Merge tag 'u-boot-stm32-20210312' of https://source.denx.de/u-boot/custodians/u-boot-stm

- Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
- Remove the nand MTD configuration for NOR boot in stm32mp1 board
- STM32programmer update
- Bsec: manage clock when present in device tree
- stm32mp15: move bootdelay configuration in defconfig
- Update for stm32 dsi and dw_mipi_dsi
- STM32 MCU's cleanup
- Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
- Update stm32mp1 doc

arch/arm/dts/stm32mp151.dtsi

@@ -1136,6 +1136,10 @@
 			reg = <0x50000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+			clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+				 <&clk_lse>, <&clk_lsi>;
 		};
 
 		pwr_regulators: pwr@50001000 {

arch/arm/mach-stm32mp/Kconfig

@@ -121,23 +121,6 @@ config STM32_ETZPC
 	help
 	  Say y to enable STM32 Extended TrustZone Protection
 
-config CMD_STM32PROG
-	bool "command stm32prog for STM32CudeProgrammer"
-	select DFU
-	select DFU_RAM
-	select DFU_VIRT
-	select PARTITION_TYPE_GUID
-	imply CMD_GPT if MMC
-	imply CMD_MTD if MTD
-	imply DFU_MMC if MMC
-	imply DFU_MTD if MTD
-	help
-		activate a specific command stm32prog for STM32MP soc family
-		witch update the device with the tools STM32CubeProgrammer,
-		using UART with STM32 protocol or USB with DFU protocol
-		NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
-		    on U-Boot DFU framework
-
 config CMD_STM32KEY
 	bool "command stm32key to fuse public key hash"
 	default y
@@ -177,6 +160,7 @@ config DEBUG_UART_CLOCK
 	default 64000000
 endif
 
+source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
 source "board/st/stm32mp1/Kconfig"
 source "board/dhelectronics/dh_stm32mp1/Kconfig"
 

arch/arm/mach-stm32mp/Makefile

@@ -11,7 +11,7 @@ obj-y += bsec.o
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 else
-obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog/
+obj-y += cmd_stm32prog/
 obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o
 obj-$(CONFIG_ARMV7_PSCI) += psci.o
 obj-$(CONFIG_TFABOOT) += boot_params.o

arch/arm/mach-stm32mp/bsec.c

@@ -6,6 +6,7 @@
 #define LOG_CATEGORY UCLASS_MISC
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <log.h>
 #include <misc.h>
@@ -490,6 +491,15 @@ static int stm32mp_bsec_probe(struct udevice *dev)
 {
 	int otp;
 	struct stm32mp_bsec_plat *plat;
+	struct clk_bulk clk_bulk;
+	int ret;
+
+	ret = clk_get_bulk(dev, &clk_bulk);
+	if (!ret) {
+		ret = clk_enable_bulk(&clk_bulk);
+		if (ret)
+			return ret;
+	}
 
 	/*
 	 * update unlocked shadow for OTP cleared by the rom code

arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig

@@ -0,0 +1,34 @@
+
+config CMD_STM32PROG
+	bool "command stm32prog for STM32CudeProgrammer"
+	select DFU
+	select DFU_RAM
+	select DFU_VIRT
+	select PARTITION_TYPE_GUID
+	imply CMD_GPT if MMC
+	imply CMD_MTD if MTD
+	imply DFU_MMC if MMC
+	imply DFU_MTD if MTD
+	help
+		activate a specific command stm32prog for STM32MP soc family
+		witch update the device with the tools STM32CubeProgrammer
+		NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
+		    on U-Boot DFU framework
+
+config CMD_STM32PROG_USB
+	bool "support stm32prog over USB"
+	depends on CMD_STM32PROG
+	default y
+	help
+		activate the command "stm32prog usb" for STM32MP soc family
+		witch update the device with the tools STM32CubeProgrammer,
+		using USB with DFU protocol
+
+config CMD_STM32PROG_SERIAL
+	bool "support stm32prog over UART"
+	depends on CMD_STM32PROG
+	default y
+	help
+		activate the command "stm32prog serial" for STM32MP soc family
+		with the tools STM32CubeProgrammer using U-Boot serial device
+		and UART protocol.

arch/arm/mach-stm32mp/cmd_stm32prog/Makefile

@@ -3,7 +3,7 @@
 # Copyright (C) 2020, STMicroelectronics - All Rights Reserved
 #
 
-obj-y += cmd_stm32prog.o
-obj-y += stm32prog.o
-obj-y += stm32prog_serial.o
-obj-y += stm32prog_usb.o
+obj-$(CONFIG_CMD_STM32PROG) += cmd_stm32prog.o
+obj-$(CONFIG_CMD_STM32PROG) += stm32prog.o
+obj-$(CONFIG_CMD_STM32PROG_SERIAL) += stm32prog_serial.o
+obj-$(CONFIG_CMD_STM32PROG_USB) += stm32prog_usb.o

arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c

@@ -50,9 +50,9 @@ static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc,
 	if (argc < 3 ||  argc > 5)
 		return CMD_RET_USAGE;
 
-	if (!strcmp(argv[1], "usb"))
+	if (IS_ENABLED(CONFIG_CMD_STM32PROG_USB) && !strcmp(argv[1], "usb"))
 		link = LINK_USB;
-	else if (!strcmp(argv[1], "serial"))
+	else if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && !strcmp(argv[1], "serial"))
 		link = LINK_SERIAL;
 
 	if (link == LINK_UNDEFINED) {

arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h

@@ -177,9 +177,30 @@ char *stm32prog_get_error(struct stm32prog_data *data);
 
