Coding style cleanup, update CHANGELOG, prepare release

Signed-off-by: Wolfgang Denk <wd@denx.de>

.gitignore

@@ -26,6 +26,8 @@
 /u-boot.ldr
 /u-boot.ldr.hex
 /u-boot.ldr.srec
+/u-boot-onenand.bin
+/u-boot-flexonenand.bin
 
 #
 # Generated files
@@ -46,3 +48,8 @@ series
 
 # cscope files
 cscope.*
+
+# OneNAND IPL files
+/onenand_ipl/onenand-ipl*
+/onenand_ipl/board/*/onenand*
+/onenand_ipl/board/*/*.S

MAINTAINERS

@@ -239,6 +239,10 @@ The LEOX team <team@leox.org>
 
 	ELPT860		MPC860T
 
+Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+
+	linkstation	MPC8241
+
 Dave Liu <daveliu@freescale.com>
 
 	MPC8315ERDB	MPC8315
@@ -412,14 +416,14 @@ Stephen Williams <steve@icarus.com>
 
 	JSE		PPC405GPr
 
+Roy Zang <tie-fei.zang@freescale.com>
+
+	mpc7448hpc2	MPC7448
+
 John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx	MPC8xx
 
-Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-
-	linkstation	MPC8241
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -523,6 +527,10 @@ Rolf Offermanns <rof@sysgo.de>
 
 	shannon		SA1100
 
+Kyungmin Park <kyungmin.park@samsung.com>
+
+	apollon		ARM1136EJS
+
 Peter Pearse <peter.pearse@arm.com>
 	integratorcp	All current ARM supplied & supported core modules
 			-see http://www.arm.com/products/DevTools/Hardware_Platforms.html
@@ -552,6 +560,13 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 	csb226		xscale
 	innokom		xscale
 
+Michael Schwingen <michael@schwingen.org>
+
+	actux1		xscale
+	actux2		xscale
+	actux3		xscale
+	actux4		xscale
+
 Andrea Scian <andrea.scian@dave-tech.it>
 
 	B2		ARM7TDMI (S3C44B0X)
@@ -566,22 +581,11 @@ Richard Woodruff <r-woodruff2@ti.com>
 
 	omap2420h4	ARM1136EJS
 
-Kyungmin Park <kyungmin.park@samsung.com>
-
-	apollon		ARM1136EJS
-
 Alex Z<>pke <azu@sysgo.de>
 
 	lart		SA1100
 	dnp1110		SA1110
 
-Michael Schwingen <michael@schwingen.org>
-
-	actux1		xscale
-	actux2		xscale
-	actux3		xscale
-	actux4		xscale
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -679,6 +683,10 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 
 	TASREG		MCF5249
 
+Hayden Fraser <Hayden.Fraser@freescale.com>
+
+	M5253EVBE	mcf52x2
+
 TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 
 	M52277EVB	mcf5227x
@@ -689,10 +697,6 @@ TsiChung Liew <Tsi-Chung.Liew@freescale.com>
 	M5475EVB	mcf547x_8x
 	M5485EVB	mcf547x_8x
 
-Hayden Fraser <Hayden.Fraser@freescale.com>
-
-	M5253EVBE	mcf52x2
-
 #########################################################################
 # AVR32 Systems:							#
 #									#
@@ -716,6 +720,10 @@ Haavard Skinnemoen <hskinnemoen@atmel.com>
 #	Board		CPU						#
 #########################################################################
 
+Yusuke Goda <goda.yusuke@renesas.com>
+
+	MIGO-R		SH7722
+
 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 
 	MS7750SE	SH7750
@@ -732,10 +740,6 @@ Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
 
 	MS7720SE	SH7720
 
-Yusuke Goda <goda.yusuke@renesas.com>
-
-	MIGO-R		SH7722
-
 #########################################################################
 # Blackfin Systems:							#
 #									#

MAKEALL

@@ -540,7 +540,6 @@ LIST_at91="		\
 #########################################################################
 
 LIST_pxa="		\
-	adsvix		\
 	cerf250		\
 	cradle		\
 	csb226		\

Makefile

@@ -24,7 +24,7 @@
 VERSION = 1
 PATCHLEVEL = 3
 SUBLEVEL = 4
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
@@ -346,10 +346,9 @@ $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
 		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
 
 $(ONENAND_IPL):	$(VERSION_FILE)	$(obj)include/autoconf.mk
-		$(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
+		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
 
 $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
-		$(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all
 		cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
 		cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin
 
@@ -2595,9 +2594,6 @@ actux3_config	:	unconfig
 actux4_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm ixp actux4
 
-adsvix_config	:	unconfig
-	@$(MKCONFIG) $(@:_config=) arm pxa adsvix
-
 cerf250_config :	unconfig
 	@$(MKCONFIG) $(@:_config=) arm pxa cerf250
 
@@ -2664,6 +2660,7 @@ zylonite_config :
 
 apollon_config		: unconfig
 	@mkdir -p $(obj)include
+	@mkdir -p $(obj)onenand_ipl/board/apollon
 	@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
 	@$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx
 	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk

README

@@ -98,7 +98,7 @@ Where we come from:
 - create ARMBoot project (http://sourceforge.net/projects/armboot)
 - add other CPU families (starting with ARM)
 - create U-Boot project (http://sourceforge.net/projects/u-boot)
-- current project page: see http://www.denx.de/wiki/UBoot
+- current project page: see http://www.denx.de/wiki/U-Boot
 
 
 Names and Spelling:
@@ -3903,7 +3903,7 @@ may be rejected, even when they contain important and valuable stuff.
 
 Patches shall be sent to the u-boot-users mailing list.
 
-Please see http://www.denx.de/wiki/UBoot/Patches for details.
+Please see http://www.denx.de/wiki/U-Boot/Patches for details.
 
 When you send a patch, please include the following information with
 it:

api/api_storage.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Semihalf
+ * (C) Copyright 2007-2008 Semihalf
  *
  * Written by: Rafal Jaworowski <raj@semihalf.com>
  *
@@ -46,14 +46,15 @@
 #define ENUM_USB	1
 #define ENUM_SCSI	2
 #define ENUM_MMC	3
-#define ENUM_MAX	4
+#define ENUM_SATA	4
+#define ENUM_MAX	5
 
 struct stor_spec {
 	int		max_dev;
 	int		enum_started;
 	int		enum_ended;
 	int		type;		/* "external" type: DT_STOR_{IDE,USB,etc} */
-	char		name[4];
+	char		*name;
 };
 
 static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, "" }, };
@@ -68,12 +69,19 @@ void dev_stor_init(void)
 	specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
 	specs[ENUM_IDE].name = "ide";
 #endif
-#if defined(CONFIG_CMD_USB)
-	specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV;
-	specs[ENUM_USB].enum_started = 0;
-	specs[ENUM_USB].enum_ended = 0;
-	specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB;
-	specs[ENUM_USB].name = "usb";
+#if defined(CONFIG_CMD_MMC)
+	specs[ENUM_MMC].max_dev = CFG_MMC_MAX_DEVICE;
+	specs[ENUM_MMC].enum_started = 0;
+	specs[ENUM_MMC].enum_ended = 0;
+	specs[ENUM_MMC].type = DEV_TYP_STOR | DT_STOR_MMC;
+	specs[ENUM_MMC].name = "mmc";
+#endif
+#if defined(CONFIG_CMD_SATA)
+	specs[ENUM_SATA].max_dev = CFG_SATA_MAX_DEVICE;
+	specs[ENUM_SATA].enum_started = 0;
+	specs[ENUM_SATA].enum_ended = 0;
+	specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
+	specs[ENUM_SATA].name = "sata";
 #endif
 #if defined(CONFIG_CMD_SCSI)
 	specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
@@ -82,6 +90,13 @@ void dev_stor_init(void)
 	specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI;
 	specs[ENUM_SCSI].name = "scsi";
 #endif
+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+	specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV;
+	specs[ENUM_USB].enum_started = 0;
+	specs[ENUM_USB].enum_ended = 0;
+	specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB;
+	specs[ENUM_USB].name = "usb";
+#endif
 }
 
 /*
@@ -108,7 +123,10 @@ static int dev_stor_get(int type, int first, int *more, struct device_info *di)
 
 	if (first) {
 		di->cookie = (void *)get_dev(specs[type].name, 0);
-		found = 1;
+		if (di->cookie == NULL)
+			return 0;
+		else
+			found = 1;
 
 	} else {
 		for (i = 0; i < specs[type].max_dev; i++)
@@ -123,7 +141,10 @@ static int dev_stor_get(int type, int first, int *more, struct device_info *di)
 				}
 
 				di->cookie = (void *)get_dev(specs[type].name, i);
-				found = 1;
+				if (di->cookie == NULL)
+					return 0;
+				else
+					found = 1;
 
 				/* provide hint if there are more devices in
 				 * this group to enumerate */
@@ -360,7 +381,7 @@ lbasize_t dev_read_stor(void *cookie, void *buf, lbasize_t len, lbastart_t start
 		return 0;
 
 	if ((dd->block_read) == NULL) {
-		debugf("no block_read() for device 0x%08x\n");
+		debugf("no block_read() for device 0x%08x\n", cookie);
 		return 0;
 	}
 

api_examples/demo.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Semihalf
+ * (C) Copyright 2007-2008 Semihalf
  *
  * Written by: Rafal Jaworowski <raj@semihalf.com>
  *
@@ -31,13 +31,15 @@
 
 #define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0)
 
-void	test_dump_si(struct sys_info *);
+#define BUF_SZ		2048
+#define WAIT_SECS	5
+
+void	test_dump_buf(void *, int);
 void	test_dump_di(int);
+void	test_dump_si(struct sys_info *);
 void	test_dump_sig(struct api_signature *);
 
-char buf[2048];
-
-#define WAIT_SECS 5
+static char buf[BUF_SZ];
 
 int main(int argc, char *argv[])
 {
@@ -58,11 +60,12 @@ int main(int argc, char *argv[])
 	if (sig->version > API_SIG_VERSION)
 		return -3;
 
-	printf("API signature found @%x\n", sig);
+	printf("API signature found @%x\n", (unsigned int)sig);
 	test_dump_sig(sig);
 
 	printf("\n*** Consumer API test ***\n");
-	printf("syscall ptr 0x%08x@%08x\n", syscall_ptr, &syscall_ptr);
+	printf("syscall ptr 0x%08x@%08x\n", (unsigned int)syscall_ptr,
+		(unsigned int)&syscall_ptr);
 
 	/* console activities */
 	ub_putc('B');
@@ -125,11 +128,17 @@ int main(int argc, char *argv[])
 	if (i == devs_no)
 		printf("No storage devices available\n");
 	else {
+		memset(buf, 0, BUF_SZ);
+
 		if ((rv = ub_dev_open(i)) != 0)
 			errf("open device %d error %d\n", i, rv);
-		else if ((rv = ub_dev_read(i, &buf, 200, 20)) != 0)
+
+		else if ((rv = ub_dev_read(i, buf, 1, 0)) != 0)
 			errf("could not read from device %d, error %d\n", i, rv);
 
+		printf("Sector 0 dump (512B):\n");
+		test_dump_buf(buf, 512);
+
 		ub_dev_close(i);
 	}
 
@@ -180,7 +189,7 @@ void test_dump_sig(struct api_signature *sig)
 	printf("signature:\n");
 	printf("  version\t= %d\n", sig->version);
 	printf("  checksum\t= 0x%08x\n", sig->checksum);
-	printf("  sc entry\t= 0x%08x\n", sig->syscall);
+	printf("  sc entry\t= 0x%08x\n", (unsigned int)sig->syscall);
 }
 
 void test_dump_si(struct sys_info *si)
@@ -188,9 +197,9 @@ void test_dump_si(struct sys_info *si)
 	int i;
 
 	printf("sys info:\n");
-	printf("  clkbus\t= 0x%08x\n", si->clk_bus);
-	printf("  clkcpu\t= 0x%08x\n", si->clk_cpu);
-	printf("  bar\t\t= 0x%08x\n", si->bar);
+	printf("  clkbus\t= 0x%08x\n", (unsigned int)si->clk_bus);
+	printf("  clkcpu\t= 0x%08x\n", (unsigned int)si->clk_cpu);
+	printf("  bar\t\t= 0x%08x\n", (unsigned int)si->bar);
 
 	printf("---\n");
 	for (i = 0; i < si->mr_no; i++) {
@@ -217,23 +226,56 @@ void test_dump_si(struct sys_info *si)
 	}
 }
 
-static char * test_stor_typ(int type)
+static char *test_stor_typ(int type)
 {
 	if (type & DT_STOR_IDE)
 		return "IDE";
 
+	if (type & DT_STOR_MMC)
+		return "MMC";
+
+	if (type & DT_STOR_SATA)
+		return "SATA";
+
 	if (type & DT_STOR_SCSI)
 		return "SCSI";
 
 	if (type & DT_STOR_USB)
 		return "USB";
 
-	if (type & DT_STOR_MMC);
-		return "MMC";
-
 	return "Unknown";
 }
 
+void test_dump_buf(void *buf, int len)
+{
+	int i;
+	int line_counter = 0;
+	int sep_flag = 0;
+	int addr = 0;
+
+	printf("%07x:\t", addr);
+
+	for (i = 0; i < len; i++) {
+		if (line_counter++ > 15) {
+			line_counter = 0;
+			sep_flag = 0;
+			addr += 16;
+			i--;
+			printf("\n%07x:\t", addr);
+			continue;
+		}
+
+		if (sep_flag++ > 1) {
+			sep_flag = 1;
+			printf(" ");
+		}
+
+		printf("%02x", *((char *)buf++));
+	}
+
+	printf("\n");
+}
+
 void test_dump_di(int handle)
 {
 	int i;
@@ -252,7 +294,7 @@ void test_dump_di(int handle)
 
 	} else if (di->type & DEV_TYP_STOR) {
 		printf("  type\t\t= %s\n", test_stor_typ(di->type));
-		printf("  blk size\t\t= %d\n", di->di_stor.block_size);
-		printf("  blk count\t\t= %d\n", di->di_stor.block_count);
+		printf("  blk size\t\t= %d\n", (unsigned int)di->di_stor.block_size);
+		printf("  blk count\t\t= %d\n", (unsigned int)di->di_stor.block_count);
 	}
 }

board/ads5121/Makefile

@@ -27,7 +27,7 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common)
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS-y	:= $(BOARD).o iopin.o
+COBJS-y	:= $(BOARD).o
 COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
 COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
 COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o

board/ads5121/ads5121.c

@@ -23,14 +23,12 @@
 
 #include <common.h>
 #include <mpc512x.h>
-#include "iopin.h"
 #include <asm/bitops.h>
 #include <command.h>
 #include <fdt_support.h>
 #ifdef CONFIG_MISC_INIT_R
 #include <i2c.h>
 #endif
-#include "iopin.h"	/* for iopin_initialize() prototype */
 
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
@@ -124,7 +122,7 @@ long int fixed_sdram (void)
 	u32 i;
 
 	/* Initialize IO Control */
-	im->io_ctrl.regs[MEM_IDX] = IOCTRL_MUX_DDR;
+	im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR;
 
 	/* Initialize DDR Local Window */
 	im->sysconf.ddrlaw.bar = CFG_DDR_BASE & 0xFFFFF000;
@@ -237,6 +235,56 @@ int misc_init_r(void)
 
 	return 0;
 }
+static  iopin_t ioregs_init[] = {
+	/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
+	{
+		IOCTL_SPDIF_TXCLK, 3, 0,
+		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* Set highest Slew on 9 PATA pins */
+	{
+		IOCTL_PATA_CE1, 9, 1,
+		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
+	{
+		IOCTL_PSC0_0, 15, 0,
+		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* FUNC1=SPDIF_TXCLK */
+	{
+		IOCTL_LPC_CS1, 1, 0,
+		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+	},
+	/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
+	{
+		IOCTL_I2C1_SCL, 2, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+	},
+	/* FUNC2=DIU CLK */
+	{
+		IOCTL_PSC6_0, 1, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
+	},
+	/* FUNC2=DIU_HSYNC */
+	{
+		IOCTL_PSC6_1, 1, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	},
+	/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
+	{
+		IOCTL_PSC6_4, 26, 0,
+		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+	}
+};
 
 int checkboard (void)
 {
@@ -246,7 +294,9 @@ int checkboard (void)
 	printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
 		brd_rev, cpld_rev);
 	/* initialize function mux & slew rate IO inter alia on IO Pins  */
-	iopin_initialize();
+
+
+	iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0]));
 
 	return 0;
 }

board/ads5121/iopin.c

@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include "iopin.h"
-
-/* IO pin fields */
-#define IO_PIN_FMUX(v)	((v) << 7)	/* pin function */
-#define IO_PIN_HOLD(v)	((v) << 5)	/* hold time, pci only */
-#define IO_PIN_PUD(v)	((v) << 4)	/* if PUE, 0=pull-down, 1=pull-up */
-#define IO_PIN_PUE(v)	((v) << 3)	/* pull up/down enable */
-#define IO_PIN_ST(v)	((v) << 2)	/* schmitt trigger */
-#define IO_PIN_DS(v)	((v))		/* slew rate */
-
-static struct iopin_t {
-	int p_offset;		/* offset from IOCTL_MEM_OFFSET */
-	int nr_pins;		/* number of pins to set this way */
-	int bit_or;		/* or in the value instead of overwrite */
-	u_long val;		/* value to write or or */
-} ioregs_init[] = {
-	/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
-	{
-		IOCTL_SPDIF_TXCLK, 3, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* Set highest Slew on 9 PATA pins */
-	{
-		IOCTL_PATA_CE1, 9, 1,
-		IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
-	{
-		IOCTL_PSC0_0, 15, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC1=SPDIF_TXCLK */
-	{
-		IOCTL_LPC_CS1, 1, 0,
-		IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
-	{
-		IOCTL_I2C1_SCL, 2, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIU CLK */
-	{
-		IOCTL_PSC6_0, 1, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIU_HSYNC */
-	{
-		IOCTL_PSC6_1, 1, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	},
-	/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
-	{
-		IOCTL_PSC6_4, 26, 0,
-		IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
-		IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
-	}
-};
-
-void iopin_initialize(void)
-{
-	short i, j, n, p;
-	u_long *reg;
-	immap_t *im = (immap_t *)CFG_IMMR;
-
-	reg = (u_long *)&(im->io_ctrl.regs[0]);
-
-	if (sizeof(ioregs_init) == 0)
-		return;
-
-	n = sizeof(ioregs_init) / sizeof(ioregs_init[0]);
-
-	for (i = 0; i < n; i++) {
-		for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
-			p < ioregs_init[i].nr_pins; p++, j++) {
-			if (ioregs_init[i].bit_or)
-				reg[j] |= ioregs_init[i].val;
-			else
-				reg[j] = ioregs_init[i].val;
-		}
-	}
-	return;
-}

