Merge tag 'dm-pull-14nov19' of git://git.denx.de/u-boot-dm

Add OP-TEE test swuit
Fix patman cc_file output
Minor sandbox/pinctrl changes

Makefile

@@ -770,6 +770,7 @@ libs-$(CONFIG_API) += api/
 libs-$(CONFIG_HAS_POST) += post/
 libs-$(CONFIG_UNIT_TEST) += test/ test/dm/
 libs-$(CONFIG_UT_ENV) += test/env/
+libs-$(CONFIG_UT_OPTEE) += test/optee/
 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
 
 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)

arch/sandbox/cpu/os.c

@@ -816,10 +816,10 @@ void *os_find_text_base(void)
 		char *end = memchr(line, '-', len);
 
 		if (end) {
-			unsigned long long addr;
+			uintptr_t addr;
 
 			*end = '\0';
-			if (sscanf(line, "%llx", &addr) == 1)
+			if (sscanf(line, "%zx", &addr) == 1)
 				base = (void *)addr;
 		}
 	}

common/image-fdt.c

@@ -17,6 +17,7 @@
 #include <linux/libfdt.h>
 #include <mapmem.h>
 #include <asm/io.h>
+#include <tee/optee.h>
 
 #ifndef CONFIG_SYS_FDT_PAD
 #define CONFIG_SYS_FDT_PAD 0x3000
@@ -561,6 +562,13 @@ int image_setup_libfdt(bootm_headers_t *images, void *blob,
 		}
 	}
 
+	fdt_ret = optee_copy_fdt_nodes(gd->fdt_blob, blob);
+	if (fdt_ret) {
+		printf("ERROR: transfer of optee nodes to new fdt failed: %s\n",
+		       fdt_strerror(fdt_ret));
+		goto err;
+	}
+
 	/* Delete the old LMB reservation */
 	if (lmb)
 		lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob,

drivers/pinctrl/pinctrl-uclass.c

@@ -15,18 +15,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int pinctrl_decode_pin_config(const void *blob, int node)
-{
-	int flags = 0;
-
-	if (fdtdec_get_bool(blob, node, "bias-pull-up"))
-		flags |= 1 << PIN_CONFIG_BIAS_PULL_UP;
-	else if (fdtdec_get_bool(blob, node, "bias-pull-down"))
-		flags |= 1 << PIN_CONFIG_BIAS_PULL_DOWN;
-
-	return flags;
-}
-
 #if CONFIG_IS_ENABLED(PINCTRL_FULL)
 /**
  * pinctrl_config_one() - apply pinctrl settings for a single node

include/dm/pinctrl.h

@@ -369,19 +369,6 @@ int pinctrl_request_noflags(struct udevice *dev, int func);
  */
 int pinctrl_get_periph_id(struct udevice *dev, struct udevice *periph);
 
-/**
- * pinctrl_decode_pin_config() - decode pin configuration flags
- *
- * This decodes some of the PIN_CONFIG values into flags, with each value
- * being (1 << pin_cfg). This does not support things with values like the
- * slew rate.
- *
- * @blob:	Device tree blob
- * @node:	Node containing the PIN_CONFIG values
- * @return decoded flag value, or -ve on error
- */
-int pinctrl_decode_pin_config(const void *blob, int node);
-
 /**
  * pinctrl_get_gpio_mux() - get the mux value for a particular GPIO
  *

include/fdtdec.h

@@ -1061,6 +1061,7 @@ static inline int fdtdec_set_phandle(void *blob, int node, uint32_t phandle)
  * @param basename	base name of the node to create
  * @param carveout	information about the carveout region
  * @param phandlep	return location for the phandle of the carveout region
+ *			can be NULL if no phandle should be added
  * @return 0 on success or a negative error code on failure
  */
 int fdtdec_add_reserved_memory(void *blob, const char *basename,

include/tee/optee.h

@@ -67,4 +67,13 @@ static inline int optee_verify_bootm_image(unsigned long image_addr,
 }
 #endif
 
