Commit Graph
13744 Commits
Author SHA1 Message Date
Patrick Delaunay 4f5128ff89 configs: cei-tk1-som: remove CONFIG_ARMV7_PSCI in include file
Activate ARCH_SUPPORT_PSCI as other TEGRA124 target and remove
CONFIG_ARMV7_PSCI and CONFIG_ARMV7_PSCI_NR_CPUS in configs file as they
are migrated in Kconfig.

Select CONFIG_ARMV7_PSCI_0_1 (the first PSCI version),
because CONFIG_ARMV7_PSCI_0_2 and CONFIG_ARMV7_PSCI_1_0
are not activated in this product.

Hi,

This patch depend on the previous serie [1].

I don't test this patch on real hardware but
after this patch the size of the binary don't change.

In .config we have:
  CONFIG_ARCH_SUPPORT_PSCI=y
  CONFIG_ARMV7_PSCI=y
  # CONFIG_ARMV7_PSCI_1_0 is not set
  # CONFIG_ARMV7_PSCI_0_2 is not set
  CONFIG_ARMV7_PSCI_0_1=y
  CONFIG_ARMV7_PSCI_NR_CPUS=4

In u-boot.cfg, this patch only add the 2 lines
  #define CONFIG_ARCH_SUPPORT_PSCI 1
  #define CONFIG_ARMV7_PSCI_0_1 1

[1] "Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig"
http://patchwork.ozlabs.org/project/uboot/list/?series=184029

Regards
Patrick

END

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:39:15 -07:00
Peter Robinson fe669925cb arm: tegra: add options for BOOTENV_EFI_SET_FDTFILE_FALLBACK for tegra186
Upstream linux DT naming doesn't align with the U-Boot DT, which may
not always be the case so this allows using BOOTENV_EFI_SET_FDTFILE_FALLBACK
where it might be appropriate for some boards.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:30:42 -07:00
Peter Robinson 632fb978a5 arm: tegra: define fdtfile option for distro boot
For booting via UEFI we need to define the fdtfile option so
bootefi has the option to load a fdtfile from disk. For arm64
the kernel dtb is located in a vendor directory so we define
that as nvidia for that architecture.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:30:16 -07:00
Marcel Ziswiler 8e487f38cc apalis/colibri_t30: add note about colibri vs. nvidia uart mapping
The following mapping is applicable for Apalis T30:

Apalis UART1: NVIDIA UARTA
Apalis UART2: NVIDIA UARTD
Apalis UART3: NVIDIA UARTB
Apalis UART4: NVIDIA UARTC

The following mapping is applicable for Colibri T30:

Colibri UART-A: NVIDIA UARTA
Colibri UART-B: NVIDIA UARTD
Colibri UART-C: NVIDIA UARTB

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04 13:21:15 -07:00
Holger Brunck a6cd384b9c km/common: remove CONFIG_MTD_CONCAT
This was used for a board which is not supproted anymore and can
therefore be dropped.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02 16:21:58 -05:00
Holger Brunck 4cb8a10f7e remove obsolete option CONFIG_JFFS2_CMDLINE
This option is obsolete since 2009 and can be removed globally.

CC: Stefan Roese <sr@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02 16:21:58 -05:00
Michal Simek 631a241e48 microblaze: Detect NOR flash based on DT
Remove fixed configuration and detect flash based on DT.

Also increase amount of flash sectors to 2048 because on kc705 flash has
1027 sectors.

Bank # 1: CFI conformant flash (16 x 16)  Size: 128 MB in 1027 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962
  Erase timeout: 4096 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 1024 bytes

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:54 +01:00
Michal Simek 09996b4d84 microblaze: Unify of setting for SPL_NOR/XIP support
XIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with
using SYS_FLASH_BASE are wrong because it is not aligned with DM.
That's why change these macro and align them with TEXT_BASE macro.
Information should be find at run time based on DT but implementation is
not done yet.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek a3c43fb01a microblaze: Remove CONFIG_SYS_FDT_SIZE
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek 6c5828dc4b microblaze: Get rid of xparameters.h
There is no need to use this file anymore. Include it in main config file
and simplify logic based on it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek 7556fa09e0 microblaze: Simplify cache handling
Enable caches by default. For now just simplify config file but it should
be read from DT or PVRs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Michal Simek 91218f4c24 microblaze: Clean config file from ifdef mess
A lot of configs has been moved to Kconfig and it ends up in ifdef mess
with no bodies. That's why remove all of them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20 10:42:53 +01:00
Holger Brunck c904a0b762 km/ppc: use Kconfig for MEMTEST configuration
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and
introduced due to the global Kconfig migration of this option in u-boot.

CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19 09:45:49 -05:00
Matteo Ghidoni aef04a8aa1 km: replace hardcoded address for imported environment
Instead of using an hard coded address, make use of an
already defined address for importing the environment
for ramfs and nfs boot. This allows boards having different
mapping to use the same code.

CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19 09:45:49 -05:00
Pali Rohár e4f7592196 Nokia RX-51: Remove old comments from configs/nokia_rx51.h file
These comments are relict for old, now removed config options.
So remove these obsoleted comments too.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:29:40 +05:30
Pali Rohár 8d8c181703 Nokia RX-51: Convert to CONFIG_DM_I2C
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove
CONFIG_SYS_I2C.

Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15 15:26:25 +05:30
Tom Rini 896cc5aa4a Merge tag 'u-boot-amlogic-20201105' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic
- meson64_android: don't show logo on ROM USB boot
- doc: update support matrix and fix vim3/l build instructions
- meson64: relocate config_distro_bootcmmd header
2020-11-06 09:46:43 -05:00
Tom Rini d062c1344c Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86
- Add a new SMBIOS parser and enable it when booting from coreboot
- Fix up various driver names to avoid dtoc warnings
- Fully enable ACPI support on Google Chromebook Coral
- Add a way to set SMBIOS properties using the devicetree
- Update existing boards to use devicetree for SMBIOS using a new
  default sysinfo driver
2020-11-06 09:46:43 -05:00
Simon Glass e0028ab75a x86: Boot coral into Chrome OS by default
Add a script to boot Chrome OS from the internal MMC. This involved adding
a few commands and options.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-06 09:51:32 +08:00
Jaehoon Chung 014b9f9676 configs: meson64: relocate config_distro_bootcmmd header
Relocate a config_distro_bootcmd header before defined
CONFIG_EXTRA_ENV_SETTINGS. Otherwise it can't change to specific
environment.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-05 16:27:31 +01:00
Sebastian Reichel 64272efdaf board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
GE B1x5v2 patient monitor series is similar to the CARESCAPE Monitor
series (GE Bx50). It consists of a carrier PCB used in combination
with a Congatec QMX6 SoM. This adds U-Boot support using device model
everywhere and SPL for memory initialization.

Proper configuration is provided as 'ge_b1x5v2_defconfig' and the
combined image u-boot-with-spi.imx can be flashed directly to 1024
byte offset to /dev/mtdblock0. Alternatively SPL and u-boot.imx can
be loaded separately via USB-OTG using e.g. imx_usb.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-11-01 16:01:40 +01:00
Teresa Remmet 0cc2a07879 board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
Add support PHYTEC phyCORE-i.MX8MM SOM.

Supported features:
 - 2GB LPDDR4 RAM
 - 1x 1Gbit Ethernet
 - eMMC
 - external SD
 - debug UART3
 - watchdog
 - i2c eeprom

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
2020-11-01 15:58:19 +01:00
Tom Rini 2c31d7e746 Merge tag 'u-boot-rockchip-20201031' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- New PX30 board: Engicam PX30.Core;
- Fix USB HID support for rock960;
- Remove host endianness dependency for rockchip mkimage;
- dts update for rk3288-tinker;
- Enable console MUX for some ROCKPi boards;
- Add config-based ddr selection for px30;
2020-10-30 23:13:13 -04:00
Jagan Teki 39c8b2c72a rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
PX30.Core is an EDIMM SOM based on Rockchip PX30 from Engicam.

EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board from Engicam.

