xpedite1k: Cleanup coding style
Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Peter Tyser
Stefan Roese
parent
086ff34a3a
commit
e02990764c
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
|
||||
* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
@ -24,62 +24,59 @@
|
||||
#include <config.h>
|
||||
|
||||
/* General */
|
||||
#define TLB_VALID 0x00000200
|
||||
#define TLB_VALID 0x00000200
|
||||
|
||||
/* Supported page sizes */
|
||||
|
||||
#define SZ_1K 0x00000000
|
||||
#define SZ_4K 0x00000010
|
||||
#define SZ_16K 0x00000020
|
||||
#define SZ_64K 0x00000030
|
||||
#define SZ_256K 0x00000040
|
||||
#define SZ_1M 0x00000050
|
||||
#define SZ_16M 0x00000070
|
||||
#define SZ_256M 0x00000090
|
||||
#define SZ_1K 0x00000000
|
||||
#define SZ_4K 0x00000010
|
||||
#define SZ_16K 0x00000020
|
||||
#define SZ_64K 0x00000030
|
||||
#define SZ_256K 0x00000040
|
||||
#define SZ_1M 0x00000050
|
||||
#define SZ_16M 0x00000070
|
||||
#define SZ_256M 0x00000090
|
||||
|
||||
/* Storage attributes */
|
||||
#define SA_W 0x00000800 /* Write-through */
|
||||
#define SA_I 0x00000400 /* Caching inhibited */
|
||||
#define SA_M 0x00000200 /* Memory coherence */
|
||||
#define SA_G 0x00000100 /* Guarded */
|
||||
#define SA_E 0x00000080 /* Endian */
|
||||
#define SA_W 0x00000800 /* Write-through */
|
||||
#define SA_I 0x00000400 /* Caching inhibited */
|
||||
#define SA_M 0x00000200 /* Memory coherence */
|
||||
#define SA_G 0x00000100 /* Guarded */
|
||||
#define SA_E 0x00000080 /* Endian */
|
||||
|
||||
/* Access control */
|
||||
#define AC_X 0x00000024 /* Execute */
|
||||
#define AC_W 0x00000012 /* Write */
|
||||
#define AC_R 0x00000009 /* Read */
|
||||
#define AC_X 0x00000024 /* Execute */
|
||||
#define AC_W 0x00000012 /* Write */
|
||||
#define AC_R 0x00000009 /* Read */
|
||||
|
||||
/* Some handy macros */
|
||||
|
||||
#define EPN(e) ((e) & 0xfffffc00)
|
||||
#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
|
||||
#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
|
||||
#define TLB2(a) ( (a)&0x00000fbf )
|
||||
#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
|
||||
#define TLB1(rpn,erpn) (((rpn)&0xfffffc00) | (erpn))
|
||||
#define TLB2(a) ((a)&0x00000fbf)
|
||||
|
||||
#define tlbtab_start\
|
||||
mflr r1 ;\
|
||||
bl 0f ;
|
||||
#define tlbtab_start \
|
||||
mflr r1; \
|
||||
bl 0f;
|
||||
|
||||
#define tlbtab_end\
|
||||
.long 0, 0, 0 ; \
|
||||
0: mflr r0 ; \
|
||||
mtlr r1 ; \
|
||||
blr ;
|
||||
#define tlbtab_end \
|
||||
.long 0, 0, 0; \
|
||||
0: mflr r0; \
|
||||
mtlr r1; \
|
||||
blr;
|
||||
|
||||
#define tlbentry(epn,sz,rpn,erpn,attr)\
|
||||
.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
|
||||
|
||||
|
||||
/**************************************************************************
|
||||
/*
|
||||
* TLB TABLE
|
||||
*
|
||||
* This table is used by the cpu boot code to setup the initial tlb
|
||||
* entries. Rather than make broad assumptions in the cpu source tree,
|
||||
* this table lets each board set things up however they like.