board/ads5121/iopin.h

@@ -1,222 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#define IOCTL_MEM		0x000
-#define IOCTL_GP		0x004
-#define IOCTL_LPC_CLK		0x008
-#define IOCTL_LPC_OE		0x00C
-#define IOCTL_LPC_RWB		0x010
-#define IOCTL_LPC_ACK		0x014
-#define IOCTL_LPC_CS0		0x018
-#define IOCTL_NFC_CE0		0x01C
-#define IOCTL_LPC_CS1		0x020
-#define IOCTL_LPC_CS2		0x024
-#define IOCTL_LPC_AX03		0x028
-#define IOCTL_EMB_AX02		0x02C
-#define IOCTL_EMB_AX01		0x030
-#define IOCTL_EMB_AX00		0x034
-#define IOCTL_EMB_AD31		0x038
-#define IOCTL_EMB_AD30		0x03C
-#define IOCTL_EMB_AD29		0x040
-#define IOCTL_EMB_AD28		0x044
-#define IOCTL_EMB_AD27		0x048
-#define IOCTL_EMB_AD26		0x04C
-#define IOCTL_EMB_AD25		0x050
-#define IOCTL_EMB_AD24		0x054
-#define IOCTL_EMB_AD23		0x058
-#define IOCTL_EMB_AD22		0x05C
-#define IOCTL_EMB_AD21		0x060
-#define IOCTL_EMB_AD20		0x064
-#define IOCTL_EMB_AD19		0x068
-#define IOCTL_EMB_AD18		0x06C
-#define IOCTL_EMB_AD17		0x070
-#define IOCTL_EMB_AD16		0x074
-#define IOCTL_EMB_AD15		0x078
-#define IOCTL_EMB_AD14		0x07C
-#define IOCTL_EMB_AD13		0x080
-#define IOCTL_EMB_AD12		0x084
-#define IOCTL_EMB_AD11		0x088
-#define IOCTL_EMB_AD10		0x08C
-#define IOCTL_EMB_AD09		0x090
-#define IOCTL_EMB_AD08		0x094
-#define IOCTL_EMB_AD07		0x098
-#define IOCTL_EMB_AD06		0x09C
-#define IOCTL_EMB_AD05		0x0A0
-#define IOCTL_EMB_AD04		0x0A4
-#define IOCTL_EMB_AD03		0x0A8
-#define IOCTL_EMB_AD02		0x0AC
-#define IOCTL_EMB_AD01		0x0B0
-#define IOCTL_EMB_AD00		0x0B4
-#define IOCTL_PATA_CE1		0x0B8
-#define IOCTL_PATA_CE2		0x0BC
-#define IOCTL_PATA_ISOLATE	0x0C0
-#define IOCTL_PATA_IOR		0x0C4
-#define IOCTL_PATA_IOW		0x0C8
-#define IOCTL_PATA_IOCHRDY	0x0CC
-#define IOCTL_PATA_INTRQ	0x0D0
-#define IOCTL_PATA_DRQ		0x0D4
-#define IOCTL_PATA_DACK		0x0D8
-#define IOCTL_NFC_WP		0x0DC
-#define IOCTL_NFC_RB		0x0E0
-#define IOCTL_NFC_ALE		0x0E4
-#define IOCTL_NFC_CLE		0x0E8
-#define IOCTL_NFC_WE		0x0EC
-#define IOCTL_NFC_RE		0x0F0
-#define IOCTL_PCI_AD31		0x0F4
-#define IOCTL_PCI_AD30		0x0F8
-#define IOCTL_PCI_AD29		0x0FC
-#define IOCTL_PCI_AD28		0x100
-#define IOCTL_PCI_AD27		0x104
-#define IOCTL_PCI_AD26		0x108
-#define IOCTL_PCI_AD25		0x10C
-#define IOCTL_PCI_AD24		0x110
-#define IOCTL_PCI_AD23		0x114
-#define IOCTL_PCI_AD22		0x118
-#define IOCTL_PCI_AD21		0x11C
-#define IOCTL_PCI_AD20		0x120
-#define IOCTL_PCI_AD19		0x124
-#define IOCTL_PCI_AD18		0x128
-#define IOCTL_PCI_AD17		0x12C
-#define IOCTL_PCI_AD16		0x130
-#define IOCTL_PCI_AD15		0x134
-#define IOCTL_PCI_AD14		0x138
-#define IOCTL_PCI_AD13		0x13C
-#define IOCTL_PCI_AD12		0x140
-#define IOCTL_PCI_AD11		0x144
-#define IOCTL_PCI_AD10		0x148
-#define IOCTL_PCI_AD09		0x14C
-#define IOCTL_PCI_AD08		0x150
-#define IOCTL_PCI_AD07		0x154
-#define IOCTL_PCI_AD06		0x158
-#define IOCTL_PCI_AD05		0x15C
-#define IOCTL_PCI_AD04		0x160
-#define IOCTL_PCI_AD03		0x164
-#define IOCTL_PCI_AD02		0x168
-#define IOCTL_PCI_AD01		0x16C
-#define IOCTL_PCI_AD00		0x170
-#define IOCTL_PCI_CBE0		0x174
-#define IOCTL_PCI_CBE1		0x178
-#define IOCTL_PCI_CBE2		0x17C
-#define IOCTL_PCI_CBE3		0x180
-#define IOCTL_PCI_GNT2		0x184
-#define IOCTL_PCI_REQ2		0x188
-#define IOCTL_PCI_GNT1		0x18C
-#define IOCTL_PCI_REQ1		0x190
-#define IOCTL_PCI_GNT0		0x194
-#define IOCTL_PCI_REQ0		0x198
-#define IOCTL_PCI_INTA		0x19C
-#define IOCTL_PCI_CLK		0x1A0
-#define IOCTL_PCI_RST_OUT	0x1A4
-#define IOCTL_PCI_FRAME		0x1A8
-#define IOCTL_PCI_IDSEL		0x1AC
-#define IOCTL_PCI_DEVSEL	0x1B0
-#define IOCTL_PCI_IRDY		0x1B4
-#define IOCTL_PCI_TRDY		0x1B8
-#define IOCTL_PCI_STOP		0x1BC
-#define IOCTL_PCI_PAR		0x1C0
-#define IOCTL_PCI_PERR		0x1C4
-#define IOCTL_PCI_SERR		0x1C8
-#define IOCTL_SPDIF_TXCLK	0x1CC
-#define IOCTL_SPDIF_TX		0x1D0
-#define IOCTL_SPDIF_RX		0x1D4
-#define IOCTL_I2C0_SCL		0x1D8
-#define IOCTL_I2C0_SDA		0x1DC
-#define IOCTL_I2C1_SCL		0x1E0
-#define IOCTL_I2C1_SDA		0x1E4
-#define IOCTL_I2C2_SCL		0x1E8
-#define IOCTL_I2C2_SDA		0x1EC
-#define IOCTL_IRQ0		0x1F0
-#define IOCTL_IRQ1		0x1F4
-#define IOCTL_CAN1_TX		0x1F8
-#define IOCTL_CAN2_TX		0x1FC
-#define IOCTL_J1850_TX		0x200
-#define IOCTL_J1850_RX		0x204
-#define IOCTL_PSC_MCLK_IN	0x208
-#define IOCTL_PSC0_0		0x20C
-#define IOCTL_PSC0_1		0x210
-#define IOCTL_PSC0_2		0x214
-#define IOCTL_PSC0_3		0x218
-#define IOCTL_PSC0_4		0x21C
-#define IOCTL_PSC1_0		0x220
-#define IOCTL_PSC1_1		0x224
-#define IOCTL_PSC1_2		0x228
-#define IOCTL_PSC1_3		0x22C
-#define IOCTL_PSC1_4		0x230
-#define IOCTL_PSC2_0		0x234
-#define IOCTL_PSC2_1		0x238
-#define IOCTL_PSC2_2		0x23C
-#define IOCTL_PSC2_3		0x240
-#define IOCTL_PSC2_4		0x244
-#define IOCTL_PSC3_0		0x248
-#define IOCTL_PSC3_1		0x24C
-#define IOCTL_PSC3_2		0x250
-#define IOCTL_PSC3_3		0x254
-#define IOCTL_PSC3_4		0x258
-#define IOCTL_PSC4_0		0x25C
-#define IOCTL_PSC4_1		0x260
-#define IOCTL_PSC4_2		0x264
-#define IOCTL_PSC4_3		0x268
-#define IOCTL_PSC4_4		0x26C
-#define IOCTL_PSC5_0		0x270
-#define IOCTL_PSC5_1		0x274
-#define IOCTL_PSC5_2		0x278
-#define IOCTL_PSC5_3		0x27C
-#define IOCTL_PSC5_4		0x280
-#define IOCTL_PSC6_0		0x284
-#define IOCTL_PSC6_1		0x288
-#define IOCTL_PSC6_2		0x28C
-#define IOCTL_PSC6_3		0x290
-#define IOCTL_PSC6_4		0x294
-#define IOCTL_PSC7_0		0x298
-#define IOCTL_PSC7_1		0x29C
-#define IOCTL_PSC7_2		0x2A0
-#define IOCTL_PSC7_3		0x2A4
-#define IOCTL_PSC7_4		0x2A8
-#define IOCTL_PSC8_0		0x2AC
-#define IOCTL_PSC8_1		0x2B0
-#define IOCTL_PSC8_2		0x2B4
-#define IOCTL_PSC8_3		0x2B8
-#define IOCTL_PSC8_4		0x2BC
-#define IOCTL_PSC9_0		0x2C0
-#define IOCTL_PSC9_1		0x2C4
-#define IOCTL_PSC9_2		0x2C8
-#define IOCTL_PSC9_3		0x2CC
-#define IOCTL_PSC9_4		0x2D0
-#define IOCTL_PSC10_0		0x2D4
-#define IOCTL_PSC10_1		0x2D8
-#define IOCTL_PSC10_2		0x2DC
-#define IOCTL_PSC10_3		0x2E0
-#define IOCTL_PSC10_4		0x2E4
-#define IOCTL_PSC11_0		0x2E8
-#define IOCTL_PSC11_1		0x2EC
-#define IOCTL_PSC11_2		0x2F0
-#define IOCTL_PSC11_3		0x2F4
-#define IOCTL_PSC11_4		0x2F8
-#define IOCTL_HRESET		0x2FC
-#define IOCTL_SRESET		0x300
-#define IOCTL_CKSTP_OUT		0x304
-#define IOCTL_USB2_VBUS_PWR_FAULT	0x308
-#define IOCTL_USB2_VBUS_PWR_SELECT	0x30C
-#define IOCTL_USB2_PHY_DRVV_BUS		0x310
-
-extern void iopin_initialize(void);

board/adsvix/Makefile

@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= adsvix.o pcmcia.o
-SOBJS	:= lowlevel_init.o pxavoltage.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################

board/adsvix/adsvix.c

@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* arch number of ADSVIX-Board */
-	gd->bd->bi_arch_number = 620;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa000003c;
-
-	return 0;
-}
-
-int board_late_init(void)
-{
-	setenv("stdout", "serial");
-	setenv("stderr", "serial");
-	return 0;
-}
-
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
-
-	return 0;
-}

board/adsvix/config.mk

@@ -1 +0,0 @@
-TEXT_BASE = 0xa1700000

board/adsvix/lowlevel_init.S

@@ -1,466 +0,0 @@
-/*
- * This was originally from the Lubbock u-boot port.
- *
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-/* wait for coprocessor write complete */
-   .macro CPWAIT reg
-   mrc	p15,0,\reg,c2,c0,0
-   mov	\reg,\reg
-   sub	pc,pc,#4
-   .endm
-
-
-/*
- *	Memory setup
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/* Set up GPIO pins first ----------------------------------------- */
-
-	ldr		r0,	=GPSR0
-	ldr		r1,	=CFG_GPSR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR1
-	ldr		r1,	=CFG_GPSR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR2
-	ldr		r1,	=CFG_GPSR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR3
-	ldr		r1,	=CFG_GPSR3_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR0
-	ldr		r1,	=CFG_GPCR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR1
-	ldr		r1,	=CFG_GPCR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR2
-	ldr		r1,	=CFG_GPCR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR3
-	ldr		r1,	=CFG_GPCR3_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR0
-	ldr		r1,	=CFG_GPDR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR1
-	ldr		r1,	=CFG_GPDR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR2
-	ldr		r1,	=CFG_GPDR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR3
-	ldr		r1,	=CFG_GPDR3_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CFG_GAFR0_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CFG_GAFR0_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CFG_GAFR1_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CFG_GAFR1_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CFG_GAFR2_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CFG_GAFR2_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR3_L
-	ldr		r1,	=CFG_GAFR3_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR3_U
-	ldr		r1,	=CFG_GAFR3_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CFG_PSSR_VAL
-	str		r1,   [r0]
-
-	/* ---------------------------------------------------------------- */
-	/* Enable memory interface					    */
-	/*								    */
-	/* The sequence below is based on the recommended init steps	    */
-	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
-	/* Chapter 10.							    */
-	/* ---------------------------------------------------------------- */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 1: Wait for at least 200 microsedonds to allow internal	    */
-	/*	   clocks to settle. Only necessary after hard reset...	    */
-	/*	   FIXME: can be optimized later			    */
-	/* ---------------------------------------------------------------- */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty	    */
-1:
-	ldr r2, [r3]
-	cmp r4, r2
-	bgt 1b
-
-mem_init:
-
-	ldr	r1,  =MEMC_BASE		/* get memory controller base addr. */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2a: Initialize Asynchronous static memory controller	    */
-	/* ---------------------------------------------------------------- */
-
-	/* MSC registers: timing, bus width, mem type			    */
-
-	/* MSC0: nCS(0,1)						    */
-	ldr	r2,   =CFG_MSC0_VAL
-	str	r2,   [r1, #MSC0_OFFSET]
-	ldr	r2,   [r1, #MSC0_OFFSET]	/* read back to ensure	    */
-						/* that data latches	    */
-	/* MSC1: nCS(2,3)						    */
-	ldr	r2,  =CFG_MSC1_VAL
-	str	r2,  [r1, #MSC1_OFFSET]
-	ldr	r2,  [r1, #MSC1_OFFSET]
-
-	/* MSC2: nCS(4,5)						    */
-	ldr	r2,  =CFG_MSC2_VAL
-	str	r2,  [r1, #MSC2_OFFSET]
-	ldr	r2,  [r1, #MSC2_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2b: Initialize Card Interface				    */
-	/* ---------------------------------------------------------------- */
-
-	/* MECR: Memory Expansion Card Register				    */
-	ldr	r2,  =CFG_MECR_VAL
-	str	r2,  [r1, #MECR_OFFSET]
-	ldr	r2,	[r1, #MECR_OFFSET]
-
-	/* MCMEM0: Card Interface slot 0 timing				    */
-	ldr	r2,  =CFG_MCMEM0_VAL
-	str	r2,  [r1, #MCMEM0_OFFSET]
-	ldr	r2,	[r1, #MCMEM0_OFFSET]
-
-	/* MCMEM1: Card Interface slot 1 timing				    */
-	ldr	r2,  =CFG_MCMEM1_VAL
-	str	r2,  [r1, #MCMEM1_OFFSET]
-	ldr	r2,	[r1, #MCMEM1_OFFSET]
-
-	/* MCATT0: Card Interface Attribute Space Timing, slot 0	    */
-	ldr	r2,  =CFG_MCATT0_VAL
-	str	r2,  [r1, #MCATT0_OFFSET]
-	ldr	r2,	[r1, #MCATT0_OFFSET]
-
-	/* MCATT1: Card Interface Attribute Space Timing, slot 1	    */
-	ldr	r2,  =CFG_MCATT1_VAL
-	str	r2,  [r1, #MCATT1_OFFSET]
-	ldr	r2,	[r1, #MCATT1_OFFSET]
-
-	/* MCIO0: Card Interface I/O Space Timing, slot 0		    */
-	ldr	r2,  =CFG_MCIO0_VAL
-	str	r2,  [r1, #MCIO0_OFFSET]
-	ldr	r2,	[r1, #MCIO0_OFFSET]
-
-	/* MCIO1: Card Interface I/O Space Timing, slot 1		    */
-	ldr	r2,  =CFG_MCIO1_VAL
-	str	r2,  [r1, #MCIO1_OFFSET]
-	ldr	r2,	[r1, #MCIO1_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2c: Write FLYCNFG  FIXME: what's that???		    */
-	/* ---------------------------------------------------------------- */
-	ldr	r2,  =CFG_FLYCNFG_VAL
-	str	r2,  [r1, #FLYCNFG_OFFSET]
-	str	r2,	[r1, #FLYCNFG_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2d: Initialize Timing for Sync Memory (SDCLK0)		    */
-	/* ---------------------------------------------------------------- */
-
-	/* Before accessing MDREFR we need a valid DRI field, so we set	    */
-	/* this to power on defaults + DRI field.			    */
-
-	ldr	r4,	[r1, #MDREFR_OFFSET]
-	ldr	r2,	=0xFFF
-	bic	r4,	r4, r2
-
-	ldr	r3,	=CFG_MDREFR_VAL
-	and	r3,	r3,  r2
-
-	orr	r4,	r4, r3
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR	    */
-
-	orr	r4,  r4, #MDREFR_K0RUN
-	orr	r4,  r4, #MDREFR_K0DB4
-	orr	r4,  r4, #MDREFR_K0FREE
-	orr	r4,  r4, #MDREFR_K0DB2
-	orr	r4,  r4, #MDREFR_K1DB2
-	bic	r4,  r4, #MDREFR_K1FREE
-	bic	r4,  r4, #MDREFR_K2FREE
-
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR	    */
-	ldr	r4,  [r1, #MDREFR_OFFSET]
-
-	/* Note: preserve the mdrefr value in r4			    */
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
-	/* ---------------------------------------------------------------- */
-
-	/* Initialize SXCNFG register. Assert the enable bits		    */
-
-	/* Write SXMRS to cause an MRS command to all enabled banks of	    */
-	/* synchronous static memory. Note that SXLCR need not be written   */
-	/* at this time.						    */
-
-	ldr	r2,  =CFG_SXCNFG_VAL
-	str	r2,  [r1, #SXCNFG_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 4: Initialize SDRAM					    */
-	/* ---------------------------------------------------------------- */
-
-	bic	r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE)
-
-	orr	r4, r4, #MDREFR_K1RUN
-	bic	r4, r4, #MDREFR_K2DB2
-	str	r4, [r1, #MDREFR_OFFSET]
-	ldr	r4, [r1, #MDREFR_OFFSET]
-
-	bic	r4, r4, #MDREFR_SLFRSH
-	str	r4, [r1, #MDREFR_OFFSET]
-	ldr	r4, [r1, #MDREFR_OFFSET]
-
-	orr	r4, r4, #MDREFR_E1PIN
-	str	r4, [r1, #MDREFR_OFFSET]
-	ldr	r4, [r1, #MDREFR_OFFSET]
-
-	nop
-	nop
-
-
-	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
-	/*	    configure but not enable each SDRAM partition pair.	    */
-
-	ldr	r4,	=CFG_MDCNFG_VAL
-	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
-	bic	r4,	r4,	#(MDCNFG_DE2|MDCNFG_DE3)
-
-	str	r4,	[r1, #MDCNFG_OFFSET]	/* write back MDCNFG	    */
-	ldr	r4,	[r1, #MDCNFG_OFFSET]
-
-
-	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,	    */
-	/*	    100..200 <20>sec.					    */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty	    */
-1:
-	    ldr r2, [r3]
-	    cmp r4, r2
-	    bgt 1b
-
-
-	/* Step 4f: Trigger a number (usually 8) refresh cycles by	    */
-	/*	    attempting non-burst read or write accesses to disabled */
-	/*	    SDRAM, as commonly specified in the power up sequence   */
-	/*	    documented in SDRAM data sheets. The address(es) used   */
-	/*	    for this purpose must not be cacheable.		    */
-
-	ldr	r3,	=CFG_DRAM_BASE
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-	str	r2,	[r3]
-
-
-	/* Step 4g: Write MDCNFG with enable bits asserted		    */
-	/*	    (MDCNFG:DEx set to 1).				    */
-
-	ldr	r3,	[r1, #MDCNFG_OFFSET]
-	mov	r4, r3
-	orr	r3,	r3,	#MDCNFG_DE0
-	str	r3,	[r1, #MDCNFG_OFFSET]
-	mov	r0, r3
-
-	/* Step 4h: Write MDMRS.					    */
-
-	ldr	r2,  =CFG_MDMRS_VAL
-	str	r2,  [r1, #MDMRS_OFFSET]
-
-	/* enable APD */
-	ldr	r3,  [r1, #MDREFR_OFFSET]
-	orr	r3,  r3,  #MDREFR_APD
-	str	r3,  [r1, #MDREFR_OFFSET]
-
-	/* We are finished with Intel's memory controller initialisation    */
-
-setvoltage:
-
-	mov	r10,	lr
-	bl	initPXAvoltage	/* In case the board is rebooting with a    */
-	mov	lr,	r10	/* low voltage raise it up to a good one.   */
-
-wakeup:
-	/* Are we waking from sleep? */
-	ldr	r0,	=RCSR
-	ldr	r1,	[r0]
-	and	r1,	r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR)
-	str	r1,	[r0]
-	teq	r1,	#RCSR_SMR
-
-	bne	initirqs
-
-	ldr	r0,	=PSSR
-	mov	r1,	#PSSR_PH
-	str	r1,	[r0]
-
-	/* if so, resume at PSPR */
-	ldr	r0,	=PSPR
-	ldr	r1,	[r0]
-	mov	pc,	r1
-
-	/* ---------------------------------------------------------------- */
-	/* Disable (mask) all interrupts at interrupt controller	    */
-	/* ---------------------------------------------------------------- */
-
-initirqs:
-
-	mov	r1,  #0		/* clear int. level register (IRQ, not FIQ) */
-	ldr	r2,  =ICLR
-	str	r1,  [r2]
-
-	ldr	r2,  =ICMR	/* mask all interrupts at the controller    */
-	str	r1,  [r2]
-
-	/* ---------------------------------------------------------------- */
-	/* Clock initialisation						    */
-	/* ---------------------------------------------------------------- */
-
-initclks:
-
-	/* Disable the peripheral clocks, and set the core clock frequency  */
-
-	/* Turn Off on-chip peripheral clocks (except for memory)	    */
-	/* for re-configuration.					    */
-	ldr	r1,  =CKEN
-	ldr	r2,  =CFG_CKEN
-	str	r2,  [r1]
-
-	/* ... and write the core clock config register			    */
-	ldr	r2,  =CFG_CCCR
-	ldr	r1,  =CCCR
-	str	r2,  [r1]
-
-	/* Turn on turbo mode */
-	mrc	p14, 0, r2, c6, c0, 0
-	orr	r2, r2, #0xB		/* Turbo, Fast-Bus, Freq change**/
-	mcr	p14, 0, r2, c6, c0, 0
-
-	/* Re-write MDREFR */
-	ldr	r1, =MEMC_BASE
-	ldr	r2, [r1, #MDREFR_OFFSET]
-	str	r2, [r1, #MDREFR_OFFSET]
-#ifdef RTC
-	/* enable the 32Khz oscillator for RTC and PowerManager		    */
-	ldr	r1,  =OSCC
-	mov	r2,  #OSCC_OON
-	str	r2,  [r1]
-
-	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL	    */
-	/* has settled.							    */
-60:
-	ldr	r2, [r1]
-	ands	r2, r2, #1
-	beq	60b
-#else
-#error "RTC not defined"
-#endif
-
-	/* Interrupt init: Mask all interrupts				    */
-    ldr r0, =ICMR /* enable no sources */
-	mov r1, #0
-    str r1, [r0]
-	/* FIXME */
-
-#ifdef NODEBUG
-	/*Disable software and data breakpoints */
-	mov	r0,#0
-	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
-	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
-	mcr	p15,0,r0,c14,c4,0  /* dbcon */
-
-	/*Enable all debug functionality */
-	mov	r0,#0x80000000
-	mcr	p14,0,r0,c10,c0,0  /* dcsr */
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* End lowlevel_init							    */
-	/* ---------------------------------------------------------------- */
-
-endlowlevel_init:
-
-	mov	pc, lr

board/adsvix/pcmcia.c

@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-void pcmcia_power_on(void)
-{
-#if 0
-	if (!(GPLR(20) & GPIO_bit(20))) { /* 3.3V */
-		GPCR(81) = GPIO_bit(81);
-		GPSR(82) = GPIO_bit(82);
-	}
-	else if (!(GPLR(21) & GPIO_bit(21))) { /* 5.0V */
-		GPCR(81) = GPIO_bit(81);
-		GPCR(82) = GPIO_bit(82);
-	}
-#else
-#warning "Board will only supply 5V, wait for next HW spin for selectable power"
-	/* 5.0V */
-	GPCR(81) = GPIO_bit(81);
-	GPCR(82) = GPIO_bit(82);
-#endif
-
-	udelay(300000);
-
-	/* reset the card */
-	GPSR(52) = GPIO_bit(52);
-
-	/* enable PCMCIA */
-	GPCR(83) = GPIO_bit(83);
-
-	/* clear reset */
-	udelay(10);
-	GPCR(52) = GPIO_bit(52);
-
-	udelay(20000);
-}
-
-void pcmcia_power_off(void)
-{
-	/* 0V */
-	GPSR(81) = GPIO_bit(81);
-	GPSR(82) = GPIO_bit(82);
-	/* disable PCMCIA */
-	GPSR(83) = GPIO_bit(83);
-}

