Release v1.3.1

Signed-off-by: Wolfgang Denk <wd@denx.de>

.gitignore

@@ -0,0 +1,13 @@
+*.orig
+*.a
+*.o
+*.depend
+System.map
+/u-boot
+/u-boot.map
+/u-boot.bin
+/u-boot.srec
+/LOG
+/errlog
+/reloc_off
+

MAKEALL

@@ -301,10 +301,12 @@ LIST_83xx="		\
 	MPC8313ERDB_66	\
 	MPC8323ERDB	\
 	MPC832XEMDS	\
+	MPC832XEMDS_ATM	\
 	MPC8349EMDS	\
 	MPC8349ITX	\
 	MPC8349ITXGP	\
 	MPC8360EMDS	\
+	MPC8360EMDS_ATM	\
 	sbc8349		\
 	TQM834x		\
 "
@@ -376,6 +378,7 @@ LIST_7xx="		\
 
 LIST_ppc="		\
 	${LIST_5xx}	\
+	${LIST_512x}	\
 	${LIST_5xxx}	\
 	${LIST_8xx}	\
 	${LIST_8220}	\
@@ -552,6 +555,7 @@ LIST_mips5kc_el=""
 
 LIST_au1xx0_el="	\
 	dbau1550_el	\
+	pb1000		\
 "
 
 LIST_mips_el="			\

Makefile

@@ -23,8 +23,8 @@
 
 VERSION = 1
 PATCHLEVEL = 3
-SUBLEVEL = 0
-EXTRAVERSION = -rc3
+SUBLEVEL = 1
+EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
@@ -205,22 +205,30 @@ LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs
 	fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
-LIBS += rtc/librtc.a
-LIBS += dtt/libdtt.a
-LIBS += drivers/libdrivers.a
 LIBS += drivers/bios_emulator/libatibiosemu.a
-LIBS += drivers/nand/libnand.a
-LIBS += drivers/nand_legacy/libnand_legacy.a
-LIBS += drivers/onenand/libonenand.a
+LIBS += drivers/block/libblock.a
+LIBS += drivers/hwmon/libhwmon.a
+LIBS += drivers/i2c/libi2c.a
+LIBS += drivers/input/libinput.a
+LIBS += drivers/misc/libmisc.a
+LIBS += drivers/mtd/libmtd.a
+LIBS += drivers/mtd/nand/libnand.a
+LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
+LIBS += drivers/mtd/onenand/libonenand.a
 LIBS += drivers/net/libnet.a
+LIBS += drivers/net/sk98lin/libsk98lin.a
+LIBS += drivers/pci/libpci.a
+LIBS += drivers/pcmcia/libpcmcia.a
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/qe.a
 endif
 ifeq ($(CPU),mpc85xx)
 LIBS += drivers/qe/qe.a
 endif
+LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
-LIBS += drivers/sk98lin/libsk98lin.a
+LIBS += drivers/usb/libusb.a
+LIBS += drivers/video/libvideo.a
 LIBS += post/libpost.a post/drivers/libpostdrivers.a
 LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
 	"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
@@ -323,25 +331,65 @@ env:
 depend dep:	version
 		for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
+TAG_SUBDIRS += include
+TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
+TAG_SUBDIRS += cpu/$(CPU)
+TAG_SUBDIRS += lib_$(ARCH)
+TAG_SUBDIRS += fs/cramfs
+TAG_SUBDIRS += fs/fat
+TAG_SUBDIRS += fs/fdos
+TAG_SUBDIRS += fs/jffs2
+TAG_SUBDIRS += net
+TAG_SUBDIRS += disk
+TAG_SUBDIRS += common
+TAG_SUBDIRS += drivers/bios_emulator
+TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/hwmon
+TAG_SUBDIRS += drivers/i2c
+TAG_SUBDIRS += drivers/input
+TAG_SUBDIRS += drivers/misc
+TAG_SUBDIRS += drivers/mtd
+TAG_SUBDIRS += drivers/mtd/nand
+TAG_SUBDIRS += drivers/mtd/nand_legacy
+TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/net
+TAG_SUBDIRS += drivers/net/sk98lin
+TAG_SUBDIRS += drivers/pci
+TAG_SUBDIRS += drivers/pcmcia
+TAG_SUBDIRS += drivers/qe
+TAG_SUBDIRS += drivers/rtc
+TAG_SUBDIRS += drivers/serial
+TAG_SUBDIRS += drivers/usb
+TAG_SUBDIRS += drivers/video
+
 tags ctags:
-		ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
-				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
-				fs/cramfs fs/fat fs/fdos fs/jffs2 \
-				net disk rtc dtt drivers drivers/sk98lin common \
-			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+		ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+						-name '*.[ch]' -print`
 
 etags:
-		etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
-				lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
-				fs/cramfs fs/fat fs/fdos fs/jffs2 \
-				net disk rtc dtt drivers drivers/sk98lin common \
-			\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+		etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+						-name '*.[ch]' -print`
 
 $(obj)System.map:	$(obj)u-boot
 		@$(NM) $< | \
 		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
 		sort > $(obj)System.map
 
+#
+# Auto-generate the autoconf.mk file (which is included by all makefiles)
+#
+# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
+# the dep file is only include in this top level makefile to determine when
+# to regenerate the autoconf.mk file.
+$(OBJTREE)/include/autoconf.mk: $(obj)include/config.h
+	@echo Generating include/autoconf.mk
+	@# Generate the dependancies
+	@$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep
+	@# Extract the config macros
+	@$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed >> $@
+
+sinclude $(OBJTREE)/include/autoconf.mk.dep
+
 #########################################################################
 else
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
@@ -361,7 +409,8 @@ CHANGELOG:
 
 unconfig:
 	@rm -f $(obj)include/config.h $(obj)include/config.mk \
-		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp
+		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
+		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
 
 #========================================================================
 # PowerPC
@@ -1733,9 +1782,13 @@ M54455EVB_i66_config :	unconfig
 	>include/config.h ; \
 	if [ "$${FLASH}" == "INTEL" ] ; then \
 		echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		echo "... with INTEL boot..." ; \
 	else \
 		echo "#define CFG_ATMEL_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
 		echo "... with ATMEL boot..." ; \
 	fi; \
 	echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
@@ -1766,7 +1819,8 @@ MPC8323ERDB_config:	unconfig
 MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config:	unconfig
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1781,10 +1835,17 @@ MPC832XEMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
 
@@ -1808,7 +1869,8 @@ MPC8349ITXGP_config:	unconfig
 MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config:	unconfig
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
@@ -1823,10 +1885,17 @@ MPC8360EMDS_SLAVE_config:	unconfig
 	if [ "$(findstring _33_,$@)" ] ; then \
 		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
 		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+	fi ; \
+	if [ "$(findstring _ATM_,$@)" ] ; then \
+		echo -n "...ATM..." ; \
+		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
 

README

@@ -2123,7 +2123,7 @@ to save the current settings.
 	to be a good choice since it makes it far enough from the
 	start of the data area as well as from the stack pointer.
 
-Please note that the environment is read-only as long as the monitor
+Please note that the environment is read-only until the monitor
 has been relocated to RAM and a RAM copy of the environment has been
 created; also, when using EEPROM you will have to use getenv_r()
 until then to read environment variables.

blackfin_config.mk

@@ -21,4 +21,4 @@
 # MA 02111-1307 USA
 #
 
-PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN
+PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__BLACKFIN__

board/ads5121/u-boot.lds

@@ -51,6 +51,7 @@ SECTIONS
   {
     cpu/mpc512x/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)

board/amcc/sequoia/cmd_sequoia.c

@@ -25,6 +25,7 @@
 #include <common.h>
 #include <command.h>
 #include <i2c.h>
+#include <asm/io.h>
 
 /*
  * There are 2 versions of production Sequoia & Rainier platforms.
@@ -39,7 +40,7 @@
  * All Sequoias & Rainiers select from two possible EEPROMs in Boot
  * Config F. One for 33MHz PCI, one for 66MHz PCI. The following
  * values are for the 33MHz PCI configuration. Byte 5 (0 base) is
- * the only  value affected for a 66MHz PCI and simply needs a +0x10.
+ * the only value affected for a 33MHz PCI and simply needs a | 0x08.
  */
 
