Wolfgang Denk
c97a2aaf27
OMAP242x fix for GP device booting
...
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
2005-09-25 00:59:24 +02:00
Wolfgang Denk
265817c7e6
Add support for AMD's Pb1x00 eval board;
...
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
2005-09-25 00:53:22 +02:00
Wolfgang Denk
b63de2c053
Update omap5912osk board:
...
Use drivers/cfi_flash.c instead of private flash driver;
Remove hardcoded personalized settings from omap5912osk.h;
Fix spacing with (RO) marks in 'flinfo' output.
Patch by Michael Bendzick, 14 Jan 2005
2005-09-25 00:23:05 +02:00
Wolfgang Denk
3706ba1a36
Fix warnings for PCI code on ixp
...
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
2005-09-25 00:00:45 +02:00
Wolfgang Denk
9a9200b4a7
virtex2 fix for bogus download error messages
...
The virtex2 FPGA download code watches for init going active during
a download of config data as an error condition. init also goes
active after a configuration is finished in concert with the done
signal. So far, the code does not check for done active until all
of the configuration data is sent. If configuration data has a few
extra pad bytes at the end, this would cause an error message even
though the download had suceeded.
NOTE: virtex2 slave serial and spartan2 versions may still have the
same problem.
Patch by Andrew Dyer, 12 Jan 2005
2005-09-24 23:41:00 +02:00
Wolfgang Denk
dafbe3790e
Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
...
Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
message when probing for nonexistent flash in little endian mode.
As a side effect more efficient and smaller code is generated,
which is always a Good Thing (TM).
Patch by Ladislav Michl, 24 Sep 2005
2005-09-24 23:32:48 +02:00
Wolfgang Denk
28cb937584
Update for TFTP using a fixed UDP port
...
Use the approved environment variable names. Added "tftpdstp" to
allow ports other than 69 per Tolunay Orkun's recommendation.
Patch by Jerry Van Baren, 12 Jan 2005
2005-09-24 23:25:46 +02:00
Wolfgang Denk
ecb0ccd9c2
Allow to force TFTP to use a fixed UDP port
...
(Add a configuration option CONFIG_TFTP_PORT and optional env variable tftpport)
Patch by Jerry Van Baren, 10 Jan 2005
2005-09-24 22:37:32 +02:00
Wolfgang Denk
4bc12f1ccf
Fix ethernet timeouts on dbau1550 and other au1x00 systems
...
Patch by Leif Lindholm, 29 Dec 2004
2005-09-24 22:05:40 +02:00
Wolfgang Denk
2b792afcc5
* Fix PHY address argument passing with mii info command
...
Patch by Andrew Dyer, 28 Dec 2004
* Cleanup: fix broken builds
2005-09-24 21:54:50 +02:00
Wolfgang Denk
0c8721a466
Cleanup (PPC4xx is AMCC now)
2005-09-23 11:05:55 +02:00
Wolfgang Denk
a6e6cf0036
Merge with /home/wd/git/u-boot/work
2005-09-22 09:46:19 +02:00
Wolfgang Denk
1caa70788c
Cleanup - update CHANGELOG, undo test settings
2005-09-22 09:34:17 +02:00
Stefan Roese
7644f16f6b
esd CPCI2DP board added
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:16:57 +02:00
Stefan Roese
026cb5d864
esd PMC405 board updated
...
Patch by Matthias Fuchs, 22 Sep 2005
2005-09-22 09:07:15 +02:00
Stefan Roese
98f4a3dfcb
Add SM501 support to HH405 board.
...
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
2005-09-22 09:04:17 +02:00
Wolfgang Denk
8b4c9e7c14
Fix bug in auto_update (trab board)
...
Patch by Martin Krause, 16 Sep 2005
2005-09-21 15:31:25 +02:00
Wolfgang Denk
59d80bf180
Fix computation of framebuffer palette for 8bpp LCD bitmaps
...
Patch by Francesco Mandracci, 16 Sep 2005
2005-09-21 15:24:52 +02:00
Wolfgang Denk
1806c75959
Update configuration for INKA4x0 board
2005-09-21 10:07:56 +02:00
Wolfgang Denk
29fe1c0fa4
Update configuration for PM854 board
...
Based on patch by R. Loeffl, 20 Jul 2005
2005-09-21 09:59:55 +02:00
Stefan Roese
053b40fa0c
Add PCI support to TQM8540 and TQM8560 boards
...
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 14:41:11 +02:00
Stefan Roese
34c0a5e98b
Update AMCC Yosemite to get a consistent setup for all AMCC eval
...
