ARM: meson: rename GXBB to GX
Taking into account the Amlogic Family name starts with GX, including the GXBB, GXL and GXM SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Neil Armstrong
Tom Rini
parent
8b41464547
commit
f0f3762cb7
arch/arm
board/amlogic
include/configs
69
arch/arm/include/asm/arch-meson/gx.h
Normal file
69
arch/arm/include/asm/arch-meson/gx.h
Normal file
@ -0,0 +1,69 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
|
||||
*/
|
||||
|
||||
#ifndef __GX_H__
|
||||
#define __GX_H__
|
||||
|
||||
#define GX_FIRMWARE_MEM_SIZE 0x1000000
|
||||
|
||||
#define GX_AOBUS_BASE 0xc8100000
|
||||
#define GX_PERIPHS_BASE 0xc8834400
|
||||
#define GX_HIU_BASE 0xc883c000
|
||||
#define GX_ETH_BASE 0xc9410000
|
||||
|
||||
/* Always-On Peripherals registers */
|
||||
#define GX_AO_ADDR(off) (GX_AOBUS_BASE + ((off) << 2))
|
||||
|
||||
#define GX_AO_SEC_GP_CFG0 GX_AO_ADDR(0x90)
|
||||
#define GX_AO_SEC_GP_CFG3 GX_AO_ADDR(0x93)
|
||||
#define GX_AO_SEC_GP_CFG4 GX_AO_ADDR(0x94)
|
||||
#define GX_AO_SEC_GP_CFG5 GX_AO_ADDR(0x95)
|
||||
|
||||
#define GX_AO_MEM_SIZE_MASK 0xFFFF0000
|
||||
#define GX_AO_MEM_SIZE_SHIFT 16
|
||||
#define GX_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000
|
||||
#define GX_AO_BL31_RSVMEM_SIZE_SHIFT 16
|
||||
#define GX_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
|
||||
|
||||
/* Peripherals registers */
|
||||
#define GX_PERIPHS_ADDR(off) (GX_PERIPHS_BASE + ((off) << 2))
|
||||
|
||||
/* GPIO registers 0 to 6 */
|
||||
#define _GX_GPIO_OFF(n) ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
|
||||
#define GX_GPIO_EN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 0)
|
||||
#define GX_GPIO_IN(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
|
||||
#define GX_GPIO_OUT(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
|
||||
|
||||
#define GX_ETH_REG_0 GX_PERIPHS_ADDR(0x50)
|
||||
#define GX_ETH_REG_1 GX_PERIPHS_ADDR(0x51)
|
||||
#define GX_ETH_REG_2 GX_PERIPHS_ADDR(0x56)
|
||||
#define GX_ETH_REG_3 GX_PERIPHS_ADDR(0x57)
|
||||
|
||||
#define GX_ETH_REG_0_PHY_INTF BIT(0)
|
||||
#define GX_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
|
||||
#define GX_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
|
||||
#define GX_ETH_REG_0_PHY_CLK_EN BIT(10)
|
||||
#define GX_ETH_REG_0_INVERT_RMII_CLK BIT(11)
|
||||
#define GX_ETH_REG_0_CLK_EN BIT(12)
|
||||
|
||||
/* HIU registers */
|
||||
#define GX_HIU_ADDR(off) (GX_HIU_BASE + ((off) << 2))
|
||||
|
||||
#define GX_MEM_PD_REG_0 GX_HIU_ADDR(0x40)
|
||||
|
||||
/* Ethernet memory power domain */
|
||||
#define GX_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
|
||||
|
||||
/* Clock gates */
|
||||
#define GX_GCLK_MPEG_0 GX_HIU_ADDR(0x50)
|
||||
#define GX_GCLK_MPEG_1 GX_HIU_ADDR(0x51)
|
||||
#define GX_GCLK_MPEG_2 GX_HIU_ADDR(0x52)
|
||||
#define GX_GCLK_MPEG_OTHER GX_HIU_ADDR(0x53)
|
||||
#define GX_GCLK_MPEG_AO GX_HIU_ADDR(0x54)
|
||||
|
||||
#define GX_GCLK_MPEG_0_I2C BIT(9)
|
||||
#define GX_GCLK_MPEG_1_ETH BIT(3)
|
||||
|
||||
#endif /* __GX_H__ */
|
||||
@ -1,69 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
|
||||
*/
|
||||
|
||||
#ifndef __GXBB_H__
|
||||
#define __GXBB_H__
|
||||
|
||||
#define GXBB_FIRMWARE_MEM_SIZE 0x1000000
|
||||
|
||||
#define GXBB_AOBUS_BASE 0xc8100000
|
||||
#define GXBB_PERIPHS_BASE 0xc8834400
|
||||
#define GXBB_HIU_BASE 0xc883c000
|
||||
#define GXBB_ETH_BASE 0xc9410000
|
||||
|
||||
/* Always-On Peripherals registers */
|
||||
#define GXBB_AO_ADDR(off) (GXBB_AOBUS_BASE + ((off) << 2))
|
||||
|
||||
#define GXBB_AO_SEC_GP_CFG0 GXBB_AO_ADDR(0x90)
