leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ks2_evm: Add EEPROM based board detection

Browse Source 
Some K2G evms have their EEPROM programming while most do not. Therefore,
add EEPROM board detection to be used as the default method and fall back
to the alternative board detection when needed.

Also reorder board configuration. Perform bare minimal configuration
initially since board detection hasn't ran. Finish board configuration
once the board has been identified.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Cooper Jr., Franklin 2017-06-16 17:25:17 -05:00 committed by Tom Rini
parent 7234f215cc
commit e820f523d8
2 changed files with 24 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
board/ti/ks2_evm/board.h
View File

@ -11,6 +11,7 @@
#define _KS2_BOARD
#include <asm/ti-common/keystone_net.h>
#include "../common/board_detect.h"
extern struct eth_priv_t eth_priv_cfg[];

44
board/ti/ks2_evm/board_k2g.c
View File

@ -246,24 +246,6 @@ static int k2g_alt_board_detect(void)
return 0;
}
int embedded_dtb_select(void)
{
int rc;
rc = k2g_alt_board_detect();
if (rc) {
printf("Unable to do board detection\n");
return -1;
}
fdtdec_setup();
return 0;
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
static void k2g_reset_mux_config(void)
{
/* Unlock the reset mux register */
@ -277,11 +259,20 @@ static void k2g_reset_mux_config(void)
setbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK);
}
int board_early_init_f(void)
int embedded_dtb_select(void)
{
init_plls();
int rc;
rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
CONFIG_EEPROM_CHIP_ADDRESS);
if (rc) {
rc = k2g_alt_board_detect();
if (rc) {
printf("Unable to do board detection\n");
return -1;
}
}
k2g_mux_config();
fdtdec_setup();
k2g_reset_mux_config();
@ -313,6 +304,17 @@ int board_late_init(void)
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
init_plls();
k2g_mux_config();
return 0;
}
#endif
#ifdef CONFIG_SPL_BUILD
void spl_init_keystone_plls(void)
{