOffsetSize(self, offset, size): """Set the offset and/or size of an entry Args: offset: New offset, or None to leave alone size: New size, or None to leave alone """ if offset is not None: self.offset = offset if size is not None: self.size = size def SetImagePos(self, image_pos): """Set the position in the image Args: image_pos: Position of this entry in the image """ self.image_pos = image_pos + self.offset def ProcessContents(self): """Do any post-packing updates of entry contents This function should call ProcessContentsUpdate() to update the entry contents, if necessary, returning its return value here. Args: data: Data to set to the contents (bytes) Returns: True if the new data size is OK, False if expansion is needed Raises: ValueError if the new data size is not the same as the old and state.AllowEntryExpansion() is False """ return True def WriteSymbols(self, section): """Write symbol values into binary files for access at run time Args: section: Section containing the entry """ if self.auto_write_symbols: # Check if we are writing symbols into an ELF file is_elf = self.GetDefaultFilename() == self.elf_fname elf.LookupAndWriteSymbols(self.elf_fname, self, section.GetImage(), is_elf) def CheckEntries(self): """Check that the entry offsets are correct This is used for entries which have extra offset requirements (other than having to be fully inside their section). Sub-classes can implement this function and raise if there is a problem. """ pass @staticmethod def GetStr(value): if value is None: return ' ' return '%08x' % value @staticmethod def WriteMapLine(fd, indent, name, offset, size, image_pos): print('%s %s%s %s %s' % (Entry.GetStr(image_pos), ' ' * indent, Entry.GetStr(offset), Entry.GetStr(size), name), file=fd) def WriteMap(self, fd, indent): """Write a map of the entry to a .map file Args: fd: File to write the map to indent: Curent indent level of map (0=none, 1=one level, etc.) """ self.WriteMapLine(fd, indent, self.name, self.offset, self.size, self.image_pos) # pylint: disable=assignment-from-none def GetEntries(self): """Return a list of entries contained by this entry Returns: List of entries, or None if none. A normal entry has no entries within it so will return None """ return None def FindEntryByNode(self, find_node): """Find a node in an entry, searching all subentries This does a recursive search. Args: find_node (fdt.Node): Node to find Returns: Entry: entry, if found, else None """ entries = self.GetEntries() if entries: for entry in entries.values(): if entry._node == find_node: return entry found = entry.FindEntryByNode(find_node) if found: return found return None def GetArg(self, name, datatype=str): """Get the value of an entry argument or device-tree-node property Some node properties can be provided as arguments to binman. First check the entry arguments, and fall back to the device tree if not found Args: name: Argument name datatype: Data type (str or int) Returns: Value of argument as a string or int, or None if no value Raises: ValueError if the argument cannot be converted to in """ value = state.GetEntryArg(name) if value is not None: if datatype == int: try: value = int(value) except ValueError: self.Raise("Cannot convert entry arg '%s' (value '%s') to integer" % (name, value)) elif datatype == str: pass else: raise ValueError("GetArg() internal error: Unknown data type '%s'" % datatype) else: value = fdt_util.GetDatatype(self._node, name, datatype) return value @staticmethod def WriteDocs(modules, test_missing=None): """Write out documentation about the various entry types to stdout Args: modules: List of modules to include test_missing: Used for testing. This is a module to report as missing """ print('''Binman Entry Documentation =========================== This file describes the entry types supported by binman. These entry types can be placed in an image one by one to build up a final firmware image. It is fairly easy to create new entry types. Just add a new file to the 'etype' directory. You can use the existing entries as examples. Note that some entries are subclasses of others, using and extending their features to produce new behaviours. ''') modules = sorted(modules) # Don't show the test entry if '_testing' in modules: modules.remove('_testing') missing = [] for name in modules: module = Entry.Lookup('WriteDocs', name, False) docs = getattr(module, '__doc__') if test_missing == name: docs = None if docs: lines = docs.splitlines() first_line = lines[0] rest = [line[4:] for line in lines[1:]] hdr = 'Entry: %s: %s' % (name.replace('_', '-'), first_line) # Create a reference for use by rST docs ref_name = f'etype_{module.__name__[6:]}'.lower() print('.. _%s:' % ref_name) print() print(hdr) print('-' * len(hdr)) print('\n'.join(rest)) print() print() else: missing.append(name) if missing: raise ValueError('Documentation is missing for modules: %s' % ', '.join(missing)) def GetUniqueName(self): """Get a unique name for a node Returns: String containing a unique name for a node, consisting of the name of all ancestors (starting from within the 'binman' node) separated by a dot ('.'). This can be useful for generating unique filesnames in the output directory. """ name = self.name node = self._node while node.parent: node = node.parent if node.name in ('binman', '/'): break name = '%s.