Commit Graph

15 Commits

Author SHA1 Message Date
Mario Six
9671f696e5 video_osd: Add ihs_video_out driver
Add a driver for IHS OSDs on IHS FPGAs.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-28 18:26:44 +02:00
Songjun Wu
e6a419c5f7 at91: video: DT binding for HLCDC driver
DT binding documentation for atmel HLCDC driver.

Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
2017-04-14 15:42:42 +02:00
Jacob Chen
c87c30e3ba doc: dt-bindings: Describe rockchip LVDS interface
I didn't have a common board to enable LVDS.
So add this dcocument to help others who want to enable LVDS in their board.

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-03-14 22:24:44 +01:00
Simon Glass
bcd5dfffe6 dm: video: Add support for the Parade PS8622/625 bridge
This chip provides an eDP to LVDS bridge which is useful for SoCs that don't
support LVDS displays (or it would waste scarce pins). The setup is included
in the device tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-05 21:06:13 -06:00
Simon Glass
12e671142d fdt: Add binding decode function for display-timings
This is useful for display parameters. Add a simple decode function to read
from this device tree node.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:06 -07:00
Ajay Kumar
9018efa7e2 video: exynos_fb: configure backlight GPIOs if specified in DT
Add support to configure PWM_OUT(PWM output) GPIO and
BL_EN(backlight enable) GPIO, if provided in FIMD DT node.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-04-06 14:34:40 +09:00
Simon Glass
effcf067df x86: Add initial video device init for Intel GMA
Intel's Graphics Media Accelerator (GMA) is a generic name for a wide range
of video devices. Add code to set up the hardware on ivybridge. Part of the
init happens in native code, part of it happens in a 16-bit option ROM for
those nostalgic for the 1970s.

Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-25 07:11:16 -07:00
Ajay Kumar
45c480c9f6 video: exynos_fimd: Add framework to disable FIMD sysmmu
On Exynos5420 and newer versions, the FIMD sysmmus are in
"on state" by default.
We have to disable them in order to make FIMD DMA work.
This patch adds the required framework to exynos_fimd driver,
and disables FIMD sysmmu on Exynos5420.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-09-05 20:37:07 +09:00
Albert ARIBAUD
ab6423cae0 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Trivial merge conflict, needed to manually remove
local_info as per commit 41364f0f.

Conflicts:
	board/samsung/common/board.c
2014-03-25 10:53:15 +01:00
Simon Glass
7d95f2a329 sandbox: Add LCD driver
Add a simple LCD driver which uses SDL to display the image. We update the
image regularly, while still providing for reasonable performance.

Adjust the common lcd code to support sandbox.

For command-line runs we do not want the LCD to be displayed, so add a
--show_lcd option to enable it.

Tested-by: Che-Liang Chiou <clchiou@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-03-17 20:05:49 -06:00
Piotr Wilczek
de461c526e video:mipidsim:fdt: Add DT support for mipi dsim driver
This patch enables parsing mipi data from device tree.
Non device tree case is still supported.

Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2014-03-12 19:54:59 +09:00
Stephen Warren
6a195d2d8a lcd: add functions to set up simplefb device tree
simple-framebuffer is a new device tree binding that describes a pre-
configured frame-buffer memory region and its format. The Linux kernel
contains a driver that supports this binding. Implement functions to
create a DT node (or fill in an existing node) with parameters that
describe the framebuffer format that U-Boot is using.

This will be immediately used by the Raspberry Pi board in U-Boot, and
likely will be used by the Samsung ARM ChromeBook support soon too. It
could well be used by many other boards (e.g. Tegra boards with built-in
LCD panels, which aren't yet supported by the Linux kernel).

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Simon Glass <sjg@chromium.org>
2013-06-05 22:40:03 +02:00
Ajay Kumar
71e6ba4655 EXYNOS5: Add device node for DP
Add DT node and bindings documentaion for DP.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-27 21:23:18 +09:00
Ajay Kumar
9a1313e1c1 EXYNOS5: Add device node for FIMD
Add DT node and bindings documentation for FIMD.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-03-27 21:19:09 +09:00
Simon Glass
eefe3e598e tegra: fdt: Add LCD definitions for Tegra
Add LCD definitions and also a proposed binding for LCD displays.

The PWM is as per what will likely be committed to linux-next soon.

The displaymode binding comes from a proposal here:

http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html

The panel binding is new, and fills a need to specify the panel
timings and other tegra-specific information. Should a binding appear
that allows the pwm to handle this automatically, we can revisit
this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-11-19 08:15:36 -07:00