|
||||
*
|
||||
* Pointer to the table is returned in r1
|
||||
*
|
||||
*************************************************************************/
|
||||
* Pointer to the table is returned in r1
|
||||
*/
|
||||
|
||||
.section .bootpg,"ax"
|
||||
.globl tlbtab
|
||||
|
||||
@ -78,9 +78,6 @@ SECTIONS
|
||||
lib_ppc/extable.o (.text)
|
||||
lib_generic/zlib.o (.text)
|
||||
|
||||
/* . = env_offset;*/
|
||||
/* common/env_embedded.o(.text)*/
|
||||
|
||||
*(.text)
|
||||
*(.fixup)
|
||||
*(.got1)
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
|
||||
* Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
|
||||
*
|
||||
* See file CREDITS for list of people who contributed to this
|
||||
* project.
|
||||
@ -11,7 +11,7 @@
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
@ -20,7 +20,6 @@
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/processor.h>
|
||||
#include <spd_sdram.h>
|
||||
@ -32,7 +31,8 @@ DECLARE_GLOBAL_DATA_PTR;
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
unsigned long sdrreg;
|
||||
/* TBS: Setup the GPIO access for the user LEDs */
|
||||
|
||||
/* TBS: Setup the GPIO access for the user LEDs */
|
||||
mfsdr(sdr_pfc0, sdrreg);
|
||||
mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00);
|
||||
out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
|
||||
@ -41,18 +41,15 @@ int board_early_init_f(void)
|
||||
LED2_OFF();
|
||||
LED3_OFF();
|
||||
|
||||
/*--------------------------------------------------------------------
|
||||
* Setup the external bus controller/chip selects
|
||||
*-------------------------------------------------------------------*/
|
||||
mtebc (pb0ap, 0x04055200); /* 16MB Strata FLASH */
|
||||
mtebc (pb0cr, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */
|
||||
mtebc (pb1ap, 0x04055200); /* 512KB Socketed AMD FLASH */
|
||||
mtebc (pb1cr, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */
|
||||
/* Setup the external bus controller/chip selects */
|
||||
mtebc(pb0ap, 0x04055200); /* 16MB Strata FLASH */
|
||||
mtebc(pb0cr, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */
|
||||
mtebc(pb1ap, 0x04055200); /* 512KB Socketed AMD FLASH */
|
||||
mtebc(pb1cr, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */
|
||||
|
||||
/*--------------------------------------------------------------------
|
||||
* Setup the interrupt controller polarities, triggers, etc.
|
||||
*-------------------------------------------------------------------*/
|
||||
/*
|
||||
* Setup the interrupt controller polarities, triggers, etc.
|
||||
*
|
||||
* Because of the interrupt handling rework to handle 440GX interrupts
|
||||
* with the common code, we needed to change names of the UIC registers.
|
||||
* Here the new relationship:
|
||||
@ -64,78 +61,73 @@ int board_early_init_f(void)
|
||||
* UIC2 UIC1
|
||||
* UIC3 UIC2
|
||||
*/
|
||||
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
||||
mtdcr (uic1er, 0x00000000); /* disable all */
|
||||
mtdcr (uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */
|
||||
mtdcr (uic1pr, 0xfffffe00); /* per ref-board manual */
|
||||
mtdcr (uic1tr, 0x01c00000); /* per ref-board manual */
|
||||
mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
|
||||
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
||||
mtdcr(uic1sr, 0xffffffff); /* clear all */
|
||||
mtdcr(uic1er, 0x00000000); /* disable all */
|
||||
mtdcr(uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */
|
||||
mtdcr(uic1pr, 0xfffffe00); /* per ref-board manual */
|
||||
mtdcr(uic1tr, 0x01c00000); /* per ref-board manual */
|
||||
mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
|
||||
mtdcr(uic1sr, 0xffffffff); /* clear all */