board/adsvix/pxavoltage.S

@@ -1,230 +0,0 @@
-/*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/arch/pxa-regs.h>
-
-#define LTC1663_ADDR    0x20
-
-#define LTC1663_SY	0x01	/* Sync ACK */
-#define LTC1663_SD	0x04	/* shutdown */
-#define LTC1663_BG	0x04	/* Internal Voltage Ref */
-
-#define VOLT_1_55         18    /* DAC value for 1.55V */
-
-		.global	initPXAvoltage
-
-@ Set the voltage to 1.55V early in the boot process so we can run
-@ at a high clock speed and boot quickly.  Note that this is necessary
-@ because the reset button does not reset the CPU voltage, so if the
-@ voltage was low (say 0.85V) then the CPU would crash without this
-@ routine
-
-@ This routine clobbers r0-r4
-
-initializei2c:
-
-		ldr	r2, =CKEN
-		ldr	r3, [r2]
-		orr	r3, r3, #CKEN15_PWRI2C
-		str	r3, [r2]
-
-		ldr	r2, =PCFR
-		ldr	r3, [r2]
-		orr	r3, r3, #PCFR_PI2C_EN
-		str	r3, [r2]
-
-		/* delay for about 250msec
-		 */
-		ldr	r3, =OSCR
-		mov	r2, #0
-		str	r2, [r3]
-		ldr	r1, =0xC0000
-
-1:
-		ldr	r2, [r3]
-		cmp	r1, r2
-		bgt	1b
-		ldr	r0, =PWRICR
-		ldr	r1, [r0]
-		bic	r1, r1, #(ICR_MA | ICR_START | ICR_STOP)
-		str	r1, [r0]
-
-		orr	r1, r1, #ICR_UR
-		str	r1, [r0]
-
-		ldr	r2, =PWRISR
-		ldr	r3, =0x7ff
-		str	r3, [r2]
-
-		bic	r1, r1, #ICR_UR
-		str	r1, [r0]
-
-		mov	r1, #(ICR_GCD | ICR_SCLE)
-		str	r1, [r0]
-
-		orr	r1, r1, #ICR_IUE
-		str	r1, [r0]
-
-		orr	r1, r1, #ICR_FM
-		str	r1, [r0]
-
-		/* delay for about 1msec
-		 */
-		ldr	r3, =OSCR
-		mov	r2, #0
-		str	r2, [r3]
-		ldr	r1, =0xC00
-
-1:
-		ldr	r2, [r3]
-		cmp	r1, r2
-		bgt	1b
-		mov	pc, lr
-
-sendbytei2c:
-		ldr	r3, =PWRIDBR
-		str	r0, [r3]
-		ldr	r3, =PWRICR
-		ldr	r0, [r3]
-		orr	r0, r0, r1
-		bic	r0, r0, r2
-		str	r0, [r3]
-		orr	r0, r0, #ICR_TB
-		str	r0, [r3]
-
-		mov	r2, #0x100000
-
-waitfortxemptyi2c:
-
-		ldr	r0, =PWRISR
-		ldr	r1, [r0]
-
-		/* take it from the top if we don't get empty after a while */
-		subs	r2, r2, #1
-		moveq	lr, r4
-		beq	initPXAvoltage
-
-		tst	r1, #ISR_ITE
-
-		beq	waitfortxemptyi2c
-
-		orr	r1, r1, #ISR_ITE
-		str	r1, [r0]
-
-		mov	pc, lr
-
-initPXAvoltage:
-
-		mov	r4, lr
-
-		bl	setleds
-
-		bl	initializei2c
-
-		bl	setleds
-
-		/* now send the real message to set the correct voltage */
-		ldr	r0, =LTC1663_ADDR
-		mov	r0, r0, LSL #1
-		mov	r1, #ICR_START
-		ldr	r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK)
-		bl	sendbytei2c
-
-		bl	setleds
-
-		mov	r0, #LTC1663_BG
-		mov	r1, #0
-		mov	r2, #(ICR_STOP | ICR_START)
-		bl	sendbytei2c
-
-		bl	setleds
-
-		ldr	r0, =VOLT_1_55
-		and	r0, r0, #0xff
-		mov	r1, #0
-		mov	r2, #(ICR_STOP | ICR_START)
-		bl	sendbytei2c
-
-		bl	setleds
-
-		ldr	r0, =VOLT_1_55
-		mov	r0, r0, ASR #8
-		and	r0, r0, #0xff
-		mov	r1, #ICR_STOP
-		mov	r2, #ICR_START
-		bl	sendbytei2c
-
-		bl	setleds
-
-		@ delay a little for the volatage to stablize
-		ldr	r3, =OSCR
-		mov	r2, #0
-		str	r2, [r3]
-		ldr	r1, =0xC0
-
-1:
-		ldr	r2, [r3]
-		cmp	r1, r2
-		bgt	1b
-		mov	pc, r4
-
-setleds:
-	mov		pc, lr
-
-	ldr		r5, =0x40e00058
-	ldr		r3, [r5]
-	bic		r3, r3, #0x3
-	str		r3, [r5]
-	ldr		r5, =0x40e0000c
-	ldr		r3, [r5]
-	orr		r3, r3, #0x00010000
-	str		r3, [r5]
-
-	@ inner loop
-	mov		r0, #0x2
-1:
-
-	ldr		r5, =0x40e00018
-	mov		r3, #0x00010000
-	str		r3, [r5]
-
-	@ outer loop
-	mov		r3, #0x00F00000
-2:
-	subs		r3, r3, #1
-	bne		2b
-
-	ldr		r5, =0x40e00024
-	mov		r3, #0x00010000
-	str		r3, [r5]
-
-	@ outer loop
-	mov		r3, #0x00F00000
-3:
-	subs		r3, r3, #1
-	bne		3b
-
-	subs		r0, r0, #1
-	bne		1b
-
-	mov		pc, lr

board/amcc/sequoia/sequoia.c

@@ -93,6 +93,11 @@ int board_early_init_f(void)
 #ifdef CONFIG_I2C_MULTI_BUS
 	sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL);
 #endif
+	/* Two UARTs, so we need 4-pin mode.  Also, we want CTS/RTS mode. */
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_CTS_RTS;
+	sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_CTS_RTS;
+
 	mfsdr(SDR0_PFC2, sdr0_pfc2);
 	sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
 		SDR0_PFC2_SELECT_CONFIG_4;

board/atmel/atngw100/atngw100.c

@@ -81,7 +81,7 @@ phys_size_t initdram(int board_type)
 	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
 
 	if (expected_size != actual_size)
-		printf("Warning: Only %u of %u MiB SDRAM is working\n",
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
 				actual_size >> 20, expected_size >> 20);
 
 	return actual_size;

board/atmel/atstk1000/atstk1000.c

@@ -104,7 +104,7 @@ phys_size_t initdram(int board_type)
 	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
 
 	if (expected_size != actual_size)
-		printf("Warning: Only %u of %u MiB SDRAM is working\n",
+		printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
 				actual_size >> 20, expected_size >> 20);
 
 	return actual_size;

board/atmel/atstk1000/flash.c

@@ -70,7 +70,7 @@ unsigned long flash_init(void)
 
 void flash_print_info(flash_info_t *info)
 {
-	printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n",
+	printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n",
 	       info->flash_id >> 16, info->flash_id & 0xffff);
 	printf("Size: %ld MB in %d sectors\n",
 	       info->size >> 10, info->sector_count);

board/esd/common/flash.c

@@ -22,7 +22,9 @@
  */
 
 #include <common.h>
+#ifdef __PPC__
 #include <ppc4xx.h>
+#endif
 #include <asm/processor.h>
 
 flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/

board/freescale/m5275evb/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-OBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o mii.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/freescale/mpc8540ads/u-boot.lds

@@ -2,6 +2,8 @@
  * (C) Copyright 2002,2003, Motorola,Inc.
  * Xianghua Xiao, X.Xiao@motorola.com.
  *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -24,18 +26,14 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -62,21 +60,10 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    cpu/mpc85xx/start.o	(.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -85,7 +72,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -134,6 +121,18 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
   __bss_start = .;
   .bss (NOLOAD)       :
   {
@@ -141,7 +140,9 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
+
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }

board/freescale/mpc8541cds/u-boot.lds

@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2008 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,18 +23,14 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -61,22 +57,10 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    cpu/mpc85xx/start.o	(.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    drivers/net/tsec.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -85,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -134,6 +118,18 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
   __bss_start = .;
   .bss (NOLOAD)       :
   {
@@ -141,7 +137,9 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
+
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }

board/freescale/mpc8544ds/u-boot.lds

@@ -1,5 +1,5 @@
 /*
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007-2008 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,18 +23,14 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -61,21 +57,10 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    cpu/mpc85xx/start.o	(.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    drivers/bios_emulator/atibios.o (.text)
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -84,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -133,6 +118,18 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
   __bss_start = .;
   .bss (NOLOAD)       :
   {
@@ -140,7 +137,9 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
+
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }

board/freescale/mpc8548cds/u-boot.lds

@@ -1,5 +1,5 @@
 /*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007-2008 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,18 +23,14 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -61,21 +57,10 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    cpu/mpc85xx/start.o	(.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    drivers/net/tsec.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -84,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -133,6 +118,18 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
   __bss_start = .;
   .bss (NOLOAD)       :
   {
@@ -140,7 +137,9 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
+
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }

board/freescale/mpc8555cds/u-boot.lds

@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2008 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,18 +23,14 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -61,22 +57,10 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    cpu/mpc85xx/start.o	(.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    drivers/net/tsec.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -85,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -134,6 +118,18 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
   __bss_start = .;
   .bss (NOLOAD)       :
   {
@@ -141,7 +137,9 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
+
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }

board/freescale/mpc8560ads/u-boot.lds

@@ -1,7 +1,9 @@
 /*
- * (C) Copyright 2002,2003,Motorola,Inc.
+ * (C) Copyright 2002,2003, Motorola,Inc.
  * Xianghua Xiao, X.Xiao@motorola.com.
  *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -24,18 +26,14 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
+
 SECTIONS
 {
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -62,24 +60,10 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    cpu/mpc85xx/start.o	(.text)
-    cpu/mpc85xx/commproc.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/serial_scc.o (.text)
-    cpu/mpc85xx/ether_fcc.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/spd_sdram.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -88,7 +72,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -137,6 +121,18 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
   __bss_start = .;
   .bss (NOLOAD)       :
   {
@@ -144,7 +140,9 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
+
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }

board/freescale/mpc8568mds/u-boot.lds

@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor.
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -23,21 +23,14 @@
 OUTPUT_ARCH(powerpc)
 /* Do we need any of these for elf?
    __DYNAMIC = 0;    */
+PHDRS
+{
+  text PT_LOAD;
+  bss PT_LOAD;
+}
 
 SECTIONS
 {
- /* ELIOR - From RAM:  From FLASH: 0xFFFFFFFC*/
-  .resetvec 0xFFFFFFFC:
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  /*(ELIOR - From RAM:  From FLASH: 0xFFFFF000*/
-  .bootpg 0xFFFFF000:
-  {
-	cpu/mpc85xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -64,21 +57,10 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    cpu/mpc85xx/start.o	(.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
     *(.text)
     *(.fixup)
     *(.got1)
-   }
+   } :text
     _etext = .;
     PROVIDE (etext = .);
     .rodata    :
@@ -87,7 +69,7 @@ SECTIONS
     *(.rodata1)
     *(.rodata.str1.4)
     *(.eh_frame)
-  }
+  } :text
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
@@ -136,6 +118,18 @@ SECTIONS
   . = ALIGN(256);
   __init_end = .;
 
+  .bootpg ADDR(.text) + 0x7f000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+  } :text = 0xffff
+
+  .resetvec ADDR(.text) + 0x7fffc :
+  {
+    *(.resetvec)
+  } :text = 0xffff
+
+  . = ADDR(.text) + 0x80000;
+
   __bss_start = .;
   .bss (NOLOAD)       :
   {
@@ -143,7 +137,9 @@ SECTIONS
    *(.dynbss)
    *(.bss)
    *(COMMON)
-  }
+  } :bss
+
+  . = ALIGN(4);
   _end = . ;
   PROVIDE (end = .);
 }

board/idmr/mii.c

@@ -200,7 +200,7 @@ int mii_discover_phy(struct eth_device *dev)
 }
 #endif				/* CFG_DISCOVER_PHY */
 
-int mii_init(void) __attribute__((weak,alias("__mii_init")));
+void mii_init(void) __attribute__((weak,alias("__mii_init")));
 
 void __mii_init(void)
 {

board/ids8247/ids8247.c

@@ -321,7 +321,7 @@ nand_init (void)
 	printf ("%4lu MB\n", totlen >>20);
 }
 
-#endif	/* CFG_CMD_NAND */
+#endif	/* CONFIG_CMD_NAND */
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 /*

board/imx31_litekit/imx31_litekit.c

@@ -50,16 +50,16 @@ int board_init (void)
 	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
 	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
 	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
 
 	/* SPI2 */
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS2);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SCLK);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SPI_RDY);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MOSI);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MISO);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS0);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS1);
+	mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
+	mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+	mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+	mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+	mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+	mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+	mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
 
 	/* start SPI2 clock */
 	__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);

board/imx31_phycore/imx31_phycore.c

@@ -54,11 +54,11 @@ int board_init (void)
 	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
 	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
 	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
 
 	/* setup pins for I2C2 (for EEPROM, RTC) */
 	mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
-	mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SCL);
+	mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SDA);
 
 	gd->bd->bi_arch_number = 447;		/* board id for linux */
 	gd->bd->bi_boot_params = (0x80000100);	/* adress of boot parameters */

board/matrix_vision/mvbc_p/mvbc_p.c

@@ -32,6 +32,7 @@
 #include <malloc.h>
 #include <pci.h>
 #include <i2c.h>
+#include <fpga.h>
 #include <environment.h>
 #include <fdt_support.h>
 #include <asm/io.h>
@@ -109,7 +110,7 @@ void mvbc_init_gpio(void)
 	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
 
 	printf("Ports : 0x%08x\n", gpio->port_config);
-	printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
+	printf("PORCFG: 0x%08lx\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
 
 	out_be32(&gpio->simple_ddr, SIMPLE_DDR);
 	out_be32(&gpio->simple_dvo, SIMPLE_DVO);

board/mx31ads/mx31ads.c

@@ -55,16 +55,16 @@ int board_init (void)
 	mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
 	mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
 	mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
-	mx31_gpio_mux(MUX_RTS1__UART1_CTS_B);
+	mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
 
 	/* SPI2 */
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS2);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SCLK);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SPI_RDY);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MOSI);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_MISO);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS0);
-	mx31_gpio_mux((MUX_CTL_FUNC << 8) | MUX_CTL_CSPI2_SS1);
+	mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
+	mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+	mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+	mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+	mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+	mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+	mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
 
 	/* start SPI2 clock */
 	__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);

board/tqc/tqm85xx/tqm85xx.c

@@ -464,7 +464,8 @@ void local_bus_init (void)
 
 	if (lbc_mhz < 66) {
 		lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */
-		lbc->ltedr = 0xa4c80000;	/* DK: !!! */
+		lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA |
+			     LTEDR_RAWA | LTEDR_CSD;	/* Disable all error checking */
 
 	} else if (lbc_mhz >= 133) {
 		lbc->lcrr = CFG_LBC_LCRR & (~LCRR_DBYP);	/* DLL Enabled */

board/w7o/post2.c

@@ -29,6 +29,12 @@
 #include "errors.h"
 #include "dtt.h"
 
+/* for LM75 DTT POST test */
+#define DTT_READ_TEMP		0x0
+#define DTT_CONFIG		0x1
+#define DTT_TEMP_HYST		0x2
+#define DTT_TEMP_SET		0x3
+
 #if defined(CONFIG_RTC_M48T35A)
 void rtctest(void)
 {

common/cmd_bdinfo.c

@@ -205,7 +205,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	puts ("\nip_addr     = ");
 	print_IPaddr (bd->bi_ip_addr);
 #endif
-	printf ("\nbaudrate    = %d bps\n", (ulong)bd->bi_baudrate);
+	printf ("\nbaudrate    = %ld bps\n", (ulong)bd->bi_baudrate);
 	return 0;
 }
 

common/cmd_bootm.c

@@ -36,7 +36,7 @@
 #include <lmb.h>
 #include <asm/byteorder.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_USB)
+#if defined(CONFIG_CMD_USB)
 #include <usb.h>
 #endif
 
@@ -138,7 +138,6 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	memset ((void *)&images, 0, sizeof (images));
 	images.verify = getenv_yesno ("verify");
-	images.autostart = getenv_yesno ("autostart");
 	images.lmb = &lmb;
 
 	lmb_init(&lmb);
@@ -217,7 +216,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 	iflag = disable_interrupts();
 
-#if (CONFIG_COMMANDS & CFG_CMD_USB)
+#if defined(CONFIG_CMD_USB)
 	/*
 	 * turn off USB to prevent the host controller from writing to the
 	 * SDRAM while Linux is booting. This could happen (at least for OHCI
@@ -251,10 +250,9 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 			memmove_wd ((void *)load_start,
 				   (void *)os_data, os_len, CHUNKSZ);
-
-			load_end = load_start + os_len;
-			puts("OK\n");
 		}
+		load_end = load_start + os_len;
+		puts("OK\n");
 		break;
 	case IH_COMP_GZIP:
 		printf ("   Uncompressing %s ... ", type_name);
@@ -363,10 +361,9 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	show_boot_progress (-9);
 #ifdef DEBUG
 	puts ("\n## Control returned to monitor - resetting...\n");
-	if (images.autostart)
-		do_reset (cmdtp, flag, argc, argv);
+	do_reset (cmdtp, flag, argc, argv);
 #endif
-	if (!images.autostart && iflag)
+	if (iflag)
 		enable_interrupts();
 
 	return 1;

common/cmd_flash.c

@@ -342,7 +342,7 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			puts ("Bad sector specification\n");
 			return 1;
 		}
-		printf ("Erase Flash Sectors %d-%d in Bank # %d ",
+		printf ("Erase Flash Sectors %d-%d in Bank # %zu ",
 			sect_first, sect_last, (info-flash_info)+1);
 		rcode = flash_erase(info, sect_first, sect_last);
 		return rcode;
@@ -534,7 +534,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			puts ("Bad sector specification\n");
 			return 1;
 		}
-		printf("%sProtect Flash Sectors %d-%d in Bank # %d\n",
+		printf("%sProtect Flash Sectors %d-%d in Bank # %zu\n",
 			p ? "" : "Un-", sect_first, sect_last,
 			(info-flash_info)+1);
 		for (i = sect_first; i <= sect_last; i++) {

common/cmd_ide.c

@@ -161,8 +161,6 @@ static uchar ide_wait  (int dev, ulong t);
 
 #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
 
-void inline ide_outb(int dev, int port, unsigned char val);
-unsigned char inline ide_inb(int dev, int port);
 static void input_data(int dev, ulong *sect_buf, int words);
 static void output_data(int dev, ulong *sect_buf, int words);
 static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
@@ -298,7 +296,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		ulong addr = simple_strtoul(argv[2], NULL, 16);
 		ulong cnt  = simple_strtoul(argv[4], NULL, 16);
 		ulong n;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CFG_64BIT_LBA
 		lbaint_t blk  = simple_strtoull(argv[3], NULL, 16);
 
 		printf ("\nIDE read: device %d block # %qd, count %ld ... ",
@@ -327,7 +325,7 @@ int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		ulong addr = simple_strtoul(argv[2], NULL, 16);
 		ulong cnt  = simple_strtoul(argv[4], NULL, 16);
 		ulong n;
-#ifdef CFG_64BIT_STRTOUL
+#ifdef CFG_64BIT_LBA
 		lbaint_t blk  = simple_strtoull(argv[3], NULL, 16);
 
 		printf ("\nIDE write: device %d block # %qd, count %ld ... ",
@@ -523,6 +521,28 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 /* ------------------------------------------------------------------------- */
 
+void inline
+__ide_outb(int dev, int port, unsigned char val)
+{
+	debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
+		dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+	outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+}
+void inline ide_outb (int dev, int port, unsigned char val)
+		__attribute__((weak, alias("__ide_outb")));
+
+unsigned char inline
+__ide_inb(int dev, int port)
+{
+	uchar val;
+	val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+	debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
+		dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
+	return val;
+}
+unsigned char inline ide_inb(int dev, int port)
+			__attribute__((weak, alias("__ide_inb")));
+
 void ide_init (void)
 {
 
@@ -817,28 +837,6 @@ set_pcmcia_timing (int pmode)
 
 /* ------------------------------------------------------------------------- */
 
-void inline
-__ide_outb(int dev, int port, unsigned char val)
-{
-	debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
-		dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
-	outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
-}
-void inline ide_outb (int dev, int port, unsigned char val)
-		__attribute__((weak, alias("__ide_outb")));
-
-unsigned char inline
-__ide_inb(int dev, int port)
-{
-	uchar val;
-	val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
-	debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
-		dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
-	return val;
-}
-unsigned char inline ide_inb(int dev, int port)
-			__attribute__((weak, alias("__ide_inb")));
-
 #ifdef __PPC__
 # ifdef CONFIG_AMIGAONEG3SE
 static void

common/cmd_load.c

@@ -424,7 +424,6 @@ write_record (char *buf)
 #define untochar(x) ((int) (((x) - SPACE) & 0xff))
 
 extern int os_data_count;
-extern int os_data_header[8];
 
 static void set_kerm_bin_mode(unsigned long *);
 static int k_recv(void);
@@ -631,11 +630,6 @@ void send_nack (int n)
 }
 
 
-/* os_data_* takes an OS Open image and puts it into memory, and
-   puts the boot header in an array named os_data_header
-
-   if image is binary, no header is stored in os_data_header.
-*/
 void (*os_data_init) (void);
 void (*os_data_char) (char new_char);
 static int os_data_state, os_data_state_saved;
@@ -643,25 +637,28 @@ int os_data_count;
 static int os_data_count_saved;
 static char *os_data_addr, *os_data_addr_saved;
 static char *bin_start_address;
-int os_data_header[8];
+
 static void bin_data_init (void)
 {
 	os_data_state = 0;
 	os_data_count = 0;
 	os_data_addr = bin_start_address;
 }
+
 static void os_data_save (void)
 {
 	os_data_state_saved = os_data_state;
 	os_data_count_saved = os_data_count;
 	os_data_addr_saved = os_data_addr;
 }
+
 static void os_data_restore (void)
 {
 	os_data_state = os_data_state_saved;
 	os_data_count = os_data_count_saved;
 	os_data_addr = os_data_addr_saved;
 }
+
 static void bin_data_char (char new_char)
 {
 	switch (os_data_state) {
@@ -671,6 +668,7 @@ static void bin_data_char (char new_char)
 		break;
 	}
 }
+
 static void set_kerm_bin_mode (unsigned long *addr)
 {
 	bin_start_address = (char *) addr;
@@ -686,16 +684,19 @@ void k_data_init (void)
 	k_data_escape = 0;
 	os_data_init ();
 }
+
 void k_data_save (void)
 {
 	k_data_escape_saved = k_data_escape;
 	os_data_save ();
 }
+
 void k_data_restore (void)
 {
 	k_data_escape = k_data_escape_saved;
 	os_data_restore ();
 }
+
 void k_data_char (char new_char)
 {
 	if (k_data_escape) {

common/cmd_mfsl.c

@@ -183,7 +183,7 @@ int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 
-	printf ("%01x: 0x%08lx - %s %s read\n", fslnum, num,
+	printf ("%01x: 0x%08x - %s %s read\n", fslnum, num,
 		blocking < 2  ? "non blocking" : "blocking",
 		((blocking == 1) || (blocking == 3)) ? "control" : "data" );
 	return 0;
@@ -341,7 +341,7 @@ int do_fwr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 
-	printf ("%01x: 0x%08lx - %s %s write\n", fslnum, num,
+	printf ("%01x: 0x%08x - %s %s write\n", fslnum, num,
 		blocking < 2  ? "non blocking" : "blocking",
 		((blocking == 1) || (blocking == 3)) ? "control" : "data" );
 	return 0;
@@ -382,7 +382,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		puts ("Unsupported register\n");
 		return 1;
 	}
-	printf (": 0x%08lx\n", val);
+	printf (": 0x%08x\n", val);
 	return 0;
 }
 

common/cmd_mp.c

@@ -34,9 +34,9 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	cpuid = simple_strtoul(argv[1], NULL, 10);
-	if (cpuid >= CONFIG_NR_CPUS) {
+	if (cpuid >= CONFIG_NUM_CPUS) {
 		printf ("Core num: %lu is out of range[0..%d]\n",
-				cpuid, CONFIG_NR_CPUS - 1);
+				cpuid, CONFIG_NUM_CPUS - 1);
 		return 1;
 	}
 

common/cmd_onenand.c

@@ -58,8 +58,6 @@ int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			} else {
 				start = simple_strtoul(argv[2], NULL, 10);
 				end = simple_strtoul(argv[3], NULL, 10);
-				start -= (unsigned long)onenand_chip.base;
-				end -= (unsigned long)onenand_chip.base;
 
 				start >>= onenand_chip.erase_shift;
 				end >>= onenand_chip.erase_shift;
@@ -92,8 +90,6 @@ int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			size_t retlen = 0;
 			int oob = strncmp(argv[1], "read.oob", 8) ? 0 : 1;
 
