Convert CONFIG_SYS_MONITOR_BASE to Kconfig

This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_BASE

Note that for how this is re-used on some PowePC platforms, we introduce
CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the
CONFIG_VAL macro to get the correct value at build time, in the code.

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2022-03-24 17:18:05 -04:00
parent d4a2c400d1
commit e4d741f8ab
182 changed files with 118 additions and 314 deletions

6
README
View File

@ -1917,12 +1917,6 @@ Configuration Settings:
- CONFIG_SYS_FLASH_BASE:
Physical start address of Flash memory.
- CONFIG_SYS_MONITOR_BASE:
Physical start address of boot monitor code (set by
make config files to be same as the text base address
(CONFIG_SYS_TEXT_BASE) used when linking) - same as
CONFIG_SYS_FLASH_BASE when booting from flash.
- CONFIG_SYS_MONITOR_LEN:
Size of memory reserved for monitor code, used to
determine _at_compile_time_ (!) if the environment is

View File

@ -247,7 +247,7 @@ l2_disabled:
/* Interrupt vectors do not fit in minimal SPL. */
#if !defined(MINIMAL_SPL)
/* Setup interrupt vectors */
lis r1,CONFIG_SYS_MONITOR_BASE@h
lis r1,CONFIG_VAL(SYS_MONITOR_BASE)@h
mtspr IVPR,r1
li r4,CriticalInput@l
@ -450,7 +450,7 @@ nexti: mflr r1 /* R1 = our PC */
*/
create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
0, BOOKE_PAGESZ_4M, \
CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xffc00000, MAS2_I|MAS2_G, \
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
@ -461,8 +461,8 @@ nexti: mflr r1 /* R1 = our PC */
*/
create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
0, BOOKE_PAGESZ_256K, \
CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \
CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xfffc0000, MAS2_I, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#endif
#endif
@ -1027,7 +1027,7 @@ create_init_ram_area:
/* create a temp mapping in AS=1 to the 4M boot window */
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_4M, \
CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xffc00000, MAS2_I|MAS2_G, \
0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
@ -1037,7 +1037,7 @@ create_init_ram_area:
*/
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
@ -1048,24 +1048,24 @@ create_init_ram_area:
*/
#elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_NXP_ESBC) && \
(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
/* create a temp mapping in AS = 1 for mapping CONFIG_SYS_MONITOR_BASE
/* create a temp mapping in AS = 1 for mapping CONFIG_VAL(SYS_MONITOR_BASE)
* to L3 Address configured by PBL for ISBC code
*/
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#else
/*
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
* image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
* create a temp mapping in AS=1 to the 1M CONFIG_VAL(SYS_MONITOR_BASE) space, the main
* image has been relocated to CONFIG_VAL(SYS_MONITOR_BASE) on the second stage.
*/
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#endif
@ -1126,8 +1126,8 @@ switch_as:
#else
/* Calculate absolute address in FLASH and jump there */
/*--------------------------------------------------------------*/
lis r3,CONFIG_SYS_MONITOR_BASE@h
ori r3,r3,CONFIG_SYS_MONITOR_BASE@l
lis r3,CONFIG_VAL(SYS_MONITOR_BASE)@h
ori r3,r3,CONFIG_VAL(SYS_MONITOR_BASE)@l
addi r3,r3,_start_cont - _start
mtlr r3
blr
@ -1530,8 +1530,8 @@ relocate_code:
GET_GOT
#ifndef CONFIG_SPL_SKIP_RELOCATE
mr r3,r5 /* Destination Address */
lis r4,CONFIG_SYS_MONITOR_BASE@h /* Source Address */
ori r4,r4,CONFIG_SYS_MONITOR_BASE@l
lis r4,CONFIG_VAL(SYS_MONITOR_BASE)@h /* Source Address */
ori r4,r4,CONFIG_VAL(SYS_MONITOR_BASE)@l
lwz r5,GOT(__init_end)
sub r5,r5,r4
li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
@ -1539,7 +1539,7 @@ relocate_code:
/*
* Fix GOT pointer:
*
* New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
* New GOT-PTR = (old GOT-PTR - CONFIG_VAL(SYS_MONITOR_BASE)) + Destination Address
*
* Offset:
*/

