riscv: qemu: add SPL configuration

Add two new configurations (qemu-riscv{32,64}_spl_defconfig) with SPL
enabled for RISC-V QEMU. QEMU does not require SPL to run U-Boot. The
configurations are meant to help the development of SPL on RISC-V.

The configurations enable RAM as the only SPL boot device. Images must
be loaded at address 0x80200000. In the default boot flow, U-Boot SPL
starts in machine mode, loads the OpenSBI FW_DYNAMIC firmware and U-Boot
proper from the supplied FIT image, and starts OpenSBI. U-Boot proper is
then started in supervisor mode by OpenSBI.

Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>

board/emulation/qemu-riscv/Kconfig

@@ -13,13 +13,21 @@ config SYS_CONFIG_NAME
 	default "qemu-riscv"
 
 config SYS_TEXT_BASE
+	default 0x81200000 if SPL
 	default 0x80000000 if !RISCV_SMODE
 	default 0x80200000 if RISCV_SMODE && ARCH_RV64I
 	default 0x80400000 if RISCV_SMODE && ARCH_RV32I
 
+config SPL_TEXT_BASE
+	default 0x80000000
+
+config SPL_OPENSBI_LOAD_ADDR
+	default 0x81000000
+
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select GENERIC_RISCV
+	select SUPPORT_SPL
 	imply SYS_NS16550
 	imply VIRTIO_MMIO
 	imply VIRTIO_NET
@@ -43,5 +51,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	imply CMD_PCI
 	imply E1000
 	imply NVME
+	imply SPL_RAM_SUPPORT
+	imply SPL_RAM_DEVICE
 
 endif

board/emulation/qemu-riscv/MAINTAINERS

@@ -5,5 +5,7 @@ F:	board/emulation/qemu-riscv/
 F:	include/configs/qemu-riscv.h
 F:	configs/qemu-riscv32_defconfig
 F:	configs/qemu-riscv32_smode_defconfig
+F:	configs/qemu-riscv32_spl_defconfig
 F:	configs/qemu-riscv64_defconfig
 F:	configs/qemu-riscv64_smode_defconfig
+F:	configs/qemu-riscv64_spl_defconfig

board/emulation/qemu-riscv/qemu-riscv.c

@@ -7,6 +7,7 @@
 #include <dm.h>
 #include <env.h>
 #include <fdtdec.h>
+#include <spl.h>
 #include <virtio_types.h>
 #include <virtio.h>
 
@@ -88,3 +89,19 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	return 0;
 }
+
+#ifdef CONFIG_SPL
+u32 spl_boot_device(void)
+{
+	/* RISC-V QEMU only supports RAM as SPL boot device */
+	return BOOT_DEVICE_RAM;
+}
+#endif
+
+#ifdef CONFIG_SPL_LOAD_FIT
+int board_fit_config_name_match(const char *name)
+{
+	/* boot using first FIT config */
+	return 0;
+}
+#endif