|
||||
#define GXBB_AO_SEC_GP_CFG3 GXBB_AO_ADDR(0x93)
|
||||
#define GXBB_AO_SEC_GP_CFG4 GXBB_AO_ADDR(0x94)
|
||||
#define GXBB_AO_SEC_GP_CFG5 GXBB_AO_ADDR(0x95)
|
||||
|
||||
#define GXBB_AO_MEM_SIZE_MASK 0xFFFF0000
|
||||
#define GXBB_AO_MEM_SIZE_SHIFT 16
|
||||
#define GXBB_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000
|
||||
#define GXBB_AO_BL31_RSVMEM_SIZE_SHIFT 16
|
||||
#define GXBB_AO_BL32_RSVMEM_SIZE_MASK 0xFFFF
|
||||
|
||||
/* Peripherals registers */
|
||||
#define GXBB_PERIPHS_ADDR(off) (GXBB_PERIPHS_BASE + ((off) << 2))
|
||||
|
||||
/* GPIO registers 0 to 6 */
|
||||
#define _GXBB_GPIO_OFF(n) ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
|
||||
#define GXBB_GPIO_EN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 0)
|
||||
#define GXBB_GPIO_IN(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 1)
|
||||
#define GXBB_GPIO_OUT(n) GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 2)
|
||||
|
||||
#define GXBB_ETH_REG_0 GXBB_PERIPHS_ADDR(0x50)
|
||||
#define GXBB_ETH_REG_1 GXBB_PERIPHS_ADDR(0x51)
|
||||
#define GXBB_ETH_REG_2 GXBB_PERIPHS_ADDR(0x56)
|
||||
#define GXBB_ETH_REG_3 GXBB_PERIPHS_ADDR(0x57)
|
||||
|
||||
#define GXBB_ETH_REG_0_PHY_INTF BIT(0)
|
||||
#define GXBB_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
|
||||
#define GXBB_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
|
||||
#define GXBB_ETH_REG_0_PHY_CLK_EN BIT(10)
|
||||
#define GXBB_ETH_REG_0_INVERT_RMII_CLK BIT(11)
|
||||
#define GXBB_ETH_REG_0_CLK_EN BIT(12)
|
||||
|
||||
/* HIU registers */
|
||||
#define GXBB_HIU_ADDR(off) (GXBB_HIU_BASE + ((off) << 2))
|
||||
|
||||
#define GXBB_MEM_PD_REG_0 GXBB_HIU_ADDR(0x40)
|
||||
|
||||
/* Ethernet memory power domain */
|
||||
#define GXBB_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
|
||||
|
||||
/* Clock gates */
|
||||
#define GXBB_GCLK_MPEG_0 GXBB_HIU_ADDR(0x50)
|
||||
#define GXBB_GCLK_MPEG_1 GXBB_HIU_ADDR(0x51)
|
||||
#define GXBB_GCLK_MPEG_2 GXBB_HIU_ADDR(0x52)
|
||||
#define GXBB_GCLK_MPEG_OTHER GXBB_HIU_ADDR(0x53)
|
||||
#define GXBB_GCLK_MPEG_AO GXBB_HIU_ADDR(0x54)
|
||||
|
||||
#define GXBB_GCLK_MPEG_0_I2C BIT(9)
|
||||
#define GXBB_GCLK_MPEG_1_ETH BIT(3)
|
||||
|
||||
#endif /* __GXBB_H__ */
|
||||
@ -6,7 +6,7 @@
|
||||
#include <common.h>
|
||||
#include <linux/libfdt.h>
|
||||
#include <linux/err.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/armv8/mmu.h>
|
||||
#include <asm/unaligned.h>
|
||||
@ -39,8 +39,8 @@ int dram_init(void)
|
||||
phys_size_t get_effective_memsize(void)
|
||||
{
|
||||
/* Size is reported in MiB, convert it in bytes */
|
||||
return ((readl(GXBB_AO_SEC_GP_CFG0) & GXBB_AO_MEM_SIZE_MASK)
|
||||
>> GXBB_AO_MEM_SIZE_SHIFT) * SZ_1M;
|
||||
return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
|
||||
>> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
|
||||
}
|
||||
|
||||
static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
|
||||
@ -71,27 +71,27 @@ void meson_gx_init_reserved_memory(void *fdt)
|
||||
* - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
|
||||
*/
|
||||
|
||||
reg = readl(GXBB_AO_SEC_GP_CFG3);
|
||||
reg = readl(GX_AO_SEC_GP_CFG3);
|
||||
|
||||
bl31_size = ((reg & GXBB_AO_BL31_RSVMEM_SIZE_MASK)
|
||||
>> GXBB_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
|
||||
bl32_size = (reg & GXBB_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
|
||||
bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
|
||||
>> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
|
||||
bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