View File

@ -370,6 +370,31 @@ config SYS_TEXT_BASE
help
The address in memory that U-Boot will be running from, initially.
config HAVE_SYS_MONITOR_BASE
bool
depends on ARC || MIPS || M68K || NIOS2 || PPC || XTENSA || X86 \
|| FLASH_PIC32 || ENV_IS_IN_FLASH || MTD_NOR_FLASH
depends on !EFI_APP
default y
config SYS_MONITOR_BASE
depends on HAVE_SYS_MONITOR_BASE
hex "Physical start address of boot monitor code"
default SYS_TEXT_BASE
help
The physical start address of boot monitor code (which is the same as
CONFIG_SYS_TEXT_BASE when linking) and the same as CONFIG_SYS_FLASH_BASE
when booting from flash.
config SPL_SYS_MONITOR_BASE
depends on MPC85xx && SPL && HAVE_SYS_MONITOR_BASE
hex "Physical start address of SPL monitor code"
default SPL_TEXT_BASE
config TPL_SYS_MONITOR_BASE
depends on MPC85xx && TPL && HAVE_SYS_MONITOR_BASE
hex "Physical start address of TPL monitor code"
config DYNAMIC_SYS_CLK_FREQ
bool "Determine CPU clock frequency at run-time"
help

View File

@ -8,6 +8,7 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard"
CONFIG_SYS_LOAD_ADDR=0xcc000000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0xCFF80000
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y

View File

@ -8,6 +8,7 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
CONFIG_SYS_LOAD_ADDR=0xd4000000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0xD7F80000
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5208EVBE"
CONFIG_TARGET_M5208EVBE=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -8,6 +8,7 @@ CONFIG_TARGET_M5235EVB=y
CONFIG_NORFLASH_PS32BIT=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_MONITOR_BASE=0xFFC00400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5235EVB"
CONFIG_TARGET_M5235EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5249EVB"
CONFIG_TARGET_M5249EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x200000
CONFIG_SYS_MONITOR_BASE=0xFFE00400
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SYS_DEVICE_NULLDEV=y

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5253DEMO"
CONFIG_TARGET_M5253DEMO=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_SYS_MONITOR_BASE=0xFF800400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5272C3"
CONFIG_TARGET_M5272C3=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5275EVB"
CONFIG_TARGET_M5275EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="bootm ffe40000"

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5282EVB"
CONFIG_TARGET_M5282EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M53017EVB"
CONFIG_TARGET_M53017EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock3 rw rootfstype=jffs2"

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5329AFEE"
CONFIG_TARGET_M5329EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5329BFEE"
CONFIG_TARGET_M5329EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="M5373EVB"
CONFIG_TARGET_M5373EVB=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -18,6 +18,7 @@ CONFIG_SYS_SCCR_MASK=0x60000000
CONFIG_SYS_DER=0x2002000F
CONFIG_SYS_LOAD_ADDR=0x200000
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_MONITOR_BASE=0x04000000
CONFIG_BOOTDELAY=5
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="\nEnter password - autoboot in %d sec...\n"

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"

View File

@ -19,6 +19,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"

View File

@ -19,6 +19,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xD0001000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"

View File

@ -21,6 +21,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -19,6 +19,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -21,6 +21,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -18,6 +18,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -18,6 +18,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y

View File

@ -21,6 +21,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -19,6 +19,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -21,6 +21,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_TPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -18,6 +18,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"

View File

@ -20,6 +20,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL_SYS_MONITOR_BASE=0xF8F81000
CONFIG_SPIFLASH=y
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTCOMMAND=y

View File

@ -11,6 +11,7 @@ CONFIG_SYS_CLK_FREQ=39062500
CONFIG_TARGET_ADP_AE3XX=y
CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="NDS32 # "

View File

@ -10,6 +10,7 @@ CONFIG_SYS_CLK_FREQ=39062500
CONFIG_TARGET_ADP_AG101P=y
CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x80000000
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SYS_PROMPT="NDS32 # "

View File

@ -8,6 +8,7 @@ CONFIG_TARGET_AX25_AE350=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -12,6 +12,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -14,6 +14,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -9,6 +9,7 @@ CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -9,6 +9,7 @@ CONFIG_ARCH_RV64I=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -13,6 +13,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -15,6 +15,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -10,6 +10,7 @@ CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="RISC-V # "

View File

@ -8,6 +8,7 @@ CONFIG_DEFAULT_DEVICE_TREE="amcore"
CONFIG_TARGET_AMCORE=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_MONITOR_BASE=0xFFC00400
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="bootm ffc20000"