-			ofs -= (unsigned long)onenand_chip.base;
-
 			if (oob)
 				onenand_read_oob(&onenand_mtd, ofs, len,
 						 &retlen, (u_char *) addr);
@@ -111,8 +107,6 @@ int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 			size_t len = simple_strtoul(argv[4], NULL, 16);
 			size_t retlen = 0;
 
-			ofs -= (unsigned long)onenand_chip.base;
-
 			onenand_write(&onenand_mtd, ofs, len, &retlen,
 				      (u_char *) addr);
 			printf("Done\n");

common/dlmalloc.c

@@ -1457,7 +1457,7 @@ typedef struct malloc_chunk* mbinptr;
    indexing, maintain locality, and avoid some initialization tests.
 */
 
-#define top            (bin_at(0)->fd)   /* The topmost chunk */
+#define top            (av_[2])          /* The topmost chunk */
 #define last_remainder (bin_at(1))       /* remainder from last split */
 
 
@@ -1552,13 +1552,14 @@ void malloc_bin_reloc (void)
 
 #define BINBLOCKWIDTH     4   /* bins per block */
 
-#define binblocks      (bin_at(0)->size) /* bitvector of nonempty blocks */
+#define binblocks_r     ((INTERNAL_SIZE_T)av_[1]) /* bitvector of nonempty blocks */
+#define binblocks_w     (av_[1])
 
 /* bin<->block macros */
 
 #define idx2binblock(ix)    ((unsigned)1 << (ix / BINBLOCKWIDTH))
-#define mark_binblock(ii)   (binblocks |= idx2binblock(ii))
-#define clear_binblock(ii)  (binblocks &= ~(idx2binblock(ii)))
+#define mark_binblock(ii)   (binblocks_w = (mbinptr)(binblocks_r | idx2binblock(ii)))
+#define clear_binblock(ii)  (binblocks_w = (mbinptr)(binblocks_r & ~(idx2binblock(ii))))
 
 
 
@@ -2250,17 +2251,17 @@ Void_t* mALLOc(bytes) size_t bytes;
      search for best fitting chunk by scanning bins in blockwidth units.
   */
 
-  if ( (block = idx2binblock(idx)) <= binblocks)
+  if ( (block = idx2binblock(idx)) <= binblocks_r)
   {
 
     /* Get to the first marked block */
 
-    if ( (block & binblocks) == 0)
+    if ( (block & binblocks_r) == 0)
     {
       /* force to an even block boundary */
       idx = (idx & ~(BINBLOCKWIDTH - 1)) + BINBLOCKWIDTH;
       block <<= 1;
-      while ((block & binblocks) == 0)
+      while ((block & binblocks_r) == 0)
       {
 	idx += BINBLOCKWIDTH;
 	block <<= 1;
@@ -2315,7 +2316,7 @@ Void_t* mALLOc(bytes) size_t bytes;
       {
 	if ((startidx & (BINBLOCKWIDTH - 1)) == 0)
 	{
-	  binblocks &= ~block;
+	  av_[1] = (mbinptr)(binblocks_r & ~block);
 	  break;
 	}
 	--startidx;
@@ -2324,9 +2325,9 @@ Void_t* mALLOc(bytes) size_t bytes;
 
       /* Get to the next possibly nonempty block */
 
-      if ( (block <<= 1) <= binblocks && (block != 0) )
+      if ( (block <<= 1) <= binblocks_r && (block != 0) )
       {
-	while ((block & binblocks) == 0)
+	while ((block & binblocks_r) == 0)
 	{
 	  idx += BINBLOCKWIDTH;
 	  block <<= 1;

common/env_onenand.c

@@ -66,7 +66,6 @@ void env_relocate_spec(void)
 	size_t retlen;
 
 	env_addr = CFG_ENV_ADDR;
-	env_addr -= (unsigned long) onenand_chip.base;
 
 	/* Check OneNAND exist */
 	if (onenand_mtd.oobblock)
@@ -101,7 +100,6 @@ int saveenv(void)
 
 	instr.len = CFG_ENV_SIZE;
 	instr.addr = env_addr;
-	instr.addr -= (unsigned long)onenand_chip.base;
 	if (onenand_erase(&onenand_mtd, &instr)) {
 		printf("OneNAND: erase failed at 0x%08lx\n", env_addr);
 		return 1;
@@ -111,7 +109,6 @@ int saveenv(void)
 	env_ptr->crc =
 	    crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd));
 
-	env_addr -= (unsigned long)onenand_chip.base;
 	if (onenand_write(&onenand_mtd, env_addr, onenand_mtd.oobblock, &retlen,
 	     (u_char *) env_ptr)) {
 		printf("OneNAND: write failed at 0x%08x\n", instr.addr);

common/image.c

@@ -189,7 +189,6 @@ int image_check_dcrc (image_header_t *hdr)
 	return (dcrc == image_get_dcrc (hdr));
 }
 
-
 /**
  * image_multi_count - get component (sub-image) count
  * @hdr: pointer to the header of the multi component image
@@ -833,7 +832,7 @@ int boot_get_ramdisk (int argc, char *argv[], bootm_headers_t *images,
 			rd_noffset = fit_conf_get_ramdisk_node (fit_hdr, cfg_noffset);
 			if (rd_noffset < 0) {
 				debug ("*  ramdisk: no ramdisk in config\n");
-				return 1;
+				return 0;
 			}
 		}
 #endif

common/lcd.c

@@ -678,6 +678,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 		/* Set color map */
 		for (i=0; i<colors; ++i) {
 			bmp_color_table_entry_t cte = bmp->color_table[i];
+#if !defined(CONFIG_ATMEL_LCD)
 			ushort colreg =
 				( ((cte.red)   << 8) & 0xf800) |
 				( ((cte.green) << 3) & 0x07e0) |
@@ -691,6 +692,9 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 			cmap++;
 #elif defined(CONFIG_MPC823)
 			cmap--;
+#endif
+#else /* CONFIG_ATMEL_LCD */
+			lcd_setcolreg(i, cte.red, cte.green, cte.blue);
 #endif
 		}
 	}
@@ -727,7 +731,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	for (i = 0; i < height; ++i) {
 		WATCHDOG_RESET();
 		for (j = 0; j < width ; j++)
-#if defined(CONFIG_PXA250)
+#if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD)
 			*(fb++) = *(bmap++);
 #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
 			*(fb++)=255-*(bmap++);
@@ -740,6 +744,9 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 }
 #endif
 
+#ifdef CONFIG_VIDEO_BMP_GZIP
+extern bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp);
+#endif
 
 static void *lcd_logo (void)
 {
@@ -761,6 +768,16 @@ static void *lcd_logo (void)
 		addr = simple_strtoul(s, NULL, 16);
 		do_splash = 0;
 
+#ifdef CONFIG_VIDEO_BMP_GZIP
+		bmp_image_t *bmp = (bmp_image_t *)addr;
+		unsigned long len;
+
+		if (!((bmp->header.signature[0]=='B') &&
+		      (bmp->header.signature[1]=='M'))) {
+			addr = (ulong)gunzip_bmp(addr, &len);
+		}
+#endif
+
 		if (lcd_display_bitmap (addr, 0, 0) == 0) {
 			return ((void *)lcd_base);
 		}
@@ -776,7 +793,7 @@ static void *lcd_logo (void)
 	sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
 	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, (uchar *)info, strlen(info));
 
-	sprintf (info, "(C) 2004 DENX Software Engineering");
+	sprintf (info, "(C) 2008 DENX Software Engineering GmbH");
 	lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT,
 					(uchar *)info, strlen(info));
 

common/main.c

@@ -116,7 +116,7 @@ static __inline__ int abortboot(int bootdelay)
 	u_int i;
 
 #  ifdef CONFIG_AUTOBOOT_PROMPT
-	printf(CONFIG_AUTOBOOT_PROMPT, bootdelay);
+	printf(CONFIG_AUTOBOOT_PROMPT);
 #  endif
 
 #  ifdef CONFIG_AUTOBOOT_DELAY_STR
@@ -212,7 +212,7 @@ static __inline__ int abortboot(int bootdelay)
 	int abort = 0;
 
 #ifdef CONFIG_MENUPROMPT
-	printf(CONFIG_MENUPROMPT, bootdelay);
+	printf(CONFIG_MENUPROMPT);
 #else
 	printf("Hit any key to stop autoboot: %2d ", bootdelay);
 #endif

cpu/arm1136/mx31/generic.c

@@ -81,12 +81,12 @@ void mx31_gpio_mux(unsigned long mode)
 {
 	unsigned long reg, shift, tmp;
 
-	reg = IOMUXC_BASE + (mode & 0xfc);
+	reg = IOMUXC_BASE + (mode & 0x1fc);
 	shift = (~mode & 0x3) * 8;
 
 	tmp = __REG(reg);
 	tmp &= ~(0xff << shift);
-	tmp |= ((mode >> 8) & 0xff) << shift;
+	tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
 	__REG(reg) = tmp;
 }
 

cpu/microblaze/interrupts.c

@@ -203,7 +203,7 @@ int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 	for (i = 0; i < CFG_INTC_0_NUM; i++) {
 		if (act->handler != (interrupt_handler_t*) def_hdlr) {
-			printf ("%02d  %08lx  %08lx  %d\n", i,
+			printf ("%02d  %08x  %08x  %d\n", i,
 				(int)act->handler, (int)act->arg, act->count);
 		}
 		act++;

cpu/mips/au1x00_serial.c

@@ -76,7 +76,7 @@ void serial_setbrg (void)
 	sd = (*sys_powerctrl & 0x03) + 2;
 
 	/* calulate 2x baudrate and round */
-	divisorx2 = ((CFG_HZ/(sd * 16 * CONFIG_BAUDRATE)));
+	divisorx2 = ((CFG_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE)));
 
 	if (divisorx2 & 0x01)
 		divisorx2 = divisorx2 + 1;

cpu/mpc512x/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o
+COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

cpu/mpc512x/cpu.c

@@ -131,22 +131,67 @@ void watchdog_reset (void)
 #endif
 
 #ifdef CONFIG_OF_LIBFDT
-void ft_cpu_setup(void *blob, bd_t *bd)
+
+#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+/*
+ * fdt setup for old device trees
+ * fix up
+ * 	cpu clocks
+ * 	soc clocks
+ * 	ethernet addresses
+ */
+static void old_ft_cpu_setup(void *blob, bd_t *bd)
 {
-	char *cpu_path = "/cpus/" OF_CPU;
-	char *eth_path = "/" OF_SOC "/ethernet@2800";
-	char *eth_path_old = "/" OF_SOC_OLD "/ethernet@2800";
+	/*
+	 * avoid fixing up by path because that
+	 * produces scary error messages
+	 */
 
-	do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
-	do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
-	do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
-	do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipsfreq, 1);
-	do_fixup_by_path(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0);
-
-	/* this is so old kernels with old device trees will boot */
-	do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0);
-	do_fixup_by_path(blob, eth_path_old, "local-mac-address",
-			bd->bi_enetaddr, 6, 0);
-	do_fixup_by_path(blob, eth_path_old, "address", bd->bi_enetaddr, 6, 0);
+	/*
+	 * old device trees have ethernet nodes with
+	 * device_type = "network"
+	 */
+	do_fixup_by_prop(blob, "device_type", "network", 8,
+		"local-mac-address", bd->bi_enetaddr, 6, 0);
+	do_fixup_by_prop(blob, "device_type", "network", 8,
+		"address", bd->bi_enetaddr, 6, 0);
+	/*
+	 * old device trees have soc nodes with
+	 * device_type = "soc"
+	 */
+	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+		"bus-frequency", bd->bi_ipsfreq, 0);
+}
+#endif
+
+static void ft_clock_setup(void *blob, bd_t *bd)
+{
+	char *cpu_path = "/cpus/" OF_CPU;
+
+	/*
+	 * fixup cpu clocks using path
+	 */
+	do_fixup_by_path_u32(blob, cpu_path,
+		"timebase-frequency", OF_TBCLK, 1);
+	do_fixup_by_path_u32(blob, cpu_path,
+		"bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_path_u32(blob, cpu_path,
+		"clock-frequency", bd->bi_intfreq, 1);
+	/*
+	 * fixup soc clocks using compatible
+	 */
+	do_fixup_by_compat_u32(blob, OF_SOC_COMPAT,
+		"bus-frequency", bd->bi_ipsfreq, 1);
+}
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
+	old_ft_cpu_setup(blob, bd);
+#endif
+	ft_clock_setup(blob, bd);
+#ifdef CONFIG_HAS_ETH0
+	fdt_fixup_ethernet(blob, bd);
+#endif
 }
 #endif

cpu/mpc512x/iopin.c

@@ -1,7 +1,7 @@
 /*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
+ * (C) Copyright 2008
+ * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
+ * mpc512x I/O pin/pad initialization for the ADS5121 board
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -21,36 +21,29 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
+#include <common.h>
+#include <linux/types.h>
+#include <mpc512x.h>
+
+void iopin_initialize(iopin_t *ioregs_init, int len)
 {
-	. = 0x00000000;
+	short i, j, p;
+	u_long *reg;
+	immap_t *im = (immap_t *)CFG_IMMR;
 
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/pxa/start.o	(.text)
-	  *(.text)
+	reg = (u_long *)&(im->io_ctrl.regs[0]);
+
+	if (sizeof(ioregs_init) == 0)
+		return;
+
+	for (i = 0; i < len; i++) {
+		for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
+			p < ioregs_init[i].nr_pins; p++, j++) {
+			if (ioregs_init[i].bit_or)
+				reg[j] |= ioregs_init[i].val;
+			else
+				reg[j] = ioregs_init[i].val;
+		}
 	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) }
-	_end = .;
+	return;
 }

cpu/mpc8260/pci.c

@@ -457,7 +457,7 @@ void pci_mpc8250_init (struct pci_controller *hose)
 void ft_pci_setup(void *blob, bd_t *bd)
 {
 	do_fixup_by_prop_u32(blob, "device_type", "pci", 4,
-		"clock-frequency", bd->pci_clk, 1);
+		"clock-frequency", gd->pci_clk, 1);
 }
 #endif
 

cpu/mpc8260/speed.c

@@ -162,6 +162,30 @@ int get_clocks (void)
 		gd->cpu_clk = clkin;
 	}
 
+#ifdef CONFIG_PCI
+	gd->pci_clk = clkin;
+
+	if (sccr & SCCR_PCI_MODE) {
+		uint pci_div;
+		uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
+
+		if (sccr & SCCR_PCI_MODCK) {
+			pci_div = 2;
+			if (pcidf == 9) {
+				pci_div *= 5;
+			} else if (pcidf == 0xB) {
+				pci_div *= 6;
+			} else {
+				pci_div *= (pcidf + 1);
+			}
+		} else {
+			pci_div = pcidf + 1;
+		}
+
+		gd->pci_clk = (gd->cpm_clk * 2) / pci_div;
+	}
+#endif
+
 	return (0);
 }
 
@@ -220,26 +244,9 @@ int prt_8260_clks (void)
 
 	printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
 			gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
-
-	if (sccr & SCCR_PCI_MODE) {
-		uint pci_div;
-		uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
-
-		if (sccr & SCCR_PCI_MODCK) {
-			pci_div = 2;
-			if (pcidf == 9) {
-				pci_div *= 5;
-			} else if (pcidf == 0xB) {
-				pci_div *= 6;
-			} else {
-				pci_div *= (pcidf + 1);
-			}
-		} else {
-			pci_div = pcidf + 1;
-		}
-
-		printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div);
-	}
+#ifdef CONFIG_PCI
+	printf (" - pci_clk %10ld\n", gd->pci_clk);
+#endif
 	putc ('\n');
 
 	return (0);

cpu/mpc85xx/mp.c

@@ -147,7 +147,7 @@ static void pq3_mp_up(unsigned long bootpg)
 	out_be32(&gur->devdisr, devdisr);
 
 	/* release the hounds */
-	up = ((1 << CONFIG_NR_CPUS) - 1);
+	up = ((1 << CONFIG_NUM_CPUS) - 1);
 	bpcr = in_be32(&ecm->eebpcr);
 	bpcr |= (up << 24);
 	out_be32(&ecm->eebpcr, bpcr);
@@ -157,7 +157,7 @@ static void pq3_mp_up(unsigned long bootpg)
 	/* wait for everyone */
 	while (timeout) {
 		int i;
-		for (i = 0; i < CONFIG_NR_CPUS; i++) {
+		for (i = 0; i < CONFIG_NUM_CPUS; i++) {
 			if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
 				cpu_up_mask |= (1 << i);
 		};

cpu/mpc85xx/release.S

@@ -173,7 +173,7 @@ __secondary_start_page:
 	.align L1_CACHE_SHIFT
 	.globl __spin_table
 __spin_table:
-	.space CONFIG_NR_CPUS*ENTRY_SIZE
+	.space CONFIG_NUM_CPUS*ENTRY_SIZE
 
 	/* Fill in the empty space.  The actual reset vector is
 	 * the last word of the page */

cpu/mpc86xx/cpu_init.c

@@ -26,8 +26,10 @@
  * cpu_init.c - low level cpu init
  */
 
+#include <config.h>
 #include <common.h>
 #include <mpc86xx.h>
+#include <asm/mmu.h>
 #include <asm/fsl_law.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -121,3 +123,26 @@ int cpu_init_r(void)
 {
 	return 0;
 }
+
+/* Set up BAT registers */
+void setup_bats(void)
+{
+	write_bat(DBAT0, CFG_DBAT0U, CFG_DBAT0L);
+	write_bat(IBAT0, CFG_IBAT0U, CFG_IBAT0L);
+	write_bat(DBAT1, CFG_DBAT1U, CFG_DBAT1L);
+	write_bat(IBAT1, CFG_IBAT1U, CFG_IBAT1L);
+	write_bat(DBAT2, CFG_DBAT2U, CFG_DBAT2L);
+	write_bat(IBAT2, CFG_IBAT2U, CFG_IBAT2L);
+	write_bat(DBAT3, CFG_DBAT3U, CFG_DBAT3L);
+	write_bat(IBAT3, CFG_IBAT3U, CFG_IBAT3L);
+	write_bat(DBAT4, CFG_DBAT4U, CFG_DBAT4L);
+	write_bat(IBAT4, CFG_IBAT4U, CFG_IBAT4L);
+	write_bat(DBAT5, CFG_DBAT5U, CFG_DBAT5L);
+	write_bat(IBAT5, CFG_IBAT5U, CFG_IBAT5L);
+	write_bat(DBAT6, CFG_DBAT6U, CFG_DBAT6L);
+	write_bat(IBAT6, CFG_IBAT6U, CFG_IBAT6L);
+	write_bat(DBAT7, CFG_DBAT7U, CFG_DBAT7L);
+	write_bat(IBAT7, CFG_IBAT7U, CFG_IBAT7L);
+
+	return;
+}

cpu/mpc86xx/start.S

@@ -358,125 +358,6 @@ invalidate_bats:
 	sync
 	blr
 
-
-	/* setup_bats - set them up to some initial state */
-	/* Skip any BATS setup in early_bats */
-	.globl	setup_bats
-setup_bats:
-
-	addis	r0, r0, 0x0000
-
-	/* IBAT 0 */
-	addis	r4, r0, CFG_IBAT0L@h
-	ori	r4, r4, CFG_IBAT0L@l
-	addis	r3, r0, CFG_IBAT0U@h
-	ori	r3, r3, CFG_IBAT0U@l
-	mtspr	IBAT0L, r4
-	mtspr	IBAT0U, r3
-	isync
-
-	/* DBAT 0 */
-	addis	r4, r0, CFG_DBAT0L@h
-	ori	r4, r4, CFG_DBAT0L@l
-	addis	r3, r0, CFG_DBAT0U@h
-	ori	r3, r3, CFG_DBAT0U@l
-	mtspr	DBAT0L, r4
-	mtspr	DBAT0U, r3
-	isync
-
-	/* IBAT 1 */
-	addis	r4, r0, CFG_IBAT1L@h
-	ori	r4, r4, CFG_IBAT1L@l
-	addis	r3, r0, CFG_IBAT1U@h
-	ori	r3, r3, CFG_IBAT1U@l
-	mtspr	IBAT1L, r4
-	mtspr	IBAT1U, r3
-	isync
-
-	/* DBAT 1 */
-	addis	r4, r0, CFG_DBAT1L@h
-	ori	r4, r4, CFG_DBAT1L@l
-	addis	r3, r0, CFG_DBAT1U@h
-	ori	r3, r3, CFG_DBAT1U@l
-	mtspr	DBAT1L, r4
-	mtspr	DBAT1U, r3
-	isync
-
-	/* IBAT 2 */
-	addis	r4, r0, CFG_IBAT2L@h
-	ori	r4, r4, CFG_IBAT2L@l
-	addis	r3, r0, CFG_IBAT2U@h
-	ori	r3, r3, CFG_IBAT2U@l
-	mtspr	IBAT2L, r4
-	mtspr	IBAT2U, r3
-	isync
-
-	/* DBAT 2 */
-	addis	r4, r0, CFG_DBAT2L@h
-	ori	r4, r4, CFG_DBAT2L@l
-	addis	r3, r0, CFG_DBAT2U@h
-	ori	r3, r3, CFG_DBAT2U@l
-	mtspr	DBAT2L, r4
-	mtspr	DBAT2U, r3
-	isync
-
-	/* IBAT 3 */
-	addis	r4, r0, CFG_IBAT3L@h
-	ori	r4, r4, CFG_IBAT3L@l
-	addis	r3, r0, CFG_IBAT3U@h
-	ori	r3, r3, CFG_IBAT3U@l
-	mtspr	IBAT3L, r4
-	mtspr	IBAT3U, r3
-	isync
-
-	/* DBAT 3 */
-	addis	r4, r0, CFG_DBAT3L@h
-	ori	r4, r4, CFG_DBAT3L@l
-	addis	r3, r0, CFG_DBAT3U@h
-	ori	r3, r3, CFG_DBAT3U@l
-	mtspr	DBAT3L, r4
-	mtspr	DBAT3U, r3
-	isync
-
-	/* IBAT 4 */
-	addis	r4, r0, CFG_IBAT4L@h
-	ori	r4, r4, CFG_IBAT4L@l
-	addis	r3, r0, CFG_IBAT4U@h
-	ori	r3, r3, CFG_IBAT4U@l
-	mtspr	IBAT4L, r4
-	mtspr	IBAT4U, r3
-	isync
-
-	/* DBAT 4 */
-	addis	r4, r0, CFG_DBAT4L@h
-	ori	r4, r4, CFG_DBAT4L@l
-	addis	r3, r0, CFG_DBAT4U@h
-	ori	r3, r3, CFG_DBAT4U@l
-	mtspr	DBAT4L, r4
-	mtspr	DBAT4U, r3
-	isync
-
-	/* IBAT 7 */
-	addis	r4, r0, CFG_IBAT7L@h
-	ori	r4, r4, CFG_IBAT7L@l
-	addis	r3, r0, CFG_IBAT7U@h
-	ori	r3, r3, CFG_IBAT7U@l
-	mtspr	IBAT7L, r4
-	mtspr	IBAT7U, r3
-	isync
-
-	/* DBAT 7 */
-	addis	r4, r0, CFG_DBAT7L@h
-	ori	r4, r4, CFG_DBAT7L@l
-	addis	r3, r0, CFG_DBAT7U@h
-	ori	r3, r3, CFG_DBAT7U@l
-	mtspr	DBAT7L, r4
-	mtspr	DBAT7U, r3
-	isync
-
-	sync
-	blr
-
 /*
  * early_bats:
  *

cpu/nios2/interrupts.c

@@ -27,6 +27,7 @@
 
 #include <nios2.h>
 #include <nios2-io.h>
+#include <asm/types.h>
 #include <asm/io.h>
 #include <asm/ptrace.h>
 #include <common.h>

cpu/nios2/sysid.c

@@ -40,7 +40,7 @@ void display_sysid (void)
 	stamp = readl (&sysid->timestamp);
 	localtime_r (&stamp, &t);
 	asctime_r (&t, asc);
-	printf ("SYSID : %08x, %s", readl (&sysid->id), asc);
+	printf ("SYSID : %08lx, %s", readl (&sysid->id), asc);
 
