leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

serial: ns16550: Add an option to specify the debug UART register shift

Browse Source 
This UART permits different register spacing. To support the debug UART on
devices which have a spacing other than 1 byte, allow the shift value to
be specified.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2015-02-27 22:06:25 -07:00
parent 5b5e9ba3f7
commit dd0b0122ba
2 changed files with 24 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/serial/Kconfig
View File

@ -66,6 +66,16 @@ config DEBUG_UART_CLOCK
A default should be provided by your board, but if not you will need
to use the correct value here.
config DEBUG_UART_SHIFT
int "UART register shift"
depends on DEBUG_UART
default 0 if DEBUG_UART
help
Some UARTs (notably ns16550) support different register layouts
where the registers are spaced either as bytes, words or some other
value. Use this value to specify the shift to use, where 0=byte
registers, 2=32-bit word registers, etc.
config UNIPHIER_SERIAL
bool "UniPhier on-chip UART support"
depends on ARCH_UNIPHIER && DM_SERIAL

23
drivers/serial/ns16550.c
View File

@ -254,15 +254,20 @@ void debug_uart_init(void)
*/
baud_divisor = calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
CONFIG_BAUDRATE);
baud_divisor = 13;
serial_out_shift(&com_port->ier, CONFIG_DEBUG_UART_SHIFT,
CONFIG_SYS_NS16550_IER);
serial_out_shift(&com_port->mcr, CONFIG_DEBUG_UART_SHIFT, UART_MCRVAL);
serial_out_shift(&com_port->fcr, CONFIG_DEBUG_UART_SHIFT, UART_FCRVAL);
serial_out_shift(&com_port->ier, 0, CONFIG_SYS_NS16550_IER);
serial_out_shift(&com_port->mcr, 0, UART_MCRVAL);
serial_out_shift(&com_port->fcr, 0, UART_FCRVAL);
serial_out_shift(&com_port->lcr, 0, UART_LCR_BKSE | UART_LCRVAL);
serial_out_shift(&com_port->dll, 0, baud_divisor & 0xff);
serial_out_shift(&com_port->dlm, 0, (baud_divisor >> 8) & 0xff);
serial_out_shift(&com_port->lcr, 0, UART_LCRVAL);
serial_out_shift(&com_port->lcr, CONFIG_DEBUG_UART_SHIFT,
UART_LCR_BKSE | UART_LCRVAL);
serial_out_shift(&com_port->dll, CONFIG_DEBUG_UART_SHIFT,
baud_divisor & 0xff);
serial_out_shift(&com_port->dlm, CONFIG_DEBUG_UART_SHIFT,
(baud_divisor >> 8) & 0xff);
serial_out_shift(&com_port->lcr, CONFIG_DEBUG_UART_SHIFT,
UART_LCRVAL);
}
static inline void _debug_uart_putc(int ch)
@ -271,7 +276,7 @@ static inline void _debug_uart_putc(int ch)
while (!(serial_in_shift(&com_port->lsr, 0) & UART_LSR_THRE))
;
serial_out_shift(&com_port->thr, 0, ch);
serial_out_shift(&com_port->thr, CONFIG_DEBUG_UART_SHIFT, ch);
}
DEBUG_UART_FUNCS