View File

@ -13,6 +13,7 @@ CONFIG_R8A7740=y
CONFIG_TARGET_ARMADILLO_800EVA=y
CONFIG_SYS_CLK_FREQ=50000000
CONFIG_SYS_LOAD_ADDR=0x44000000
CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_BOOTDELAY=3
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="astro_mcf5373l"
CONFIG_TARGET_ASTRO_MCF5373L=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_MONITOR_BASE=0x00000400
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS=" console=ttyS2,115200 rootfstype=romfs loaderversion=$loaderversion"

View File

@ -17,6 +17,7 @@ CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set

View File

@ -18,6 +18,7 @@ CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set

View File

@ -22,6 +22,7 @@ CONFIG_X86_OFFSET_U_BOOT=0xffd00000
CONFIG_X86_OFFSET_SPL=0xffe80000
CONFIG_INTEL_ACPIGEN=y
CONFIG_INTEL_GENERIC_WIFI=y
CONFIG_SYS_MONITOR_BASE=0x01110000
CONFIG_CHROMEOS=y
CONFIG_BOOTSTAGE=y
CONFIG_SPL_BOOTSTAGE=y

View File

@ -20,6 +20,7 @@ CONFIG_HAVE_REFCODE=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_X86_OFFSET_U_BOOT=0xffee0000
CONFIG_SYS_MONITOR_BASE=0xFFED0000
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="cobra5272"
CONFIG_TARGET_COBRA5272=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_MONITOR_BASE=0xFFE00400
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set

View File

@ -11,6 +11,7 @@ CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_LOAD_ADDR=0xa0000000
CONFIG_TIMESTAMP=y
CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
CONFIG_USE_BOOTCOMMAND=y

View File

@ -10,6 +10,7 @@ CONFIG_VENDOR_COREBOOT=y
CONFIG_TARGET_COREBOOT=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_MONITOR_BASE=0x01120000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"

View File

@ -8,6 +8,7 @@ CONFIG_VENDOR_COREBOOT=y
CONFIG_TARGET_COREBOOT=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SYS_MONITOR_BASE=0x01110000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"

View File

@ -6,7 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282"
CONFIG_TARGET_EB_CPU5282=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xFF000400"
CONFIG_SYS_MONITOR_BASE=0xFF000400
CONFIG_BOOTDELAY=5
CONFIG_BOOT_RETRY=y
CONFIG_BOOT_RETRY_TIME=-1

View File

@ -6,7 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282_internal"
CONFIG_TARGET_EB_CPU5282=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418"
CONFIG_SYS_MONITOR_BASE=0xF0000418
CONFIG_BOOTDELAY=5
CONFIG_BOOT_RETRY=y
CONFIG_BOOT_RETRY_TIME=-1

View File

@ -10,6 +10,7 @@ CONFIG_VENDOR_INTEL=y
CONFIG_TARGET_EDISON=y
CONFIG_SMP=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_SYS_MONITOR_BASE=0x01101000
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y

View File

@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y

View File

@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y

View File

@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y

View File

@ -8,6 +8,7 @@ CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_SYS_MONITOR_BASE=0x27F40000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
CONFIG_USE_BOOTCOMMAND=y

View File

@ -16,6 +16,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_MONITOR_BASE=0xEBF40000
CONFIG_EVENT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y

View File

@ -15,6 +15,7 @@ CONFIG_SPL=y
CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTCOMMAND="run autoboot"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv preboot;saveenv;"

View File

@ -15,6 +15,7 @@ CONFIG_SPL=y
CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_SYS_MONITOR_BASE=0x10000000
CONFIG_BOOTCOMMAND="run autoboot"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv preboot;saveenv;"

View File

@ -9,6 +9,7 @@ CONFIG_TARGET_QEMU_PPCE500=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_MONITOR_BASE=0x00F01000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr"

View File

@ -20,6 +20,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_SYS_MONITOR_BASE=0x01110000
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y

View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sh7751-r2dplus"
CONFIG_SYS_CLK_FREQ=60000000
CONFIG_TARGET_R2DPLUS=y
CONFIG_SYS_LOAD_ADDR=0x8e000000
CONFIG_SYS_MONITOR_BASE=0xA0000000
CONFIG_BOOTDELAY=-1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC0,115200"

View File

@ -15,6 +15,7 @@ CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77990-ebisu.dtb; booti 0x48080000 - 0x48000000"

View File

@ -15,6 +15,7 @@ CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77995-draak.dtb; booti 0x48080000 - 0x48000000"

View File

@ -13,6 +13,7 @@ CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-salvator-x.dtb; booti 0x48080000 - 0x48000000"