 }
 

cpu/ppc4xx/44x_spd_ddr2.c

@@ -1150,50 +1150,50 @@ static void program_codt(unsigned long *dimm_populated,
 	if (dimm_type == SDRAM_DDR2) {
 		codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
 		if ((total_dimm == 1) && (firstSlot == TRUE)) {
-			if (total_rank == 1) {
+			if (total_rank == 1) {	/* PUUU */
 				codt |= CALC_ODT_R(0);
 				modt0 = CALC_ODT_W(0);
 				modt1 = 0x00000000;
 				modt2 = 0x00000000;
 				modt3 = 0x00000000;
 			}
-			if (total_rank == 2) {
+			if (total_rank == 2) {	/* PPUU */
 				codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
-				modt0 = CALC_ODT_W(0);
-				modt1 = CALC_ODT_W(0);
+				modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
+				modt1 = 0x00000000;
 				modt2 = 0x00000000;
 				modt3 = 0x00000000;
 			}
 		} else if ((total_dimm == 1) && (firstSlot != TRUE)) {
-			if (total_rank == 1) {
+			if (total_rank == 1) {	/* UUPU */
 				codt |= CALC_ODT_R(2);
 				modt0 = 0x00000000;
 				modt1 = 0x00000000;
 				modt2 = CALC_ODT_W(2);
 				modt3 = 0x00000000;
 			}
-			if (total_rank == 2) {
+			if (total_rank == 2) {	/* UUPP */
 				codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
 				modt0 = 0x00000000;
 				modt1 = 0x00000000;
-				modt2 = CALC_ODT_W(2);
-				modt3 = CALC_ODT_W(2);
+				modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
+				modt3 = 0x00000000;
 			}
 		}
 		if (total_dimm == 2) {
-			if (total_rank == 2) {
+			if (total_rank == 2) {	/* PUPU */
 				codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
 				modt0 = CALC_ODT_RW(2);
 				modt1 = 0x00000000;
 				modt2 = CALC_ODT_RW(0);
 				modt3 = 0x00000000;
 			}
-			if (total_rank == 4) {
+			if (total_rank == 4) {	/* PPPP */
 				codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
 					CALC_ODT_R(2) | CALC_ODT_R(3);
-				modt0 = CALC_ODT_RW(2);
+				modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
 				modt1 = 0x00000000;
-				modt2 = CALC_ODT_RW(0);
+				modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
 				modt3 = 0x00000000;
 			}
 		}

cpu/pxa/mmc.c

@@ -559,11 +559,6 @@ mmc_init(int verbose)
 	set_GPIO_mode(GPIO8_MMCCS0_MD);
 #endif
 	CKEN |= CKEN12_MMC;	/* enable MMC unit clock */
-#if defined(CONFIG_ADSVIX)
-	/* turn on the power */
-	GPCR(114) = GPIO_bit(114);
-	udelay(1000);
-#endif
 
 	MMC_CLKRT = MMC_CLKRT_0_3125MHZ;
 	MMC_RESTO = MMC_RES_TO_MAX;

doc/README.autoboot

@@ -114,10 +114,17 @@ What they do
 	CONFIG_AUTOBOOT_PROMPT is displayed before the boot delay
 	selected by CONFIG_BOOTDELAY starts. If it is not defined
 	there is no output indicating that autoboot is in progress.
-	If "%d" is included, it is replaced by the number of seconds
-	remaining before autoboot will start, but it does not count
-	down the seconds. "autoboot in %d seconds\n" is a reasonable
-	prompt.
+
+	Note that CONFIG_AUTOBOOT_PROMPT is used as the (only)
+	argument to a printf() call, so it may contain '%' format
+	specifications, provided that it also includes, sepearated by
+	commas exactly like in a printf statement, the required
+	arguments. It is the responsibility of the user to select only
+	such arguments that are valid in the given context. A
+	reasonable prompt could be defined as
+
+		#define CONFIG_AUTOBOOT_PROMPT \
+			"autoboot in %d seconds\n",bootdelay
 
 	If CONFIG_AUTOBOOT_DELAY_STR or "bootdelaykey" is specified
 	and this string is received from console input before

doc/README.qemu_mips

@@ -15,4 +15,4 @@ create image:
 # dd of=flash bs=1k count=4k if=/dev/zero
 # dd of=flash bs=1k conv=notrunc if=u-boot.bin
 start it:
-# qemu-system-mips -pflash flash -monitor null -nographic
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic

drivers/i2c/fsl_i2c.c

@@ -143,12 +143,15 @@ void
 i2c_init(int speed, int slaveadd)
 {
 	struct fsl_i2c *dev;
+	unsigned int temp;
 
 	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
 
 	writeb(0, &dev->cr);			/* stop I2C controller */
 	udelay(5);				/* let it shutdown in peace */
-	i2c_bus_speed[0] = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
+	temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
+	if (gd->flags & GD_FLG_RELOC)
+		i2c_bus_speed[0] = temp;
 	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
 	writeb(0x0, &dev->sr);			/* clear status register */
 	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
@@ -158,7 +161,9 @@ i2c_init(int speed, int slaveadd)
 
 	writeb(0, &dev->cr);			/* stop I2C controller */
 	udelay(5);				/* let it shutdown in peace */
-	i2c_bus_speed[1] = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
+	temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
+	if (gd->flags & GD_FLG_RELOC)
+		i2c_bus_speed[1] = temp;
 	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
 	writeb(0x0, &dev->sr);			/* clear status register */
 	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
@@ -168,12 +173,11 @@ i2c_init(int speed, int slaveadd)
 static __inline__ int
 i2c_wait4bus(void)
 {
-	ulong timeval = get_timer(0);
+	unsigned long long timeval = get_ticks();
 
 	while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) {
-		if (get_timer(timeval) > I2C_TIMEOUT) {
+		if ((get_ticks() - timeval) > usec2ticks(I2C_TIMEOUT))
 			return -1;
-		}
 	}
 
 	return 0;
@@ -183,7 +187,7 @@ static __inline__ int
 i2c_wait(int write)
 {
 	u32 csr;
-	ulong timeval = get_timer(0);
+	unsigned long long timeval = get_ticks();
 
 	do {
 		csr = readb(&i2c_dev[i2c_bus_num]->sr);
@@ -208,7 +212,7 @@ i2c_wait(int write)
 		}
 
 		return 0;
-	} while (get_timer (timeval) < I2C_TIMEOUT);
+	} while ((get_ticks() - timeval) < usec2ticks(I2C_TIMEOUT));
 
 	debug("i2c_wait: timed out\n");
 	return -1;

drivers/mmc/atmel_mci.c

@@ -135,10 +135,10 @@ mmc_cmd(unsigned long cmd, unsigned long arg,
 		status = mmci_readl(SR);
 	} while (!(status & MMCI_BIT(CMDRDY)));
 
-	pr_debug("mmc: status 0x%08lx\n", status);
+	pr_debug("mmc: status 0x%08x\n", status);
 
 	if (status & error_flags) {
-		printf("mmc: command %lu failed (status: 0x%08lx)\n",
+		printf("mmc: command %lu failed (status: 0x%08x)\n",
 		       cmd, status);
 		return -EIO;
 	}
@@ -245,7 +245,7 @@ out:
 
 read_error:
 	mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR);
-	printf("mmc: bread failed, status = %08x, card status = %08x\n",
+	printf("mmc: bread failed, status = %08x, card status = %08lx\n",
 	       status, card_status);
 	goto out;
 }
@@ -284,13 +284,13 @@ static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp)
 
 static void mmc_dump_cid(const struct mmc_cid *cid)
 {
-	printf("Manufacturer ID:       %02lX\n", cid->mid);
-	printf("OEM/Application ID:    %04lX\n", cid->oid);
+	printf("Manufacturer ID:       %02X\n", cid->mid);
+	printf("OEM/Application ID:    %04X\n", cid->oid);
 	printf("Product name:          %s\n", cid->pnm);
-	printf("Product Revision:      %lu.%lu\n",
+	printf("Product Revision:      %u.%u\n",
 	       cid->prv >> 4, cid->prv & 0x0f);
 	printf("Product Serial Number: %lu\n", cid->psn);
-	printf("Manufacturing Date:    %02lu/%02lu\n",
+	printf("Manufacturing Date:    %02u/%02u\n",
 	       cid->mdt >> 4, cid->mdt & 0x0f);
 }
 
@@ -501,7 +501,7 @@ int mmc_init(int verbose)
 	mmc_blkdev.part_type = PART_TYPE_DOS;
 	mmc_blkdev.block_read = mmc_bread;
 	sprintf((char *)mmc_blkdev.vendor,
-		"Man %02x%04x Snr %08x",
+		"Man %02x%04x Snr %08lx",
 		cid.mid, cid.oid, cid.psn);
 	strncpy((char *)mmc_blkdev.product, cid.pnm,
 		sizeof(mmc_blkdev.product));

drivers/mtd/cfi_flash.c

@@ -158,13 +158,13 @@ static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
 
 /* use CFG_MAX_FLASH_BANKS_DETECT if defined */
 #ifdef CFG_MAX_FLASH_BANKS_DETECT
-static ulong bank_base[CFG_MAX_FLASH_BANKS_DETECT] = CFG_FLASH_BANKS_LIST;
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS_DETECT];	/* FLASH chips info */
+# define CFI_MAX_FLASH_BANKS	CFG_MAX_FLASH_BANKS_DETECT
 #else
-static ulong bank_base[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];		/* FLASH chips info */
+# define CFI_MAX_FLASH_BANKS	CFG_MAX_FLASH_BANKS
 #endif
 
+flash_info_t flash_info[CFI_MAX_FLASH_BANKS];	/* FLASH chips info */
+
 /*
  * Check if chip width is defined. If not, start detecting with 8bit.
  */
@@ -306,6 +306,9 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
 	int i;
 	int cword_offset;
 	int cp_offset;
+#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
+	u32 cmd_le = cpu_to_le32(cmd);
+#endif
 	uchar val;
 	uchar *cp = (uchar *) cmdbuf;
 
@@ -313,7 +316,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf)
 		cword_offset = (info->portwidth-i)%info->chipwidth;
 #if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA)
 		cp_offset = info->portwidth - i;
-		val = *((uchar*)&cmd + cword_offset);
+		val = *((uchar*)&cmd_le + cword_offset);
 #else
 		cp_offset = i - 1;
 		val = *((uchar*)&cmd + sizeof(u32) - cword_offset - 1);
@@ -1909,12 +1912,14 @@ unsigned long flash_init (void)
 	char *s = getenv("unlock");
 #endif
 
+#define BANK_BASE(i)	(((unsigned long [CFI_MAX_FLASH_BANKS])CFG_FLASH_BANKS_LIST)[i])
+
 	/* Init: no FLASHes known */
 	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 
-		if (!flash_detect_legacy (bank_base[i], i))
-			flash_get_size (bank_base[i], i);
+		if (!flash_detect_legacy (BANK_BASE(i), i))
+			flash_get_size (BANK_BASE(i), i);
 		size += flash_info[i].size;
 		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 #ifndef CFG_FLASH_QUIET_TEST

drivers/mtd/dataflash.c

@@ -56,7 +56,7 @@ int AT91F_DataflashInit (void)
 		switch (dfcode) {
 		case AT45DB021:
 			dataflash_info[i].Device.pages_number = 1024;
-			dataflash_info[i].Device.pages_size = 263;
+			dataflash_info[i].Device.pages_size = 264;
 			dataflash_info[i].Device.page_offset = 9;
 			dataflash_info[i].Device.byte_mask = 0x300;
 			dataflash_info[i].Device.cs = cs[i].cs;
@@ -65,6 +65,19 @@ int AT91F_DataflashInit (void)
 			dataflash_info[i].id = dfcode;
 			found[i] += dfcode;;
 			break;
+
+		case AT45DB081:
+			dataflash_info[i].Device.pages_number = 4096;
+			dataflash_info[i].Device.pages_size = 264;
+			dataflash_info[i].Device.page_offset = 9;
+			dataflash_info[i].Device.byte_mask = 0x300;
+			dataflash_info[i].Device.cs = cs[i].cs;
+			dataflash_info[i].Desc.DataFlash_state = IDLE;
+			dataflash_info[i].logical_address = cs[i].addr;
+			dataflash_info[i].id = dfcode;
+			found[i] += dfcode;;
+			break;
+
 		case AT45DB161:
 			dataflash_info[i].Device.pages_number = 4096;
 			dataflash_info[i].Device.pages_size = 528;

drivers/mtd/onenand/onenand_base.c

@@ -680,13 +680,11 @@ int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
  * onenand_verify_page - [GENERIC] verify the chip contents after a write
  * @param mtd		MTD device structure
  * @param buf		the databuffer to verify
- * @param block		block address
- * @param page		page address
  *
  * Check DataRAM area directly
  */
 static int onenand_verify_page(struct mtd_info *mtd, u_char * buf,
-			       loff_t addr, int block, int page)
+			       loff_t addr)
 {
 	struct onenand_chip *this = mtd->priv;
 	void __iomem *dataram0, *dataram1;
@@ -783,7 +781,7 @@ static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
 		written += thislen;
 
 		/* Only check verify write turn on */
-		ret = onenand_verify_page(mtd, (u_char *) buf, to, block, page);
+		ret = onenand_verify_page(mtd, (u_char *) buf, to);
 		if (ret) {
 			MTDDEBUG (MTD_DEBUG_LEVEL0,
 			          "onenand_write_ecc: verify failed %d\n", ret);

drivers/mtd/spi/atmel.c

@@ -205,7 +205,7 @@ static int dataflash_write_at45(struct spi_flash *flash,
 		byte_addr = 0;
 	}
 
-	debug("SF: AT45: Successfully programmed %u bytes @ 0x%x\n",
+	debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n",
 			len, offset);
 	ret = 0;
 
@@ -268,7 +268,7 @@ int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len)
 		page_addr++;
 	}
 
-	debug("SF: AT45: Successfully erased %u bytes @ 0x%x\n",
+	debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n",
 			len, offset);
 	ret = 0;
 
@@ -351,7 +351,7 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode)
 				* params->blocks_per_sector
 				* params->nr_sectors;
 
-	debug("SF: Detected %s with page size %u, total %u bytes\n",
+	debug("SF: Detected %s with page size %lu, total %u bytes\n",
 			params->name, page_size, asf->flash.size);
 
 	return &asf->flash;

drivers/net/e1000.c

@@ -513,9 +513,11 @@ e1000_read_mac_addr(struct eth_device *nic)
 		nic->enetaddr[5] += 1;
 	}
 #ifdef CONFIG_E1000_FALLBACK_MAC
-	if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 )
-		for ( i=0; i < NODE_ADDRESS_SIZE; i++ )
-			nic->enetaddr[i] = (CONFIG_E1000_FALLBACK_MAC >> (8*(5-i))) & 0xff;
+	if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) {
+		unsigned char fb_mac[NODE_ADDRESS_SIZE] = CONFIG_E1000_FALLBACK_MAC;
+
+		memcpy (nic->enetaddr, fb_mac, NODE_ADDRESS_SIZE);
+	}
 #endif
 #else
 	/*
@@ -531,10 +533,9 @@ e1000_read_mac_addr(struct eth_device *nic)
 	DEBUGFUNC();
 
 	s = getenv ("ethaddr");
-	if (s == NULL){
+	if (s == NULL) {
 		return -E1000_ERR_EEPROM;
-	}
-	else{
+	} else {
 		for(ii = 0; ii < 6; ii++) {
 			nic->enetaddr[ii] = s ? simple_strtoul (s, &e, 16) : 0;
 			if (s){

drivers/qe/uec.c

@@ -29,6 +29,7 @@
 #include "uccf.h"
 #include "uec.h"
 #include "uec_phy.h"
+#include "miiphy.h"
 
 #if defined(CONFIG_QE)
 
@@ -125,6 +126,13 @@ static uec_info_t eth4_uec_info = {
 };
 #endif
 
+#define MAXCONTROLLERS	(4)
+
+static struct eth_device *devlist[MAXCONTROLLERS];
+
+u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
+void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+
 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
 {
 	uec_t		*uec_regs;
@@ -629,6 +637,39 @@ static void phy_change(struct eth_device *dev)
 	adjust_link(dev);
 }
 
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
+
+/*
+ * Read a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_read(char *devname, unsigned char addr,
+			    unsigned char reg, unsigned short *value)
+{
+	*value = uec_read_phy_reg(devlist[0], addr, reg);
+
+	return 0;
+}
+
+/*
+ * Write a MII PHY register.
+ *
+ * Returns:
+ *  0 on success
+ */
+static int uec_miiphy_write(char *devname, unsigned char addr,
+			     unsigned char reg, unsigned short value)
+{
+	uec_write_phy_reg(devlist[0], addr, reg, value);
+
+	return 0;
+}
+
+#endif
+
 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
 {
 	uec_t		*uec_regs;
@@ -1334,6 +1375,8 @@ int uec_initialize(int index)
 		return -EINVAL;
 	}
 
+	devlist[index] = dev;
+
 	uec->uec_info = uec_info;
 
 	sprintf(dev->name, "FSL UEC%d", index);
@@ -1356,6 +1399,13 @@ int uec_initialize(int index)
 		return err;
 	}
 
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
+	&& !defined(BITBANGMII)
+	miiphy_register(dev->name, uec_miiphy_read, uec_miiphy_write);
+#endif
+
 	return 1;
 }
+
+
 #endif /* CONFIG_QE */

drivers/serial/Makefile

@@ -25,18 +25,18 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libserial.a
 
-COBJS-y += atmel_usart.o
-COBJS-y += mcfuart.o
+COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
+COBJS-$(CONFIG_MCFUART) += mcfuart.o
 COBJS-y += ns9750_serial.o
 COBJS-y += ns16550.o
-COBJS-y += s3c4510b_uart.o
+COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
 COBJS-y += serial.o
-COBJS-y += serial_max3100.o
+COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 COBJS-y += serial_pl010.o
 COBJS-y += serial_pl011.o
-COBJS-y += serial_xuartlite.o
+COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 COBJS-y += serial_sh.o
-COBJS-y += usbtty.o
+COBJS-$(CONFIG_USB_TTY) += usbtty.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/serial/atmel_usart.c

@@ -17,7 +17,6 @@
  */
 #include <common.h>
 
-#ifdef CONFIG_ATMEL_USART
 #include <asm/io.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/memory-map.h>
@@ -96,5 +95,3 @@ int serial_tstc(void)
 {
 	return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
 }
-
-#endif /* CONFIG_ATMEL_USART */

drivers/serial/mcfuart.c

@@ -29,8 +29,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_MCFUART
-
 #include <asm/immap.h>
 #include <asm/uart.h>
 
@@ -130,4 +128,3 @@ void serial_setbrg(void)
 
 	uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED;
 }
-#endif				/* CONFIG_MCFUART */

drivers/serial/s3c4510b_uart.c

@@ -45,8 +45,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_DRIVER_S3C4510_UART
-
 #include <asm/hardware.h>
 #include "s3c4510b_uart.h"
 
@@ -212,5 +210,3 @@ void serial_puts (const char *s)
 	uart->m_ctrl.bf.sendBreak = 0;
 
 }
-
-#endif

drivers/serial/serial_max3100.c

@@ -26,8 +26,6 @@
 #include <common.h>
 #include <watchdog.h>
 
-#ifdef CONFIG_MAX3100_SERIAL
-
 DECLARE_GLOBAL_DATA_PTR;
 
 /**************************************************************/
@@ -298,5 +296,3 @@ int serial_tstc(void)
 void serial_setbrg(void)
 {
 }
-
-#endif

drivers/serial/serial_xuartlite.c

@@ -27,8 +27,6 @@
 #include <config.h>
 #include <asm/io.h>
 
-#ifdef	CONFIG_XILINX_UARTLITE
-
 #define RX_FIFO_OFFSET		0 /* receive FIFO, read only */
 #define TX_FIFO_OFFSET		4 /* transmit FIFO, write only */
 #define STATUS_REG_OFFSET	8 /* status register, read only */
@@ -56,8 +54,8 @@ void serial_putc(const char c)
 {
 	if (c == '\n')
 		serial_putc('\r');
-	while (in_be32(UARTLITE_STATUS) & SR_TX_FIFO_FULL);
-	out_be32(UARTLITE_TX_FIFO, (unsigned char) (c & 0xff));
+	while (in_be32((u32 *) UARTLITE_STATUS) & SR_TX_FIFO_FULL);
+	out_be32((u32 *) UARTLITE_TX_FIFO, (unsigned char) (c & 0xff));
 }
 
 void serial_puts(const char * s)
@@ -69,13 +67,11 @@ void serial_puts(const char * s)
 
 int serial_getc(void)
 {
-	while (!(in_be32(UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA));
-	return in_be32(UARTLITE_RX_FIFO) & 0xff;
+	while (!(in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA));
+	return in_be32((u32 *) UARTLITE_RX_FIFO) & 0xff;
 }
 
 int serial_tstc(void)
 {
-	return (in_be32(UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
+	return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA);
 }
-
-#endif	/* CONFIG_MICROBLZE */

drivers/serial/usbtty.c

@@ -23,8 +23,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_USB_TTY
-
 #include <circbuf.h>
 #include <devices.h>
 #include "usbtty.h"
@@ -1007,6 +1005,3 @@ void usbtty_poll (void)
 	udc_irq();
 