|
||||
|
||||
bl31_start = readl(GXBB_AO_SEC_GP_CFG5);
|
||||
bl32_start = readl(GXBB_AO_SEC_GP_CFG4);
|
||||
bl31_start = readl(GX_AO_SEC_GP_CFG5);
|
||||
bl32_start = readl(GX_AO_SEC_GP_CFG4);
|
||||
|
||||
/*
|
||||
* Early Meson GXBB Firmware revisions did not provide the reserved
|
||||
* Early Meson GX Firmware revisions did not provide the reserved
|
||||
* memory zones in the registers, keep fixed memory zone handling.
|
||||
*/
|
||||
if (IS_ENABLED(CONFIG_MESON_GXBB) &&
|
||||
if (IS_ENABLED(CONFIG_MESON_GX) &&
|
||||
!reg && !bl31_start && !bl32_start) {
|
||||
bl31_start = 0x10000000;
|
||||
bl31_size = 0x200000;
|
||||
}
|
||||
|
||||
/* Add first 16MiB reserved zone */
|
||||
meson_board_add_reserved_memory(fdt, 0, GXBB_FIRMWARE_MEM_SIZE);
|
||||
meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
|
||||
|
||||
/* Add BL31 reserved zone */
|
||||
if (bl31_start && bl31_size)
|
||||
@ -107,7 +107,7 @@ void reset_cpu(ulong addr)
|
||||
psci_system_reset();
|
||||
}
|
||||
|
||||
static struct mm_region gxbb_mem_map[] = {
|
||||
static struct mm_region gx_mem_map[] = {
|
||||
{
|
||||
.virt = 0x0UL,
|
||||
.phys = 0x0UL,
|
||||
@ -127,4 +127,4 @@ static struct mm_region gxbb_mem_map[] = {
|
||||
}
|
||||
};
|
||||
|
||||
struct mm_region *mem_map = gxbb_mem_map;
|
||||
struct mm_region *mem_map = gx_mem_map;
|
||||
|
||||
@ -7,7 +7,7 @@
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <asm/arch/eth.h>
|
||||
#include <phy.h>
|
||||
|
||||
@ -22,23 +22,23 @@ void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
|
||||
case PHY_INTERFACE_MODE_RGMII_RXID:
|
||||
case PHY_INTERFACE_MODE_RGMII_TXID:
|
||||
/* Set RGMII mode */
|
||||
setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
|
||||
GXBB_ETH_REG_0_TX_PHASE(1) |
|
||||
GXBB_ETH_REG_0_TX_RATIO(4) |
|
||||
GXBB_ETH_REG_0_PHY_CLK_EN |
|
||||
GXBB_ETH_REG_0_CLK_EN);
|
||||
setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
|
||||
GX_ETH_REG_0_TX_PHASE(1) |
|
||||
GX_ETH_REG_0_TX_RATIO(4) |
|
||||
GX_ETH_REG_0_PHY_CLK_EN |
|
||||
GX_ETH_REG_0_CLK_EN);
|
||||
break;
|
||||
|
||||
case PHY_INTERFACE_MODE_RMII:
|
||||
/* Set RMII mode */
|
||||
out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
|
||||
GXBB_ETH_REG_0_CLK_EN);
|
||||
out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
|
||||
GX_ETH_REG_0_CLK_EN);
|
||||
|
||||
/* Use GXL RMII Internal PHY */
|
||||
if (IS_ENABLED(CONFIG_MESON_GXL) &&
|
||||
(flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) {
|
||||
writel(0x10110181, GXBB_ETH_REG_2);
|
||||
writel(0xe40908ff, GXBB_ETH_REG_3);
|
||||
writel(0x10110181, GX_ETH_REG_2);
|
||||
writel(0xe40908ff, GX_ETH_REG_3);
|
||||
}
|
||||
|
||||
break;
|
||||
@ -49,6 +49,6 @@ void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
|
||||
}
|
||||
|
||||
/* Enable power and clock gate */
|
||||
setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
|
||||
clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
|
||||
setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
|
||||
clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
|
||||
}
|
||||
|
||||
@ -6,7 +6,7 @@
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <linux/kernel.h>
|
||||
|
||||
#define FN_GET_SHARE_MEM_INPUT_BASE 0x82000020
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include <dm.h>
|
||||
#include <environment.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <asm/arch/mem.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/arch/eth.h>
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include <dm.h>