 #define NAND_COMPATIBLE	0x01
@@ -56,6 +57,7 @@ static char *config_labels[] = {
 	"CPU: 416 PLB: 166 OPB: 83 EBC: 55",
 	"CPU: 500 PLB: 166 OPB: 83 EBC: 55",
 	"CPU: 533 PLB: 133 OPB: 66 EBC: 66",
+	"CPU: 667 PLB: 133 OPB: 66 EBC: 66",
 	"CPU: 667 PLB: 166 OPB: 83 EBC: 55",
 	NULL
 };
@@ -96,6 +98,11 @@ static u8 boot_configs[][17] = {
 		0x87, 0x78, 0x82, 0x52, 0x09, 0x57, 0xa0, 0x30, 0x40,
 		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
 	},
+	{
+		(NOR_COMPATIBLE),
+		0x87, 0x78, 0xa2, 0x56, 0x09, 0x57, 0xa0, 0x30, 0x40,
+		0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+	},
 	{
 		(NAND_COMPATIBLE | NOR_COMPATIBLE),
 		0x87, 0x78, 0xa2, 0x52, 0x09, 0xd7, 0xa0, 0x30, 0x40,
@@ -200,8 +207,12 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	/* check CPLD register +5 for PCI 66MHz flag */
-	if (in8(CFG_BCSR_BASE + 5) & 0x01)
-		buf[5] += 0x10;
+	if ((in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN) == 0)
+		/*
+		 * PLB-to-PCI divisor = 3 for 33MHz sync PCI
+		 * instead of 2 for 66MHz systems
+		 */
+		buf[5] |= 0x08;
 
 	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
 		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);

board/amcc/sequoia/sequoia.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
@@ -24,6 +24,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <ppc440.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -362,8 +363,8 @@ int checkboard(void)
 	printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
 #endif
 
-	rev = in8(CFG_BCSR_BASE + 0);
-	val = in8(CFG_BCSR_BASE + 5) & 0x01;
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {

board/amcc/yosemite/yosemite.c

@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2006-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,6 +24,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <spd_sdram.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -181,8 +184,8 @@ int checkboard(void)
 	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
 #endif
 
-	rev = *(u8 *)(CFG_CPLD + 0);
-	val = *(u8 *)(CFG_CPLD + 5) & 0x01;
+	rev = in_8((void *)(CFG_BCSR_BASE + 0));
+	val = in_8((void *)(CFG_BCSR_BASE + 5)) & CFG_BCSR5_PCI66EN;
 	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
 
 	if (s != NULL) {

board/cds/common/ft_board.c

@@ -37,6 +37,10 @@ static void cds_pci_fixup(void *blob)
 
 	map = ft_get_prop(blob, "/" OF_SOC "/pci@8000/interrupt-map", &len);
 
+	if (!map)
+		map = ft_get_prop(blob, "/" OF_PCI "/interrupt-map", &len);
+
+	if (map) {
 		len /= sizeof(u32);
 
 		slot = get_pci_slot();
@@ -49,6 +53,9 @@ static void cds_pci_fixup(void *blob)
 
 			map+=7;
 		}
+	} else {
+		printf("*** Warning - No PCI node found\n");
+	}
 }
 #endif
 

board/cds/mpc8541cds/u-boot.lds

@@ -69,7 +69,7 @@ SECTIONS
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
-    drivers/tsec.o (.text)
+    drivers/net/tsec.o (.text)
     cpu/mpc85xx/speed.o (.text)
     cpu/mpc85xx/pci.o (.text)
     common/dlmalloc.o (.text)

board/cds/mpc8548cds/u-boot.lds

@@ -69,7 +69,7 @@ SECTIONS
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
-    drivers/tsec.o (.text)
+    drivers/net/tsec.o (.text)
     cpu/mpc85xx/speed.o (.text)
     common/dlmalloc.o (.text)
     lib_generic/crc32.o (.text)

board/cds/mpc8555cds/u-boot.lds

@@ -69,7 +69,7 @@ SECTIONS
     cpu/mpc85xx/interrupts.o (.text)
     cpu/mpc85xx/cpu_init.o (.text)
     cpu/mpc85xx/cpu.o (.text)
-    drivers/tsec.o (.text)
+    drivers/net/tsec.o (.text)
     cpu/mpc85xx/speed.o (.text)
     cpu/mpc85xx/pci.o (.text)
     common/dlmalloc.o (.text)

board/cm5200/cm5200.c

@@ -276,7 +276,7 @@ static void ft_blob_update(void *blob, bd_t *bd)
 	memory_data[0] = cpu_to_be32(bd->bi_memstart);
 	memory_data[1] = cpu_to_be32(bd->bi_memsize);
 
-	nodeoffset = fdt_find_node_by_path (blob, "/memory");
+	nodeoffset = fdt_path_offset (blob, "/memory");
 	if (nodeoffset >= 0) {
 		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
 					sizeof(memory_data));

board/cogent/u-boot.lds

@@ -55,6 +55,7 @@ SECTIONS
   {
     *(.text)
     common/environment.o(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;

board/dbau1x00/dbau1x00.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include <asm/au1x00.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 
 long int initdram(int board_type)
 {
@@ -77,6 +78,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #ifdef CONFIG_IDE_PCMCIA
 	/* Enable 3.3 V on slot 0 ( VCC )
 	   No 5V */

board/dbau1x00/u-boot.lds

@@ -43,21 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/freescale/common/pixis.c

@@ -207,13 +207,16 @@ void read_from_px_regs_altbank(int set)
 	out8(PIXIS_BASE + PIXIS_VCFGEN1, tmp);
 }
 
+#ifndef CFG_PIXIS_VBOOT_MASK
+#define CFG_PIXIS_VBOOT_MASK	0x40
+#endif
 
 void set_altbank(void)
 {
 	u8 tmp;
 
 	tmp = in8(PIXIS_BASE + PIXIS_VBOOT);
-	tmp ^= 0x40;
+	tmp ^= CFG_PIXIS_VBOOT_MASK;
 
 	out8(PIXIS_BASE + PIXIS_VBOOT, tmp);
 }

board/freescale/common/pq-mds-pib.c

@@ -79,19 +79,19 @@ int pib_init(void)
 
 	printf("QOC3 ATM card on PMC0\n");
 #elif defined(CONFIG_MPC832XEMDS)
-	val = 0;
-	i2c_write(0x26, 0x7, 1, &val, 1);
-	val = 0xf7;
-	i2c_write(0x26, 0x3, 1, &val, 1);
+	val8 = 0;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+	val8 = 0xf7;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
 
-	val = 0;
-	i2c_write(0x21, 0x6, 1, &val, 1);
-	i2c_write(0x21, 0x7, 1, &val, 1);
+	val8 = 0;
+	i2c_write(0x21, 0x6, 1, &val8, 1);
+	i2c_write(0x21, 0x7, 1, &val8, 1);
 
-	val = 0xdf;
-	i2c_write(0x21, 0x2, 1, &val, 1);
-	val = 0xef;
-	i2c_write(0x21, 0x3, 1, &val, 1);
+	val8 = 0xdf;
+	i2c_write(0x21, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x21, 0x3, 1, &val8, 1);
 
 	eieio();
 

board/freescale/m54455evb/config.mk

@@ -22,4 +22,6 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)

board/freescale/m54455evb/u-boot.atm

@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5445x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/freescale/m54455evb/u-boot.int

@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf5445x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}

board/freescale/mpc832xemds/pci.c

@@ -269,7 +269,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(hose[0].first_busno);
 		tmp[1] = cpu_to_be32(hose[0].last_busno);

board/freescale/mpc8349emds/pci.c

@@ -396,7 +396,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
@@ -408,7 +408,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 				  tmp, sizeof(tmp[0]));
 	}
 #ifdef CONFIG_MPC83XX_PCI2
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);

board/freescale/mpc8349itx/pci.c

@@ -342,7 +342,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
@@ -354,7 +354,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 				  tmp, sizeof(tmp[0]));
 	}
 #ifdef CONFIG_MPC83XX_PCI2
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
 		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);

board/freescale/mpc8360emds/pci.c

@@ -269,7 +269,7 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(hose[0].first_busno);
 		tmp[1] = cpu_to_be32(hose[0].last_busno);

board/freescale/mpc8544ds/mpc8544ds.c

@@ -227,7 +227,7 @@ pci_init_board(void)
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
 		 */
-		in_be32(CFG_PCIE3_MEM_BASE);
+		in_be32((u32 *)CFG_PCIE3_MEM_BASE);
 	} else {
 		printf ("    PCIE3: disabled\n");
 	}

board/gth2/gth2.c

@@ -26,14 +26,13 @@
 #include <asm/au1x00.h>
 #include <asm/addrspace.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 #include <watchdog.h>
 
 #include "ee_access.h"
 
 static int wdi_status = 0;
 
-unsigned long mips_io_port_base = 0;
-
 #define SDRAM_SIZE ((64*1024*1024)-(12*4096))
 