%s' % (node.name, name) return name def extend_to_limit(self, limit): """Extend an entry so that it ends at the given offset limit""" if self.offset + self.size < limit: self.size = limit - self.offset # Request the contents again, since changing the size requires that # the data grows. This should not fail, but check it to be sure. if not self.ObtainContents(): self.Raise('Cannot obtain contents when expanding entry') def HasSibling(self, name): """Check if there is a sibling of a given name Returns: True if there is an entry with this name in the the same section, else False """ return name in self.section.GetEntries() def GetSiblingImagePos(self, name): """Return the image position of the given sibling Returns: Image position of sibling, or None if the sibling has no position, or False if there is no such sibling """ if not self.HasSibling(name): return False return self.section.GetEntries()[name].image_pos @staticmethod def AddEntryInfo(entries, indent, name, etype, size, image_pos, uncomp_size, offset, entry): """Add a new entry to the entries list Args: entries: List (of EntryInfo objects) to add to indent: Current indent level to add to list name: Entry name (string) etype: Entry type (string) size: Entry size in bytes (int) image_pos: Position within image in bytes (int) uncomp_size: Uncompressed size if the entry uses compression, else None offset: Entry offset within parent in bytes (int) entry: Entry object """ entries.append(EntryInfo(indent, name, etype, size, image_pos, uncomp_size, offset, entry)) def ListEntries(self, entries, indent): """Add files in this entry to the list of entries This can be overridden by subclasses which need different behaviour. Args: entries: List (of EntryInfo objects) to add to indent: Current indent level to add to list """ self.AddEntryInfo(entries, indent, self.name, self.etype, self.size, self.image_pos, self.uncomp_size, self.offset, self) def ReadData(self, decomp=True, alt_format=None): """Read the data for an entry from the image This is used when the image has been read in and we want to extract the data for a particular entry from that image. Args: decomp: True to decompress any compressed data before returning it; False to return the raw, uncompressed data Returns: Entry data (bytes) """ # Use True here so that we get an uncompressed section to work from, # although compressed sections are currently not supported tout.debug("ReadChildData section '%s', entry '%s'" % (self.section.GetPath(), self.GetPath())) data = self.section.ReadChildData(self, decomp, alt_format) return data def ReadChildData(self, child, decomp=True, alt_format=None): """Read the data for a particular child entry This reads data from the parent and extracts the piece that relates to the given child. Args: child (Entry): Child entry to read data for (must be valid) decomp (bool): True to decompress any compressed data before returning it; False to return the raw, uncompressed data alt_format (str): Alternative format to read in, or None Returns: Data for the child (bytes) """ pass def LoadData(self, decomp=True): data = self.ReadData(decomp) self.contents_size = len(data) self.ProcessContentsUpdate(data) self.Detail('Loaded data size %x' % len(data)) def GetAltFormat(self, data, alt_format): """Read the data for an extry in an alternative format Supported formats are list in the documentation for each entry. An example is fdtmap which provides . Args: data (bytes): Data to convert (this should have been produced by the entry) alt_format (str): Format to use """ pass def GetImage(self): """Get the image containing this entry Returns: Image object containing this entry """ return self.section.GetImage() def WriteData(self, data, decomp=True): """Write the data to an entry in the image This is used when the image has been read in and we want to replace the data for a particular entry in that image. The image must be re-packed and written out afterwards. Args: data: Data to replace it with decomp: True to compress the data if needed, False if data is already compressed so should be used as is Returns: True if the data did not result in a resize of this entry, False if the entry must be resized """ if self.size is not None: self.contents_size = self.size else: self.contents_size = self.pre_reset_size ok = self.ProcessContentsUpdate(data) self.Detail('WriteData: size=%x, ok=%s' % (len(data), ok)) section_ok = self.section.WriteChildData(self) return ok and section_ok def WriteChildData(self, child): """Handle writing the data in a child entry This should be called on the child's parent section after the child's data has been updated. It should update any data structures needed to validate that the update is successful. This base-class implementation does nothing, since the base Entry object does not have any children. Args: child: Child Entry that was written Returns: True if the section could be updated successfully, False if the data is such that the section could not update """ return True def GetSiblingOrder(self): """Get the relative order of an entry amoung its siblings Returns: 'start' if this entry is first among siblings, 'end' if last, otherwise None """ entries = list(self.section.GetEntries().values()) if entries: if self == entries[0]: return 'start' elif self == entries[-1]: return 'end' return 'middle' def SetAllowMissing(self, allow_missing): """Set whether a section allows missing external blobs Args: allow_missing: True if allowed, False if not allowed """ # This is meaningless for anything other than sections pass def SetAllowFakeBlob(self, allow_fake): """Set whether a section allows to create a fake blob Args: allow_fake: True if allowed, False if not allowed """ self.allow_fake = allow_fake def CheckMissing(self, missing_list): """Check if any entries in this section have missing external blobs If there are missing blobs, the entries are added to the list Args: missing_list: List of Entry objects to be added to """ if self.missing: missing_list.append(self) def check_fake_fname(self, fname, size=0): """If the file is missing and the entry allows fake blobs, fake it Sets self.faked to True if faked Args: fname (str): Filename to check size (int): Size of fake file to create Returns: tuple: fname (str): Filename of faked file bool: True if the blob was faked, False if not """ if self.allow_fake and not pathlib.Path(fname).is_file(): if not self.fake_fname: outfname = os.path.join(self.fake_dir, os.path.basename(fname)) with open(outfname, "wb") as out: out.truncate(size) tout.info(f"Entry '{self._node.path}': Faked blob '{outfname}'") self.fake_fname = outfname self.faked = True return self.fake_fname, True return fname, False def CheckFakedBlobs(self, faked_blobs_list): """Check if any entries in this section have faked external blobs If there are faked blobs, the entries are added to the list Args: fake_blobs_list: List of Entry objects to be added to """ # This is meaningless for anything other than blobs pass def GetAllowMissing(self): """Get whether a section allows missing external blobs Returns: True if allowed, False if not allowed """ return self.allow_missing def record_missing_bintool(self, bintool): """Record a missing bintool that was needed to produce this entry Args: bintool (Bintool): Bintool that was missing """ if bintool not in self.missing_bintools: self.missing_bintools.append(bintool) def check_missing_bintools(self, missing_list): """Check if any entries in this section have missing bintools If there are missing bintools, these are added to the list Args: missing_list: List of Bintool objects to be added to """ for bintool in self.missing_bintools: if bintool not in missing_list: missing_list.append(bintool) def GetHelpTags(self): """Get the tags use for missing-blob help Returns: list of possible tags, most desirable first """ return list(filter(None, [self.missing_msg, self.name, self.etype])) def CompressData(self, indata): """Compress data according to the entry's compression method Args: indata: Data to compress Returns: Compressed data """ self.uncomp_data = indata if self.compress != 'none': self.uncomp_size = len(indata) if self.comp_bintool.is_present(): data = self.comp_bintool.compress(indata) else: self.record_missing_bintool(self.comp_bintool) data = tools.get_bytes(0, 1024) else: data = indata return data def DecompressData(self, indata): """Decompress data according to the entry's compression method Args: indata: Data to decompress Returns: Decompressed data """ if self.compress != 'none': if self.comp_bintool.is_present(): data = self.comp_bintool.decompress(indata) self.uncomp_size = len(data) else: self.record_missing_bintool(self.comp_bintool) data = tools.get_bytes(0, 1024) else: data = indata self.uncomp_data = data return data @classmethod def UseExpanded(cls, node, etype, new_etype): """Check whether to use an expanded entry type This is called by Entry.Create() when it finds an expanded version of an entry type (e.g. 'u-boot-expanded'). If this method returns True then it will be used (e.g. in place of 'u-boot'). If it returns False, it is ignored. Args: node: Node object containing information about the entry to create etype: Original entry type being used new_etype: New entry type proposed Returns: True to use this entry type, False to use the original one """ tout.info("Node '%s': etype '%s': %s selected" % (node.path, etype, new_etype)) return True def CheckAltFormats(self, alt_formats): """Add any alternative formats supported by this entry type Args: alt_formats (dict): Dict to add alt_formats to: key: Name of alt format value: Help text """ pass def AddBintools(self, btools): """Add the bintools used by this entry type Args: btools (dict of Bintool): Raise: ValueError if compression algorithm is not supported """ algo = self.compress if algo != 'none': algos = ['bzip2', 'gzip', 'lz4', 'lzma', 'lzo', 'xz', 'zstd'] if algo not in algos: raise ValueError("Unknown algorithm '%s'" % algo) names = {'lzma': 'lzma_alone', 'lzo': 'lzop'} name = names.get(self.compress, self.compress) self.comp_bintool = self.AddBintool(btools, name) @classmethod def AddBintool(self, tools, name): """Add a new bintool to the tools used by this etype Args: name: Name of the tool """ btool = bintool.Bintool.create(name) tools[name] = btool return btool def SetUpdateHash(self, update_hash): """Set whether this entry's "hash" subnode should be updated Args: update_hash: True if hash should be updated, False if not """ self.update_hash = update_hash def collect_contents_to_file(self, entries, prefix, fake_size=0): """Put the contents of a list of entries into a file Args: entries (list of Entry): Entries to collect prefix (str): Filename prefix of file to write to fake_size (int): Size of fake file to create if needed If any entry does not have contents yet, this function returns False for the data. Returns: Tuple: bytes: Concatenated data from all the entries (or None) str: Filename of file written (or None if no data) str: Unique portion of filename (or None if no data) """ data = b'' for entry in entries: # First get the input data and put it in a file. If not available, # try later. if not entry.ObtainContents(fake_size=fake_size): return None, None, None data += entry.GetData() uniq = self.GetUniqueName() fname = tools.get_output_filename(f'{prefix}.{uniq}') tools.write_file(fname, data) return data, fname, uniq @classmethod def create_fake_dir(cls): """Create the directory for fake files""" cls.fake_dir = tools.get_output_filename('binman-fake') if not os.path.exists(cls.fake_dir): os.mkdir(cls.fake_dir) tout.notice(f"Fake-blob dir is '{cls.fake_dir}'") def ensure_props(self): """Raise an exception if properties are missing Args: prop_list (list of str): List of properties to check for Raises: ValueError: Any property is missing """ not_present = [] for prop in self.required_props: if not prop in self._node.props: not_present.append(prop) if not_present: self.Raise(f"'{self.etype}' entry is missing properties: {' '.join(not_present)}")