View File

@ -15,6 +15,7 @@ CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_MONITOR_BASE=0x00000000
CONFIG_USE_BOOTARGS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="tftp 0x48080000 Image; tftp 0x48000000 Image-r8a77950-ulcb.dtb; booti 0x48080000 - 0x48000000"

View File

@ -10,6 +10,7 @@ CONFIG_TARGET_SOCRATES=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_MONITOR_BASE=0xFFF80000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run boot_nor"

View File

@ -9,6 +9,7 @@ CONFIG_TARGET_STMARK2=y
CONFIG_MCFTMR=y
CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_TIMESTAMP=y
CONFIG_SYS_MONITOR_BASE=0x47E00400
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/bin/init devtmpfs.mount=1"
CONFIG_USE_BOOTCOMMAND=y

View File

@ -9,6 +9,7 @@ CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="vexpress-v2p-ca9"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x90000000
CONFIG_SYS_MONITOR_BASE=0x40000000
CONFIG_BOOTCOMMAND="run distro_bootcmd; run bootflash"
CONFIG_DEFAULT_FDT_FILE="vexpress-v2p-ca9.dtb"
# CONFIG_DISPLAY_CPUINFO is not set

View File

@ -5,6 +5,7 @@ CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_XTFPGA_KC705=y
CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_SYS_MONITOR_BASE=0xF6000000
CONFIG_DYNAMIC_SYS_CLK_FREQ=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_BOOTDELAY=10

View File

@ -36,8 +36,5 @@
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
CONFIG_SYS_SDRAM_SIZE - \
CONFIG_SYS_MONITOR_LEN)
#endif /* __CONFIG_H */

View File

@ -32,8 +32,5 @@
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
#define CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \
CONFIG_SYS_SDRAM_SIZE - \
CONFIG_SYS_MONITOR_LEN)
#endif /* __CONFIG_H */

View File

@ -81,7 +81,6 @@
#define CONFIG_SYS_SDRAM_EMOD 0x80010000
#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -86,7 +86,6 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -64,8 +64,6 @@
#define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
#endif
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -91,12 +91,6 @@
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
#ifdef CONFIG_MONITOR_IS_IN_RAM
# define CONFIG_SYS_MONITOR_BASE 0x20000
#else
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
#define CONFIG_SYS_MONITOR_LEN 0x40000
#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)

View File

@ -88,12 +88,6 @@
#define CONFIG_SYS_SDRAM_SIZE 4 /* SDRAM size in MB */
#define CONFIG_SYS_FLASH_BASE 0xffe00000
#ifdef CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_BASE 0x20000
#else
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -90,12 +90,6 @@
#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
#ifdef CONFIG_MONITOR_IS_IN_RAM
#define CONFIG_SYS_MONITOR_BASE 0x20000
#else
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -91,14 +91,6 @@
#define CONFIG_SYS_INT_FLASH_BASE 0xf0000000
#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#else
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
#endif
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -95,7 +95,6 @@
#define CONFIG_SYS_SDRAM_EMOD 0x80010000
#define CONFIG_SYS_SDRAM_MODE 0x00CD0000
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -91,7 +91,6 @@
#define CONFIG_SYS_SDRAM_EMOD 0x40010000
#define CONFIG_SYS_SDRAM_MODE 0x018D0000
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -93,7 +93,6 @@
#define CONFIG_SYS_SDRAM_EMOD 0x40010000
#define CONFIG_SYS_SDRAM_MODE 0x018D0000
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024

View File

@ -80,7 +80,6 @@
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
#define CONFIG_SYS_MONITOR_LEN (320 << 10)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* Environment Configuration */

View File

@ -126,7 +126,6 @@
/*
* The reserved memory
*/
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT

View File

@ -136,8 +136,6 @@
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_HWCONFIG /* enable hwconfig */

View File

@ -97,14 +97,6 @@
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
#endif
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SYS_MONITOR_BASE 0xD0001000
#elif defined(CONFIG_SPL_BUILD)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
/* High Level Configuration Options */
#if defined(CONFIG_PCI)

View File

@ -143,8 +143,6 @@
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif

View File

@ -311,12 +311,6 @@
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
#endif
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#endif
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif

View File

@ -296,12 +296,6 @@
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
#endif
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
#if defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_SYS_RAMBOOT
#endif

View File

@ -296,12 +296,6 @@
#define CONFIG_SYS_RAMBOOT
#endif
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */

View File

@ -254,12 +254,6 @@
#define CONFIG_SYS_RAMBOOT
#endif
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
#define CONFIG_HWCONFIG
/* define to use L1 as initial stack */

Some files were not shown because too many files have changed in this diff Show More