Merge http://git.denx.de/u-boot-samsung

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	configs/peach-pi_defconfig
	configs/peach-pit_defconfig

drivers/clk/Kconfig

@@ -21,5 +21,6 @@ config SPL_CLK
 	  used as U-Boot proper.
 
 source "drivers/clk/uniphier/Kconfig"
+source "drivers/clk/exynos/Kconfig"
 
 endmenu

drivers/clk/Makefile

@@ -11,3 +11,4 @@ obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
 obj-$(CONFIG_SANDBOX) += clk_sandbox.o
 obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
 obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
+obj-$(CONFIG_CLK_EXYNOS) += exynos/

drivers/clk/exynos/Kconfig

@@ -0,0 +1,18 @@
+config CLK_EXYNOS
+	bool
+	select CLK
+	help
+	  This enables support for common clock driver API on Samsung
+	  Exynos SoCs.
+
+menu "Clock drivers for Exynos SoCs"
+	depends on CLK_EXYNOS
+
+config CLK_EXYNOS7420
+	bool "Clock driver for Samsung's Exynos7420 SoC"
+	default y
+	help
+	  This enables common clock driver support for platforms based
+	  on Samsung Exynos7420 SoC.
+
+endmenu

drivers/clk/exynos/Makefile

@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2016 Samsung Electronics
+# Thomas Abraham <thomas.ab@samsung.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y				+= clk-pll.o
+obj-$(CONFIG_CLK_EXYNOS7420)	+= clk-exynos7420.o