|
||||
|
||||
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
||||
mtdcr (uic2er, 0x00000000); /* disable all */
|
||||
mtdcr (uic2cr, 0x00000000); /* all non-critical */
|
||||
mtdcr (uic2pr, 0xffffc0ff); /* per ref-board manual */
|
||||
mtdcr (uic2tr, 0x00ff8000); /* per ref-board manual */
|
||||
mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
|
||||
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
||||
mtdcr(uic2sr, 0xffffffff); /* clear all */
|
||||
mtdcr(uic2er, 0x00000000); /* disable all */
|
||||
mtdcr(uic2cr, 0x00000000); /* all non-critical */
|
||||
mtdcr(uic2pr, 0xffffc0ff); /* per ref-board manual */
|
||||
mtdcr(uic2tr, 0x00ff8000); /* per ref-board manual */
|
||||
mtdcr(uic2vr, 0x00000001); /* int31 highest, base=0x000 */
|
||||
mtdcr(uic2sr, 0xffffffff); /* clear all */
|
||||
|
||||
mtdcr (uic3sr, 0xffffffff); /* clear all */
|
||||
mtdcr (uic3er, 0x00000000); /* disable all */
|
||||
mtdcr (uic3cr, 0x00000000); /* all non-critical */
|
||||
mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
|
||||
mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
|
||||
mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
|
||||
mtdcr (uic3sr, 0xffffffff); /* clear all */
|
||||
mtdcr(uic3sr, 0xffffffff); /* clear all */
|
||||
mtdcr(uic3er, 0x00000000); /* disable all */
|
||||
mtdcr(uic3cr, 0x00000000); /* all non-critical */
|
||||
mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */
|
||||
mtdcr(uic3tr, 0x00ff8c0f); /* per ref-board manual */
|
||||
mtdcr(uic3vr, 0x00000001); /* int31 highest, base=0x000 */
|
||||
mtdcr(uic3sr, 0xffffffff); /* clear all */
|
||||
|
||||
mtdcr (uic0sr, 0xfc000000); /* clear all */
|
||||
mtdcr (uic0er, 0x00000000); /* disable all */
|
||||
mtdcr (uic0cr, 0x00000000); /* all non-critical */
|
||||
mtdcr (uic0pr, 0xfc000000); /* */
|
||||
mtdcr (uic0tr, 0x00000000); /* */
|
||||
mtdcr (uic0vr, 0x00000001); /* */
|
||||
mtdcr(uic0sr, 0xfc000000); /* clear all */
|
||||
mtdcr(uic0er, 0x00000000); /* disable all */
|
||||
mtdcr(uic0cr, 0x00000000); /* all non-critical */
|
||||
mtdcr(uic0pr, 0xfc000000); /* */
|
||||
mtdcr(uic0tr, 0x00000000); /* */
|
||||
mtdcr(uic0vr, 0x00000001); /* */
|
||||
|
||||
LED0_ON();
|
||||
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int checkboard (void)
|
||||
int checkboard(void)
|
||||
{
|
||||
printf ("Board: XES XPedite1000 440GX\n");
|
||||
printf("Board: XES XPedite1000 440GX\n");
|
||||
|
||||
return (0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
phys_size_t initdram (int board_type)
|
||||
phys_size_t initdram(int board_type)
|
||||
{
|
||||
return spd_sdram();
|
||||
}
|
||||
|
||||
/*
|
||||
* This routine is called just prior to registering the hose and gives
|
||||
* the board the opportunity to check things. Returning a value of zero
|
||||
* indicates that things are bad & PCI initialization should be aborted.
|
||||
*
|
||||
* Different boards may wish to customize the pci controller structure
|
||||
* (add regions, override default access routines, etc) or perform
|
||||
* certain pre-initialization actions.
|
||||
*/
|
||||
|
||||
/*************************************************************************
|
||||
* pci_pre_init
|
||||
*
|
||||
* This routine is called just prior to registering the hose and gives
|
||||
* the board the opportunity to check things. Returning a value of zero
|
||||
* indicates that things are bad & PCI initialization should be aborted.
|
||||
*
|
||||
* Different boards may wish to customize the pci controller structure
|
||||
* (add regions, override default access routines, etc) or perform
|
||||
* certain pre-initialization actions.