 
@@ -147,6 +146,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #ifdef CONFIG_IDE_PCMCIA
 	/* PCMCIA is on a 36 bit physical address.
 	   We need to map it into a 32 bit addresses */
@@ -429,7 +431,7 @@ int misc_init_r(void){
 	    (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
 		printf ("*** ethernet addr invalid, using default ***\n");
 	} else {
-		setenv ("ethaddr", Rx);
+		setenv ("ethaddr", (char *)Rx);
 	}
 	return (0);
 }

board/gth2/lowlevel_init.S

@@ -413,7 +413,9 @@ noCacheJump:
 	j clearmem
 	nop
 
+#if 0
 	.globl	memtest
+#endif
 memtest:
 	/* Fill memory with address */
 	li	t0, 0x80000000
@@ -434,7 +436,9 @@ mt1:	lw	t2, 0(t0)
 	bne	t1, zero, mt1
 	nop
 	nop
+#if 0
 	.globl	clearmem
+#endif
 clearmem:
 		/* Clear memory */
 	li	t0, 0x80000000

board/gth2/u-boot.lds

@@ -43,20 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
 
+	.got : {
 	  __got_start = .;
-	.got  : { *(.got) }
+	  *(.got)
 	  __got_end = .;
+	}
 
 	.sdata  : { *(.sdata) }
 
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/hymod/u-boot.lds

@@ -69,6 +69,7 @@ SECTIONS
     common/environment.o(.text)
 
     *(.text)
+    *(.fixup)
     *(.got1)
   }
   _etext = .;

board/ids8247/ids8247.c

@@ -25,6 +25,12 @@
 #include <ioports.h>
 #include <mpc8260.h>
 
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -38,12 +44,12 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port A configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
-	/* PA30 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
-	/* PA29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
-	/* PA28 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
-	/* PA27 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
-	/* PA26 */ {   0,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
+	/* PA31 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 COL */
+	/* PA30 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 CRS */
+	/* PA29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXER */
+	/* PA28 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC1 TXEN */
+	/* PA27 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXDV */
+	/* PA26 */ {   1,   1,	 1,   0,   0,	0   }, /* FCC1 RXER */
 	/* PA25 */ {   0,   0,	 0,   0,   1,	0   }, /* 8247_P0 */
 #if defined(CONFIG_SOFT_I2C)
 	/* PA24 */ {   1,   0,	 0,   0,   1,	1   }, /* I2C_SDA2 */
@@ -53,14 +59,14 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PA23 */ {   0,   0,	 0,   1,   0,	0   }, /* PA23 */
 #endif
 	/* PA22 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_DCD */
-	/* PA21 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
-	/* PA20 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
-	/* PA19 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
-	/* PA18 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
-	/* PA17 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
-	/* PA16 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
-	/* PA15 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
-	/* PA14 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
+	/* PA21 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD3 */
+	/* PA20 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD2 */
+	/* PA19 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD1 */
+	/* PA18 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC1 TXD0 */
+	/* PA17 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD0 */
+	/* PA16 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD1 */
+	/* PA15 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD2 */
+	/* PA14 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 RXD3 */
 	/* PA13 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_RTS */
 	/* PA12 */ {   0,   0,	 0,   0,   1,	0   }, /* SMC2_CTS */
 	/* PA11 */ {   0,   0,	 0,   1,   1,	0   }, /* SMC2_DTR */
@@ -79,20 +85,20 @@ const iop_conf_t iop_conf_tab[4][32] = {
 
     /* Port B configuration */
     {	/*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
+	/* PB31 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   0,   1,	 1,   1,   0,	0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII COL */
+	/* PB26 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   0,   1,	 0,   1,   0,	0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   0,   1,	 0,   0,   0,	0   }, /* FCC2 MII RxD[3] */
 	/* PB17 */ {   0,   0,	 0,   0,   0,	0   }, /* PB17 */
 	/* PB16 */ {   0,   0,	 0,   0,   0,	0   }, /* PB16 */
 	/* PB15 */ {   0,   0,	 0,   0,   0,	0   }, /* PB15 */
@@ -123,8 +129,8 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PC26 */ {   0,   0,	 0,   1,   0,	0   }, /* PC26 */
 	/* PC25 */ {   0,   1,	 1,   0,   0,	0   }, /* SYNC_IN */
 	/* PC24 */ {   0,   0,	 0,   1,   0,	0   }, /* PC24 */
-	/* PC23 */ {   0,   1,	 0,   1,   0,	0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,	 0,   0,   0,	0   }, /* ATMRFCLK */
+	/* PC23 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII TX_CLK */
+	/* PC22 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC1 MII RX_CLK */
 	/* PC21 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN RXCLK */
 	/* PC20 */ {   0,   1,	 0,   0,   0,	0   }, /* SCC1 EN TXCLK */
 	/* PC19 */ {   1,   1,	 0,   0,   0,	0   }, /* FCC2 MII RX_CLK */
@@ -180,7 +186,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
 	/* PD10 */ {   0,   0,	 0,   0,   0,	0   }, /* PD10 */
 	/* PD9	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD9 */
 	/* PD8	*/ {   0,   0,	 0,   0,   0,	0   }, /* PD8 */
-	/* PD7	*/ {   0,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
+	/* PD7	*/ {   1,   0,	 0,   1,   0,	1   }, /* MII_MDIO */
 	/* PD6	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD6 */
 	/* PD5	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD5 */
 	/* PD4	*/ {   0,   0,	 0,   1,   0,	1   }, /* PD4 */
@@ -224,7 +230,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
 	 * mapped by the controller. That means, that the initial mapping has
 	 * to be (at least) twice as large as the maximum expected size.
 	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
+	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
 
 	sdmr_ptr = &memctl->memc_psdmr;
 	orx_ptr = &memctl->memc_or2;
@@ -315,4 +321,38 @@ nand_init (void)
 	printf ("%4lu MB\n", totlen >>20);
 }
 
-#endif
+#endif	/* CFG_CMD_NAND */
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+/*
+ * update "memory" property in the blob
+ */
+void ft_blob_update(void *blob, bd_t *bd)
+{
+	int ret, nodeoffset = 0;
+	ulong memory_data[2] = {0};
+
+	memory_data[0] = cpu_to_be32(bd->bi_memstart);
+	memory_data[1] = cpu_to_be32(bd->bi_memsize);
+
+	nodeoffset = fdt_find_node_by_path (blob, "/memory");
+	if (nodeoffset >= 0) {
+		ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
+					sizeof(memory_data));
+	if (ret < 0)
+		printf("ft_blob_update): cannot set /memory/reg "
+			"property err:%s\n", fdt_strerror(ret));
+	}
+	else {
+		/* memory node is required in dts */
+		printf("ft_blob_update(): cannot find /memory node "
+		"err:%s\n", fdt_strerror(nodeoffset));
+	}
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup( blob, bd);
+	ft_blob_update(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */

board/incaip/incaip.c

@@ -25,7 +25,7 @@
 #include <command.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
-
+#include <asm/io.h>
 
 extern uint incaip_get_cpuclk(void);
 
@@ -85,7 +85,6 @@ long int initdram(int board_type)
 
 int checkboard (void)
 {
-
 	unsigned long chipid = *INCA_IP_WDT_CHIPID;
 	int part_num;
 
@@ -107,5 +106,7 @@ int checkboard (void)
 
 	printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }

board/incaip/u-boot.lds

@@ -43,21 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/innokom/innokom.c

@@ -72,7 +72,7 @@ int i2c_init_board(void)
 
 int misc_init_r(void)
 {
-	uchar *str;
+	char *str;
 
 	/* determine if the software update key is pressed during startup   */
 	if (GPLR0 & 0x00000800) {

board/lwmon5/lwmon5.c

@@ -96,6 +96,23 @@ int board_early_init_f(void)
 
 	gpio_write_bit(CFG_GPIO_FLASH_WP, 1);
 
+	/*
+	 * Reset PHY's:
+	 * The PHY's need a 2nd reset pulse, since the MDIO address is latched
+	 * upon reset, and with the first reset upon powerup, the addresses are
+	 * not latched reliable, since the IRQ line is multiplexed with an
+	 * MDIO address. A 2nd reset at this time will make sure, that the
+	 * correct address is latched.
+	 */
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
+	udelay(1000);
+	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
+	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
+
 	return 0;
 }
 
@@ -230,15 +247,6 @@ int misc_init_r(void)
 	/* Write lime controller memory parameters */
 	out_be32((void *)CFG_LIME_MMR, CFG_LIME_MMR_VALUE);
 
-	/*
-	 * Reset PHY's
-	 */
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 0);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 0);
-	udelay(100);
-	gpio_write_bit(CFG_GPIO_PHY0_RST, 1);
-	gpio_write_bit(CFG_GPIO_PHY1_RST, 1);
-
 	/*
 	 * Init display controller
 	 */

board/m5282evb/m5282evb.c

@@ -89,4 +89,5 @@ long int initdram (int board_type)
 		/* Write to the SDRAM Mode Register */
 		*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
 	}
+	return dramsize;
 }

board/motionpro/motionpro.c

@@ -138,6 +138,12 @@ long int initdram(int board_type)
 #ifndef CFG_RAMBOOT
 	ulong test1, test2;
 