+#if defined(CONFIG_OPTEE) && defined(CONFIG_OF_LIBFDT)
+int optee_copy_fdt_nodes(const void *old_blob, void *new_blob);
+#else
+static inline int optee_copy_fdt_nodes(const void *old_blob, void *new_blob)
+{
+	return 0;
+}
+#endif
+
 #endif /* _OPTEE_H */

include/test/optee.h

@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH
+ */
+
+#ifndef __TEST_OPTEE_H__
+#define __TEST_OPTEE_H__
+
+#include <test/test.h>
+
+/* Declare a new environment test */
+#define OPTEE_TEST(_name, _flags)	UNIT_TEST(_name, _flags, optee_test)
+
+#endif /* __TEST_OPTEE_H__ */

include/test/suites.h

@@ -28,6 +28,7 @@ int do_ut_compression(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
 int do_ut_dm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 int do_ut_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 int do_ut_lib(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
+int do_ut_optee(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 int do_ut_overlay(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 int do_ut_time(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 int do_ut_unicode(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);

lib/fdtdec.c

@@ -1309,7 +1309,8 @@ int fdtdec_add_reserved_memory(void *blob, const char *basename,
 		}
 
 		if (addr == carveout->start && (addr + size) == carveout->end) {
-			*phandlep = fdt_get_phandle(blob, node);
+			if (phandlep)
+				*phandlep = fdt_get_phandle(blob, node);
 			return 0;
 		}
 	}
@@ -1338,13 +1339,15 @@ int fdtdec_add_reserved_memory(void *blob, const char *basename,
 	if (node < 0)
 		return node;
 
-	err = fdt_generate_phandle(blob, &phandle);
+	if (phandlep) {
-	if (err < 0)
+		err = fdt_generate_phandle(blob, &phandle);
-		return err;
+		if (err < 0)
+			return err;
 
-	err = fdtdec_set_phandle(blob, node, phandle);
+		err = fdtdec_set_phandle(blob, node, phandle);
-	if (err < 0)
+		if (err < 0)
-		return err;
+			return err;
+	}
 
 	/* store one or two address cells */
 	if (na > 1)

lib/optee/optee.c

@@ -5,6 +5,8 @@
  */
 
 #include <common.h>
+#include <malloc.h>
+#include <linux/libfdt.h>
 #include <tee/optee.h>
 
 #define optee_hdr_err_msg \
@@ -63,3 +65,141 @@ error:
 
