arm: dts: imx8m*-venice: add gpio hog support
Add gpio hog support for board-specific gpio lines: - put hogs in u-boot.dtsi so as to keep the regular dts files in sync with the kernel. The hogs will not be put in the kernel as that makes them un-usable by userspace as well as re-initializes them to dt defaults overriding changes which may have been done by bootloader commands. - specify gpio names and initial config - enable GPIO_HOG Signed-off-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
committed by
Stefano Babic
parent
fb9ec33878
commit
d5cc234154
@@ -3,3 +3,49 @@
|
|||||||
* Copyright 2021 Gateworks Corporation
|
* Copyright 2021 Gateworks Corporation
|
||||||
*/
|
*/
|
||||||
#include "imx8mm-venice-gw700x-u-boot.dtsi"
|
#include "imx8mm-venice-gw700x-u-boot.dtsi"
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
pci_usb_sel {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "pci_usb_sel";
|
||||||
|
};
|
||||||
|
|
||||||
|
dio_0 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio0";
|
||||||
|
};
|
||||||
|
|
||||||
|
dio_1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <9 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio1";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio4 {
|
||||||
|
dio_2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio2";
|
||||||
|
};
|
||||||
|
|
||||||
|
dio_3 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio3";
|
||||||
|
};
|
||||||
|
|
||||||
|
pci_wdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "pci_wdis#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|||||||
@@ -3,3 +3,84 @@
|
|||||||
* Copyright 2021 Gateworks Corporation
|
* Copyright 2021 Gateworks Corporation
|
||||||
*/
|
*/
|
||||||
#include "imx8mm-venice-gw700x-u-boot.dtsi"
|
#include "imx8mm-venice-gw700x-u-boot.dtsi"
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
rs485_term {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs485_term";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio4 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio4";
|
||||||
|
};
|
||||||
|
|
||||||
|
pci_usb_sel {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "pci_usb_sel";
|
||||||
|
};
|
||||||
|
|
||||||
|
dio_0 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio0";
|
||||||
|
};
|
||||||
|
|
||||||
|
dio_1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <9 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio1";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio4 {
|
||||||
|
rs485_en {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs485_en";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio3 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio3";
|
||||||
|
};
|
||||||
|
|
||||||
|
rs485_half {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <2 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs485_hd";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio1";
|
||||||
|
};
|
||||||
|
|
||||||
|
pci_wdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "pci_wdis#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|||||||
@@ -3,3 +3,84 @@
|
|||||||
* Copyright 2021 Gateworks Corporation
|
* Copyright 2021 Gateworks Corporation
|
||||||
*/
|
*/
|
||||||
#include "imx8mm-venice-gw700x-u-boot.dtsi"
|
#include "imx8mm-venice-gw700x-u-boot.dtsi"
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
rs485_term {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs485_term";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio4 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio4";
|
||||||
|
};
|
||||||
|
|
||||||
|
pci_usb_sel {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "pci_usb_sel";
|
||||||
|
};
|
||||||
|
|
||||||
|
dio_0 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio0";
|
||||||
|
};
|
||||||
|
|
||||||
|
dio_1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <9 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dio1";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio4 {
|
||||||
|
rs485_en {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs485_en";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio3 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio3";
|
||||||
|
};
|
||||||
|
|
||||||
|
rs485_half {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <2 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs485_hd";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipi_gpio1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio1";
|
||||||
|
};
|
||||||
|
|
||||||
|
pci_wdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "pci_wdis#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|||||||
@@ -5,6 +5,124 @@
|
|||||||
|
|
||||||
#include "imx8mm-venice-u-boot.dtsi"
|
#include "imx8mm-venice-u-boot.dtsi"
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
uart1_rs422 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_rs422#";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1rs485 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_rs485#";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1rs232 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_rs232#";
|
||||||
|
};
|
||||||
|
|
||||||
|
dig1in {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig1_in";
|
||||||
|
};
|
||||||
|
|
||||||
|
dig1out {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig1_out";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio4 {
|
||||||
|