 }
-
-
-#endif

drivers/usb/Makefile

@@ -25,6 +25,8 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libusb.a
 
+COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
+
 COBJS-y += isp116x-hcd.o
 COBJS-y += sl811_usb.o
 COBJS-y += usb_ohci.o

drivers/usb/r8a66597-hcd.c

@@ -0,0 +1,919 @@
+/*
+ * R8A66597 HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+
+#include "r8a66597.h"
+
+#ifdef R8A66597_DEBUG
+#define R8A66597_DPRINT		printf
+#else
+#define R8A66597_DPRINT(...)
+#endif
+
+static const char hcd_name[] = "r8a66597_hcd";
+static unsigned short clock = CONFIG_R8A66597_XTAL;
+static unsigned short vif = CONFIG_R8A66597_LDRV;
+static unsigned short endian = CONFIG_R8A66597_ENDIAN;
+static struct r8a66597 gr8a66597;
+
+static void set_devadd_reg(struct r8a66597 *r8a66597, u8 r8a66597_address,
+			   u16 usbspd, u8 upphub, u8 hubport, int port)
+{
+	u16 val;
+	unsigned long devadd_reg = get_devadd_addr(r8a66597_address);
+
+	val = (upphub << 11) | (hubport << 8) | (usbspd << 6) | (port & 0x0001);
+	r8a66597_write(r8a66597, val, devadd_reg);
+}
+
+static int r8a66597_clock_enable(struct r8a66597 *r8a66597)
+{
+	u16 tmp;
+	int i = 0;
+
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+	do {
+		r8a66597_write(r8a66597, SCKE, SYSCFG0);
+		tmp = r8a66597_read(r8a66597, SYSCFG0);
+		if (i++ > 1000) {
+			printf("register access fail.\n");
+			return -1;
+		}
+	} while ((tmp & SCKE) != SCKE);
+	r8a66597_write(r8a66597, 0x04, 0x02);
+#else
+	do {
+		r8a66597_write(r8a66597, USBE, SYSCFG0);
+		tmp = r8a66597_read(r8a66597, SYSCFG0);
+		if (i++ > 1000) {
+			printf("register access fail.\n");
+			return -1;
+		}
+	} while ((tmp & USBE) != USBE);
+	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+	r8a66597_mdfy(r8a66597, clock, XTAL, SYSCFG0);
+
+	i = 0;
+	r8a66597_bset(r8a66597, XCKE, SYSCFG0);
+	do {
+		udelay(1000);
+		tmp = r8a66597_read(r8a66597, SYSCFG0);
+		if (i++ > 500) {
+			printf("register access fail.\n");
+			return -1;
+		}
+	} while ((tmp & SCKE) != SCKE);
+#endif	/* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */
+
+	return 0;
+}
+
+static void r8a66597_clock_disable(struct r8a66597 *r8a66597)
+{
+	r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
+	udelay(1);
+#if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+	r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
+	r8a66597_bclr(r8a66597, XCKE, SYSCFG0);
+	r8a66597_bclr(r8a66597, USBE, SYSCFG0);
+#endif
+}
+
+static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port)
+{
+	u16 val;
+
+	val = port ? DRPD : DCFM | DRPD;
+	r8a66597_bset(r8a66597, val, get_syscfg_reg(port));
+	r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
+
+	r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port));
+}
+
+static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port)
+{
+	u16 val, tmp;
+
+	r8a66597_write(r8a66597, 0, get_intenb_reg(port));
+	r8a66597_write(r8a66597, 0, get_intsts_reg(port));
+
+	r8a66597_port_power(r8a66597, port, 0);
+
+	do {
+		tmp = r8a66597_read(r8a66597, SOFCFG) & EDGESTS;
+		udelay(640);
+	} while (tmp == EDGESTS);
+
+	val = port ? DRPD : DCFM | DRPD;
+	r8a66597_bclr(r8a66597, val, get_syscfg_reg(port));
+	r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
+}
+
+static int enable_controller(struct r8a66597 *r8a66597)
+{
+	int ret, port;
+
+	ret = r8a66597_clock_enable(r8a66597);
+	if (ret < 0)
+		return ret;
+
+	r8a66597_bset(r8a66597, vif & LDRV, PINCFG);
+	r8a66597_bset(r8a66597, USBE, SYSCFG0);
+
+	r8a66597_bset(r8a66597, INTL, SOFCFG);
+	r8a66597_write(r8a66597, 0, INTENB0);
+	r8a66597_write(r8a66597, 0, INTENB1);
+	r8a66597_write(r8a66597, 0, INTENB2);
+
+	r8a66597_bset(r8a66597, endian & BIGEND, CFIFOSEL);
+	r8a66597_bset(r8a66597, endian & BIGEND, D0FIFOSEL);
+	r8a66597_bset(r8a66597, endian & BIGEND, D1FIFOSEL);
+	r8a66597_bset(r8a66597, TRNENSEL, SOFCFG);
+
+	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
+		r8a66597_enable_port(r8a66597, port);
+
+	return 0;
+}
+
+static void disable_controller(struct r8a66597 *r8a66597)
+{
+	int i;
+
+	if (!(r8a66597_read(r8a66597, SYSCFG0) & USBE))
+		return;
+
+	r8a66597_write(r8a66597, 0, INTENB0);
+	r8a66597_write(r8a66597, 0, INTSTS0);
+
+	r8a66597_write(r8a66597, 0, D0FIFOSEL);
+	r8a66597_write(r8a66597, 0, D1FIFOSEL);
+	r8a66597_write(r8a66597, 0, DCPCFG);
+	r8a66597_write(r8a66597, 0x40, DCPMAXP);
+	r8a66597_write(r8a66597, 0, DCPCTR);
+
+	for (i = 0; i <= 10; i++)
+		r8a66597_write(r8a66597, 0, get_devadd_addr(i));
+	for (i = 1; i <= 5; i++) {
+		r8a66597_write(r8a66597, 0, get_pipetre_addr(i));
+		r8a66597_write(r8a66597, 0, get_pipetrn_addr(i));
+	}
+	for (i = 1; i < R8A66597_MAX_NUM_PIPE; i++) {
+		r8a66597_write(r8a66597, 0, get_pipectr_addr(i));
+		r8a66597_write(r8a66597, i, PIPESEL);
+		r8a66597_write(r8a66597, 0, PIPECFG);
+		r8a66597_write(r8a66597, 0, PIPEBUF);
+		r8a66597_write(r8a66597, 0, PIPEMAXP);
+		r8a66597_write(r8a66597, 0, PIPEPERI);
+	}
+
+	for (i = 0; i < R8A66597_MAX_ROOT_HUB; i++)
+		r8a66597_disable_port(r8a66597, i);
+
+	r8a66597_clock_disable(r8a66597);
+}
+
+static void r8a66597_reg_wait(struct r8a66597 *r8a66597, unsigned long reg,
+			      u16 mask, u16 loop)
+{
+	u16 tmp;
+	int i = 0;
+
+	do {
+		tmp = r8a66597_read(r8a66597, reg);
+		if (i++ > 1000000) {
+			printf("register%lx, loop %x is timeout\n", reg, loop);
+			break;
+		}
+	} while ((tmp & mask) != loop);
+}
+
+static void pipe_buffer_setting(struct r8a66597 *r8a66597,
+				struct usb_device *dev, unsigned long pipe)
+{
+	u16 val = 0;
+	u16 pipenum, bufnum, maxpacket;
+
+	if (usb_pipein(pipe)) {
+		pipenum = BULK_IN_PIPENUM;
+		bufnum = BULK_IN_BUFNUM;
+		maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
+	} else {
+		pipenum = BULK_OUT_PIPENUM;
+		bufnum = BULK_OUT_BUFNUM;
+		maxpacket = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
+	}
+
+	if (r8a66597->pipe_config & (1 << pipenum))
+		return;
+	r8a66597->pipe_config |= (1 << pipenum);
+
+	r8a66597_bset(r8a66597, ACLRM, get_pipectr_addr(pipenum));
+	r8a66597_bclr(r8a66597, ACLRM, get_pipectr_addr(pipenum));
+	r8a66597_write(r8a66597, pipenum, PIPESEL);
+
+	/* FIXME: This driver support bulk transfer only. */
+	if (!usb_pipein(pipe))
+		val |= R8A66597_DIR;
+	else
+		val |= R8A66597_SHTNAK;
+	val |= R8A66597_BULK | R8A66597_DBLB | usb_pipeendpoint(pipe);
+	r8a66597_write(r8a66597, val, PIPECFG);
+
+	r8a66597_write(r8a66597, (8 << 10) | bufnum, PIPEBUF);
+	r8a66597_write(r8a66597, make_devsel(usb_pipedevice(pipe)) |
+				 maxpacket, PIPEMAXP);
+	r8a66597_write(r8a66597, 0, PIPEPERI);
+	r8a66597_write(r8a66597, SQCLR, get_pipectr_addr(pipenum));
+}
+
+static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
+			     struct devrequest *setup)
+{
+	int i;
+	unsigned short *p = (unsigned short *)setup;
+	unsigned long setup_addr = USBREQ;
+	u16 intsts1;
+	int timeout = 3000;
+	u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum;
+
+	r8a66597_write(r8a66597, make_devsel(devsel) |
+				 (8 << dev->maxpacketsize), DCPMAXP);
+	r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1);
+
+	for (i = 0; i < 4; i++) {
+		r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr);
+		setup_addr += 2;
+	}
+	r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
+	r8a66597_write(r8a66597, SUREQ, DCPCTR);
+
+	while (1) {
+		intsts1 = r8a66597_read(r8a66597, INTSTS1);
+		if (intsts1 & SACK)
+			break;
+		if (intsts1 & SIGN) {
+			printf("setup packet send error\n");
+			return -1;
+		}
+		if (timeout-- < 0) {
+			printf("setup packet timeout\n");
+			return -1;
+		}
+		udelay(500);
+	}
+
+	return 0;
+}
+
+static int send_bulk_packet(struct r8a66597 *r8a66597, struct usb_device *dev,
+			    unsigned long pipe, void *buffer, int transfer_len)
+{
+	u16 tmp, bufsize;
+	u16 *buf;
+	size_t size;
+
+	R8A66597_DPRINT("%s\n", __func__);
+
+	r8a66597_mdfy(r8a66597, MBW | BULK_OUT_PIPENUM,
+			MBW | CURPIPE, CFIFOSEL);
+	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, BULK_OUT_PIPENUM);
+	tmp = r8a66597_read(r8a66597, CFIFOCTR);
+	if ((tmp & FRDY) == 0) {
+		printf("%s FRDY is not set (%x)\n", __func__, tmp);
+		return -1;
+	}
+
+	/* prepare parameters */
+	bufsize = dev->epmaxpacketout[usb_pipeendpoint(pipe)];
+	buf = (u16 *)(buffer + dev->act_len);
+	size = min((int)bufsize, transfer_len - dev->act_len);
+
+	/* write fifo */
+	r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
+	if (buffer) {
+		r8a66597_write_fifo(r8a66597, CFIFO, buf, size);
+		r8a66597_write(r8a66597, BVAL, CFIFOCTR);
+	}
+
+	/* update parameters */
+	dev->act_len += size;
+
+	r8a66597_mdfy(r8a66597, PID_BUF, PID,
+			get_pipectr_addr(BULK_OUT_PIPENUM));
+
+	while (!(r8a66597_read(r8a66597, BEMPSTS) & (1 << BULK_OUT_PIPENUM)))
+		if (ctrlc())
+			return -1;
+	r8a66597_write(r8a66597, ~(1 << BULK_OUT_PIPENUM), BEMPSTS);
+
+	if (dev->act_len >= transfer_len)
+		r8a66597_mdfy(r8a66597, PID_NAK, PID,
+				get_pipectr_addr(BULK_OUT_PIPENUM));
+
+	return 0;
+}
+
+static int receive_bulk_packet(struct r8a66597 *r8a66597,
+			       struct usb_device *dev,
+			       unsigned long pipe,
+			       void *buffer, int transfer_len)
+{
+	u16 tmp;
+	u16 *buf;
+	const u16 pipenum = BULK_IN_PIPENUM;
+	int rcv_len;
+	int maxpacket = dev->epmaxpacketin[usb_pipeendpoint(pipe)];
+
+	R8A66597_DPRINT("%s\n", __func__);
+
+	/* prepare */
+	if (dev->act_len == 0) {
+		r8a66597_mdfy(r8a66597, PID_NAK, PID,
+				get_pipectr_addr(pipenum));
+		r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
+
+		r8a66597_write(r8a66597, TRCLR, get_pipetre_addr(pipenum));
+		r8a66597_write(r8a66597,
+				(transfer_len + maxpacket - 1) / maxpacket,
+				get_pipetrn_addr(pipenum));
+		r8a66597_bset(r8a66597, TRENB, get_pipetre_addr(pipenum));
+
+		r8a66597_mdfy(r8a66597, PID_BUF, PID,
+				get_pipectr_addr(pipenum));
+	}
+
+	r8a66597_mdfy(r8a66597, MBW | pipenum, MBW | CURPIPE, CFIFOSEL);
+	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, pipenum);
+
+	while (!(r8a66597_read(r8a66597, BRDYSTS) & (1 << pipenum)))
+		if (ctrlc())
+			return -1;
+	r8a66597_write(r8a66597, ~(1 << pipenum), BRDYSTS);
+
+	tmp = r8a66597_read(r8a66597, CFIFOCTR);
+	if ((tmp & FRDY) == 0) {
+		printf("%s FRDY is not set. (%x)\n", __func__, tmp);
+		return -1;
+	}
+
+	buf = (u16 *)(buffer + dev->act_len);
+	rcv_len = tmp & DTLN;
+	dev->act_len += rcv_len;
+
+	if (buffer) {
+		if (rcv_len == 0)
+			r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+		else
+			r8a66597_read_fifo(r8a66597, CFIFO, buf, rcv_len);
+	}
+
+	return 0;
+}
+
+static int receive_control_packet(struct r8a66597 *r8a66597,
+				  struct usb_device *dev,
+				  void *buffer, int transfer_len)
+{
+	u16 tmp;
+	int rcv_len;
+
+	/* FIXME: limit transfer size : 64byte or less */
+
+	r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
+	r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
+	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+	r8a66597_bset(r8a66597, SQSET, DCPCTR);
+	r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+	r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
+
+	while (!(r8a66597_read(r8a66597, BRDYSTS) & 0x0001))
+		if (ctrlc())
+			return -1;
+	r8a66597_write(r8a66597, ~0x0001, BRDYSTS);
+
+	r8a66597_mdfy(r8a66597, MBW, MBW | CURPIPE, CFIFOSEL);
+	r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+
+	tmp = r8a66597_read(r8a66597, CFIFOCTR);
+	if ((tmp & FRDY) == 0) {
+		printf("%s FRDY is not set. (%x)\n", __func__, tmp);
+		return -1;
+	}
+
+	rcv_len = tmp & DTLN;
+	dev->act_len += rcv_len;
+
+	r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
+
+	if (buffer) {
+		if (rcv_len == 0)
+			r8a66597_write(r8a66597, BCLR, DCPCTR);
+		else
+			r8a66597_read_fifo(r8a66597, CFIFO, buffer, rcv_len);
+	}
+
+	return 0;
+}
+
+static int send_status_packet(struct r8a66597 *r8a66597,
+			       unsigned long pipe)
+{
+	r8a66597_bset(r8a66597, SQSET, DCPCTR);
+	r8a66597_mdfy(r8a66597, PID_NAK, PID, DCPCTR);
+
+	if (usb_pipein(pipe)) {
+		r8a66597_bset(r8a66597, R8A66597_DIR, DCPCFG);
+		r8a66597_mdfy(r8a66597, ISEL, ISEL | CURPIPE, CFIFOSEL);
+		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+		r8a66597_write(r8a66597, ~BEMP0, BEMPSTS);
+		r8a66597_write(r8a66597, BCLR | BVAL, CFIFOCTR);
+	} else {
+		r8a66597_bclr(r8a66597, R8A66597_DIR, DCPCFG);
+		r8a66597_mdfy(r8a66597, 0, ISEL | CURPIPE, CFIFOSEL);
+		r8a66597_reg_wait(r8a66597, CFIFOSEL, CURPIPE, 0);
+		r8a66597_write(r8a66597, BCLR, CFIFOCTR);
+	}
+	r8a66597_mdfy(r8a66597, PID_BUF, PID, DCPCTR);
+
+	while (!(r8a66597_read(r8a66597, BEMPSTS) & 0x0001))
+		if (ctrlc())
+			return -1;
+
+	return 0;
+}
+
+static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port)
+{
+	int count = R8A66597_MAX_SAMPLING;
+	unsigned short syssts, old_syssts;
+
+	R8A66597_DPRINT("%s\n", __func__);
+
+	old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
+	while (count > 0) {
+		wait_ms(R8A66597_RH_POLL_TIME);
+
+		syssts = r8a66597_read(r8a66597, get_syssts_reg(port) & LNST);
+		if (syssts == old_syssts) {
+			count--;
+		} else {
+			count = R8A66597_MAX_SAMPLING;
+			old_syssts = syssts;
+		}
+	}
+}
+
+static void r8a66597_bus_reset(struct r8a66597 *r8a66597, int port)
+{
+	wait_ms(10);
+	r8a66597_mdfy(r8a66597, USBRST, USBRST | UACT, get_dvstctr_reg(port));
+	wait_ms(50);
+	r8a66597_mdfy(r8a66597, UACT, USBRST | UACT, get_dvstctr_reg(port));
+	wait_ms(50);
+}
+
+static int check_usb_device_connecting(struct r8a66597 *r8a66597)
+{
+	int timeout = 10000;	/* 100usec * 10000 = 1sec */
+	int i;
+
+	for (i = 0; i < 5; i++) {
+		/* check a usb cable connect */
+		while (!(r8a66597_read(r8a66597, INTSTS1) & ATTCH)) {
+			if (timeout-- < 0) {
+				printf("%s timeout.\n", __func__);
+				return -1;
+			}
+			udelay(100);
+		}
+
+		/* check a data line */
+		r8a66597_check_syssts(r8a66597, 0);
+
+		r8a66597_bus_reset(r8a66597, 0);
+		r8a66597->speed = get_rh_usb_speed(r8a66597, 0);
+
+		if (!(r8a66597_read(r8a66597, INTSTS1) & DTCH)) {
+			r8a66597->port_change = USB_PORT_STAT_C_CONNECTION;
+			r8a66597->port_status = USB_PORT_STAT_CONNECTION |
+						USB_PORT_STAT_ENABLE;
+			return 0;	/* success */
+		}
+
+		R8A66597_DPRINT("USB device has detached. retry = %d\n", i);
+		r8a66597_write(r8a66597, ~DTCH, INTSTS1);
+	}
+
+	return -1;	/* fail */
+}
+
+/* based on usb_ohci.c */
+#define min_t(type, x, y) \
+		({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
+/*-------------------------------------------------------------------------*
+ * Virtual Root Hub
+ *-------------------------------------------------------------------------*/
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] =
+{
+	0x12,	    /*	__u8  bLength; */
+	0x01,	    /*	__u8  bDescriptorType; Device */
+	0x10,	    /*	__u16 bcdUSB; v1.1 */
+	0x01,
+	0x09,	    /*	__u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  bDeviceSubClass; */
+	0x00,	    /*	__u8  bDeviceProtocol; */
+	0x08,	    /*	__u8  bMaxPacketSize0; 8 Bytes */
+	0x00,	    /*	__u16 idVendor; */
+	0x00,
+	0x00,	    /*	__u16 idProduct; */
+	0x00,
+	0x00,	    /*	__u16 bcdDevice; */
+	0x00,
+	0x00,	    /*	__u8  iManufacturer; */
+	0x01,	    /*	__u8  iProduct; */
+	0x00,	    /*	__u8  iSerialNumber; */
+	0x01	    /*	__u8  bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] =
+{
+	0x09,	    /*	__u8  bLength; */
+	0x02,	    /*	__u8  bDescriptorType; Configuration */
+	0x19,	    /*	__u16 wTotalLength; */
+	0x00,
+	0x01,	    /*	__u8  bNumInterfaces; */
+	0x01,	    /*	__u8  bConfigurationValue; */
+	0x00,	    /*	__u8  iConfiguration; */
+	0x40,	    /*	__u8  bmAttributes; */
+
+	0x00,	    /*	__u8  MaxPower; */
+
+	/* interface */
+	0x09,	    /*	__u8  if_bLength; */
+	0x04,	    /*	__u8  if_bDescriptorType; Interface */
+	0x00,	    /*	__u8  if_bInterfaceNumber; */
+	0x00,	    /*	__u8  if_bAlternateSetting; */
+	0x01,	    /*	__u8  if_bNumEndpoints; */
+	0x09,	    /*	__u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,	    /*	__u8  if_bInterfaceSubClass; */
+	0x00,	    /*	__u8  if_bInterfaceProtocol; */
+	0x00,	    /*	__u8  if_iInterface; */
+
+	/* endpoint */
+	0x07,	    /*	__u8  ep_bLength; */
+	0x05,	    /*	__u8  ep_bDescriptorType; Endpoint */
+	0x81,	    /*	__u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,	    /*	__u8  ep_bmAttributes; Interrupt */
+	0x02,	    /*	__u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+	0x00,
+	0xff	    /*	__u8  ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] =
+{
+	0x04,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	0x09,			/*  __u8  lang ID */
+	0x04,			/*  __u8  lang ID */
+};
+
+static unsigned char root_hub_str_index1[] =
+{
+	34,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	'R',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'8',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'A',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'6',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'6',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'5',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'9',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'7',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	' ',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'R',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	't',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'H',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'u',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+	'b',			/*  __u8  Unicode */
+	0,				/*  __u8  Unicode */
+};
+
+static int r8a66597_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+			void *buffer, int transfer_len, struct devrequest *cmd)
+{
+	struct r8a66597 *r8a66597 = &gr8a66597;
+	int leni = transfer_len;
+	int len = 0;
+	int stat = 0;
+	__u16 bmRType_bReq;
+	__u16 wValue;
+	__u16 wIndex;
+	__u16 wLength;
+	unsigned char data[32];
+
+	R8A66597_DPRINT("%s\n", __func__);
+
+	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+		printf("Root-Hub submit IRQ: NOT implemented");
+		return 0;
+	}
+
+	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
+	wValue	      = cpu_to_le16 (cmd->value);
+	wIndex	      = cpu_to_le16 (cmd->index);
+	wLength	      = cpu_to_le16 (cmd->length);
+
+	switch (bmRType_bReq) {
+	case RH_GET_STATUS:
+		*(__u16 *)buffer = cpu_to_le16(1);
+		len = 2;
+		break;
+	case RH_GET_STATUS | RH_INTERFACE:
+		*(__u16 *)buffer = cpu_to_le16(0);
+		len = 2;
+		break;
+	case RH_GET_STATUS | RH_ENDPOINT:
+		*(__u16 *)buffer = cpu_to_le16(0);
+		len = 2;
+		break;
+	case RH_GET_STATUS | RH_CLASS:
+		*(__u32 *)buffer = cpu_to_le32(0);
+		len = 4;
+		break;
+	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+		*(__u32 *)buffer = cpu_to_le32(r8a66597->port_status |
+						(r8a66597->port_change << 16));
+		len = 4;
+		break;
+	case RH_CLEAR_FEATURE | RH_ENDPOINT:
+	case RH_CLEAR_FEATURE | RH_CLASS:
+		break;
+
+	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+		case RH_C_PORT_CONNECTION:
+			r8a66597->port_change &= ~USB_PORT_STAT_C_CONNECTION;
+			break;
+		}
+		break;
+
+	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+		switch (wValue) {
+		case (RH_PORT_SUSPEND):
+			break;
+		case (RH_PORT_RESET):
+			r8a66597_bus_reset(r8a66597, 0);
+			break;
+		case (RH_PORT_POWER):
+			break;
+		case (RH_PORT_ENABLE):
+			break;
+		}
+		break;
+	case RH_SET_ADDRESS:
+		gr8a66597.rh_devnum = wValue;
+		break;
+	case RH_GET_DESCRIPTOR:
+		switch ((wValue & 0xff00) >> 8) {
+		case (0x01): /* device descriptor */
+			len = min_t(unsigned int,
+				  leni,
+				  min_t(unsigned int,
+				      sizeof(root_hub_dev_des),
+				      wLength));
+			memcpy(buffer, root_hub_dev_des, len);
+			break;
+		case (0x02): /* configuration descriptor */
+			len = min_t(unsigned int,
+				  leni,
+				  min_t(unsigned int,
+				      sizeof(root_hub_config_des),
+				      wLength));
+			memcpy(buffer, root_hub_config_des, len);
+			break;
+		case (0x03): /* string descriptors */
+			if (wValue == 0x0300) {
+				len = min_t(unsigned int,
+					  leni,
+					  min_t(unsigned int,
+					      sizeof(root_hub_str_index0),
+					      wLength));
+				memcpy(buffer, root_hub_str_index0, len);
+			}
+			if (wValue == 0x0301) {
+				len = min_t(unsigned int,
+					  leni,
+					  min_t(unsigned int,
+					      sizeof(root_hub_str_index1),
+					      wLength));
+				memcpy(buffer, root_hub_str_index1, len);
+			}
+			break;
+		default:
+			stat = USB_ST_STALLED;
+		}
+		break;
+
+	case RH_GET_DESCRIPTOR | RH_CLASS:
+	{
+		__u32 temp = 0x00000001;
+
+		data[0] = 9;		/* min length; */
+		data[1] = 0x29;
+		data[2] = temp & RH_A_NDP;
+		data[3] = 0;
+		if (temp & RH_A_PSM)
+			data[3] |= 0x1;
+		if (temp & RH_A_NOCP)
+			data[3] |= 0x10;
+		else if (temp & RH_A_OCPM)
+			data[3] |= 0x8;
+
+		/* corresponds to data[4-7] */
+		data[5] = (temp & RH_A_POTPGT) >> 24;
+		data[7] = temp & RH_B_DR;
+		if (data[2] < 7) {
+			data[8] = 0xff;
+		} else {
+			data[0] += 2;
+			data[8] = (temp & RH_B_DR) >> 8;
+			data[10] = data[9] = 0xff;
+		}
+
+		len = min_t(unsigned int, leni,
+			    min_t(unsigned int, data[0], wLength));
+		memcpy(buffer, data, len);
+		break;
+	}
+
+	case RH_GET_CONFIGURATION:
+		*(__u8 *) buffer = 0x01;
+		len = 1;
+		break;
+	case RH_SET_CONFIGURATION:
+		break;
+	default:
+		dbg("unsupported root hub command");
+		stat = USB_ST_STALLED;
+	}
+
+	wait_ms(1);
+
+	len = min_t(int, len, leni);
+
+	dev->act_len = len;
+	dev->status = stat;
+
+	return stat;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+		    int transfer_len)
+{
+	struct r8a66597 *r8a66597 = &gr8a66597;
+	int ret = 0;
+
+	R8A66597_DPRINT("%s\n", __func__);
+	R8A66597_DPRINT("pipe = %08x, buffer = %p, len = %d, devnum = %d\n",
+			pipe, buffer, transfer_len, dev->devnum);
+
+	set_devadd_reg(r8a66597, dev->devnum, r8a66597->speed, 0, 0, 0);
+
+	pipe_buffer_setting(r8a66597, dev, pipe);
+
+	dev->act_len = 0;
+	while (dev->act_len < transfer_len && ret == 0) {
+		if (ctrlc())
+			return -1;
+
+		if (usb_pipein(pipe))
+			ret = receive_bulk_packet(r8a66597, dev, pipe, buffer,
+							transfer_len);
+		else
+			ret = send_bulk_packet(r8a66597, dev, pipe, buffer,
+							transfer_len);
+	}
+
+	if (ret == 0)
+		dev->status = 0;
+
+	return ret;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe,
+		       void *buffer, int transfer_len, struct devrequest *setup)
+{
+	struct r8a66597 *r8a66597 = &gr8a66597;
+	u16 r8a66597_address = setup->request == USB_REQ_SET_ADDRESS ?
+					0 : dev->devnum;
+
+	R8A66597_DPRINT("%s\n", __func__);
+	if (usb_pipedevice(pipe) == r8a66597->rh_devnum)
+		return r8a66597_submit_rh_msg(dev, pipe, buffer, transfer_len,
+						setup);
+
+	R8A66597_DPRINT("%s: setup\n", __func__);
+	set_devadd_reg(r8a66597, r8a66597_address, r8a66597->speed, 0, 0, 0);
+
+	if (send_setup_packet(r8a66597, dev, setup) < 0) {
+		printf("setup packet send error\n");
+		return -1;
+	}
+
+	if (usb_pipein(pipe))
+		if (receive_control_packet(r8a66597, dev, buffer,
+						transfer_len) < 0)
+			return -1;
+
+	if (send_status_packet(r8a66597, pipe) < 0)
+		return -1;
+
+	dev->status = 0;
+
+	return 0;
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+			int transfer_len, int interval)
+{
+	/* no implement */
+	R8A66597_DPRINT("%s\n", __func__);
+	return 0;
+}
+
+void usb_event_poll(void)
+{
+	/* no implement */
+	R8A66597_DPRINT("%s\n", __func__);
+}
+
+int usb_lowlevel_init(void)
+{
+	struct r8a66597 *r8a66597 = &gr8a66597;
+
+	R8A66597_DPRINT("%s\n", __func__);
+
+	memset(r8a66597, 0, sizeof(r8a66597));
+	r8a66597->reg = CONFIG_R8A66597_BASE_ADDR;
+
+	disable_controller(r8a66597);
+	wait_ms(100);
+
+	enable_controller(r8a66597);
+	r8a66597_port_power(r8a66597, 0 , 1);
+
+	/* check usb device */
+	check_usb_device_connecting(r8a66597);
+
+	wait_ms(50);
+
+	return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+	disable_controller(&gr8a66597);
+
+	return 0;
+}