+	/* According to AN3221 (MPC5200B SDRAM Initialization and
+	 * Configuration), the SDelay register must be written a value of
+	 * 0x00000004 as the first step of the SDRAM contorller configuration.
+	 */
+	*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+
 	/* configure SDRAM start/end for detection */
 	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
 	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */

board/mousse/u-boot.lds

@@ -60,6 +60,7 @@ SECTIONS
     lib_generic/crc32.o		(.text)
     lib_generic/zlib.o		(.text)
 
+    *(.fixup)
     *(.got1)
     . = ALIGN(16);
     *(.rodata)

board/mpl/vcma9/cmd_vcma9.c

@@ -31,7 +31,7 @@
 #include "../common/common_util.h"
 
 #if defined(CONFIG_DRIVER_CS8900)
-#include <../drivers/cs8900.h>
+#include <../drivers/net/cs8900.h>
 
 static uchar cs8900_chksum(ushort data)
 {

board/mpl/vcma9/flash.c

@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/mpl/vcma9/vcma9.h

@@ -128,7 +128,7 @@ typedef struct {
 } /*__attribute__((__packed__))*/ VCMA9_PLD;
 
 #define VCMA9_PLD_BASE	0x2C000100
-static inline VCMA9_PLD * const VCMA9_GetBase_PLD(void)
+static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
 {
 	return (VCMA9_PLD * const)VCMA9_PLD_BASE;
 }

board/netstar/eeprom.c

@@ -26,7 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
 

board/pb1x00/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	= $(BOARD).o flash.o
-SOBJS	= memsetup.o
+SOBJS	= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/pb1x00/lowlevel_init.S

@@ -15,8 +15,8 @@
 	.set noreorder
 	.set mips32
 
-	.globl	memsetup
-memsetup:
+	.globl	lowlevel_init
+lowlevel_init:
 	/*
 	 * Step 1) Establish CPU endian mode.
 	 * NOTE: A fair amount of code is necessary on the Pb1000 to

board/pb1x00/pb1x00.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include <asm/au1x00.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 
 long int initdram(int board_type)
 {
@@ -41,7 +42,9 @@ void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
 
 int checkboard (void)
 {
+#if defined(CONFIG_IDE_PCMCIA) && 0
 	u16 status;
+#endif
 	/* volatile u32 *pcmcia_bcsr = (u32*)(DB1000_BCSR_ADDR+0x10); */
 	volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
 	u32 proc_id;
@@ -69,6 +72,9 @@ int checkboard (void)
 	default:
 		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
 	}
+
+	set_io_port_base(0);
+
 #if defined(CONFIG_IDE_PCMCIA) && 0
 	/* Enable 3.3 V on slot 0 ( VCC )
 	   No 5V */

board/pb1x00/u-boot.lds

@@ -43,20 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
 
+	.got : {
 	  __got_start = .;
-	.got  : { *(.got) }
+	  *(.got)
 	  __got_end = .;
+	}
 
 	.sdata  : { *(.sdata) }
 
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/pleb2/flash.c

@@ -196,7 +196,7 @@ void flash_print_info (flash_info_t * info)
 	int i;
 	uchar *boottype;
 	uchar *bootletter;
-	uchar *fmt;
+	char *fmt;
 	uchar botbootletter[] = "B";
 	uchar topbootletter[] = "T";
 	uchar botboottype[] = "bottom boot sector";

board/purple/flash.c

@@ -299,7 +299,7 @@ void flash_print_info (flash_info_t *info)
 	int i;
 	uchar *boottype;
 	uchar *bootletter;
-	uchar *fmt;
+	char *fmt;
 	uchar botbootletter[] = "B";
 	uchar topbootletter[] = "T";
 	uchar botboottype[] = "bottom boot sector";

board/purple/purple.c

@@ -26,6 +26,7 @@
 #include <asm/inca-ip.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
+#include <asm/io.h>
 #include <asm/addrspace.h>
 #include <asm/cacheops.h>
 
@@ -145,6 +146,8 @@ int checkboard (void)
 
 	printf("CPU Speed %d MHz\n", CPU_CLOCK_RATE/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }
 

board/purple/u-boot.lds

@@ -53,21 +53,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/pxa255_idp/Makefile

@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	:= pxa_idp.o
-SOBJS	:= memsetup.o
+SOBJS	:= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/pxa255_idp/config.mk

@@ -1,3 +1,3 @@
 #TEXT_BASE = 0xa1700000
-TEXT_BASE = 0xa3000000
+TEXT_BASE = 0xa3080000
 #TEXT_BASE = 0

board/pxa255_idp/lowlevel_init.S

@@ -3,7 +3,7 @@
  *
  * NOTE: I haven't clean this up considerably, just enough to get it
  * running. See hal_platform_setup.h for the source. See
- * board/cradle/memsetup.S for another PXA250 setup that is
+ * board/cradle/lowlevel_init.S for another PXA250 setup that is
  * much cleaner.
  *
  * See file CREDITS for list of people who contributed to this
@@ -41,8 +41,8 @@ DRAM_SIZE:  .long   CFG_DRAM_SIZE
 /*
  * 	Memory setup
  */
-.globl memsetup
-memsetup:
+.globl lowlevel_init
+lowlevel_init:
 
 	mov      r10, lr
 
@@ -426,7 +426,7 @@ initclks:
 	bl 	blink
 #endif
 
-endmemsetup:
+endlowlevel_init:
 
 	mov     pc, r10
 

board/pxa255_idp/u-boot.lds

@@ -44,6 +44,7 @@ SECTIONS
 	. = ALIGN(4);
 	.got : { *(.got) }
 
+	. = .;
 	__u_boot_cmd_start = .;
 	.u_boot_cmd : { *(.u_boot_cmd) }
 	__u_boot_cmd_end = .;

board/rsdproto/rsdproto.c

@@ -210,7 +210,7 @@ void read_RS5C372_time (struct tm *timedate)
 
 #define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)
 
-	if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
+	if (! i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {
 		timedate->tm_sec = BCD_TO_BIN (buffer[0]);
 		timedate->tm_min = BCD_TO_BIN (buffer[1]);
 		timedate->tm_hour = BCD_TO_BIN (buffer[2]);
@@ -231,7 +231,7 @@ int read_LM84_temp (int address)
 	unsigned char buffer[8];
 	/*int rc;*/
 
-	if (i2c_read (address, 0, 1, buffer, 1)) {
+	if (! i2c_read (address, 0, 1, buffer, 1)) {
 		return (int) buffer[0];
 	} else {
 		/*printf("i2c error %02x\n", rc); */

board/rsdproto/u-boot.lds

@@ -55,6 +55,7 @@ SECTIONS
   {
     cpu/mpc8260/start.o	(.text)
     *(.text)
+    *(.fixup)
     *(.got1)
     /*. = env_offset; */
   }

board/sbc2410x/flash.c

@@ -288,7 +288,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/smdk2410/flash.c

@@ -290,7 +290,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
  * Copy memory to flash
  */
 
-volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+static int write_hword (flash_info_t * info, ulong dest, ushort data)
 {
 	vu_short *addr = (vu_short *) dest;
 	ushort result;

board/tb0229/tb0229.c

@@ -13,10 +13,9 @@
 #include <command.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
+#include <asm/io.h>
 #include <pci.h>
 
-unsigned long mips_io_port_base = 0;
-
 #if defined(CONFIG_PCI)
 static struct pci_controller hose;
 
@@ -26,17 +25,17 @@ void pci_init_board (void)
 }
 #endif
 
-
 long int initdram(int board_type)
 {
 	return get_ram_size (CFG_SDRAM_BASE, 0x8000000);
 }
 
-
 int checkboard (void)
 {
 	printf("Board: TANBAC TB0229 ");
 	printf("(CPU Speed %d MHz)\n", (int)CPU_CLOCK_RATE/1000000);
 
+	set_io_port_base(0);
+
 	return 0;
 }

board/tb0229/u-boot.lds

@@ -43,21 +43,22 @@ SECTIONS
 	. = ALIGN(4);
 	.data  : { *(.data) }
 
-	. = ALIGN(4);
-	.sdata  : { *(.sdata) }
-
-	_gp = ALIGN(16);
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata) }
-
 	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata) }
+
+	.u_boot_cmd : {
 	  __u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+	  *(.u_boot_cmd)
 	  __u_boot_cmd_end = .;
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;

board/tqm5200/cmd_stk52xx.c

@@ -561,7 +561,7 @@ void led_init(void)
 	gpt->gpt6.emsr |=  0x00000024;
 	gpt->gpt7.emsr |=  0x00000024;
 