uart3_rs232 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <6 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart3_rs232#";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart3_rs422 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart3_rs422#";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart3_rs485 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <8 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart3_rs485#";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart4_rs485 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <27 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart4_rs485#";
|
||||||
|
};
|
||||||
|
|
||||||
|
sim1det {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <29 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "sim1_det";
|
||||||
|
};
|
||||||
|
|
||||||
|
sim2det {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <30 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "sim2_det";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio5 {
|
||||||
|
dig2out {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig2_out";
|
||||||
|
};
|
||||||
|
|
||||||
|
dig2in {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig2_in";
|
||||||
|
};
|
||||||
|
|
||||||
|
sim2sel {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "sim2_sel";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart4_rs232 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <10 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart4_rs232#";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart4_rs422 {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <13 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart4_rs422#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
&fec1 {
|
&fec1 {
|
||||||
phy-reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
|
phy-reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
|
||||||
phy-reset-duration = <1>;
|
phy-reset-duration = <1>;
|
||||||
|
|||||||
@@ -5,6 +5,156 @@
|
|||||||
|
|
||||||
#include "imx8mm-venice-u-boot.dtsi"
|
#include "imx8mm-venice-u-boot.dtsi"
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
m2rst {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <13 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_reset";
|
||||||
|
};
|
||||||
|
|
||||||
|
m2wdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <15 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_wdis#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio2 {
|
||||||
|
uart2en {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <8 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart2_en#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio3 {
|
||||||
|
m2gdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_gdis#";
|
||||||
|
};
|
||||||
|
|
||||||
|
m2off {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_off#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio4 {
|
||||||
|
ampgpio3 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <11 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "amp_gpio3";
|
||||||
|
};
|
||||||
|
|
||||||
|
ampgpio2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <12 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "amp_gpio2";
|
||||||
|
};
|
||||||
|
|
||||||
|
ampgpio1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <14 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "amp_gpio1";
|
||||||
|
};
|
||||||
|
|
||||||
|
ltrpwr {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <16 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "lte_pwr#";
|
||||||
|
};
|
||||||
|
|
||||||
|
lterst {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <17 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "lte_rst";
|
||||||
|
};
|
||||||
|
|
||||||
|
ampgpio4 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <20 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "amp_gpio4";
|
||||||
|
};
|
||||||
|
|
||||||
|
appgpio1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <21 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "app_gpio1";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1rs485 {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <23 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_rs485";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1term {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <25 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_term";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1half {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <26 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_half";
|
||||||
|
};
|
||||||
|
|
||||||
|
appgpio2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <27 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "app_gpio2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipigpio1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <28 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio1";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio5 {
|
||||||
|
mipigpio4 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio4";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipigpio3 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio3";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipigpio2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio2";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
&fec1 {
|
&fec1 {
|
||||||
phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||||
phy-reset-duration = <1>;
|
phy-reset-duration = <1>;
|
||||||
|
|||||||
@@ -5,6 +5,89 @@
|
|||||||
|
|
||||||
#include "imx8mm-venice-u-boot.dtsi"
|
#include "imx8mm-venice-u-boot.dtsi"
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