 /* Main function */
 int stm32prog_init(struct stm32prog_data *data, ulong addr, ulong size);
-int stm32prog_serial_init(struct stm32prog_data *data, int link_dev);
-bool stm32prog_serial_loop(struct stm32prog_data *data);
-bool stm32prog_usb_loop(struct stm32prog_data *data, int dev);
 void stm32prog_clean(struct stm32prog_data *data);
 
+#ifdef CONFIG_CMD_STM32PROG_SERIAL
+int stm32prog_serial_init(struct stm32prog_data *data, int link_dev);
+bool stm32prog_serial_loop(struct stm32prog_data *data);
+#else
+static inline int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)
+{
+	return -ENOSYS;
+}
+
+static inline bool stm32prog_serial_loop(struct stm32prog_data *data)
+{
+	return false;
+}
+#endif
+
+#ifdef CONFIG_CMD_STM32PROG_USB
+bool stm32prog_usb_loop(struct stm32prog_data *data, int dev);
+#else
+static inline bool stm32prog_usb_loop(struct stm32prog_data *data, int dev)
+{
+	return false;
+}
+#endif
+
 #endif

arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c

@@ -187,36 +187,19 @@ static int stm32prog_read(struct stm32prog_data *data, u8 phase, u32 offset,
 int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)
 {
 	struct udevice *dev = NULL;
-	int node;
-	char alias[10];
-	const char *path;
 	struct dm_serial_ops *ops;
 	/* no parity, 8 bits, 1 stop */
 	u32 serial_config = SERIAL_DEFAULT_CONFIG;
 
 	down_serial_dev = NULL;
 
-	sprintf(alias, "serial%d", link_dev);
-	path = fdt_get_alias(gd->fdt_blob, alias);
-	if (!path) {
-		log_err("%s alias not found", alias);
-		return -ENODEV;
-	}
-	node = fdt_path_offset(gd->fdt_blob, path);
-	if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node,
-					    &dev)) {
-		down_serial_dev = dev;
-	} else if (node > 0 &&
-		   !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node),
-				   &dev, false)) {
-		if (!device_probe(dev))
-			down_serial_dev = dev;
-	}
-	if (!down_serial_dev) {
-		log_err("%s = %s device not found", alias, path);
+	if (uclass_get_device_by_seq(UCLASS_SERIAL, link_dev, &dev)) {
+		log_err("serial %d device not found\n", link_dev);
 		return -ENODEV;
 	}
 
+	down_serial_dev = dev;
+
 	/* force silent console on uart only when used */
 	if (gd->cur_serial_dev == down_serial_dev)
 		gd->flags |= GD_FLG_DISABLE_CONSOLE | GD_FLG_SILENT;
@@ -226,11 +209,11 @@ int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)
 	ops = serial_get_ops(down_serial_dev);
 
 	if (!ops) {
-		log_err("%s = %s missing ops", alias, path);
+		log_err("serial %d = %s missing ops\n", link_dev, dev->name);
 		return -ENODEV;
 	}
 	if (!ops->setconfig) {
-		log_err("%s = %s missing setconfig", alias, path);
+		log_err("serial %d = %s missing setconfig\n", link_dev, dev->name);
 		return -ENODEV;
 	}
 

arch/arm/mach-stm32mp/cpu.c

@@ -223,8 +223,10 @@ static void early_enable_caches(void)
 	if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
 		return;
 
-	gd->arch.tlb_size = PGTABLE_SIZE;
-	gd->arch.tlb_addr = (unsigned long)&early_tlb;
+	if (!(CONFIG_IS_ENABLED(SYS_ICACHE_OFF) && CONFIG_IS_ENABLED(SYS_DCACHE_OFF))) {
+		gd->arch.tlb_size = PGTABLE_SIZE;
+		gd->arch.tlb_addr = (unsigned long)&early_tlb;
+	}
 
 	dcache_enable();
 
@@ -265,7 +267,8 @@ int arch_cpu_init(void)
 
 	boot_mode = get_bootmode();
 
-	if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
+	if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) &&
+	    (boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
 		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
 #if defined(CONFIG_DEBUG_UART) && \
 	!defined(CONFIG_TFABOOT) && \
@@ -465,7 +468,6 @@ static void setup_boot_mode(void)
 	unsigned int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1;
 	u32 forced_mode = (boot_ctx & TAMP_BOOT_FORCED_MASK);
 	struct udevice *dev;
-	int alias;
 
 	log_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n",
 		  __func__, boot_ctx, boot_mode, instance, forced_mode);
@@ -473,19 +475,23 @@ static void setup_boot_mode(void)
 	case BOOT_SERIAL_UART:
 		if (instance > ARRAY_SIZE(serial_addr))
 			break;
-		/* serial : search associated alias in devicetree */
+		/* serial : search associated node in devicetree */
 		sprintf(cmd, "serial@%x", serial_addr[instance]);
-		if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev))
+		if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev)) {
+			/* restore console on error */
+			if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL))
+				gd->flags &= ~(GD_FLG_SILENT |
+					       GD_FLG_DISABLE_CONSOLE);
+			printf("uart%d = %s not found in device tree!\n",
+			       instance, cmd);
 			break;
-		if (fdtdec_get_alias_seq(gd->fdt_blob, "serial",
-					 dev_of_offset(dev), &alias))
-			break;
-		sprintf(cmd, "%d", alias);
+		}
+		sprintf(cmd, "%d", dev_seq(dev));
 		env_set("boot_device", "serial");
 		env_set("boot_instance", cmd);
 
 		/* restore console on uart when not used */
-		if (gd->cur_serial_dev != dev) {
+		if (IS_ENABLED(CONFIG_CMD_STM32PROG_SERIAL) && gd->cur_serial_dev != dev) {
 			gd->flags &= ~(GD_FLG_SILENT |
 				       GD_FLG_DISABLE_CONSOLE);
 			printf("serial boot with console enabled!\n");