blackfin: run core1 from L1 code sram start address in uboot init code on core 0

Define core 1 L1 code sram start address.
Add function to enable core 1 for BF609 and BF561.
Add config macro to allow customer to run core 1 in uboot init code on core 0.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
This commit is contained in:
Sonic Zhang committed 2013-05-13 15:47:24 +08:00
1 parent ddb5c5be1e
commit f4d8038439
5 files changed
+44

No files matched your search

+30
View File
@@ -23,6 +23,32 @@
ulong bfin_poweron_retx;
#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
void bfin_core1_start(void)
{
#ifdef BF561_FAMILY
/* Enable core 1 */
bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020);
#else
/* Enable core 1 */
bfin_write32(RCU0_SVECT1, COREB_L1_CODE_START);
bfin_write32(RCU0_CRCTL, 0);
bfin_write32(RCU0_CRCTL, 0x2);
/* Check if core 1 starts */
while (!(bfin_read32(RCU0_CRSTAT) & 0x2))
continue;
bfin_write32(RCU0_CRCTL, 0);
/* flag to notify cces core 1 application */
bfin_write32(SDU0_MSG_SET, (1 << 19));
#endif
}
#endif
__attribute__ ((__noreturn__))
void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
{
#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
@@ -72,6 +98,10 @@ void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
# endif
#endif
#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
bfin_core1_start();
#endif
serial_early_puts("Board init flash\n");
board_init_f(bootflag);
}
@@ -714,4 +714,6 @@
#define L1_INST_SRAM_SIZE (0xFFA03FFF - 0xFFA00000 + 1)
#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE)
#define COREB_L1_CODE_START 0xFF600000
#endif /* __BFIN_DEF_ADSP_BF561_proc__ */
@@ -244,4 +244,6 @@
#define L1_INST_SRAM_SIZE 0x8000
#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE)
#define COREB_L1_CODE_START 0xFF600000
#endif /* __BFIN_DEF_ADSP_BF609_proc__ */
+5
View File
@@ -98,6 +98,11 @@
*/
#define CONFIG_UART_CONSOLE 0
/*
* Run core 1 from L1 SRAM start address when init uboot on core 0
*/
/* #define CONFIG_CORE1_RUN 1 */
/*
* Pull in common ADI header for remaining command/environment setup
+5
View File
@@ -155,6 +155,11 @@
#undef CONFIG_UART_CONSOLE_IS_JTAG
#endif
/*
* Run core 1 from L1 SRAM start address when init uboot on core 0
*/
/* #define CONFIG_CORE1_RUN 1 */
/*
* Pull in common ADI header for remaining command/environment setup
*/