 	return ret;
 }
+
+#if defined(CONFIG_OF_LIBFDT)
+static int optee_copy_firmware_node(const void *old_blob, void *fdt_blob)
+{
+	int old_offs, offs, ret, len;
+	const void *prop;
+
+	old_offs = fdt_path_offset(old_blob, "/firmware/optee");
+	if (old_offs < 0) {
+		debug("Original OP-TEE Device Tree node not found");
+		return old_offs;
+	}
+
+	offs = fdt_path_offset(fdt_blob, "/firmware");
+	if (offs < 0) {
+		offs = fdt_path_offset(fdt_blob, "/");
+		if (offs < 0)
+			return offs;
+
+		offs = fdt_add_subnode(fdt_blob, offs, "firmware");
+		if (offs < 0)
+			return offs;
+	}
+
+	offs = fdt_add_subnode(fdt_blob, offs, "optee");
+	if (offs < 0)
+		return ret;
+
+	/* copy the compatible property */
+	prop = fdt_getprop(old_blob, old_offs, "compatible", &len);
+	if (!prop) {
+		debug("missing OP-TEE compatible property");
+		return -EINVAL;
+	}
+
+	ret = fdt_setprop(fdt_blob, offs, "compatible", prop, len);
+	if (ret < 0)
+		return ret;
+
+	/* copy the method property */
+	prop = fdt_getprop(old_blob, old_offs, "method", &len);
+	if (!prop) {
+		debug("missing OP-TEE method property");
+		return -EINVAL;
+	}
+
+	ret = fdt_setprop(fdt_blob, offs, "method", prop, len);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int optee_copy_fdt_nodes(const void *old_blob, void *new_blob)
+{
+	int nodeoffset, subnode, ret;
+	struct fdt_resource res;
+
+	if (fdt_check_header(old_blob))
+		return -EINVAL;
+
+	if (fdt_check_header(new_blob))
+		return -EINVAL;
+
+	/* only proceed if there is an /firmware/optee node */
+	if (fdt_path_offset(old_blob, "/firmware/optee") < 0) {
+		debug("No OP-TEE firmware node in old fdt, nothing to do");
+		return 0;
+	}
+
+	/*
+	 * Do not proceed if the target dt already has an OP-TEE node.
+	 * In this case assume that the system knows better somehow,
+	 * so do not interfere.
+	 */
+	if (fdt_path_offset(new_blob, "/firmware/optee") >= 0) {
+		debug("OP-TEE Device Tree node already exists in target");
+		return 0;
+	}
+
+	ret = optee_copy_firmware_node(old_blob, new_blob);
+	if (ret < 0) {
+		printf("Failed to add OP-TEE firmware node\n");
+		return ret;
+	}
+
+	/* optee inserts its memory regions as reserved-memory nodes */
+	nodeoffset = fdt_subnode_offset(old_blob, 0, "reserved-memory");
+	if (nodeoffset >= 0) {
+		subnode = fdt_first_subnode(old_blob, nodeoffset);
+		while (subnode >= 0) {
+			const char *name = fdt_get_name(old_blob,
+							subnode, NULL);
+			if (!name)
+				return -EINVAL;
+
+			/* only handle optee reservations */
+			if (strncmp(name, "optee", 5))
+				continue;
+
+			/* check if this subnode has a reg property */
+			ret = fdt_get_resource(old_blob, subnode, "reg", 0,
+					       &res);
+			if (!ret) {
+				struct fdt_memory carveout = {
+					.start = res.start,
+					.end = res.end,
+				};
+				char *oldname, *nodename, *tmp;
+
+				oldname = strdup(name);
+				if (!oldname)
+					return -ENOMEM;
+
+				tmp = oldname;
+				nodename = strsep(&tmp, "@");
+				if (!nodename) {
+					free(oldname);
+					return -EINVAL;
+				}
+
+				ret = fdtdec_add_reserved_memory(new_blob,
+								 nodename,
+								 &carveout,
+								 NULL);
+				free(oldname);
+
+				if (ret < 0)
+					return ret;
+			}
+
+			subnode = fdt_next_subnode(old_blob, subnode);
+		}
+	}
+
+	return 0;
+}
+#endif

test/Kconfig

@@ -33,4 +33,5 @@ config UT_UNICODE
 
 source "test/dm/Kconfig"
 source "test/env/Kconfig"
+source "test/optee/Kconfig"
 source "test/overlay/Kconfig"

test/cmd_ut.c

@@ -43,6 +43,9 @@ static cmd_tbl_t cmd_ut_sub[] = {
 #if defined(CONFIG_UT_ENV)
 	U_BOOT_CMD_MKENT(env, CONFIG_SYS_MAXARGS, 1, do_ut_env, "", ""),
 #endif
+#ifdef CONFIG_UT_OPTEE
+	U_BOOT_CMD_MKENT(optee, CONFIG_SYS_MAXARGS, 1, do_ut_optee, "", ""),
+#endif
 #ifdef CONFIG_UT_OVERLAY
 	U_BOOT_CMD_MKENT(overlay, CONFIG_SYS_MAXARGS, 1, do_ut_overlay, "", ""),
 #endif
@@ -114,6 +117,9 @@ static char ut_help_text[] =
 #ifdef CONFIG_UT_LIB
 	"ut lib [test-name] - test library functions\n"
 #endif
+#ifdef CONFIG_UT_OPTEE
+	"ut optee [test-name]\n"
+#endif
 #ifdef CONFIG_UT_OVERLAY
 	"ut overlay [test-name]\n"
 #endif

test/optee/Kconfig

@@ -0,0 +1,7 @@
+config UT_OPTEE
+	bool "Enable OP-TEE Unit Tests"
+	depends on UNIT_TEST && OF_CONTROL && OPTEE
+	default y
+	help
+	  This enables the 'ut optee' command which runs a series of unit
+	  tests on the optee library code..