-
+#ifndef CONFIG_TQM5200S
 	/* enable SM501 GPIO control (in both power modes) */
 	*(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |=
 		POWER_MODE_GATE_GPIO_PWM_I2C;
@@ -574,6 +574,7 @@ void led_init(void)
 
 	/* configure SM501 gpio pins 48-51 as output */
 	*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16);
+#endif /* !CONFIG_TQM5200S */
 }
 
 /*
@@ -650,7 +651,7 @@ int do_led(char *argv[])
 			gpt->gpt7.emsr &=  ~(1 << 4);
 		}
 		break;
-
+#ifndef CONFIG_TQM5200S
 	case 24:
 		if (strcmp (argv[3], "on") == 0) {
 			*(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |=
@@ -730,7 +731,7 @@ int do_led(char *argv[])
 				~(0x1 << 19);
 		}
 		break;
-
+#endif /* !CONFIG_TQM5200S */
 	default:
 		printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]);
 		return 1;
@@ -1110,7 +1111,7 @@ int do_rs232(char *argv[])
 	return error_status;
 }
 
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 static void sm501_backlight (unsigned int state)
 {
 	if (state == BL_ON) {
@@ -1120,7 +1121,7 @@ static void sm501_backlight (unsigned int state)
 		*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
 			~((1 << 26) | (1 << 27));
 }
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 
 int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -1160,7 +1161,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			else
 				printf ("Error\n");
 			return rcode;
-#ifndef CONFIG_FO300
+#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S)
 		} else if (strncmp (argv[1], "backlight", 4) == 0) {
 			if (strncmp (argv[2], "on", 2) == 0) {
 				sm501_backlight (BL_ON);
@@ -1170,7 +1171,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				sm501_backlight (BL_OFF);
 				return 0;
 			}
-#endif
+#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */
 		}
 		break;
 
@@ -1228,8 +1229,10 @@ U_BOOT_CMD(
 	"     - loopback plug for X83 required\n"
 	"fkt rs232 number\n"
 	"     - loopback plug(s) for X2 required\n"
+#ifndef CONFIG_TQM5200S
 	"fkt backlight on/off\n"
 	"     - switch backlight on or off\n"
+#endif /* !CONFIG_TQM5200S */
 );
 #elif defined(CONFIG_FO300)
 U_BOOT_CMD(

board/tqm5200/tqm5200.c

@@ -441,15 +441,23 @@ ulong post_word_load (void)
 }
 #endif	/* CONFIG_POST || CONFIG_LOGBUFFER*/
 
-#ifdef CONFIG_PS2MULT
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {
+	extern int usb_cpu_init(void);
+
+#ifdef CONFIG_PS2MULT
 	ps2mult_early_init();
+#endif /* CONFIG_PS2MULT */
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+	/* Low level USB init, required for proper kernel operation */
+	usb_cpu_init();
+#endif
+
 	return (0);
 }
 #endif
-#endif /* CONFIG_PS2MULT */
 
 #ifdef CONFIG_FO300
 int silent_boot (void)
@@ -543,6 +551,7 @@ int last_stage_init (void)
 		__asm__ volatile ("sync");
 	}
 
+#ifndef CONFIG_TQM5200S	/* The TQM5200S has no SM501 grafic controller */
 	/*
 	 * Check for Grafic Controller
 	 */
@@ -584,6 +593,7 @@ int last_stage_init (void)
 		disable_ctrlc(1);
 	}
 #endif
+#endif /* !CONFIG_TQM5200S */
 
 	return 0;
 }

board/tqm8xx/tqm8xx.c

@@ -354,6 +354,8 @@ long int initdram (int board_type)
 	udelay (10000);
 
 #ifdef	CONFIG_CAN_DRIVER
+	/* UPM initialization for CAN @ CLKOUT <= 66 MHz */
+
 	/* Initialize OR3 / BR3 */
 	memctl->memc_or3 = CFG_OR3_CAN;
 	memctl->memc_br3 = CFG_BR3_CAN;
@@ -362,7 +364,7 @@ long int initdram (int board_type)
 	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */
 
 	/* Initialize UPMB for CAN: single read */
-	memctl->memc_mdr = 0xFFFFC004;
+	memctl->memc_mdr = 0xFFFFCC04;
 	memctl->memc_mcr = 0x0100 | UPMB;
 
 	memctl->memc_mdr = 0x0FFFD004;
@@ -374,23 +376,23 @@ long int initdram (int board_type)
 	memctl->memc_mdr = 0x3FFFC004;
 	memctl->memc_mcr = 0x0103 | UPMB;
 
-	memctl->memc_mdr = 0xFFFFDC05;
+	memctl->memc_mdr = 0xFFFFDC07;
 	memctl->memc_mcr = 0x0104 | UPMB;
 
 	/* Initialize UPMB for CAN: single write */
-	memctl->memc_mdr = 0xFFFCC004;
+	memctl->memc_mdr = 0xFFFCCC04;
 	memctl->memc_mcr = 0x0118 | UPMB;
 
-	memctl->memc_mdr = 0xCFFCD004;
+	memctl->memc_mdr = 0xCFFCDC04;
 	memctl->memc_mcr = 0x0119 | UPMB;
 
-	memctl->memc_mdr = 0x0FFCC000;
+	memctl->memc_mdr = 0x3FFCC000;
 	memctl->memc_mcr = 0x011A | UPMB;
 
-	memctl->memc_mdr = 0x7FFCC004;
+	memctl->memc_mdr = 0xFFFCC004;
 	memctl->memc_mcr = 0x011B | UPMB;
 
-	memctl->memc_mdr = 0xFFFDCC05;
+	memctl->memc_mdr = 0xFFFDC405;
 	memctl->memc_mcr = 0x011C | UPMB;
 #endif							/* CONFIG_CAN_DRIVER */
 

board/voiceblue/eeprom.c

@@ -26,7 +26,7 @@
 
 #include <common.h>
 #include <exports.h>
-#include "../drivers/smc91111.h"
+#include "../drivers/net/smc91111.h"
 
 #define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
 

board/wepep250/flash.c

@@ -44,6 +44,7 @@
 
 #if ( WEP_FLASH_BUS_WIDTH == 1 )
 #  define FLASH_BUS vu_char
+#  define FLASH_BUS_RET u_char
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  else
@@ -53,6 +54,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 2 )
 #  define FLASH_BUS vu_short
+#  define FLASH_BUS_RET u_short
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -64,6 +66,7 @@
 
 #elif ( WEP_FLASH_BUS_WIDTH == 4 )
 #  define FLASH_BUS vu_long
+#  define FLASH_BUS_RET u_long
 #  if ( WEP_FLASH_INTERLEAVE == 1 )
 #    define FLASH_CMD( x ) x
 #  elif ( WEP_FLASH_INTERLEAVE == 2 )
@@ -81,7 +84,7 @@
 
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
-static FLASH_BUS flash_status_reg (void)
+static FLASH_BUS_RET flash_status_reg (void)
 {
 
 	FLASH_BUS *addr = (FLASH_BUS *) 0;

board/xsengine/flash.c

@@ -46,11 +46,11 @@ unsigned long flash_init (void)
 	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
 		switch (i) {
 		case 0:
-			flash_get_size ((long *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_size ((vu_long *) PHYS_FLASH_1, &flash_info[i]);
 			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
 			break;
 		case 1:
-			flash_get_size ((long *) PHYS_FLASH_2, &flash_info[i]);
+			flash_get_size ((vu_long *) PHYS_FLASH_2, &flash_info[i]);
 			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
 			break;
 		default:

common/Makefile

@@ -27,32 +27,113 @@ LIB	= $(obj)libcommon.a
 
 AOBJS	=
 
-COBJS	= main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \
-	  cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \
-	  cmd_cache.o cmd_console.o \
-	  cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \
-	  cmd_eeprom.o cmd_elf.o cmd_ext2.o \
-	  cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \
-	  cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \
-	  cmd_load.o cmd_log.o \
-	  cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \
-	  cmd_nand.o cmd_net.o cmd_nvedit.o \
-	  cmd_onenand.o \
-	  cmd_pci.o cmd_pcmcia.o cmd_portio.o \
-	  cmd_reginfo.o cmd_reiser.o cmd_sata.o cmd_scsi.o cmd_spi.o \
-	  cmd_universe.o cmd_usb.o cmd_vfd.o \
-	  command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
-	  environment.o env_common.o \
-	  env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
-	  env_onenand.o env_nvram.o env_nowhere.o \
-	  exports.o \
-	  fdt_support.o flash.o fpga.o ft_build.o \
-	  hush.o kgdb.o lcd.o lists.o lynxkdi.o \
-	  memsize.o miiphybb.o miiphyutil.o \
-	  s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
-	  usb.o usb_kbd.o usb_storage.o \
-	  virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o
+COBJS-y += main.o
+COBJS-y += ACEX1K.o
+COBJS-y += altera.o
+COBJS-y += bedbug.o
+COBJS-y += circbuf.o
+COBJS-y += cmd_autoscript.o
+COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
+COBJS-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o
+COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o
+COBJS-y += cmd_boot.o
+COBJS-y += cmd_bootm.o
+COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o
+COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
+COBJS-$(CONFIG_CMD_DATE) += cmd_date.o
+ifdef CONFIG_4xx
+COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
+endif
+ifdef CONFIG_POST
+COBJS-$(CONFIG_CMD_DIAG) += cmd_diag.o
+endif
+COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o
+COBJS-$(CONFIG_CMD_DOC) += cmd_doc.o
+COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o
+COBJS-y += cmd_eeprom.o
+COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
+COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
+COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
+COBJS-y += cmd_fdc.o
+COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o
+COBJS-$(CONFIG_CMD_FDOS) += cmd_fdos.o
+COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o
+ifdef CONFIG_FPGA
+COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
+endif
+COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
+COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
+COBJS-$(CONFIG_CMD_IMMAP) += cmd_immap.o
+COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
+COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
+COBJS-y += cmd_load.o
+COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
+COBJS-y += cmd_mem.o
+COBJS-$(CONFIG_CMD_MII) += cmd_mii.o
+COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
+COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
+COBJS-y += cmd_nand.o
+COBJS-$(CONFIG_CMD_NET) += cmd_net.o
+COBJS-y += cmd_nvedit.o
+COBJS-y += cmd_onenand.o
+ifdef CONFIG_PCI
+COBJS-$(CONFIG_CMD_PCI) += cmd_pci.o
+endif
+COBJS-y += cmd_pcmcia.o
+COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o
+COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
+COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
+COBJS-y += cmd_sata.o
+COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
+COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
+COBJS-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
+COBJS-$(CONFIG_CMD_USB) += cmd_usb.o
+COBJS-y += cmd_vfd.o
+COBJS-y += command.o
+COBJS-y += console.o
+COBJS-y += cyclon2.o
+COBJS-y += devices.o
+COBJS-y += dlmalloc.o
+COBJS-y += docecc.o
+COBJS-y += environment.o
+COBJS-y += env_common.o
+COBJS-y += env_nand.o
+COBJS-y += env_dataflash.o
+COBJS-y += env_flash.o
+COBJS-y += env_eeprom.o
+COBJS-y += env_onenand.o
+COBJS-y += env_nvram.o
+COBJS-y += env_nowhere.o
+COBJS-y += exports.o
+COBJS-y += fdt_support.o
+COBJS-y += flash.o
+COBJS-y += fpga.o
+COBJS-y += ft_build.o
+COBJS-y += hush.o
+COBJS-y += kgdb.o
+COBJS-y += lcd.o
+COBJS-y += lists.o
+COBJS-y += lynxkdi.o
+COBJS-y += memsize.o
+COBJS-y += miiphybb.o
+COBJS-y += miiphyutil.o
+COBJS-y += s_record.o
+COBJS-y += serial.o
+COBJS-y += soft_i2c.o
+COBJS-y += soft_spi.o
+COBJS-y += spartan2.o
+COBJS-y += spartan3.o
+COBJS-y += usb.o
+COBJS-y += usb_kbd.o
+COBJS-y += usb_storage.o
+COBJS-y += virtex2.o
+COBJS-y += xilinx.o
+COBJS-y += crc16.o
+COBJS-y += xyzModem.o
+COBJS-y += cmd_mac.o
+COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(AOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS))
 

common/cmd_bdinfo.c

@@ -30,7 +30,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_BDI)
 static void print_num(const char *, ulong);
 
 #ifndef CONFIG_ARM	/* PowerPC and other */
@@ -350,4 +349,3 @@ U_BOOT_CMD(
 	"bdinfo  - print Board Info structure\n",
 	NULL
 );
-#endif

common/cmd_bedbug.c

@@ -13,8 +13,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_BEDBUG)
-
 #ifndef MAX
 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 #endif
@@ -413,7 +411,6 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
 	    "rdump   - Show registers.\n", " - Show registers.\n");
 /* ====================================================================== */
-#endif
 
 
 /*

common/cmd_bmp.c

@@ -31,8 +31,6 @@
 #include <asm/byteorder.h>
 #include <malloc.h>
 
-#if defined(CONFIG_CMD_BMP)
-
 static int bmp_info (ulong addr);
 static int bmp_display (ulong addr, int x, int y);
 
@@ -187,5 +185,3 @@ static int bmp_display(ulong addr, int x, int y)
 # error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO
 #endif
 }
-
-#endif /* defined(CONFIG_CMD_BMP) */

common/cmd_bootm.c

@@ -466,7 +466,7 @@ U_BOOT_CMD(
  	"\t'arg' can be the address of an initrd image\n"
 #if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)
 	"\tWhen booting a Linux kernel which requires a flat device-tree\n"
-	"\ta third argument is required which is the address of the of the\n"
+	"\ta third argument is required which is the address of the\n"
 	"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
 	"\tuse a '-' for the second argument. If you do not pass a third\n"
 	"\ta bd_info struct will be passed instead\n"

common/cmd_console.c

@@ -28,8 +28,6 @@
 #include <command.h>
 #include <devices.h>
 
-#if defined(CONFIG_CMD_CONSOLE)
-
 extern void _do_coninfo (void);
 int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char *argv[])
 {
@@ -67,5 +65,3 @@ U_BOOT_CMD(
 	"coninfo - print console devices and information\n",
 	""
 );
-
-#endif

common/cmd_date.c

@@ -31,8 +31,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_CMD_DATE)
-
 const char *weekdays[] = {
 	"Sun", "Mon", "Tues", "Wednes", "Thurs", "Fri", "Satur",
 };
@@ -210,5 +208,3 @@ U_BOOT_CMD(
 	"  - with numeric argument: set the system date & time\n"
 	"  - with 'reset' argument: reset the RTC\n"
 );
-
-#endif

common/cmd_dcr.c

@@ -29,8 +29,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
-
 unsigned long get_dcr (unsigned short);
 unsigned long set_dcr (unsigned short, unsigned long);
 
@@ -245,5 +243,3 @@ U_BOOT_CMD(
 	"setidcr - Set a register value via indirect DCR addressing\n",
 	"adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
 );
-
-#endif

common/cmd_diag.c

@@ -28,8 +28,6 @@
 #include <command.h>
 #include <post.h>
 
-#if defined(CONFIG_CMD_DIAG) && defined(CONFIG_POST)
-
 int do_diag (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned int i;
@@ -76,5 +74,3 @@ U_BOOT_CMD(
 	"diag run [test1 [test2]]\n"
 	"         - run specified tests\n"
 );
-
-#endif

common/cmd_display.c

@@ -24,8 +24,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_DISPLAY)
-
 #undef DEBUG_DISP
 
 #define DISP_SIZE	8
@@ -78,5 +76,3 @@ U_BOOT_CMD(
 	"    - with <string> argument: display <string> on dot matrix display\n"
 	"    - without arguments: clear dot matrix display\n"
 );
-
-#endif

common/cmd_doc.c

@@ -11,9 +11,6 @@
 #include <command.h>
 #include <malloc.h>
 #include <asm/io.h>
-
-#if defined(CONFIG_CMD_DOC)
-
 #include <linux/mtd/nftl.h>
 #include <linux/mtd/doc2000.h>
 
@@ -1607,5 +1604,3 @@ void doc_probe(unsigned long physadr)
 		puts ("No DiskOnChip found\n");
 	}
 }
-
-#endif

common/cmd_dtt.c

@@ -25,8 +25,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_DTT)
-
 #include <dtt.h>
 #include <i2c.h>
 
@@ -57,8 +55,6 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
 	  dtt,	1,	1,	do_dtt,
-	  "dtt     - Digital Thermometer and Themostat\n",
+	  "dtt     - Digital Thermometer and Thermostat\n",
 	  "        - Read temperature from digital thermometer and thermostat.\n"
 );
-
-#endif

common/cmd_elf.c

@@ -23,8 +23,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-#if defined(CONFIG_CMD_ELF)
-
 #ifndef MAX
 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 #endif
@@ -323,5 +321,3 @@ U_BOOT_CMD(
 	"bootvx  - Boot vxWorks from an ELF image\n",
 	" [address] - load address of vxWorks ELF image.\n"
 );
-
-#endif

common/cmd_ext2.c

@@ -34,8 +34,6 @@
  */
 #include <common.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_EXT2)
 #include <config.h>
 #include <command.h>
 #include <image.h>
@@ -259,5 +257,3 @@ U_BOOT_CMD(
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
 	"      to address 'addr' from ext2 filesystem\n"
 );
-
-#endif

common/cmd_fat.c

@@ -30,11 +30,6 @@
 #include <net.h>
 #include <ata.h>
 #include <part.h>
-
-#if defined(CONFIG_CMD_FAT)
-
-#undef	DEBUG
-
 #include <fat.h>
 
