powerpc/85xx: Adding configuration for DCSRCR to enable 32M access

Configuring DCSRCR to define the DCSR space to be 1G instead
of the default 4M. DCSRCR only allows selection of either 4M
or 1G.
Most DCSR registers are within 4M but the Nexus trace buffer
is located at offset 16M within the DCSR.

Configuring the LAW to be 32M to allow access to the Nexus
trace buffer. No TLB modification is required since accessing
the Nexus trace buffer from within u-boot is not required.

Signed-off-by: Stephen George <stephen.george@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/cpu/mpc85xx/cpu_init.c

@@ -222,6 +222,10 @@ static void corenet_tb_init(void)
 void cpu_init_f (void)
 {
 	extern void m8560_cpm_reset (void);
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
+
 #ifdef CONFIG_MPC8548
 	ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	uint svr = get_svr();
@@ -262,6 +266,13 @@ void cpu_init_f (void)
 
 	/* Invalidate the CPC before DDR gets enabled */
 	invalidate_cpc();
+
+ #ifdef CONFIG_SYS_DCSRBAR_PHYS
+	/* set DCSRCR so that DCSR space is 1G */
+	setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G);
+	in_be32(&gur->dcsrcr);
+#endif
+
 }
 
 /* Implement a dummy function for those platforms w/o SERDES */