test/optee/Makefile

@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH
+
+# Test files
+obj-y += cmd_ut_optee.o
+
+DTC_FLAGS += -@
+
+# DT overlays
+obj-y += test-optee-base.dtb.o
+obj-y += test-optee-optee.dtb.o
+obj-y += test-optee-no-optee.dtb.o

test/optee/cmd_ut_optee.c

@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <common.h>
+#include <command.h>
+#include <errno.h>
+#include <fdt_support.h>
+#include <malloc.h>
+#include <tee/optee.h>
+
+#include <linux/sizes.h>
+
+#include <test/ut.h>
+#include <test/optee.h>
+#include <test/suites.h>
+
+/* 4k ought to be enough for anybody */
+#define FDT_COPY_SIZE	(4 * SZ_1K)
+
+extern u32 __dtb_test_optee_base_begin;
+extern u32 __dtb_test_optee_optee_begin;
+extern u32 __dtb_test_optee_no_optee_begin;
+
+static void *fdt;
+static bool expect_success;
+
+static int optee_fdt_firmware(struct unit_test_state *uts)
+{
+	const void *prop;
+	int offs, len;
+
+	offs = fdt_path_offset(fdt, "/firmware/optee");
+	ut_assert(expect_success ? offs >= 0 : offs < 0);
+
+	/* only continue if we have an optee node */
+	if (offs < 0)
+		return CMD_RET_SUCCESS;
+
+	prop = fdt_getprop(fdt, offs, "compatible", &len);
+	ut_assertok(strncmp((const char *)prop, "linaro,optee-tz", len));
+
+	prop = fdt_getprop(fdt, offs, "method", &len);
+	ut_assert(strncmp(prop, "hvc", 3) == 0 || strncmp(prop, "smc", 3) == 0);
+
+	return CMD_RET_SUCCESS;
+}
+OPTEE_TEST(optee_fdt_firmware, 0);
+
+static int optee_fdt_protected_memory(struct unit_test_state *uts)
+{
+	int offs, subnode;
+	bool found;
+
+	offs = fdt_path_offset(fdt, "/firmware/optee");
+	ut_assert(expect_success ? offs >= 0 : offs < 0);
+
+	/* only continue if we have an optee node */
+	if (offs < 0)
+		return CMD_RET_SUCCESS;
+
+	/* optee inserts its memory regions as reserved-memory nodes */
+	offs = fdt_subnode_offset(fdt, 0, "reserved-memory");
+	ut_assert(offs >= 0);
+
+	subnode = fdt_first_subnode(fdt, offs);
+	ut_assert(subnode);
+
+	found = 0;
+	while (subnode >= 0) {
+		const char *name = fdt_get_name(fdt, subnode, NULL);
+		struct fdt_resource res;
+
+		ut_assert(name);
+
+		/* only handle optee reservations */
+		if (strncmp(name, "optee", 5))
+			continue;
+
+		found = true;
+
+		/* check if this subnode has a reg property */
+		ut_assertok(fdt_get_resource(fdt, subnode, "reg", 0, &res));
+		subnode = fdt_next_subnode(fdt, subnode);
+	}
+
+	ut_assert(found);
+
+	return CMD_RET_SUCCESS;
+}
+OPTEE_TEST(optee_fdt_protected_memory, 0);
+
+int do_ut_optee(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct unit_test *tests = ll_entry_start(struct unit_test,
+						 optee_test);
+	const int n_ents = ll_entry_count(struct unit_test, optee_test);
+	struct unit_test_state *uts;
+	void *fdt_optee = &__dtb_test_optee_optee_begin;
+	void *fdt_no_optee = &__dtb_test_optee_no_optee_begin;
+	void *fdt_base = &__dtb_test_optee_base_begin;
+	int ret = -ENOMEM;
+
+	uts = calloc(1, sizeof(*uts));
+	if (!uts)
+		return -ENOMEM;
+
+	ut_assertok(fdt_check_header(fdt_base));
+	ut_assertok(fdt_check_header(fdt_optee));
+	ut_assertok(fdt_check_header(fdt_no_optee));
+
+	fdt = malloc(FDT_COPY_SIZE);
+	if (!fdt)
+		return ret;
+
+	/*
+	 * Resize the FDT to 4k so that we have room to operate on
+	 *
+	 * (and relocate it since the memory might be mapped
+	 * read-only)
+	 */
+	ut_assertok(fdt_open_into(fdt_base, fdt, FDT_COPY_SIZE));
+
+	/*
+	 * (1) Try to copy optee nodes from empty dt.
+	 * This should still run successfully.
+	 */
+	ut_assertok(optee_copy_fdt_nodes(fdt_no_optee, fdt));
+
+	expect_success = false;
+	ret = cmd_ut_category("optee", tests, n_ents, argc, argv);
+
+	/* (2) Try to copy optee nodes from prefilled dt */
+	ut_assertok(optee_copy_fdt_nodes(fdt_optee, fdt));
+
+	expect_success = true;
+	ret = cmd_ut_category("optee", tests, n_ents, argc, argv);
+
+	/* (3) Try to copy OP-TEE nodes into a already filled DT */
+	ut_assertok(fdt_open_into(fdt_optee, fdt, FDT_COPY_SIZE));
+	ut_assertok(optee_copy_fdt_nodes(fdt_optee, fdt));
+
+	expect_success = true;
+	ret = cmd_ut_category("optee", tests, n_ents, argc, argv);
+
+	free(fdt);
+	return ret;
+}

