Update board NetStar
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
This commit is contained in:
Peter Pearse
parent
fe891ecf4d
commit
f4e7cbfcb0
11
Makefile
11
Makefile
@ -2348,17 +2348,8 @@ mx1ads_config : unconfig
|
||||
mx1fs2_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
|
||||
|
||||
netstar_32_config \
|
||||
netstar_config: unconfig
|
||||
@mkdir -p $(obj)include
|
||||
@if [ "$(findstring _32_,$@)" ] ; then \
|
||||
$(XECHO) "... 32MB SDRAM" ; \
|
||||
echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>$(obj)include/config.h ; \
|
||||
else \
|
||||
$(XECHO) "... 64MB SDRAM" ; \
|
||||
echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>$(obj)include/config.h ; \
|
||||
fi
|
||||
@$(MKCONFIG) -a netstar arm arm925t netstar
|
||||
@$(MKCONFIG) $(@:_config=) arm arm925t netstar
|
||||
|
||||
omap1510inn_config : unconfig
|
||||
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
|
||||
|
||||
@ -45,23 +45,12 @@ static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd)
|
||||
this->IO_ADDR_W = (void *) IO_ADDR_W;
|
||||
}
|
||||
|
||||
/*
|
||||
* chip R/B detection
|
||||
*/
|
||||
/***
|
||||
static int netstar_nand_ready(struct mtd_info *mtd)
|
||||
{
|
||||
return (*(volatile ushort *)GPIO_DATA_INPUT_REG) & 0x02;
|
||||
}
|
||||
***/
|
||||
|
||||
int board_nand_init(struct nand_chip *nand)
|
||||
{
|
||||
nand->options = NAND_SAMSUNG_LP_OPTIONS;
|
||||
nand->eccmode = NAND_ECC_SOFT;
|
||||
nand->hwcontrol = netstar_nand_hwcontrol;
|
||||
/* nand->dev_ready = netstar_nand_ready; */
|
||||
nand->chip_delay = 18;
|
||||
nand->chip_delay = 400;
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -48,14 +48,15 @@
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
|
||||
#define CFG_DEVICE_NULLDEV 1 /* enable null device */
|
||||
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
|
||||
#define CFG_CONSOLE_INFO_QUIET
|
||||
|
||||
/*
|
||||
* Physical Memory Map
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
||||
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
|
||||
#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
|
||||
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
||||
|
||||
/*
|
||||
@ -63,30 +64,21 @@
|
||||
*/
|
||||
#define CFG_FLASH_BASE PHYS_FLASH_1
|
||||
#define CFG_MAX_FLASH_BANKS 1
|
||||
#if (PHYS_SDRAM_1_SIZE == SZ_32M)
|
||||
/*#if 1*/
|
||||
#define CFG_FLASH_CFI /* Flash is CFI conformant */
|
||||
#define CFG_FLASH_CFI_DRIVER /* Use the common driver */
|
||||
#define CFG_FLASH_EMPTY_INFO
|
||||
#define CFG_MAX_FLASH_SECT 128
|
||||
#else
|
||||
#define PHYS_FLASH_1_SIZE SZ_1M
|
||||
#define PHYS_FLASH_1_SIZE (1 * 1024 * 1024)
|
||||
#define CFG_MAX_FLASH_SECT 19
|
||||
#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */
|
||||
#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ)
|
||||
#endif
|
||||
|
||||
#define CFG_MONITOR_BASE PHYS_FLASH_1
|
||||
#define CFG_MONITOR_LEN SZ_256K
|
||||
#define CFG_MONITOR_LEN (256 * 1024)
|
||||
|
||||
/*
|
||||
* Environment settings
|
||||
*/
|
||||
#define CFG_ENV_IS_IN_FLASH
|
||||
#define ENV_IS_SOLITARY
|
||||
#define CFG_ENV_ADDR 0x4000
|
||||
#define CFG_ENV_SIZE SZ_8K
|
||||
#define CFG_ENV_SECT_SIZE SZ_8K
|
||||
#define CFG_ENV_SIZE (8 * 1024)
|
||||
#define CFG_ENV_SECT_SIZE (8 * 1024)
|
||||
#define CFG_ENV_ADDR_REDUND 0x6000
|
||||
#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
@ -95,14 +87,12 @@
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||||
/* XXX #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)*/
|
||||
#define CFG_MALLOC_LEN SZ_4M
|
||||
#define CFG_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
/*
|
||||
* The stack size is set up in start.S using the settings below
|
||||
*/
|
||||
/* XXX #define CONFIG_STACKSIZE SZ_8K /XXX* regular stack */