drivers/usb/r8a66597.h

@@ -0,0 +1,659 @@
+/*
+ * R8A66597 HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __R8A66597_H__
+#define __R8A66597_H__
+
+#define SYSCFG0		0x00
+#define SYSCFG1		0x02
+#define SYSSTS0		0x04
+#define SYSSTS1		0x06
+#define DVSTCTR0	0x08
+#define DVSTCTR1	0x0A
+#define TESTMODE	0x0C
+#define PINCFG		0x0E
+#define DMA0CFG		0x10
+#define DMA1CFG		0x12
+#define CFIFO		0x14
+#define D0FIFO		0x18
+#define D1FIFO		0x1C
+#define CFIFOSEL	0x20
+#define CFIFOCTR	0x22
+#define CFIFOSIE	0x24
+#define D0FIFOSEL	0x28
+#define D0FIFOCTR	0x2A
+#define D1FIFOSEL	0x2C
+#define D1FIFOCTR	0x2E
+#define INTENB0		0x30
+#define INTENB1		0x32
+#define INTENB2		0x34
+#define BRDYENB		0x36
+#define NRDYENB		0x38
+#define BEMPENB		0x3A
+#define SOFCFG		0x3C
+#define INTSTS0		0x40
+#define INTSTS1		0x42
+#define INTSTS2		0x44
+#define BRDYSTS		0x46
+#define NRDYSTS		0x48
+#define BEMPSTS		0x4A
+#define FRMNUM		0x4C
+#define UFRMNUM		0x4E
+#define USBADDR		0x50
+#define USBREQ		0x54
+#define USBVAL		0x56
+#define USBINDX		0x58
+#define USBLENG		0x5A
+#define DCPCFG		0x5C
+#define DCPMAXP		0x5E
+#define DCPCTR		0x60
+#define PIPESEL		0x64
+#define PIPECFG		0x68
+#define PIPEBUF		0x6A
+#define PIPEMAXP	0x6C
+#define PIPEPERI	0x6E
+#define PIPE1CTR	0x70
+#define PIPE2CTR	0x72
+#define PIPE3CTR	0x74
+#define PIPE4CTR	0x76
+#define PIPE5CTR	0x78
+#define PIPE6CTR	0x7A
+#define PIPE7CTR	0x7C
+#define PIPE8CTR	0x7E
+#define PIPE9CTR	0x80
+#define PIPE1TRE	0x90
+#define PIPE1TRN	0x92
+#define PIPE2TRE	0x94
+#define PIPE2TRN	0x96
+#define PIPE3TRE	0x98
+#define PIPE3TRN	0x9A
+#define PIPE4TRE	0x9C
+#define	PIPE4TRN	0x9E
+#define	PIPE5TRE	0xA0
+#define	PIPE5TRN	0xA2
+#define DEVADD0		0xD0
+#define DEVADD1		0xD2
+#define DEVADD2		0xD4
+#define DEVADD3		0xD6
+#define DEVADD4		0xD8
+#define DEVADD5		0xDA
+#define DEVADD6		0xDC
+#define DEVADD7		0xDE
+#define DEVADD8		0xE0
+#define DEVADD9		0xE2
+#define DEVADDA		0xE4
+
+/* System Configuration Control Register */
+#define	XTAL		0xC000	/* b15-14: Crystal selection */
+#define	  XTAL48	 0x8000	  /* 48MHz */
+#define	  XTAL24	 0x4000	  /* 24MHz */
+#define	  XTAL12	 0x0000	  /* 12MHz */
+#define	XCKE		0x2000	/* b13: External clock enable */
+#define	PLLC		0x0800	/* b11: PLL control */
+#define	SCKE		0x0400	/* b10: USB clock enable */
+#define	PCSDIS		0x0200	/* b9: not CS wakeup */
+#define	LPSME		0x0100	/* b8: Low power sleep mode */
+#define	HSE		0x0080	/* b7: Hi-speed enable */
+#define	DCFM		0x0040	/* b6: Controller function select  */
+#define	DRPD		0x0020	/* b5: D+/- pull down control */
+#define	DPRPU		0x0010	/* b4: D+ pull up control */
+#define	USBE		0x0001	/* b0: USB module operation enable */
+
+/* System Configuration Status Register */
+#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
+#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
+#define	SOFEA		0x0020	/* b5: SOF monitor */
+#define	IDMON		0x0004	/* b3: ID-pin monitor */
+#define	LNST		0x0003	/* b1-0: D+, D- line status */
+#define	  SE1		 0x0003	  /* SE1 */
+#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
+#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
+#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
+#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
+#define	  SE0		 0x0000	  /* SE0 */
+
+/* Device State Control Register */
+#define	EXTLP0		0x0400	/* b10: External port */
+#define	VBOUT		0x0200	/* b9: VBUS output */
+#define	WKUP		0x0100	/* b8: Remote wakeup */
+#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
+#define	USBRST		0x0040	/* b6: USB reset enable */
+#define	RESUME		0x0020	/* b5: Resume enable */
+#define	UACT		0x0010	/* b4: USB bus enable */
+#define	RHST		0x0007	/* b1-0: Reset handshake status */
+#define	  HSPROC	 0x0004	  /* HS handshake is processing */
+#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
+#define	  FSMODE	 0x0002	  /* Full-Speed mode */
+#define	  LSMODE	 0x0001	  /* Low-Speed mode */
+#define	  UNDECID	 0x0000	  /* Undecided */
+
+/* Test Mode Register */
+#define	UTST			0x000F	/* b3-0: Test select */
+#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
+#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
+#define	  H_TST_K		 0x000A	  /* HOST TEST K */
+#define	  H_TST_J		 0x0009	  /* HOST TEST J */
+#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
+#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
+#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
+#define	  P_TST_K		 0x0002	  /* PERI TEST K */
+#define	  P_TST_J		 0x0001	  /* PERI TEST J */
+#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
+
+/* Data Pin Configuration Register */
+#define	LDRV			0x8000	/* b15: Drive Current Adjust */
+#define	  VIF1			  0x0000		/* VIF = 1.8V */
+#define	  VIF3			  0x8000		/* VIF = 3.3V */
+#define	INTA			0x0001	/* b1: USB INT-pin active */
+
+/* DMAx Pin Configuration Register */
+#define	DREQA			0x4000	/* b14: Dreq active select */
+#define	BURST			0x2000	/* b13: Burst mode */
+#define	DACKA			0x0400	/* b10: Dack active select */
+#define	DFORM			0x0380	/* b9-7: DMA mode select */
+#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
+#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
+#define	DENDA			0x0040	/* b6: Dend active select */
+#define	PKTM			0x0020	/* b5: Packet mode */
+#define	DENDE			0x0010	/* b4: Dend enable */
+#define	OBUS			0x0004	/* b2: OUTbus mode */
+
+/* CFIFO/DxFIFO Port Select Register */
+#define	RCNT		0x8000	/* b15: Read count mode */
+#define	REW		0x4000	/* b14: Buffer rewind */
+#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
+#define	DREQE		0x1000	/* b12: DREQ output enable */
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#define	MBW		0x0800
+#else
+#define	MBW		0x0400	/* b10: Maximum bit width for FIFO access */
+#endif
+#define	  MBW_8		 0x0000	  /*  8bit */
+#define	  MBW_16	 0x0400	  /* 16bit */
+#define	BIGEND		0x0100	/* b8: Big endian mode */
+#define	  BYTE_LITTLE	 0x0000		/* little dendian */
+#define	  BYTE_BIG	 0x0100		/* big endifan */
+#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
+#define	CURPIPE		0x000F	/* b2-0: PIPE select */
+
+/* CFIFO/DxFIFO Port Control Register */
+#define	BVAL		0x8000	/* b15: Buffer valid flag */
+#define	BCLR		0x4000	/* b14: Buffer clear */
+#define	FRDY		0x2000	/* b13: FIFO ready */
+#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
+
+/* Interrupt Enable Register 0 */
+#define	VBSE	0x8000	/* b15: VBUS interrupt */
+#define	RSME	0x4000	/* b14: Resume interrupt */
+#define	SOFE	0x2000	/* b13: Frame update interrupt */
+#define	DVSE	0x1000	/* b12: Device state transition interrupt */
+#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
+
+/* Interrupt Enable Register 1 */
+#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
+#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
+#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
+#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
+#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
+
+/* BRDY Interrupt Enable/Status Register */
+#define	BRDY9		0x0200	/* b9: PIPE9 */
+#define	BRDY8		0x0100	/* b8: PIPE8 */
+#define	BRDY7		0x0080	/* b7: PIPE7 */
+#define	BRDY6		0x0040	/* b6: PIPE6 */
+#define	BRDY5		0x0020	/* b5: PIPE5 */
+#define	BRDY4		0x0010	/* b4: PIPE4 */
+#define	BRDY3		0x0008	/* b3: PIPE3 */
+#define	BRDY2		0x0004	/* b2: PIPE2 */
+#define	BRDY1		0x0002	/* b1: PIPE1 */
+#define	BRDY0		0x0001	/* b1: PIPE0 */
+
+/* NRDY Interrupt Enable/Status Register */
+#define	NRDY9		0x0200	/* b9: PIPE9 */
+#define	NRDY8		0x0100	/* b8: PIPE8 */
+#define	NRDY7		0x0080	/* b7: PIPE7 */
+#define	NRDY6		0x0040	/* b6: PIPE6 */
+#define	NRDY5		0x0020	/* b5: PIPE5 */
+#define	NRDY4		0x0010	/* b4: PIPE4 */
+#define	NRDY3		0x0008	/* b3: PIPE3 */
+#define	NRDY2		0x0004	/* b2: PIPE2 */
+#define	NRDY1		0x0002	/* b1: PIPE1 */
+#define	NRDY0		0x0001	/* b1: PIPE0 */
+
+/* BEMP Interrupt Enable/Status Register */
+#define	BEMP9		0x0200	/* b9: PIPE9 */
+#define	BEMP8		0x0100	/* b8: PIPE8 */
+#define	BEMP7		0x0080	/* b7: PIPE7 */
+#define	BEMP6		0x0040	/* b6: PIPE6 */
+#define	BEMP5		0x0020	/* b5: PIPE5 */
+#define	BEMP4		0x0010	/* b4: PIPE4 */
+#define	BEMP3		0x0008	/* b3: PIPE3 */
+#define	BEMP2		0x0004	/* b2: PIPE2 */
+#define	BEMP1		0x0002	/* b1: PIPE1 */
+#define	BEMP0		0x0001	/* b0: PIPE0 */
+
+/* SOF Pin Configuration Register */
+#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
+#define	BRDYM		0x0040	/* b6: BRDY clear timing */
+#define	INTL		0x0020	/* b5: Interrupt sense select */
+#define	EDGESTS		0x0010	/* b4:  */
+#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
+#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
+#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
+#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
+
+/* Interrupt Status Register 0 */
+#define	VBINT	0x8000	/* b15: VBUS interrupt */
+#define	RESM	0x4000	/* b14: Resume interrupt */
+#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
+#define	DVST	0x1000	/* b12: Device state transition interrupt */
+#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
+#define	VBSTS	0x0080	/* b7: VBUS input port */
+#define	DVSQ	0x0070	/* b6-4: Device state */
+#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
+#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
+#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
+#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
+#define	  DS_SUSP	 0x0040	  /* Suspend */
+#define	  DS_CNFG	 0x0030	  /* Configured */
+#define	  DS_ADDS	 0x0020	  /* Address */
+#define	  DS_DFLT	 0x0010	  /* Default */
+#define	  DS_POWR	 0x0000	  /* Powered */
+#define	DVSQS		0x0030	/* b5-4: Device state */
+#define	VALID		0x0008	/* b3: Setup packet detected flag */
+#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
+#define	  CS_SQER	 0x0006	  /* Sequence error */
+#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
+#define	  CS_WRSS	 0x0004	  /* Control write status stage */
+#define	  CS_WRDS	 0x0003	  /* Control write data stage */
+#define	  CS_RDSS	 0x0002	  /* Control read status stage */
+#define	  CS_RDDS	 0x0001	  /* Control read data stage */
+#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
+
+/* Interrupt Status Register 1 */
+#define	OVRCR		0x8000	/* b15: Over-current interrupt */
+#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
+#define	DTCH		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
+#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
+#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
+
+/* Frame Number Register */
+#define	OVRN		0x8000	/* b15: Overrun error */
+#define	CRCE		0x4000	/* b14: Received data error */
+#define	FRNM		0x07FF	/* b10-0: Frame number */
+
+/* Micro Frame Number Register */
+#define	UFRNM		0x0007	/* b2-0: Micro frame number */
+
+/* Default Control Pipe Maxpacket Size Register */
+/* Pipe Maxpacket Size Register */
+#define	DEVSEL	0xF000	/* b15-14: Device address select */
+#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
+
+/* Default Control Pipe Control Register */
+#define	BSTS		0x8000	/* b15: Buffer status */
+#define	SUREQ		0x4000	/* b14: Send USB request  */
+#define	CSCLR		0x2000	/* b13: complete-split status clear */
+#define	CSSTS		0x1000	/* b12: complete-split status */
+#define	SUREQCLR	0x0800	/* b11: stop setup request */
+#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY		0x0020	/* b5: pipe busy */
+#define	PINGE		0x0010	/* b4: ping enable */
+#define	CCPL		0x0004	/* b2: Enable control transfer complete */
+#define	PID		0x0003	/* b1-0: Response PID */
+#define	  PID_STALL11	 0x0003	  /* STALL */
+#define	  PID_STALL	 0x0002	  /* STALL */
+#define	  PID_BUF	 0x0001	  /* BUF */
+#define	  PID_NAK	 0x0000	  /* NAK */
+
+/* Pipe Window Select Register */
+#define	PIPENM		0x0007	/* b2-0: Pipe select */
+
+/* Pipe Configuration Register */
+#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
+#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
+#define	  R8A66597_INT	 0x8000		  /* Interrupt */
+#define	  R8A66597_BULK	 0x4000		  /* Bulk */
+#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
+#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
+#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
+#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
+#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
+#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
+
+/* Pipe Buffer Configuration Register */
+#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
+#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
+#define	PIPE0BUF	256
+#define	PIPExBUF	64
+
+/* Pipe Maxpacket Size Register */
+#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
+
+/* Pipe Cycle Configuration Register */
+#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
+#define	IITV	0x0007	/* b2-0: Isochronous interval */
+
+/* Pipex Control Register */
+#define	BSTS	0x8000	/* b15: Buffer status */
+#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define	CSCLR	0x2000	/* b13: complete-split status clear */
+#define	CSSTS	0x1000	/* b12: complete-split status */
+#define	ATREPM	0x0400	/* b10: Auto repeat mode */
+#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
+#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY	0x0020	/* b5: pipe busy */
+#define	PID	0x0003	/* b1-0: Response PID */
+
+/* PIPExTRE */
+#define	TRENB		0x0200	/* b9: Transaction counter enable */
+#define	TRCLR		0x0100	/* b8: Transaction counter clear */
+
+/* PIPExTRN */
+#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
+
+/* DEVADDx */
+#define	UPPHUB		0x7800
+#define	HUBPORT		0x0700
+#define	USBSPD		0x00C0
+#define	RTPORT		0x0001
+
+#define R8A66597_MAX_NUM_PIPE		10
+#define R8A66597_BUF_BSIZE		8
+#define R8A66597_MAX_DEVICE		10
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+#define R8A66597_MAX_ROOT_HUB		1
+#else
+#define R8A66597_MAX_ROOT_HUB		2
+#endif
+#define R8A66597_MAX_SAMPLING		5
+#define R8A66597_RH_POLL_TIME		10
+
+#define BULK_IN_PIPENUM		3
+#define BULK_IN_BUFNUM		8
+
+#define BULK_OUT_PIPENUM	4
+#define BULK_OUT_BUFNUM		40
+
+#define check_bulk_or_isoc(pipenum)	((pipenum >= 1 && pipenum <= 5))
+#define check_interrupt(pipenum)	((pipenum >= 6 && pipenum <= 9))
+#define make_devsel(addr)		(addr << 12)
+
+struct r8a66597 {
+	unsigned long reg;
+	unsigned short pipe_config;	/* bit field */
+	unsigned short port_status;
+	unsigned short port_change;
+	u16 speed;	/* HSMODE or FSMODE or LSMODE */
+	unsigned char rh_devnum;
+};
+
+static inline u16 r8a66597_read(struct r8a66597 *r8a66597, unsigned long offset)
+{
+	return inw(r8a66597->reg + offset);
+}
+
+static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
+				      unsigned long offset, void *buf,
+				      int len)
+{
+	int i;
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+	unsigned long fifoaddr = r8a66597->reg + offset;
+	unsigned long count;
+	unsigned long *p = buf;
+
+	count = len / 4;
+	for (i = 0; i < count; i++)
+		inl(p[i], r8a66597->reg + offset);
+
+	if (len & 0x00000003) {
+		unsigned long tmp = inl(fifoaddr);
+		memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
+	}
+#else
+	unsigned short *p = buf;
+
+	len = (len + 1) / 2;
+	for (i = 0; i < len; i++)
+		p[i] = inw(r8a66597->reg + offset);
+#endif
+}
+
+static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
+				  unsigned long offset)
+{
+	outw(val, r8a66597->reg + offset);
+}
+
+static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
+				       unsigned long offset, void *buf,
+				       int len)
+{
+	int i;
+	unsigned long fifoaddr = r8a66597->reg + offset;
+#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
+	unsigned long count;
+	unsigned char *pb;
+	unsigned long *p = buf;
+
+	count = len / 4;
+	for (i = 0; i < count; i++)
+		outl(p[i], fifoaddr);
+
+	if (len & 0x00000003) {
+		pb = (unsigned char *)buf + count * 4;
+		for (i = 0; i < (len & 0x00000003); i++) {
+			if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+				outb(pb[i], fifoaddr + i);
+			else
+				outb(pb[i], fifoaddr + 3 - i);
+		}
+	}
+#else
+	int odd = len & 0x0001;
+	unsigned short *p = buf;
+
+	len = len / 2;
+	for (i = 0; i < len; i++)
+		outw(p[i], fifoaddr);
+
+	if (odd) {
+		unsigned char *pb = (unsigned char *)(buf + len);
+		outb(*pb, fifoaddr);
+	}
+#endif
+}
+
+static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
+				 u16 val, u16 pat, unsigned long offset)
+{
+	u16 tmp;
+	tmp = r8a66597_read(r8a66597, offset);
+	tmp = tmp & (~pat);
+	tmp = tmp | val;
+	r8a66597_write(r8a66597, tmp, offset);
+}
+
+#define r8a66597_bclr(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, 0, val, offset)
+#define r8a66597_bset(r8a66597, val, offset)	\
+			r8a66597_mdfy(r8a66597, val, 0, offset)
+
+static inline unsigned long get_syscfg_reg(int port)
+{
+	return port == 0 ? SYSCFG0 : SYSCFG1;
+}
+
+static inline unsigned long get_syssts_reg(int port)
+{
+	return port == 0 ? SYSSTS0 : SYSSTS1;
+}
+
+static inline unsigned long get_dvstctr_reg(int port)
+{
+	return port == 0 ? DVSTCTR0 : DVSTCTR1;
+}
+
+static inline unsigned long get_dmacfg_reg(int port)
+{
+	return port == 0 ? DMA0CFG : DMA1CFG;
+}
+
+static inline unsigned long get_intenb_reg(int port)
+{
+	return port == 0 ? INTENB1 : INTENB2;
+}
+
+static inline unsigned long get_intsts_reg(int port)
+{
+	return port == 0 ? INTSTS1 : INTSTS2;
+}
+
+static inline u16 get_rh_usb_speed(struct r8a66597 *r8a66597, int port)
+{
+	unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+	return r8a66597_read(r8a66597, dvstctr_reg) & RHST;
+}
+
+static inline void r8a66597_port_power(struct r8a66597 *r8a66597, int port,
+				       int power)
+{
+	unsigned long dvstctr_reg = get_dvstctr_reg(port);
+
+	if (power)
+		r8a66597_bset(r8a66597, VBOUT, dvstctr_reg);
+	else
+		r8a66597_bclr(r8a66597, VBOUT, dvstctr_reg);
+}
+
+#define get_pipectr_addr(pipenum)	(PIPE1CTR + (pipenum - 1) * 2)
+#define get_pipetre_addr(pipenum)	(PIPE1TRE + (pipenum - 1) * 4)
+#define get_pipetrn_addr(pipenum)	(PIPE1TRN + (pipenum - 1) * 4)
+#define get_devadd_addr(address)	(DEVADD0 + address * 2)
+
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h, based on usb_ohci.h) */
+
+/* destination of request */
+#define RH_INTERFACE		   0x01
+#define RH_ENDPOINT		   0x02
+#define RH_OTHER		   0x03
+
+#define RH_CLASS		   0x20
+#define RH_VENDOR		   0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS		0x0080
+#define RH_CLEAR_FEATURE	0x0100
+#define RH_SET_FEATURE		0x0300
+#define RH_SET_ADDRESS		0x0500
+#define RH_GET_DESCRIPTOR	0x0680
+#define RH_SET_DESCRIPTOR	0x0700
+#define RH_GET_CONFIGURATION	0x0880
+#define RH_SET_CONFIGURATION	0x0900
+#define RH_GET_STATE		0x0280
+#define RH_GET_INTERFACE	0x0A80
+#define RH_SET_INTERFACE	0x0B00
+#define RH_SYNC_FRAME		0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP		0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION	   0x00
+#define RH_PORT_ENABLE		   0x01
+#define RH_PORT_SUSPEND		   0x02
+#define RH_PORT_OVER_CURRENT	   0x03
+#define RH_PORT_RESET		   0x04
+#define RH_PORT_POWER		   0x08
+#define RH_PORT_LOW_SPEED	   0x09
+
+#define RH_C_PORT_CONNECTION	   0x10
+#define RH_C_PORT_ENABLE	   0x11
+#define RH_C_PORT_SUSPEND	   0x12
+#define RH_C_PORT_OVER_CURRENT	   0x13
+#define RH_C_PORT_RESET		   0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER	   0x00
+#define RH_C_HUB_OVER_CURRENT	   0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP	   0x00
+#define RH_ENDPOINT_STALL	   0x01
+
+#define RH_ACK			   0x01
+#define RH_REQ_ERR		   -1
+#define RH_NACK			   0x00
+
+/* OHCI ROOT HUB REGISTER MASKS */
+
+/* roothub.portstatus [i] bits */
+#define RH_PS_CCS	0x00000001	/* current connect status */
+#define RH_PS_PES	0x00000002	/* port enable status*/
+#define RH_PS_PSS	0x00000004	/* port suspend status */
+#define RH_PS_POCI	0x00000008	/* port over current indicator */
+#define RH_PS_PRS	0x00000010	/* port reset status */
+#define RH_PS_PPS	0x00000100	/* port power status */
+#define RH_PS_LSDA	0x00000200	/* low speed device attached */
+#define RH_PS_CSC	0x00010000	/* connect status change */
+#define RH_PS_PESC	0x00020000	/* port enable status change */
+#define RH_PS_PSSC	0x00040000	/* port suspend status change */
+#define RH_PS_OCIC	0x00080000	/* over current indicator change */
+#define RH_PS_PRSC	0x00100000	/* port reset status change */
+
+/* roothub.status bits */
+#define RH_HS_LPS	0x00000001	/* local power status */
+#define RH_HS_OCI	0x00000002	/* over current indicator */
+#define RH_HS_DRWE	0x00008000	/* device remote wakeup enable */
+#define RH_HS_LPSC	0x00010000	/* local power status change */
+#define RH_HS_OCIC	0x00020000	/* over current indicator change */
+#define RH_HS_CRWE	0x80000000	/* clear remote wakeup enable */
+
+/* roothub.b masks */
+#define RH_B_DR		0x0000ffff	/* device removable flags */
+#define RH_B_PPCM	0xffff0000	/* port power control mask */
+
+/* roothub.a masks */
+#define RH_A_NDP	(0xff << 0)	/* number of downstream ports */
+#define RH_A_PSM	(1 << 8)	/* power switching mode */
+#define RH_A_NPS	(1 << 9)	/* no power switching */
+#define RH_A_DT		(1 << 10)	/* device type (mbz) */
+#define RH_A_OCPM	(1 << 11)	/* over current protection mode */
+#define RH_A_NOCP	(1 << 12)	/* no over current protection */
+#define RH_A_POTPGT	(0xff << 24)	/* power on to power good time */
+
+#endif	/* __R8A66597_H__ */