|
||||
*
|
||||
************************************************************************/
|
||||
#if defined(CONFIG_PCI)
|
||||
int pci_pre_init(struct pci_controller * hose )
|
||||
int pci_pre_init(struct pci_controller * hose)
|
||||
{
|
||||
unsigned long strap;
|
||||
|
||||
/* See if we're supposed to setup the pci */
|
||||
mfsdr(sdr_sdstp1, strap);
|
||||
if ((strap & 0x00010000) == 0) {
|
||||
return (0);
|
||||
}
|
||||
if ((strap & 0x00010000) == 0)
|
||||
return 0;
|
||||
|
||||
#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
|
||||
/* Setup System Device Register PCIX0_XCR */
|
||||
@ -143,66 +135,55 @@ int pci_pre_init(struct pci_controller * hose )
|
||||
strap &= 0x0f000000;
|
||||
mtsdr(sdr_xcr, strap);
|
||||
#endif
|
||||
|
||||
return 1;
|
||||
}
|
||||
#endif /* defined(CONFIG_PCI) */
|
||||
|
||||
/*************************************************************************
|
||||
* pci_target_init
|
||||
*
|
||||
* The bootstrap configuration provides default settings for the pci
|
||||
* inbound map (PIM). But the bootstrap config choices are limited and
|
||||
* may not be sufficient for a given board.
|
||||
*
|
||||
************************************************************************/
|
||||
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
|
||||
void pci_target_init(struct pci_controller * hose )
|
||||
/*
|
||||
* The bootstrap configuration provides default settings for the pci
|
||||
* inbound map (PIM). But the bootstrap config choices are limited and
|
||||
* may not be sufficient for a given board.
|
||||
*/
|
||||
void pci_target_init(struct pci_controller * hose)
|
||||
{
|
||||
/*--------------------------------------------------------------------------+
|
||||
* Disable everything
|
||||
*--------------------------------------------------------------------------*/
|
||||
out32r( PCIX0_PIM0SA, 0 ); /* disable */
|
||||
out32r( PCIX0_PIM1SA, 0 ); /* disable */
|
||||
out32r( PCIX0_PIM2SA, 0 ); /* disable */
|
||||
out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
|
||||
/* Disable everything */
|
||||
out32r(PCIX0_PIM0SA, 0);
|
||||
out32r(PCIX0_PIM1SA, 0);
|
||||
out32r(PCIX0_PIM2SA, 0);
|
||||
out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
|
||||
|
||||
/*--------------------------------------------------------------------------+
|
||||
/*
|
||||
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
|
||||
* options to not support sizes such as 128/256 MB.
|
||||
*--------------------------------------------------------------------------*/
|
||||
out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
|
||||
out32r( PCIX0_PIM0LAH, 0 );
|
||||
out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
|
||||
*/
|
||||
out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
|
||||
out32r(PCIX0_PIM0LAH, 0);
|
||||
out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
|
||||
|
||||
out32r( PCIX0_BAR0, 0 );
|
||||
out32r(PCIX0_BAR0, 0);
|
||||
|
||||
/*--------------------------------------------------------------------------+
|
||||
* Program the board's subsystem id/vendor id
|
||||
*--------------------------------------------------------------------------*/
|
||||
out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
|
||||
out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
|
||||
/* Program the board's subsystem id/vendor id */
|
||||
out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
|
||||
out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
|
||||
|
||||
out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
|
||||
out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
|
||||
}
|
||||
#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
|
||||
|
||||
|
||||
/*************************************************************************
|
||||
* is_pci_host
|
||||
*
|
||||
* This routine is called to determine if a pci scan should be
|
||||
* performed. With various hardware environments (especially cPCI and
|
||||
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
||||
* bit in the strap register, or generic host/adapter assumptions.
|
||||
*
|
||||
* Rather than hard-code a bad assumption in the general 440 code, the
|
||||
* 440 pci code requires the board to decide at runtime.