|
||||
#define CONFIG_STACKSIZE SZ_1M /* regular stack */
|
||||
#define CONFIG_STACKSIZE (1 * 1024 * 1024) /* regular stack */
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
@ -132,13 +122,16 @@
|
||||
#define CFG_MAX_NAND_DEVICE 1
|
||||
#define NAND_MAX_CHIPS 1
|
||||
#define CFG_NAND_BASE 0x04000000 + (2 << 23)
|
||||
#define NAND_ALLOW_ERASE_ALL 1
|
||||
|
||||
/*
|
||||
* JFFS2 partitions (mtdparts command line support)
|
||||
* partitions (mtdparts command line support)
|
||||
*/
|
||||
#define CONFIG_JFFS2_CMDLINE
|
||||
#define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0"
|
||||
#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)"
|
||||
#define MTDPARTS_DEFAULT "mtdparts=" \
|
||||
"omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \
|
||||
"omapnand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
|
||||
|
||||
|
||||
/*
|
||||
@ -176,36 +169,34 @@
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
|
||||
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
|
||||
#define CFG_AUTOLOAD "n" /* No autoload */
|
||||
#define CONFIG_BOOTCOMMAND "run nboot"
|
||||
#define CONFIG_BOOTCOMMAND "run fboot"
|
||||
#define CONFIG_PREBOOT "run setup"
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"setup=setenv bootargs console=ttyS0,$baudrate " \
|
||||
"$mtdparts\0" \
|
||||
"ospart=0\0" \
|
||||
"setpart=" \
|
||||
"if test -n $swapos; then " \
|
||||
"if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\
|
||||
"setenv swapos; saveenv; " \
|
||||
"else " \
|
||||
"chpart nand0,$ospart; " \
|
||||
"fi\0" \
|
||||
"nfsargs=setenv bootargs $bootargs " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
|
||||
"nfsroot=$rootpath root=/dev/nfs\0" \
|
||||
"flashargs=run setpart;setenv bootargs $bootargs " \
|
||||
"root=/dev/mtdblock$partition ro " \
|
||||
"rootfstype=jffs2\0" \
|
||||
"initrdargs=setenv bootargs $bootargs " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
||||
"iboot=bootp;run initrdargs;tftp;bootm\0" \
|
||||
"fboot=run flashargs;fsload /boot/uImage;bootm\0" \
|
||||
"nboot=bootp;run nfsargs;tftp;bootm\0"
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"autostart=yes\0" \
|
||||
"ospart=0\0" \
|
||||
"setup=setenv bootargs console=ttyS0,$baudrate " \
|
||||
"$mtdparts\0" \
|
||||
"setpart=" \
|
||||
"if test -n $swapos; then " \
|
||||
"setenv swapos; saveenv; " \
|
||||
"else " \
|
||||
"if test $ospart -eq 0; then setenv ospart 1;" \
|
||||
"else setenv ospart 0; fi; " \
|
||||
"fi\0" \
|
||||
"nfsargs=setenv bootargs $bootargs " \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
|
||||
"nfsroot=$rootpath root=/dev/nfs\0" \
|
||||
"flashargs=run setpart;setenv bootargs $bootargs " \
|
||||
"root=mtd:rootfs$ospart ro " \
|
||||
"rootfstype=jffs2\0" \
|
||||
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
||||
"fboot=run flashargs;nboot kernel$ospart\0" \
|
||||
"nboot=bootp;run nfsargs;tftp\0"
|
||||
|
||||
#if 0 /* feel free to disable for development */
|
||||
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
|
||||
#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d sec...\n"
|
||||
#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */
|
||||
#define CONFIG_BOOT_RETRY_TIME 30
|
||||
#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d secs...\n"
|
||||
#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
|
||||
#endif
|
||||
|
||||
/*
|
||||
@ -223,7 +214,8 @@
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
|
||||
#define CFG_MEMTEST_START PHYS_SDRAM_1
|
||||
#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE
|
||||
#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
|
||||
(CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE)
|
||||
|
||||
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user