drivers/usb/usbdcore.c

@@ -552,7 +552,7 @@ struct urb *usbd_alloc_urb (struct usb_device_instance *device,
 	struct urb *urb;
 
 	if (!(urb = (struct urb *) malloc (sizeof (struct urb)))) {
-		usberr (" F A T A L:  malloc(%u) FAILED!!!!",
+		usberr (" F A T A L:  malloc(%zu) FAILED!!!!",
 			sizeof (struct urb));
 		return NULL;
 	}

drivers/usb/usbdcore_omap1510.c

@@ -28,7 +28,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
+#if ((defined(CONFIG_OMAP1510) || defined(CONFIG_OMAP1610)) && defined(CONFIG_USB_DEVICE))
 
 #include <asm/io.h>
 #ifdef CONFIG_OMAP_SX1
@@ -1109,21 +1109,43 @@ int udc_init (void)
 	 */
 	outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
 	UDCREG (CLOCK_CTRL);
+
+#ifdef CONFIG_OMAP1510
+	/* This code was originally implemented for OMAP1510 and
+	 * therefore is only applicable for OMAP1510 boards. For
+	 * OMAP5912 or OMAP16xx the register APLL_CTRL does not
+	 * exist and DPLL_CTRL is already configured.
+	 */
+
 	/* Set and check APLL */
 	outw (0x0008, APLL_CTRL);
 	UDCREG (APLL_CTRL);
 	/* Set and check DPLL */
 	outw (0x2210, DPLL_CTRL);
 	UDCREG (DPLL_CTRL);
-	/* Set and check SOFT */
-	outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ);
+#endif
+	/* Set and check SOFT
+	 * The below line of code has been changed to perform a
+	 * read-modify-write instead of a simple write for
+	 * configuring the SOFT_REQ register. This allows the code
+	 * to be compatible with OMAP5912 and OMAP16xx devices
+	 */
+	outw ((1 << 4) | (1 << 3) | 1 | (inw(SOFT_REQ)), SOFT_REQ);
+
 	/* Short delay to wait for DPLL */
 	udelay (1000);
 
 	/* Print banner with device revision */
 	udc_rev = inw (UDC_REV) & 0xff;
+#ifdef CONFIG_OMAP1510
 	printf ("USB:   TI OMAP1510 USB function module rev %d.%d\n",
 		udc_rev >> 4, udc_rev & 0xf);
+#endif
+
+#ifdef CONFIG_OMAP1610
+	printf ("USB:   TI OMAP5912 USB function module rev %d.%d\n",
+		udc_rev >> 4, udc_rev & 0xf);
+#endif
 
 #ifdef CONFIG_OMAP_SX1
 	i2c_read (0x32, 0x04, 1, &value, 1);

drivers/video/atmel_lcdfb.c

@@ -100,7 +100,11 @@ void lcd_ctrl_init(void *lcdbase)
 			    value << ATMEL_LCDC_CLKVAL_OFFSET);
 
 	/* Initialize control register 2 */
+#ifdef CONFIG_AVR32
+	value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
+#else
 	value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE;
+#endif
 	if (panel_info.vl_tft)
 		value |= ATMEL_LCDC_DISTYPE_TFT;
 

drivers/video/cfb_console.c

@@ -751,24 +751,10 @@ void video_puts (const char *s)
 	fb ++;						\
 }
 
-#if !defined(VIDEO_FB_16BPP_PIXEL_SWAP)
 #define FILL_15BIT_555RGB(r,g,b) {			\
 	*(unsigned short *)fb = SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3))); \
 	fb += 2;					\
 }
-#else
-static int tgl;
-static unsigned short p0;
-#define FILL_15BIT_555RGB(r,g,b) {			\
-	if (!tgl++) {					\
-		p0 = SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3))); \
-	} else {					\
-		tgl=0;					\
-		*(unsigned long *)(fb-2) = (SWAP16((unsigned short)(((r>>3)<<10) | ((g>>3)<<5) | (b>>3)))<<16) | p0; \
-	}						\
-	fb += 2;					\
-}
-#endif
 
 #define FILL_16BIT_565RGB(r,g,b) {			\
 	*(unsigned short *)fb = SWAP16((unsigned short)((((r)>>3)<<11) | (((g)>>2)<<5) | ((b)>>3))); \
@@ -796,6 +782,20 @@ static unsigned short p0;
 }
 #endif
 
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+static void inline fill_555rgb_pswap(uchar *fb, int x,
+				     u8 r, u8 g, u8 b)
+{
+	ushort *dst = (ushort *)fb;
+	ushort color = (ushort)(((r >> 3) << 10) |
+				((g >> 3) << 5) |
+				(b >> 3));
+	if (x & 1)
+		*(--dst) = color;
+	else
+		*(++dst) = color;
+}
+#endif
 
 /*
  * Display the BMP file located at address bmp_image.
@@ -927,11 +927,20 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
 			break;
 		case GDF_15BIT_555RGB:
 			while (ycount--) {
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+				int xpos = x;
+#endif
 				WATCHDOG_RESET ();
 				xcount = width;
 				while (xcount--) {
 					cte = bmp->color_table[*bmap++];
+#if !defined(VIDEO_FB_16BPP_PIXEL_SWAP)
 					FILL_15BIT_555RGB (cte.red, cte.green, cte.blue);
+#else
+					fill_555rgb_pswap (fb, xpos++, cte.red,
+							   cte.green, cte.blue);
+					fb += 2;
+#endif
 				}
 				bmap += padded_line;
 				fb -= (VIDEO_VISIBLE_COLS + width) * VIDEO_PIXEL_SIZE;
@@ -993,10 +1002,19 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
 			break;
 		case GDF_15BIT_555RGB:
 			while (ycount--) {
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+				int xpos = x;
+#endif
 				WATCHDOG_RESET ();
 				xcount = width;
 				while (xcount--) {
+#if !defined(VIDEO_FB_16BPP_PIXEL_SWAP)
 					FILL_15BIT_555RGB (bmap[2], bmap[1], bmap[0]);
+#else
+					fill_555rgb_pswap (fb, xpos++, bmap[2],
+							   bmap[1], bmap[0]);
+					fb += 2;
+#endif
 					bmap += 3;
 				}
 				bmap += padded_line;
@@ -1071,7 +1089,9 @@ void logo_plot (void *screen, int width, int x, int y)
 	int ycount = VIDEO_LOGO_HEIGHT;
 	unsigned char r, g, b, *logo_red, *logo_blue, *logo_green;
 	unsigned char *source;
-	unsigned char *dest = (unsigned char *)screen + ((y * width * VIDEO_PIXEL_SIZE) + x);
+	unsigned char *dest = (unsigned char *)screen +
+			      ((y * width * VIDEO_PIXEL_SIZE) +
+			       x * VIDEO_PIXEL_SIZE);
 
 #ifdef CONFIG_VIDEO_BMP_LOGO
 	source = bmp_logo_bitmap;
@@ -1101,6 +1121,9 @@ void logo_plot (void *screen, int width, int x, int y)
 	}
 
 	while (ycount--) {
+#if defined(VIDEO_FB_16BPP_PIXEL_SWAP)
+		int xpos = x;
+#endif
 		xcount = VIDEO_LOGO_WIDTH;
 		while (xcount--) {
 			r = logo_red[*source - VIDEO_LOGO_LUT_OFFSET];
@@ -1119,15 +1142,7 @@ void logo_plot (void *screen, int width, int x, int y)
 				*(unsigned short *) dest =
 					SWAP16 ((unsigned short) (((r >> 3) << 10) | ((g >> 3) << 5) | (b >> 3)));
 #else
-				{
-					if (!tgl++) {
-						p0 = SWAP16 ((unsigned short) (((r >> 3) << 10) | ((g >> 3) << 5) | (b >> 3)));
-					} else {
-						*(unsigned long *)(dest-2) =
-							(SWAP16 ((unsigned short) (((r >> 3) << 10) | ((g >> 3) << 5) | (b >> 3)))<<16) | p0;
-						tgl=0;
-					}
-				}
+				fill_555rgb_pswap (dest, xpos++, r, g, b);
 #endif
 				break;
 			case GDF_16BIT_565RGB:

include/api_public.h

@@ -126,6 +126,7 @@ typedef unsigned long lbastart_t;
 #define DT_STOR_SCSI	0x0020
 #define DT_STOR_USB	0x0040
 #define DT_STOR_MMC	0x0080
+#define DT_STOR_SATA	0x0100
 
 #define DEV_STA_CLOSED	0x0000		/* invalid, closed */
 #define DEV_STA_OPEN	0x0001		/* open i.e. active */

include/asm-arm/arch-at91rm9200/AT91RM9200.h

@@ -25,6 +25,7 @@
 #ifndef AT91RM9200_H
 #define AT91RM9200_H
 
+#ifndef __ASSEMBLY__
 typedef volatile unsigned int AT91_REG;		/* Hardware register definition */
 
 /*****************************************************************************/
@@ -780,4 +781,5 @@ typedef struct _AT91S_PDC
 #define AT91C_PIOB_ODR		((AT91_REG *)	0xFFFFF614) /* (PIOB) Output Disable Registerr */
 #define AT91C_PIOB_PDSR		((AT91_REG *)	0xFFFFF63C) /* (PIOB) Pin Data Status Register */
 
-#endif
+#endif /* __ASSEMBLY__ */
+#endif /* AT91RM9200_H */

include/asm-arm/arch-mx31/mx31-regs.h

@@ -126,17 +126,32 @@
 #define MUX_CTL_CSPI2_SS2	0x87
 #define MUX_CTL_CSPI2_MOSI	0x8b
 
-/* The modes a specific pin can be in
- * these macros can be used in mx31_gpio_mux() and have the form
+/*
+ * Helper macros for the MUX_[contact name]__[pin function] macros
+ */
+#define IOMUX_MODE_POS 9
+#define IOMUX_MODE(contact, mode) (((mode) << IOMUX_MODE_POS) | (contact))
+
+/*
+ * These macros can be used in mx31_gpio_mux() and have the form
  * MUX_[contact name]__[pin function]
  */
-#define MUX_RXD1__UART1_RXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
-#define MUX_TXD1__UART1_TXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
-#define MUX_RTS1__UART1_RTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
-#define MUX_RTS1__UART1_CTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
+#define MUX_RXD1__UART1_RXD_MUX	IOMUX_MODE(MUX_CTL_RXD1, MUX_CTL_FUNC)
+#define MUX_TXD1__UART1_TXD_MUX	IOMUX_MODE(MUX_CTL_TXD1, MUX_CTL_FUNC)
+#define MUX_RTS1__UART1_RTS_B	IOMUX_MODE(MUX_CTL_RTS1, MUX_CTL_FUNC)
+#define MUX_CTS1__UART1_CTS_B	IOMUX_MODE(MUX_CTL_CTS1, MUX_CTL_FUNC)
 
-#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
-#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
+#define MUX_CSPI2_SS0__CSPI2_SS0_B IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS1__CSPI2_SS1_B IOMUX_MODE(MUX_CTL_CSPI2_SS1, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS2__CSPI2_SS2_B IOMUX_MODE(MUX_CTL_CSPI2_SS2, MUX_CTL_FUNC)
+#define MUX_CSPI2_MOSI__CSPI2_MOSI IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_FUNC)
+#define MUX_CSPI2_MISO__CSPI2_MISO IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_FUNC)
+#define MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B \
+	IOMUX_MODE(MUX_CTL_CSPI2_SPI_RDY, MUX_CTL_FUNC)
+#define MUX_CSPI2_SCLK__CSPI2_CLK IOMUX_MODE(MUX_CTL_CSPI2_SCLK, MUX_CTL_FUNC)
+
+#define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1)
+#define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1)
 
 /*
  * Memory regions and CS

include/asm-avr32/io.h

@@ -22,6 +22,8 @@
 #ifndef __ASM_AVR32_IO_H
 #define __ASM_AVR32_IO_H
 
+#include <asm/types.h>
+
 #ifdef __KERNEL__
 
 /*

include/asm-avr32/sysreg.h

@@ -273,7 +273,9 @@
 	 | SYSREG_BF(name,value))
 
 /* Register access macros */
-#define sysreg_read(reg)		__builtin_mfsr(SYSREG_##reg)
-#define sysreg_write(reg, value)	__builtin_mtsr(SYSREG_##reg, value)
+#define sysreg_read(reg)				\
+	((unsigned long)__builtin_mfsr(SYSREG_##reg))
+#define sysreg_write(reg, value)			\
+	__builtin_mtsr(SYSREG_##reg, value)
 
 #endif /* __ASM_AVR32_SYSREG_H__ */

include/asm-nios2/types.h

@@ -52,6 +52,9 @@ typedef unsigned long long u64;
 /* Dma addresses are 32-bits wide.  */
 
 typedef u32 dma_addr_t;
+
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
 #endif /* __KERNEL__ */
 
 #endif /* __ASM_NIOS2_TYPES_H */

include/asm-ppc/fsl_lbc.h

@@ -298,4 +298,13 @@
 #define LCRR_CLKDIV_4			0x00000004
 #define LCRR_CLKDIV_8			0x00000008
 
+/* LTEDR - Transfer Error Check Disable Register
+ */
+#define LTEDR_BMD	0x80000000 /* Bus monitor disable				*/
+#define LTEDR_PARD	0x20000000 /* Parity error checking disabled			*/
+#define LTEDR_WPD	0x04000000 /* Write protect error checking diable		*/
+#define LTEDR_WARA	0x00800000 /* Write-after-read-atomic error checking diable	*/
+#define LTEDR_RAWA	0x00400000 /* Read-after-write-atomic error checking disable	*/
+#define LTEDR_CSD	0x00080000 /* Chip select error checking disable		*/
+
 #endif /* __ASM_PPC_FSL_LBC_H */

include/asm-ppc/global_data.h

@@ -51,6 +51,9 @@ typedef	struct	global_data {
 	unsigned long	cpm_clk;
 	unsigned long	scc_clk;
 	unsigned long	brg_clk;
+#ifdef CONFIG_PCI
+	unsigned long	pci_clk;
+#endif
 #endif
 	unsigned long   mem_clk;
 #if defined(CONFIG_MPC83XX)