rs422en {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <10 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs422_en#";
|
||||||
|
};
|
||||||
|
|
||||||
|
rs485en {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <11 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs485_en#";
|
||||||
|
};
|
||||||
|
|
||||||
|
rs232en {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <12 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "rs232_en#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio2 {
|
||||||
|
dig2in {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <0 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig2_in";
|
||||||
|
};
|
||||||
|
|
||||||
|
dig2out {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig2_out#";
|
||||||
|
};
|
||||||
|
|
||||||
|
dig1out {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <8 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig1_out#";
|
||||||
|
};
|
||||||
|
|
||||||
|
dig1in {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <9 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "dig1_in";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio5 {
|
||||||
|
sim1det {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <7 GPIO_ACTIVE_LOW>;
|
||||||
|
line-name = "sim1_det#";
|
||||||
|
};
|
||||||
|
|
||||||
|
sim2det {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <8 GPIO_ACTIVE_LOW>;
|
||||||
|
line-name = "sim2_det#";
|
||||||
|
};
|
||||||
|
|
||||||
|
sim2sel {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <9 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "sim2_sel";
|
||||||
|
};
|
||||||
|
|
||||||
|
pci_wdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <12 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "pci_wdis#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
&fec1 {
|
&fec1 {
|
||||||
phy-reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
|
phy-reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
|
||||||
phy-reset-duration = <1>;
|
phy-reset-duration = <1>;
|
||||||
|
|||||||
@@ -5,6 +5,114 @@
|
|||||||
|
|
||||||
#include "imx8mn-venice-u-boot.dtsi"
|
#include "imx8mn-venice-u-boot.dtsi"
|
||||||
|
|
||||||
|
&gpio1 {
|
||||||
|
m2rst {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <13 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_reset";
|
||||||
|
};
|
||||||
|
|
||||||
|
m2wdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <15 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_wdis#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio2 {
|
||||||
|
uart2en {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <8 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart2_en#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio3 {
|
||||||
|
m2gdis {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_gdis#";
|
||||||
|
};
|
||||||
|
|
||||||
|
m2off {
|
||||||
|
gpio-hog;
|
||||||
|
output-high;
|
||||||
|
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "m2_off#";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio4 {
|
||||||
|
appgpio1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <21 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "app_gpio1";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1rs485 {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <23 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_rs485";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1term {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <25 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_term";
|
||||||
|
};
|
||||||
|
|
||||||
|
uart1half {
|
||||||
|
gpio-hog;
|
||||||
|
output-low;
|
||||||
|
gpios = <26 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "uart1_half";
|
||||||
|
};
|
||||||
|
|
||||||
|
appgpio2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <27 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "app_gpio2";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipigpio1 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <28 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio1";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpio5 {
|
||||||
|
mipigpio4 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio4";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipigpio3 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <4 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio3";
|
||||||
|
};
|
||||||
|
|
||||||
|
mipigpio2 {
|
||||||
|
gpio-hog;
|
||||||
|
input;
|
||||||
|
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||||
|
line-name = "mipi_gpio2";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
&fec1 {
|
&fec1 {
|
||||||
phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||||
phy-reset-duration = <1>;
|
phy-reset-duration = <1>;
|
||||||
|
|||||||
@@ -73,6 +73,7 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
|
|||||||
CONFIG_CLK_COMPOSITE_CCF=y
|
CONFIG_CLK_COMPOSITE_CCF=y
|
||||||
CONFIG_SPL_CLK_IMX8MM=y
|
CONFIG_SPL_CLK_IMX8MM=y
|
||||||
CONFIG_CLK_IMX8MM=y
|
CONFIG_CLK_IMX8MM=y
|
||||||
|
CONFIG_GPIO_HOG=y
|
||||||
CONFIG_MXC_GPIO=y
|
CONFIG_MXC_GPIO=y
|
||||||
CONFIG_DM_I2C=y
|
CONFIG_DM_I2C=y
|
||||||
CONFIG_LED=y
|
CONFIG_LED=y
|
||||||
|
|||||||
@@ -72,6 +72,7 @@ CONFIG_TFTP_BLOCKSIZE=4096
|
|||||||
CONFIG_SPL_DM=y
|
CONFIG_SPL_DM=y
|
||||||
CONFIG_SPL_CLK_IMX8MN=y
|
CONFIG_SPL_CLK_IMX8MN=y
|
||||||
CONFIG_CLK_IMX8MN=y
|
CONFIG_CLK_IMX8MN=y
|
||||||
|
CONFIG_GPIO_HOG=y
|
||||||
CONFIG_MXC_GPIO=y
|
CONFIG_MXC_GPIO=y
|
||||||
CONFIG_DM_I2C=y
|
CONFIG_DM_I2C=y
|
||||||
CONFIG_LED=y
|
CONFIG_LED=y
|
||||||
|
|||||||
Reference in New Issue
Block a user