leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

odroid: usbhost - Add missing gpio_request call

Browse Source 
The USB host code was missing gpio_request() calls before using the gpio
functions, causing errors to be printed out.

As a side note calls to max77686_set_buck_mode(OPMODE_OFF/OPMODE_ON) have
been removed, as they did not have any effect. This is as per Przemyslaw:
I looked into the documentation and there is a "ENB8" pin in PMIC package.
This pin allows steering BUCK8 ON/OFF by the hardware. If ENB8 is set to low
then you can do on/off. If high, then you cannot change its state by I2C
write, which seems to be the case with the Odroids.

Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
This commit is contained in:
Suriyan Ramasami 2014-11-20 17:26:30 -08:00 committed by Minkyu Kang
parent c8322be057
commit f2cca34245
1 changed files with 11 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
board/samsung/odroid/odroid.c
View File

@ -382,6 +382,17 @@ static void board_gpio_init(void)
gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP);
gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X);
gpio_direction_input(EXYNOS4X12_GPIO_X31);
#ifdef CONFIG_CMD_USB
/* USB3503A Reference frequency */
gpio_request(EXYNOS4X12_GPIO_X30, "USB3503A RefFreq");
/* USB3503A Connect */
gpio_request(EXYNOS4X12_GPIO_X34, "USB3503A Connect");
/* USB3503A Reset */
gpio_request(EXYNOS4X12_GPIO_X35, "USB3503A Reset");
#endif
}
static int pmic_init_max77686(void)
@ -489,10 +500,8 @@ int board_usb_init(int index, enum usb_init_type init)
p_pmic = pmic_get("MAX77686_PMIC");
if (p_pmic && !pmic_probe(p_pmic)) {
max77686_set_buck_mode(p_pmic, 8, OPMODE_OFF);
max77686_set_buck_voltage(p_pmic, 8, 750000);
max77686_set_buck_voltage(p_pmic, 8, 3300000);
max77686_set_buck_mode(p_pmic, 8, OPMODE_ON);
}
#endif