|
||||
*
|
||||
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
||||
*
|
||||
*
|
||||
************************************************************************/
|
||||
#if defined(CONFIG_PCI)
|
||||
/*
|
||||
* This routine is called to determine if a pci scan should be
|
||||
* performed. With various hardware environments (especially cPCI and
|
||||
* PPMC) it's insufficient to depend on the state of the arbiter enable
|
||||
* bit in the strap register, or generic host/adapter assumptions.
|
||||
*
|
||||
* Rather than hard-code a bad assumption in the general 440 code, the
|
||||
* 440 pci code requires the board to decide at runtime.
|
||||
*
|
||||
* Return 0 for adapter mode, non-zero for host (monarch) mode.
|
||||
*/
|
||||
int is_pci_host(struct pci_controller *hose)
|
||||
{
|
||||
return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
|
||||
@ -216,11 +197,10 @@ int is_pci_host(struct pci_controller *hose)
|
||||
*/
|
||||
int post_hotkeys_pressed(void)
|
||||
{
|
||||
|
||||
return (ctrlc());
|
||||
return ctrlc();
|
||||
}
|
||||
|
||||
void post_word_store (ulong a)
|
||||
void post_word_store(ulong a)
|
||||
{
|
||||
volatile ulong *save_addr =
|
||||
(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
|
||||
@ -228,7 +208,7 @@ void post_word_store (ulong a)
|
||||
*save_addr = a;
|
||||
}
|
||||
|
||||
ulong post_word_load (void)
|
||||
ulong post_word_load(void)
|
||||
{
|
||||
volatile ulong *save_addr =
|
||||
(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
|
||||
|
||||
@ -20,51 +20,48 @@
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
/************************************************************************
|
||||
/*
|
||||
* config for XPedite1000 from XES Inc.
|
||||
* Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
|
||||
* (C) Copyright 2003 Sandburst Corporation
|
||||
* board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
|
||||
***********************************************************************/
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* High Level Configuration Options
|
||||
*----------------------------------------------------------------------*/
|
||||
/* High Level Configuration Options */
|
||||
#define CONFIG_XPEDITE1K 1 /* Board is XPedite 1000 */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
||||
#define CONFIG_440 1
|
||||
#define CONFIG_440GX 1 /* 440 GX */
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
||||
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
|
||||
|
||||
|
||||
/* POST support */
|
||||
#define CONFIG_POST (CONFIG_SYS_POST_RTC | \
|
||||
#define CONFIG_POST (CONFIG_SYS_POST_RTC | \
|
||||
CONFIG_SYS_POST_I2C)
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
/*
|
||||
* Base addresses -- Note these are effective addresses where the
|
||||
* actual resources get mapped (not physical addresses)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
|
||||
*/
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
|
||||
#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
|
||||
|
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
|
||||
#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
|
||||
#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
|
||||
#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
|
||||
#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
|
||||
|
||||
#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
|
||||
#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
|
||||
#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
|
||||
#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
|
||||
|
||||
#define USR_LED0 0x00000080
|
||||
#define USR_LED1 0x00000100
|
||||
#define USR_LED2 0x00000200
|
||||
#define USR_LED3 0x00000400
|
||||
#define USR_LED0 0x00000080
|
||||
#define USR_LED1 0x00000100
|
||||
#define USR_LED2 0x00000200
|
||||
#define USR_LED3 0x00000400
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
extern unsigned long in32(unsigned int);
|
||||
@ -81,50 +78,34 @@ extern void out32(unsigned int, unsigned long);
|
||||
#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Initial RAM & stack pointer (placed in internal SRAM)
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_SYS_TEMP_STACK_OCM 1
|
||||
#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
/* Initial RAM & stack pointer (placed in internal SRAM) */
|
||||
#define CONFIG_SYS_TEMP_STACK_OCM 1
|
||||
#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
|
||||
#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
|
||||
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
|
||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc */
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Serial Port
|
||||
*----------------------------------------------------------------------*/
|
||||
/* Serial Port */
|
||||
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
|
||||
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE \
|
||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
|
||||
/* RTC: STMicro M41T00 */
|
||||
#define CONFIG_RTC_M41T11 1
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* NVRAM/RTC
|
||||
*
|
||||
* NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
|
||||
* The DS1743 code assumes this condition (i.e. -- it assumes the base
|
||||
* address for the RTC registers is:
|
||||
*
|
||||
* CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
|