PX30.Core needs to mount on top of this Evaluation board for
creating complete PX30.Core EDIMM2.2 Starter Kit.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
2020-10-30 23:31:26 +08:00
Guillaume La Roque 82f6508ad7 configs: meson64_android: don't show logo on ROM USB boot
When booting from rom usb, skip the boot logo logic as it's possible
that the partition containing the logo does not exist yet.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2020-10-30 16:20:26 +01:00
Peter Robinson e6dcfff8e6 rockchip: Rock960: fix up USB support
Fix up USB config options so keyboards and other USB devices work.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Change-Id: I34b0696e0ac7303186f20c83278dde340399b690
2020-10-30 18:08:30 +08:00
Tom Rini 47754334b1 Merge tag 'xilinx-for-v2021.01-v2' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2021.01-v2

common:
- Add support for 64bit loadables from SPL

xilinx:
- Update documentation and record ownership
- Enable eeprom board detection based legacy and fru formats
- Add support for FRU format

microblaze:
- Optimize low level ASM code
- Enable SPI/I2C
- Enable distro boot

zynq:
- Add support for Zturn V5

zynqmp:
- Improve silicon detection code
- Enable several kconfig options
- Align DT with the latest state
- Enabling security commands
- Enable and support FPGA loading from SPL
- Optimize xilinx_pm_request() calling

versal:
- Some DTs/Kconfig/defconfig alignments
- Add binding header for clock and power

zynq-sdhci:
- Add support for tap delay programming

zynq-spi/zynq-qspi:
- Use clock framework for getting clocks

xilinx-spi:
- Fix some code issues (unused variables)

serial:
- Check return value from clock functions in pl01x
2020-10-29 11:30:15 -04:00
Tom Rini eca57cafa5 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
- Bug fixes and updates on vid, ls1088a lx2160a and other layerscape
  platforms.
- Add optee_rpmb support for LX2 & Kontron sl28 support
2020-10-29 09:10:24 -04:00
Michal Simek f2b0376010 xilinx: Remove additional newline in config files
Trivial fix.

Fixes: e519f03a18 ("cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:13:33 +01:00
T Karthik Reddy 44d2be8d6a microblaze: Add support for distro boot
Add distro boot support for microblaze and enable jtag, qspi,
dhcp, pxe boot targets for distro boot.
Enable DISTRO_DEFAULTS config in microblaze defconfig and also
enable support for spi xilinx driver & spi vendors to access
spi flash by distro boot.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:01:36 +01:00
T Karthik Reddy 581d6a6da7 microblaze: trivial code fixes
Set proper indentation for env variables in microblaze header file.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-10-27 08:01:36 +01:00
Ovidiu Panait f5d8b1a1f9 microblaze: start.S: Use board_init_f_alloc/init in early init
Implement early init by calling generic board_init_f_alloc_reserve and
board_init_f_init_reserve functions:
* drop SYS_MALLOC_F_LEN related code, as allocation and gd->malloc_base
  assignment are taken care of by the generic functions
* drop _gd logic

Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-10-27 08:01:36 +01:00
Anatolij Gustschin 8c9940d5ec eb_cpu5282: fix CONFIG_DM_VIDEO build warnings
Remove CONFIG_VIDEO dependency to fix board removal warnings.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jens Scharsig <esw@bus-elektronik.de>
2020-10-26 20:55:29 +01:00
Tom Rini 001ab99325 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-samsung 2020-10-23 09:19:12 -04:00
Michael Walle 4ceb5c6db2 board: kontron: add sl28 support
Add basic support for the Kontron SMARC-sAL28 board. This includes just
the bare minimum to be able to bring up the board and boot linux.

For now, the Single and Dual PHY variant is supported. Other variants
will fall back to the basic variant.

In particular, there is no watchdog support for now. This means that you
have to disable the default watchdog, otherwise you'll end up in the
recovery bootloader. See the board README for details.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-23 16:52:09 +05:30
Heiko Schocher dddfde5401 rtc: move pcf8563 to Kconfig
add Kconfig option for pcf8563 driver and
run tools/moveconfig.py

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22 11:26:14 -04:00
Holger Brunck 0e3eb47605 km/common: change ubicopy variable
Instead having a hard coded value for "cramfsaddr" after compile time,
we change it to take the variable "cramfsaddr" for the ubicopy variable.
This makes sure that ubicopy uses the right address, even when
the value for "cramfsaddr" has changed.

CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-10-22 11:26:08 -04:00
Holger Brunck 6a0952a332 km: adapt defines and variables for new memory layout
Due to increasing kernel image sizes we get problems when decompressing
the kernel image. To fix this we need to change the addresses where we
load and where we extract the kernel. Also we need to adapt the address
where to load the CRAMFS image and where to load the DTB file.
While at it also harmonize all boards for PPC and ARM to have the
same values. Also we add a new variable "env_version", so that the
userspace is able to detect if this is a u-boot binary with updated
values or not.

CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
CC: Heiko Schocher <hs@denx.de>
CC: Tom Rini <trini@konsulko.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
[trini: Remove old values from kmp204x.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-22 11:25:33 -04:00
Holger Brunck 5d57dfad3f km: fix license string and compatible strings
As the ownership is now Hitachi Power Grids, change the license string
and adapt the compatible string in DTS files. For kmeter1.dts we
change it to "keymile,KMETER1" for now, as this is then compliant with
what is submitted to the linux kernel. All other boards don't have
a upstreamed version in linux mainline.

Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
CC: Heiko Schocher <hs@denx.de>
CC: Marek Vasut <marex@denx.de>
CC: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2020-10-22 09:54:54 -04:00
Tom Rini 7ec87e4192 Merge tag 'u-boot-atmel-2021.01-b' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel
Second set of u-boot-atmel features for 2021.01 cycle:

This feature set brings the rework of the clock tree for sam9x60 SoC.
This makes the clock tree fully compatible with Common Clock Framework
and allows full clock configuration in U-Boot. This means that the
sam9x60 boards can boot now using U-Boot.
This also includes the definitions for sam9x60 SiPs and a divisor fix
for the clock on sama7g5 SoC.
2020-10-19 09:29:05 -04:00
Claudiu Beznea 53040bc4d9 board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR
Heap base address is computed based on SYS_INIT_SP_ADDR by
subtracting the SYS_MALLOC_F_LEN value in
board_init_f_init_reserve().

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2020-10-19 09:19:53 +03:00
Patrick Delaunay 8fc78fc73b configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs
Done with:
./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:27:01 +02:00
Patrick Delaunay f9a48654ee configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_RLE8

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:26:14 +02:00
Patrick Delaunay 0ed6c0f9cb configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigs
Done with:
./tools/moveconfig.py VIDEO_BMP_GZIP

The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN
are not activated in these defconfigs:
- trats_defconfig
- s5pc210_universal_defconfig
- trats2_defconfig

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-10-18 15:25:28 +02:00
Andre Heider c87afd39d1 configs: smdkv310: get rid of unused EXYNOS4_DEFAULT_UART_OFFSET
Unused.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15 13:33:22 +09:00
Andre Heider 9c04265f76 treewide: configs: fold CONFIG_DEFAULT_CONSOLE
In prepartion to remove CONFIG_DEFAULT_CONSOLE, fold the current users.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15 13:33:22 +09:00
Andre Heider ac79cfc2a4 treewide: configs: get rid of unused CONFIG_DEFAULT_CONSOLE
These are all unused.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2020-10-15 13:33:22 +09:00
Pali Rohár 8369886b40 arm: mvebu: Remove old comments from configs/mvebu_armada-37xx.h file
These comments are relict for old, now removed config options.
So remove these obsoleted comments too.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-14 07:56:17 +02:00
Tom Rini 47e9c70421 Merge tag 'ti-v2021.01-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti
- Minor cleanup on K3 env variables
- Fix OSPI compatible for J721e
- Drop unused property in omap-usb2-phy
- Update Maintainer for am335x-guardian board.
2020-10-12 07:26:57 -04:00
Nishanth Menon 87b4521fd8 configs: am65x_evm: Use DEFAULT_LINUX_BOOT_ENV and remove overlayaddr
Use DEFAULT_LINUX_BOOT_ENV to define the standard addresses used in rest
of TI platforms as defined in ti_armv7_common.h

This avoids the standard pitfalls we've had with kernel images and fdt
addresses stomping on each other.

As part of this process, redefine overlayaddr to be dtboaddr (defined
in ti_armv7_common.h for this very purpose) and get rid of the
definition of overlayaddr..

Signed-off-by: Nishanth Menon <nm@ti.com>
2020-10-12 08:09:53 +05:30