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
2005-09-15 11:34:07 +02:00
Wolfgang Denk
3edb0ccf61
Merge with /home/wd/git/u-boot/master
2005-09-14 17:06:43 +02:00
Wolfgang Denk
47278471f9
Merge with /home/sr/git/u-boot
2005-09-14 16:59:18 +02:00
Wolfgang Denk
e1b7296126
Add support for mtddevnum and mtddevname variables (mtdparts command)
...
[Merge with /home/m8/git/u-boot]
2005-09-13 00:20:45 +02:00
Wolfgang Denk
670d9f132d
Change default console baud rate for stxxtc board
2005-09-13 00:12:33 +02:00
Marian Balakowicz
7d45477bfa
Added support for mtddevnum and mtddevname variables (mtdparts command)
2005-09-11 15:27:12 +02:00
Stefan Roese
4a3cd9e655
Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
...
ethernet port on ebony.
Patch by Stefan Roese, 7 Sep 2005
2005-09-07 16:21:12 +02:00
Wolfgang Denk
5d244ea128
Merge with /home/sr/git/u-boot:
...
Add I2C support for TQM85xx
2005-09-06 22:17:16 +02:00
Wolfgang Denk
80e238c7f0
Fix default command set (don't include CFG_CMD_DISPLAY command)
...
Patch by Pantelis Antoniou, 02 Sep 2005
2005-09-03 02:22:41 +02:00
Wolfgang Denk
6d51e505ad
Cleanup compiler warnings.
2005-09-03 01:58:35 +02:00
Wolfgang Denk
7b3e3c5954
Update CHANGELOG.
2005-09-03 01:23:25 +02:00
Stefan Roese
9d2a873bdf
Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
...
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
2005-08-31 12:55:50 +02:00
Wolfgang Denk
77f6580cc0
Update CHANGELOG file
2005-08-31 12:30:09 +02:00
Wolfgang Denk
61dada83f3
Minor reformatting
2005-08-24 12:41:18 +02:00
Stefan Roese
a3e4fcb860
Fixed bamboo port to enable running without DDR-DIMM (bamboo has also 64MB onboard DDR)
...
Patch by Stefan Roese, 24 Aug 2005
2005-08-24 11:21:36 +02:00
Wolfgang Denk
a9fe9f427d
Update CHANGELOG
2005-08-23 23:04:40 +02:00
Wolfgang Denk
2ac4785c2f
Fix make dependencies for at91rm9200 and ks8695 cpus
...
Patch by Steven Scholz, 23 Aug 2005
2005-08-23 22:29:44 +02:00
Wolfgang Denk
d534f5cc38
Add JFFS2 support for TQM5200 board
2005-08-23 22:27:41 +02:00
Stefan Roese
5e4b3361bc
Add esd cpci5200 and pf5200 boards
...
Patch by Reinhard Arlt, 22 Aug 2005
2005-08-22 17:51:53 +02:00
Wolfgang Denk
94085698d0
Fix sysclock for TQM8540 and TQM8560 boards
...
Patch by Martin Krause, 25 Jul 2005
2005-08-19 00:55:12 +02:00
Wolfgang Denk
c7db9a3805
Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
...
Patch by Martin Krause, 08 Jun 2005
2005-08-19 00:53:02 +02:00
Wolfgang Denk
6617aae9b9
Add new board specific commands for TQM5200/STK52XX
...
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
2005-08-19 00:46:54 +02:00
Wolfgang Denk
df3c7c8f52
Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
...
because of a bug in the AT91RM9200 CPU PLL
Patch by Martin Krause, 22 Apr 2005
2005-08-19 00:36:45 +02:00
Wolfgang Denk
601aed1e8f
Add automatic HW detection for another CMC_PU2 variant
...
Patch by Martin Krause, 20 Apr 2005
2005-08-19 00:08:55 +02:00
Wolfgang Denk
dbc5819098
Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
...
Patch by Martin Krause, 19 Apr 2005
2005-08-18 12:21:16 +02:00
Wolfgang Denk
e8aa824eb2
Fix initialization problem on TQM5200 without SM501
...
Patch by Martin Krause, 8 Apr. 2005
2005-08-18 11:55:22 +02:00
Wolfgang Denk
4f562f145a
Add RTC support for STK52XX.200
...
Patch by Martin Krause, 7 Apr. 2005
2005-08-18 11:51:12 +02:00
Wolfgang Denk
df04a3df33
Add CHANEGLOG entry; sort Makefile entries
2005-08-18 01:22:22 +02:00
Wolfgang Denk
98128f389c
Enable PCI on hmi1001 board
2005-08-16 15:17:53 +02:00