||||
*
|
||||
*----------------------------------------------------------------------*/
|
||||
/* TBS: Xpedite 1000 has STMicro M41T00 via IIC */
|
||||
#define CONFIG_RTC_M41T11 1
|
||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
/*
|
||||
* FLASH related
|
||||
*----------------------------------------------------------------------*/
|
||||
*/
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
||||
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
|
||||
@ -133,70 +114,60 @@ extern void out32(unsigned int, unsigned long);
|
||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
||||
|
||||
#undef CONFIG_SYS_FLASH_CHECKSUM
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* DDR SDRAM
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
|
||||
#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
|
||||
#define CONFIG_VERY_BIG_RAM 1
|
||||
/*-----------------------------------------------------------------------
|
||||
* I2C
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#undef CONFIG_SOFT_I2C /* I2C bit-banged */
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
/* DDR SDRAM */
|
||||
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
|
||||
#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */
|
||||
#define CONFIG_VERY_BIG_RAM 1
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
||||
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x7f
|
||||
#define CONFIG_SYS_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69} /* Don't probe these addrs */
|
||||
#define CONFIG_SYS_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Environment
|
||||
*----------------------------------------------------------------------*/
|
||||
#define CONFIG_ENV_IS_IN_EEPROM 1
|
||||
#define CONFIG_ENV_SIZE 0x100 /* Size of Environment vars */
|
||||
/* Environment */
|
||||
#define CONFIG_ENV_IS_IN_EEPROM 1
|
||||
#define CONFIG_ENV_SIZE 0x100 /* Size of Environment vars */
|
||||
#define CONFIG_ENV_OFFSET 0x100
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* this is actually the second page of the eeprom */
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
||||
|
||||
#define CONFIG_BOOTARGS "root=/dev/hda1 "
|
||||
#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
|
||||
#define CONFIG_BOOTDELAY 5 /* disable autoboot */
|
||||
#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */
|
||||
#define CONFIG_BOOTDELAY 5 /* disable autoboot */
|
||||
#define CONFIG_BAUDRATE 9600
|
||||
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||||
|
||||
#define CONFIG_PPC4xx_EMAC
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_MII 1 /* MII PHY management */
|
||||
#define CONFIG_PHY_ADDR 0 /* PHY address phy0 not populated */
|
||||
#define CONFIG_PHY1_ADDR 1 /* PHY address phy1 not populated */
|
||||
#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */
|
||||
#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */
|
||||
#define CONFIG_NET_MULTI 1
|
||||
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
||||
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
||||
#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
||||
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
||||
#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
|
||||
|
||||
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
|
||||
#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
|
||||
#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
|
||||
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
|
||||
#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */
|
||||
#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */
|
||||
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
/* BOOTP options */
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
* Command line configuration
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
@ -212,48 +183,45 @@ extern void out32(unsigned int, unsigned long);
|
||||
#define CONFIG_CMD_DIAG
|
||||
#define CONFIG_CMD_FAT
|
||||
|
||||
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#else
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#endif
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||||
|
||||
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||||
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* PCI stuff
|
||||
*-----------------------------------------------------------------------
|
||||
/*
|
||||
* PCI
|
||||
*/
|
||||
/* General PCI */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
|
||||
#define CONFIG_PCI /* include pci support */
|
||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
||||
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
||||
#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
|
||||
|
||||
/* Board-specific PCI */
|
||||
#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
|
||||
|
||||
#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
|
||||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
||||
#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */
|
||||
#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */
|
||||
|
||||
/*
|
||||
* For booting Linux, the board info and command line data
|
||||
* have to be in the first 8 MB of memory, since this is
|
||||
@ -263,11 +231,9 @@ extern void out32(unsigned int, unsigned long);
|
||||
|
||||
/*
|
||||
* Internal Definitions
|
||||
*
|
||||
* Boot Flags
|
||||
*/
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user