UEFI code is always little-endian. Remove a superfluous test.
Remove a superfluous type conversion.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This commit adds the missing EFI_TCG2_PROTOCOL selftest
and Measured Boot selftest in lib/efi_selftest.
This selftest includes PE/COFF image measurement test, some PCR values are
different in each architecture. With that, this commit also adds pre-built
versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF
image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and
riscv64. Prebuilding avoids the problem of reproducible builds.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Make the test 'onrequest'.
Add code comments to the includes with the binaries.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Repeatedly receive the packets until the receive buffer is empty.
If the buffer is empty, EFI_SIMPLE_NETWORK_PROTOCOL::Receive()
returns EFI_NOT_READY. We don't need to use the wait_for_event()
every time.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Do not check EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT in packet
receiving loop. This depends on the implementation and not
related to whether the packet can be received or not.
Whether the received packets are available or not is ensured
by wait_for_packet, and that is already done in the loop.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
According to the UEF specification v2.9, the main purpose of the
EFI_SIMPLE_NETWORK_PROTOCOL::GetStatus() is for checking the link
status via EFI_SIMPLE_NETWORK_MODE::MediaPresent.
So this uses net->get_status() for checking the link status before
running network test.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
According to chapter 7.1 "Event, Timer, and Task Priority Services"
TPL_HIGH_LEVEL should not be exposed to applications and drivers.
According to the discussion with EDK II contributors this implies that
CreateEvent() shall not allow to create events with TPL_HIGH_LEVEL.
Cc: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Add $(CFLAGS_EFI) and remove $(CFLAGS_NON_EFI) for
efi_selftest_miniapp_exception.o.
The removal is needed when compiling with LTO - this object file needs
to be compiled without -flto.
The adding is for consistency with other miniapps.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Setup will always occur before ExitBootServices(). So eliminate
EFI_SETUP_AFTER_BOOTTIME_EXIT. Put the SetVirtualAddressMap() test into a
separate class so that we can execute it last.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This commmit exercises the ESRT creation in a EFI selftest.
A fake FMP, with TEST_ESRT_NUM_ENTRIES FW images, is installed in the
system leading to the corresponding ESRT entries being populated.
The ESRT entries are checked against the datastructure used to
initialize the FMP.
Invocation from the sandbox platform:
add to sandbox_defconfig:
+CONFIG_CMD_BOOTEFI_SELFTEST=y
make sandbox_capsule_defconfig all
./u-boot -d arch/sandbox/dts/test.dtb
bootefi selftest
CC: Heinrich Schuchardt <xypron.glpk@gmx.de>
CC: Sughosh Ganu <sughosh.ganu@linaro.org>
CC: AKASHI Takahiro <takahiro.akashi@linaro.org>
CC: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CC: Andre Przywara <andre.przywara@arm.com>
CC: Alexander Graf <agraf@csgraf.de>
CC: nd@arm.com
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
We are redefining how u-boot locates the initrd to load via the kernel
LoadFile2 protocol. This selftest is not relevant any more, so remove
it. A new one will be added later
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Test EFI_DEVICE_PATH_TO_TEXT_PROTOCOL.ConvertDevicePathToText() for a multi
part device path.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
If dtbdump.efi is loaded from memory when calling LoadImage the loaded
image protocol will not indicate the partition from where it was loaded.
In this case use the EFI system partition for the 'load' and 'save'
commands.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The field Media->LastBlock of the EFI_BLOCK_IO_PROTOCOL must be filled
with the index of the last logical block (LBA) for the block device that
our test driver provides.
After calling ConnectController() U-Boot exposes the block IO protocol for
the partition check that the value of Media->LastBlock equals the partition
size minus one.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
EFI applications must use CR LF as line endings.
Provide a print() function to reduce code size.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide an UEFI application to save the initial RAM disk provided by U-Boot
via the Load File2 protocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The dtbdump.efi binary can already be used to dump the configuration table
with the device-tree to a file.
With this patch a device-tree file can be loaded. The EFI_DT_FIXUP_PROTOCOL
is called to
* apply U-Boot's fix-ups
* let U-Boot make memory reservations as required by the device-tree
* install the new device-tree as configuration table
In a next step this configuration table can be dumped.
A dtbdump.efi session would look like:
DTB Dump
========
=> load test.dtb
device-tree installed
=> save fixed-up.dtb
fixed-up.dtb written
=> exit
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide a unit test that causes an illegal instruction to occur.
The test can be run with the following commands:
=> setenv efi_selftest exception
=> bootefi selftest
This might be the output:
Executing 'exception'
EFI application triggers exception.