 
@@ -323,5 +318,3 @@ void hexdump (int cnt, unsigned char *data)
 	}
 }
 #endif	/* NOT_IMPLEMENTED_YET */
-
-#endif

common/cmd_fdos.c

@@ -31,8 +31,6 @@
 #include <command.h>
 #include <fdc.h>
 
-#if defined(CONFIG_CMD_FDOS)
-
 /*-----------------------------------------------------------------------------
  * do_fdosboot --
  *-----------------------------------------------------------------------------
@@ -153,5 +151,3 @@ U_BOOT_CMD(
 	"fdosls  - list files in a directory\n",
 	"[directory]\n"
 );
-
-#endif

common/cmd_fdt.c

@@ -28,9 +28,6 @@
 #include <command.h>
 #include <linux/ctype.h>
 #include <linux/types.h>
-
-#ifdef CONFIG_OF_LIBFDT
-
 #include <asm/global_data.h>
 #include <fdt.h>
 #include <libfdt.h>
@@ -47,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR;
 static int fdt_valid(void);
 static int fdt_parse_prop(char *pathp, char *prop, char *newval,
 	char *data, int *len);
-static int fdt_print(char *pathp, char *prop, int depth);
+static int fdt_print(const char *pathp, char *prop, int depth);
 
 /*
  * Flattened Device Tree command, see the help for parameter definitions.
@@ -165,12 +162,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		pathp = argv[2];
 		nodep = argv[3];
 
-		nodeoffset = fdt_find_node_by_path (fdt, pathp);
+		nodeoffset = fdt_path_offset (fdt, pathp);
 		if (nodeoffset < 0) {
 			/*
 			 * Not found or something else bad happened.
 			 */
-			printf ("libfdt fdt_find_node_by_path() returned %s\n",
+			printf ("libfdt fdt_path_offset() returned %s\n",
 				fdt_strerror(nodeoffset));
 			return 1;
 		}
@@ -205,12 +202,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		prop   = argv[3];
 		newval = argv[4];
 
-		nodeoffset = fdt_find_node_by_path (fdt, pathp);
+		nodeoffset = fdt_path_offset (fdt, pathp);
 		if (nodeoffset < 0) {
 			/*
 			 * Not found or something else bad happened.
 			 */
-			printf ("libfdt fdt_find_node_by_path() returned %s\n",
+			printf ("libfdt fdt_path_offset() returned %s\n",
 				fdt_strerror(nodeoffset));
 			return 1;
 		}
@@ -232,6 +229,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		char *pathp;		/* path */
 		char *prop;		/* property */
 		int  ret;		/* return value */
+		static char root[2] = "/";
 
 		/*
 		 * list is an alias for print, but limited to 1 level
@@ -244,6 +242,9 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		 * Get the starting path.  The root node is an oddball,
 		 * the offset is zero and has no name.
 		 */
+		if (argc == 2)
+			pathp = root;
+		else
 			pathp = argv[2];
 		if (argc > 3)
 			prop = argv[3];
@@ -265,12 +266,12 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		 * Get the path.  The root node is an oddball, the offset
 		 * is zero and has no name.
 		 */
-		nodeoffset = fdt_find_node_by_path (fdt, argv[2]);
+		nodeoffset = fdt_path_offset (fdt, argv[2]);
 		if (nodeoffset < 0) {
 			/*
 			 * Not found or something else bad happened.
 			 */
-			printf ("libfdt fdt_find_node_by_path() returned %s\n",
+			printf ("libfdt fdt_path_offset() returned %s\n",
 				fdt_strerror(nodeoffset));
 			return 1;
 		}
@@ -521,21 +522,21 @@ static void print_data(const void *data, int len)
 
 	switch (len) {
 	case 1:	 /* byte */
-		printf("<%02x>", (*(u8 *) data) & 0xff);
+		printf("<0x%02x>", (*(u8 *) data) & 0xff);
 		break;
 	case 2:	 /* half-word */
-		printf("<%04x>", be16_to_cpu(*(u16 *) data) & 0xffff);
+		printf("<0x%04x>", be16_to_cpu(*(u16 *) data) & 0xffff);
 		break;
 	case 4:	 /* word */
-		printf("<%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
+		printf("<0x%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
 		break;
 	case 8:	 /* double-word */
 #if __WORDSIZE == 64
-		printf("<%016llx>", be64_to_cpu(*(uint64_t *) data));
+		printf("<0x%016llx>", be64_to_cpu(*(uint64_t *) data));
 #else
-		printf("<%08x ", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
+		printf("<0x%08x ", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
 		data += 4;
-		printf("%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
+		printf("0x%08x>", be32_to_cpu(*(u32 *) data) & 0xffffffffU);
 #endif
 		break;
 	default:		/* anything else... hexdump */
@@ -554,25 +555,25 @@ static void print_data(const void *data, int len)
  * Recursively print (a portion of) the fdt.  The depth parameter
  * determines how deeply nested the fdt is printed.
  */
-static int fdt_print(char *pathp, char *prop, int depth)
+static int fdt_print(const char *pathp, char *prop, int depth)
 {
-	static int offstack[MAX_LEVEL];
 	static char tabs[MAX_LEVEL+1] =
 		"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t"
 		"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t";
-	void *nodep;		/* property node pointer */
+	const void *nodep;	/* property node pointer */
 	int  nodeoffset;	/* node offset from libfdt */
 	int  nextoffset;	/* next node offset from libfdt */
 	uint32_t tag;		/* tag */
 	int  len;		/* length of the property */
 	int  level = 0;		/* keep track of nesting level */
+	const struct fdt_property *fdt_prop;
 
-	nodeoffset = fdt_find_node_by_path (fdt, pathp);
+	nodeoffset = fdt_path_offset (fdt, pathp);
 	if (nodeoffset < 0) {
 		/*
 		 * Not found or something else bad happened.
 		 */
-		printf ("libfdt fdt_find_node_by_path() returned %s\n",
+		printf ("libfdt fdt_path_offset() returned %s\n",
 			fdt_strerror(nodeoffset));
 		return 1;
 	}
@@ -602,20 +603,22 @@ static int fdt_print(char *pathp, char *prop, int depth)
 	 * The user passed in a node path and no property,
 	 * print the node and all subnodes.
 	 */
-	offstack[0] = nodeoffset;
-
 	while(level >= 0) {
-		tag = fdt_next_tag(fdt, nodeoffset, &nextoffset, &pathp);
+		tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
 		switch(tag) {
 		case FDT_BEGIN_NODE:
-			if(level <= depth)
+			pathp = fdt_get_name(fdt, nodeoffset, NULL);
+			if (level <= depth) {
+				if (pathp == NULL)
+					pathp = "/* NULL pointer error */";
+				if (*pathp == '\0')
+					pathp = "/";	/* root is nameless */
 				printf("%s%s {\n",
 					&tabs[MAX_LEVEL - level], pathp);
+			}
 			level++;
-			offstack[level] = nodeoffset;
 			if (level >= MAX_LEVEL) {
-				printf("Aaaiii <splat> nested too deep. "
-					"Aborting.\n");
+				printf("Nested too deep, aborting.\n");
 				return 1;
 			}
 			break;
@@ -628,7 +631,12 @@ static int fdt_print(char *pathp, char *prop, int depth)
 			}
 			break;
 		case FDT_PROP:
-			nodep = fdt_getprop (fdt, offstack[level], pathp, &len);
+			fdt_prop = fdt_offset_ptr(fdt, nodeoffset,
+					sizeof(*fdt_prop));
+			pathp    = fdt_string(fdt,
+					fdt32_to_cpu(fdt_prop->nameoff));
+			len      = fdt32_to_cpu(fdt_prop->len);
+			nodep    = fdt_prop->data;
 			if (len < 0) {
 				printf ("libfdt fdt_getprop(): %s\n",
 					fdt_strerror(len));
@@ -650,6 +658,7 @@ static int fdt_print(char *pathp, char *prop, int depth)
 			}
 			break;
 		case FDT_NOP:
+			printf("/* NOP */\n", &tabs[MAX_LEVEL - level]);
 			break;
 		case FDT_END:
 			return 1;
@@ -692,5 +701,3 @@ U_BOOT_CMD(
 	"          fdt print /cpus \"#address-cells\"\n"
 	"          fdt set   /cpus \"#address-cells\" \"[00 00 00 01]\"\n"
 );
-
-#endif /* CONFIG_OF_LIBFDT */

common/cmd_flash.c

@@ -31,8 +31,6 @@
 #include <dataflash.h>
 #endif
 
-#if defined(CONFIG_CMD_FLASH)
-
 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 #include <jffs2/jffs2.h>
 
