diff --git a/README b/README index cb08816741..bbe5789a67 100644 --- a/README +++ b/README @@ -1723,12 +1723,12 @@ The following options need to be configured: => If you now switch to the new I2C Bus 3 with "i2c dev 3" - u-boot sends First the Commando to the mux@70 to enable - channel 6, and then the Commando to the mux@71 to enable + u-boot first sends the command to the mux@70 to enable + channel 6, and then the command to the mux@71 to enable the channel 4. After that, you can use the "normal" i2c commands as - usual, to communicate with your I2C devices behind + usual to communicate with your I2C devices behind the 2 muxes. This option is actually implemented for the bitbanging diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 26b41b4c3b..4fc51fdc75 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -24,7 +24,7 @@ #ifndef __ASM_GBL_DATA_H #define __ASM_GBL_DATA_H /* - * The following data structure is placed in some memory wich is + * The following data structure is placed in some memory which is * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or * some locked parts of the data cache) to allow for a minimum set of * global variables during system initialization (until we have set diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 9f4b22c553..e911377dc6 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -250,7 +250,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn /* * For a FRAM device there is no limit on the number of the - * bytes that can be ccessed with the single read or write + * bytes that can be accessed with the single read or write * operation. */ #if !defined(CONFIG_SYS_I2C_FRAM) diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index d913e13665..3ea75f75fd 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1397,8 +1397,8 @@ static int i2c_mux_get_busid (void) return tmp; } -/* Analyses a Muxstring and sends immediately the - Commands to the Muxes. Runs from Flash. +/* Analyses a Muxstring and immediately sends the + commands to the muxes. Runs from flash. */ int i2c_mux_ident_muxstring_f (uchar *buf) { diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 71251d8007..966ffc4bff 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -399,7 +399,7 @@ static void wait_for_bb (void) int timeout = I2C_TIMEOUT; u16 stat; - writew(0xFFFF, &i2c_base->stat); /* clear current interruts...*/ + writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/ while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) { writew (stat, &i2c_base->stat); udelay(1000); diff --git a/include/altera.h b/include/altera.h index bc21ddfff9..f28a6a8bc3 100644 --- a/include/altera.h +++ b/include/altera.h @@ -51,18 +51,18 @@ typedef enum { /* typedef Altera_iface */ passive_parallel_asynchronous, /* parallel data */ passive_serial_asynchronous, /* serial data w/ internal clock (not used) */ altera_jtag_mode, /* jtag/tap serial (not used ) */ - fast_passive_parallel, /* fast passive parallel (FPP) */ + fast_passive_parallel, /* fast passive parallel (FPP) */ fast_passive_parallel_security, /* fast passive parallel with security (FPPS) */ max_altera_iface_type /* insert all new types before this */ } Altera_iface; /* end, typedef Altera_iface */ typedef enum { /* typedef Altera_Family */ - min_altera_type, /* insert all new types after this */ - Altera_ACEX1K, /* ACEX1K Family */ - Altera_CYC2, /* CYCLONII Family */ + min_altera_type, /* insert all new types after this */ + Altera_ACEX1K, /* ACEX1K Family */ + Altera_CYC2, /* CYCLONII Family */ Altera_StratixII, /* StratixII Familiy */ /* Add new models here */ - max_altera_type /* insert all new types before this */ + max_altera_type /* insert all new types before this */ } Altera_Family; /* end, typedef Altera_Family */ typedef struct { /* typedef Altera_desc */