Illegal instruction
pc = 0x1444d016, pc_reloc = 0xffffaa078e8dd016
UEFI image [0x0000000000000000:0xffffffffffffffff] '/\selftest'
UEFI image [0x000000001444b000:0x0000000014451fff] pc=0x2016 '/bug.efi'
Resetting ...
It would tell us that the exception was triggered by an instruction
0x2016 bytes after the load address of the binary with filename /bug.efi.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
A unit test is supplied to test the support for the EFI_LOAD_FILE_PROTOCOL
and the EFI_LOAD_FILE2_PROTOCOL by the LoadImage() boot service.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The EFI_LOAD_FILE_PROTOCOL_GUID and EFI_LOAD_FILE2_PROTOCOL_GUID are needed
to complement the implementation of the LoadFile() boot service.
Remove a duplicate declaration of a variable for the
EFI_LOAD_FILE2_PROTOCOL_GUID.
Move the remaining declaration to efi_boottime.c.
Add a variable for the EFI_LOAD_FILE_PROTOCOL_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When calling ExitBootServices during out unit tests we should not detach
devices as we need console output for runtime tests.
Fixes: 529441ca89 ("efi_loader: Disable devices before handing over control")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
For validating the fixed up device tree we need a tool to need to save it
to a file.
dtbdump.efi copies the configuration table with the device tree to a file
on the same partition from which dtbdump.efi was invoked. The file name can
be entered on the console.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
When we do not execute a test requiring ExitBootServices do not reset the
system after testing.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Print the CRC32 loaded via the EFI_LOAD_FILE2_PROTOCOL as a hexadecimal
number.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
On RISC-V check that the /chosen node has a boot-hartid property.
To run the test configure with CONFIG_CMD_BOOTEFI_SELFTEST=y and issue
setenv efi_selftest device tree
setenv serial# myserial
bootefi selftest
If the test succeeds, it reports the boot-hartid, e.g.
boot-hartid: 1
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Allow specifying the node on which a property is searched.
Test the device tree consistency more rigorously.
Some efi_st_printf() calls have been converted to efi_st_error().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Before calling do_reset() in the EFI selftest we must restore the global
data pointer.
Fixes: fa63753f86 ("efi_selftest: substitute ResetSystem() by do_reset()")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
The unit test will reset the system by calling the ResetSystem() runtime
service before or after ExitBootServices() according to the users choice
by setting environment variable efi_selftest to:
* 'reset system' or
* 'reset system runtime'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Do not execute the block device test if CONFIG_DOS_PARTITION=n.
Imply CONFIG_DOS_PARTITION in Kconfig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
As variable services are available at runtime we have to expect EFI_SUCCESS
when calling the services.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Move this header out of the common header. Network support is used in
quite a few places but it still does not warrant blanket inclusion.
Note that this net.h header itself has quite a lot in it. It could be
split into the driver-mode support, functions, structures, checksumming,
etc.
Signed-off-by: Simon Glass <sjg@chromium.org>
According to the UEFI spec ACPI tables should be placed in
EfiACPIReclaimMemory. Let's do the same with the device tree.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Grant Likely <grant.likely@arm.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
GetNextVariableName should report the length of the variable including the
final 0x0000 in bytes.
Check this in the unit test.
Increase the buffer size for variable names. 40 bytes is too short.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Provide a unit test loading an initial ramdisk using the
EFI_LOAD_FILE2_PROTOCOL. The test is only executed on request.
An example usage - given a file image with a file system in partition 1
holding file initrd - is:
* Configure the sandbox with
CONFIG_EFI_SELFTEST=y
CONFIG_EFI_LOAD_FILE2_INITRD=y
CONFIG_EFI_INITRD_FILESPEC="host 0:1 initrd"
* Run ./u-boot and execute
host bind 0 image
setenv efi_selftest load initrd
bootefi selftest
This would provide a test output like:
Testing EFI API implementation
Selected test: 'load initrd'
Setting up 'load initrd'
Setting up 'load initrd' succeeded
Executing 'load initrd'
Loaded 12378613 bytes
CRC32 2997478465
Executing 'load initrd' succeeded
Now the size and CRC32 can be compared to the provided file.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Use the correct protocol in efi_uc_stop() when detaching the driver from
the controller.
Change the block IO unit test for the block device driver to throw an error
instead of a todo if teardown fails.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
For automating testing we should be able to power off the test system.
The implementation of EFI_RESET_SHUTDOWN requires the do_poweroff()
function which is only available if CONFIG_CMD_POWEROFF=y.
Enable CONFIG_CMD_POWEROFF if PSCI reset is available.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