drivers/clk/exynos/clk-exynos7420.c

@@ -0,0 +1,236 @@
+/*
+ * Samsung Exynos7420 clock driver.
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <clk.h>
+#include <asm/io.h>
+#include <dt-bindings/clock/exynos7420-clk.h>
+#include "clk-pll.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DIVIDER(reg, shift, mask)	\
+	(((readl(reg) >> shift) & mask) + 1)
+
+/* CMU TOPC block device structure */
+struct exynos7420_clk_cmu_topc {
+	unsigned int	rsvd1[68];
+	unsigned int	bus0_pll_con[2];
+	unsigned int	rsvd2[2];
+	unsigned int	bus1_pll_con[2];
+	unsigned int	rsvd3[54];
+	unsigned int	mux_sel[6];
+	unsigned int	rsvd4[250];
+	unsigned int	div[4];
+};
+
+/* CMU TOP0 block device structure */
+struct exynos7420_clk_cmu_top0 {
+	unsigned int	rsvd0[128];
+	unsigned int	mux_sel[7];
+	unsigned int	rsvd1[261];
+	unsigned int	div_peric[5];
+};
+
+/**
+ * struct exynos7420_clk_topc_priv - private data for CMU topc clock driver.
+ *
+ * @topc: base address of the memory mapped CMU TOPC controller.
+ * @fin_freq: frequency of the Oscillator clock.
+ * @sclk_bus0_pll_a: frequency of sclk_bus0_pll_a clock.
+ * @sclk_bus1_pll_a: frequency of sclk_bus1_pll_a clock.
+ */
+struct exynos7420_clk_topc_priv {
+	struct exynos7420_clk_cmu_topc *topc;
+	unsigned long fin_freq;
+	unsigned long sclk_bus0_pll_a;
+	unsigned long sclk_bus1_pll_a;
+};
+
+/**
+ * struct exynos7420_clk_top0_priv - private data for CMU top0 clock driver.
+ *
+ * @top0: base address of the memory mapped CMU TOP0 controller.
+ * @mout_top0_bus0_pll_half: frequency of mout_top0_bus0_pll_half clock
+ * @sclk_uart2: frequency of sclk_uart2 clock.
+ */
+struct exynos7420_clk_top0_priv {
+	struct exynos7420_clk_cmu_top0 *top0;
+	unsigned long mout_top0_bus0_pll_half;
+	unsigned long sclk_uart2;
+};
+
+static ulong exynos7420_topc_get_periph_rate(struct udevice *dev, int periph)
+{
+	struct exynos7420_clk_topc_priv *priv = dev_get_priv(dev);
+
+	switch (periph) {
+	case DOUT_SCLK_BUS0_PLL:
+	case SCLK_BUS0_PLL_A:
+	case SCLK_BUS0_PLL_B:
+		return priv->sclk_bus0_pll_a;
+	case DOUT_SCLK_BUS1_PLL:
+	case SCLK_BUS1_PLL_A:
+	case SCLK_BUS1_PLL_B:
+		return priv->sclk_bus1_pll_a;
+	default:
+		return 0;
+	}
+}
+
+static struct clk_ops exynos7420_clk_topc_ops = {
+	.get_periph_rate	= exynos7420_topc_get_periph_rate,
+};
+
+static int exynos7420_clk_topc_probe(struct udevice *dev)
+{
+	struct exynos7420_clk_topc_priv *priv = dev_get_priv(dev);
+	struct exynos7420_clk_cmu_topc *topc;
+	struct udevice *clk_dev;
+	unsigned long rate;
+	fdt_addr_t base;
+	int ret;
+
+	base = dev_get_addr(dev);
+	if (base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	topc = (struct exynos7420_clk_cmu_topc *)base;
+	priv->topc = topc;
+
+	ret = clk_get_by_index(dev, 0, &clk_dev);
+	if (ret >= 0)
+		priv->fin_freq = clk_get_rate(clk_dev);
+
+	rate = pll145x_get_rate(&topc->bus0_pll_con[0], priv->fin_freq);
+	if (readl(&topc->mux_sel[1]) & (1 << 16))
+		rate >>= 1;
+	rate /= DIVIDER(&topc->div[3], 0, 0xf);
+	priv->sclk_bus0_pll_a = rate;
+
+	rate = pll145x_get_rate(&topc->bus1_pll_con[0], priv->fin_freq) /
+			DIVIDER(&topc->div[3], 8, 0xf);
+	priv->sclk_bus1_pll_a = rate;
+
+	return 0;
+}
+
+static ulong exynos7420_top0_get_periph_rate(struct udevice *dev, int periph)
+{
+	struct exynos7420_clk_top0_priv *priv = dev_get_priv(dev);
+	struct exynos7420_clk_cmu_top0 *top0 = priv->top0;
+
+	switch (periph) {
+	case CLK_SCLK_UART2:
+		return priv->mout_top0_bus0_pll_half /
+			DIVIDER(&top0->div_peric[3], 8, 0xf);
+	default:
+		return 0;
+	}
+}
+
+static struct clk_ops exynos7420_clk_top0_ops = {
+	.get_periph_rate	= exynos7420_top0_get_periph_rate,
+};
+
+static int exynos7420_clk_top0_probe(struct udevice *dev)
+{
+	struct exynos7420_clk_top0_priv *priv;
+	struct exynos7420_clk_cmu_top0 *top0;
+	struct udevice *clk_dev;
+	fdt_addr_t base;
+	int ret;
+
+	priv = dev_get_priv(dev);
+	if (!priv)
+		return -EINVAL;
+
+	base = dev_get_addr(dev);
+	if (base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	top0 = (struct exynos7420_clk_cmu_top0 *)base;
+	priv->top0 = top0;
+
+	ret = clk_get_by_index(dev, 1, &clk_dev);
+	if (ret >= 0) {
+		priv->mout_top0_bus0_pll_half =
+			clk_get_periph_rate(clk_dev, ret);
+		if (readl(&top0->mux_sel[1]) & (1 << 16))
+			priv->mout_top0_bus0_pll_half >>= 1;
+	}
+
+	return 0;
+}
+
+static ulong exynos7420_peric1_get_periph_rate(struct udevice *dev, int periph)
+{
+	struct udevice *clk_dev;
+	unsigned int ret;
+	unsigned long freq = 0;
+
+	switch (periph) {
+	case SCLK_UART2:
+		ret = clk_get_by_index(dev, 3, &clk_dev);
+		if (ret < 0)
+			return ret;
+		freq = clk_get_periph_rate(clk_dev, ret);
+		break;
+	}
+
+	return freq;
+}
+
+static struct clk_ops exynos7420_clk_peric1_ops = {
+	.get_periph_rate	= exynos7420_peric1_get_periph_rate,
+};
+
+static const struct udevice_id exynos7420_clk_topc_compat[] = {
+	{ .compatible = "samsung,exynos7-clock-topc" },
+	{ }
+};
+
+U_BOOT_DRIVER(exynos7420_clk_topc) = {
+	.name = "exynos7420-clock-topc",
+	.id = UCLASS_CLK,
+	.of_match = exynos7420_clk_topc_compat,
+	.probe = exynos7420_clk_topc_probe,
+	.priv_auto_alloc_size = sizeof(struct exynos7420_clk_topc_priv),
+	.ops = &exynos7420_clk_topc_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
+
+static const struct udevice_id exynos7420_clk_top0_compat[] = {
+	{ .compatible = "samsung,exynos7-clock-top0" },
+	{ }
+};
+
+U_BOOT_DRIVER(exynos7420_clk_top0) = {
+	.name = "exynos7420-clock-top0",
+	.id = UCLASS_CLK,
+	.of_match = exynos7420_clk_top0_compat,
+	.probe = exynos7420_clk_top0_probe,
+	.priv_auto_alloc_size = sizeof(struct exynos7420_clk_top0_priv),
+	.ops = &exynos7420_clk_top0_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
+
+static const struct udevice_id exynos7420_clk_peric1_compat[] = {
+	{ .compatible = "samsung,exynos7-clock-peric1" },
+	{ }
+};
+
+U_BOOT_DRIVER(exynos7420_clk_peric1) = {
+	.name = "exynos7420-clock-peric1",
+	.id = UCLASS_CLK,
+	.of_match = exynos7420_clk_peric1_compat,
+	.ops = &exynos7420_clk_peric1_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};

drivers/clk/exynos/clk-pll.c

@@ -0,0 +1,33 @@
+/*
+ * Exynos PLL helper functions for clock drivers.
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <div64.h>
+
+#define PLL145X_MDIV_SHIFT	16
+#define PLL145X_MDIV_MASK	0x3ff
+#define PLL145X_PDIV_SHIFT	8
+#define PLL145X_PDIV_MASK	0x3f
+#define PLL145X_SDIV_SHIFT	0
+#define PLL145X_SDIV_MASK	0x7
+
+unsigned long pll145x_get_rate(unsigned int *con1, unsigned long fin_freq)
+{
+	unsigned long pll_con1 = readl(con1);
+	unsigned long mdiv, sdiv, pdiv;
+	uint64_t fvco = fin_freq;
+
+	mdiv = (pll_con1 >> PLL145X_MDIV_SHIFT) & PLL145X_MDIV_MASK;
+	pdiv = (pll_con1 >> PLL145X_PDIV_SHIFT) & PLL145X_PDIV_MASK;
+	sdiv = (pll_con1 >> PLL145X_SDIV_SHIFT) & PLL145X_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+	return (unsigned long)fvco;
+}

drivers/clk/exynos/clk-pll.h

@@ -0,0 +1,9 @@
+/*
+ * Exynos PLL helper functions for clock drivers.
+ * Copyright (C) 2016 Samsung Electronics
+ * Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+unsigned long pll145x_get_rate(unsigned int *con1, unsigned long fin_freq);