test/optee/test-optee-base.dts

@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+};
+
+

test/optee/test-optee-no-optee.dts

@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+};
+
+

test/optee/test-optee-optee.dts

@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019, Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		optee_shm@32000000 {
+			reg = <0x00 0x32000000 0x00 0x400000>;
+		};
+
+		optee_core@30000000 {
+			reg = <0x00 0x30000000 0x00 0x2000000>;
+		};
+	};
+};

tools/patman/cros_subprocess.py

@@ -6,11 +6,11 @@
 # Licensed to PSF under a Contributor Agreement.
 # See http://www.python.org/2.4/license for licensing details.
 
-"""Subprocress execution
+"""Subprocess execution
 
 This module holds a subclass of subprocess.Popen with our own required
 features, mainly that we get access to the subprocess output while it
-is running rather than just at the end. This makes it easiler to show
+is running rather than just at the end. This makes it easier to show
 progress information and filter output in real time.
 """
 

tools/patman/gitutil.py

@@ -23,7 +23,7 @@ def LogCmd(commit_range, git_dir=None, oneline=False, reverse=False,
 
     Args:
         commit_range: Range expression to use for log, None for none
-        git_dir: Path to git repositiory (None to use default)
+        git_dir: Path to git repository (None to use default)
         oneline: True to use --oneline, else False
         reverse: True to reverse the log (--reverse)
         count: Number of commits to list, or None for no limit
@@ -166,7 +166,7 @@ def CountCommitsInRange(git_dir, range_expr):
         git_dir: Directory containing git repo
         range_expr: Range to check
     Return:
-        Number of patches that exist in the supplied rangem or None if none
+        Number of patches that exist in the supplied range or None if none
         were found
     """
     pipe = [LogCmd(range_expr, git_dir=git_dir, oneline=True)]

tools/patman/series.py

@@ -251,7 +251,7 @@ class Series(dict):
             cover_cc = [tools.FromUnicode(m) for m in cover_cc]
             cc_list = '\0'.join([tools.ToUnicode(x)
                                  for x in sorted(set(cover_cc + all_ccs))])
-            print(cover_fname, cc_list.encode('utf-8'), file=fd)
+            print(cover_fname, cc_list, file=fd)
 
         fd.close()
         return fname

tools/patman/terminal.py

@@ -128,7 +128,7 @@ class Color(object):
         return ''
 
     def Stop(self):
-        """Retruns a stop color code.
+        """Returns a stop color code.
 
         Returns:
           If color is enabled, returns an ANSI color reset sequence,