|
||||
#include <environment.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/arch/eth.h>
|
||||
#include <asm/arch/mem.h>
|
||||
@ -33,8 +33,8 @@ int misc_init_r(void)
|
||||
MESON_GXL_USE_INTERNAL_RMII_PHY);
|
||||
|
||||
/* Enable power and clock gate */
|
||||
setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
|
||||
clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
|
||||
setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
|
||||
clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
|
||||
|
||||
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
|
||||
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
|
||||
|
||||
@ -7,7 +7,7 @@
|
||||
#include <dm.h>
|
||||
#include <environment.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/arch/eth.h>
|
||||
#include <asm/arch/mem.h>
|
||||
@ -31,13 +31,13 @@ int misc_init_r(void)
|
||||
meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
|
||||
|
||||
/* Enable power and clock gate */
|
||||
setbits_le32(GXBB_GCLK_MPEG_0, GXBB_GCLK_MPEG_0_I2C);
|
||||
setbits_le32(GX_GCLK_MPEG_0, GX_GCLK_MPEG_0_I2C);
|
||||
|
||||
/* Reset PHY on GPIOZ_14 */
|
||||
clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
|
||||
clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
|
||||
clrbits_le32(GX_GPIO_EN(3), BIT(14));
|
||||
clrbits_le32(GX_GPIO_OUT(3), BIT(14));
|
||||
mdelay(10);
|
||||
setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
|
||||
setbits_le32(GX_GPIO_OUT(3), BIT(14));
|
||||
|
||||
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
|
||||
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
#include <dm.h>
|
||||
#include <environment.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/gxbb.h>
|
||||
#include <asm/arch/gx.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/arch/eth.h>
|
||||
#include <asm/arch/mem.h>
|
||||
|
||||
@ -13,6 +13,6 @@
|
||||
|
||||
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-khadas-vim.dtb\0"
|
||||
|
||||
#include <configs/meson-gxbb-common.h>
|
||||
#include <configs/meson-gx-common.h>
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@ -13,6 +13,6 @@
|
||||
|
||||
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb\0"
|
||||
|
||||
#include <configs/meson-gxbb-common.h>
|
||||
#include <configs/meson-gx-common.h>
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@ -1,11 +1,11 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Configuration for Amlogic Meson GXBB SoCs
|
||||
* Configuration for Amlogic Meson GX SoCs
|
||||
* (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
|
||||
*/
|
||||
|
||||
#ifndef __MESON_GXBB_COMMON_CONFIG_H
|
||||
#define __MESON_GXBB_COMMON_CONFIG_H
|
||||
#ifndef __MESON_GX_COMMON_CONFIG_H
|
||||
#define __MESON_GX_COMMON_CONFIG_H
|
||||
|
||||
#define CONFIG_CPU_ARMV8
|
||||
#define CONFIG_REMAKE_ELF
|
||||
@ -43,4 +43,4 @@
|
||||
|
||||
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */
|
||||
|
||||
#endif /* __MESON_GXBB_COMMON_CONFIG_H */
|
||||
#endif /* __MESON_GX_COMMON_CONFIG_H */
|
||||
@ -13,6 +13,6 @@
|
||||
|
||||
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-odroidc2.dtb\0"
|
||||
|
||||
#include <configs/meson-gxbb-common.h>
|
||||
#include <configs/meson-gx-common.h>
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
@ -15,6 +15,6 @@
|
||||
|
||||
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-p212.dtb\0"
|
||||
|
||||
#include <configs/meson-gxbb-common.h>
|
||||
#include <configs/meson-gx-common.h>
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user