@@ -731,5 +729,3 @@ U_BOOT_CMD(
 #undef	TMP_ERASE
 #undef	TMP_PROT_ON
 #undef	TMP_PROT_OFF
-
-#endif

common/cmd_fpga.c

@@ -43,8 +43,6 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#if defined (CONFIG_FPGA) && defined(CONFIG_CMD_FPGA)
-
 /* Local functions */
 static void fpga_usage (cmd_tbl_t * cmdtp);
 static int fpga_get_op (char *opstr);
@@ -321,4 +319,3 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
 	    "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
 	    "\tloadmk\tLoad device generated with mkimage\n"
 	    "\tdump\tLoad device to memory buffer\n");
-#endif

common/cmd_i2c.c

@@ -86,9 +86,6 @@
 #include <i2c.h>
 #include <asm/byteorder.h>
 
-#if defined(CONFIG_CMD_I2C)
-
-
 /* Display values from last command.
  * Memory modify remembered values are different from display memory.
  */
@@ -1024,5 +1021,3 @@ U_BOOT_CMD(
 	"      (valid chip values 50..57)\n"
 );
 #endif
-
-#endif

common/cmd_ide.c

@@ -54,10 +54,6 @@
 
 #ifndef __PPC__
 #include <asm/io.h>
-#ifdef __MIPS__
-/* Macros depend on this variable */
-unsigned long mips_io_port_base = 0;
-#endif
 #endif
 
 #ifdef CONFIG_IDE_8xx_DIRECT
@@ -72,8 +68,6 @@ DECLARE_GLOBAL_DATA_PTR;
 # define SYNC		/* nothing */
 #endif
 
-#if defined(CONFIG_CMD_IDE)
-
 #ifdef CONFIG_IDE_8xx_DIRECT
 /* Timings for IDE Interface
  *
@@ -1136,9 +1130,9 @@ static void ide_ident (block_dev_desc_t *dev_desc)
 
 	input_swap_data (device, iobuf, ATA_SECTORWORDS);
 
-	ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
-	ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
-	ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
+	ident_cpy ((unsigned char*)dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
+	ident_cpy ((unsigned char*)dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
+	ident_cpy ((unsigned char*)dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
 #ifdef __LITTLE_ENDIAN
 	/*
 	 * firmware revision and model number have Big Endian Byte
@@ -1953,9 +1947,9 @@ static void	atapi_inquiry(block_dev_desc_t * dev_desc)
 		return;
 
 	/* copy device ident strings */
-	ident_cpy(dev_desc->vendor,&iobuf[8],8);
-	ident_cpy(dev_desc->product,&iobuf[16],16);
-	ident_cpy(dev_desc->revision,&iobuf[32],5);
+	ident_cpy((unsigned char*)dev_desc->vendor,&iobuf[8],8);
+	ident_cpy((unsigned char*)dev_desc->product,&iobuf[16],16);
+	ident_cpy((unsigned char*)dev_desc->revision,&iobuf[32],5);
 
 	dev_desc->lun=0;
 	dev_desc->lba=0;
@@ -2085,5 +2079,3 @@ U_BOOT_CMD(
 	"diskboot- boot from IDE device\n",
 	"loadAddr dev:part\n"
 );
-
-#endif

common/cmd_immap.c

@@ -28,8 +28,7 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_IMMAP) && \
-    (defined(CONFIG_8xx) || defined(CONFIG_8260))
+#if defined(CONFIG_8xx) || defined(CONFIG_8260)
 
 #if defined(CONFIG_8xx)
 #include <asm/8xx_immap.h>
@@ -41,9 +40,7 @@
 #include <asm/iopin_8260.h>
 #endif
 
-#if defined(CONFIG_8xx) || defined(CONFIG_8260)
 DECLARE_GLOBAL_DATA_PTR;
-#endif
 
 static void
 unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

common/cmd_itest.c

@@ -32,8 +32,6 @@
 #include <config.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_ITEST)
-
 #define EQ	0
 #define NE	1
 #define LT	2
@@ -197,4 +195,3 @@ U_BOOT_CMD(
 	"itest\t- return true/false on integer compare\n",
 	"[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
 );
-#endif

common/cmd_jffs2.c

@@ -93,9 +93,6 @@
 #include <jffs2/jffs2.h>
 #include <linux/list.h>
 #include <linux/ctype.h>
-
-#if defined(CONFIG_CMD_JFFS2)
-
 #include <cramfs/cramfs_fs.h>
 
 #if defined(CONFIG_CMD_NAND)
@@ -2191,5 +2188,3 @@ U_BOOT_CMD(
 #endif /* #ifdef CONFIG_JFFS2_CMDLINE */
 
 /***************************************************/
-
-#endif

common/cmd_log.c

@@ -48,8 +48,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_LOGBUFFER)
-
 /* Local prototypes */
 static void logbuff_putc (const char c);
 static void logbuff_puts (const char *s);
@@ -287,5 +285,3 @@ static int logbuff_printk(const char *line)
 	}
 	return i;
 }
-
-#endif /* (CONFIG_LOGBUFFER) */

common/cmd_mfsl.c

@@ -29,8 +29,6 @@
 #include <common.h>
 #include <config.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MFSL)
 #include <asm/asm.h>
 
 int do_frd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
@@ -413,5 +411,3 @@ U_BOOT_CMD (rspr, 3, 1, do_rspr,
 		" 1 - MSR - Machine status register\n"
 		" 3 - EAR - Exception address register\n"
 		" 5 - ESR - Exception status register\n");
-
-#endif

common/cmd_mii.c

@@ -27,8 +27,6 @@
 
 #include <common.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MII)
 #include <miiphy.h>
 
 #ifdef CONFIG_TERSE_MII
@@ -112,9 +110,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}
@@ -496,9 +496,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 					"OUI = 0x%04X, "
 					"Model = 0x%02X, "
 					"Rev = 0x%02X, "
-					"%3dbaseT, %s\n",
+					"%3dbase%s, %s\n",
 					j, oui, model, rev,
 					miiphy_speed (devname, j),
+					miiphy_is_1000base_x (devname, j)
+						? "X" : "T",
 					(miiphy_duplex (devname, j) == FULL)
 						? "FDX" : "HDX");
 			}
@@ -594,5 +596,3 @@ U_BOOT_CMD(
 );
 
 #endif /* CONFIG_TERSE_MII */
-
-#endif

common/cmd_misc.c

@@ -27,8 +27,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_MISC)
-
 int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	ulong start = get_timer(0);
@@ -68,5 +66,3 @@ U_BOOT_CMD(
 	"N\n"
 	"    - delay execution for N seconds (N is _decimal_ !!!)\n"
 );
-
-#endif

common/cmd_mmc.c

@@ -23,9 +23,6 @@
 
 #include <common.h>
 #include <command.h>
-
-#if defined(CONFIG_CMD_MMC)
-
 #include <mmc.h>
 
 int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -42,5 +39,3 @@ U_BOOT_CMD(
 	"mmcinit - init mmc card\n",
 	NULL
 );
-
-#endif

common/cmd_net.c

@@ -28,8 +28,6 @@
 #include <command.h>
 #include <net.h>
 
-#if defined(CONFIG_CMD_NET)
-
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 
 static int netboot_common (proto_t, cmd_tbl_t *, int , char *[]);
@@ -343,5 +341,3 @@ U_BOOT_CMD(
 	"[NTP server IP]\n"
 );
 #endif
-
-#endif

common/cmd_pci.c

@@ -30,16 +30,11 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_PCI
-
 #include <command.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <pci.h>
 
-#if defined(CONFIG_CMD_PCI)
-
 extern int cmd_get_data_size(char* arg, int default_size);
 
 unsigned char	ShortPCIListing = 1;
@@ -564,7 +559,3 @@ U_BOOT_CMD(
 	"pci write[.b, .w, .l] b.d.f address value\n"
 	"    - write to CFG address\n"
 );
-
-#endif
-
-#endif /* CONFIG_PCI */

common/cmd_portio.c

@@ -30,8 +30,6 @@
 #include <common.h>
 #include <command.h>
 
-#if defined(CONFIG_CMD_PORTIO)
-
 extern int cmd_get_data_size (char *arg, int default_size);
 
 /* Display values from last command.
@@ -165,5 +163,3 @@ U_BOOT_CMD(
 	"[.b, .w, .l] port\n"
 	"    - read datum from IO port\n"
 );
-
-#endif