board: axy17lte: get board usable - add bootcmd and docs

U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`

In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration

What done:
- Rearrange defconfig option order
- Add CONFIG_SAVE_PREV_BL_* options
- Doc updates:
  - remove wrong SBOOT memory corruption note, because
  memory is changed during u-boot bringup process,
  not by SBOOT
  - put payload on ramdisk place in abl boot image
  creation step

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>

configs/a3y17lte_defconfig

@@ -11,8 +11,11 @@ CONFIG_SYS_LOAD_ADDR=0x40001000
 CONFIG_FIT=y
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
+CONFIG_SAVE_PREV_BL_FDT_ADDR=y
+CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_DM_I2C_GPIO=y
+CONFIG_LMB_MAX_REGIONS=64

configs/a5y17lte_defconfig

@@ -11,8 +11,11 @@ CONFIG_SYS_LOAD_ADDR=0x40001000
 CONFIG_FIT=y
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
+CONFIG_SAVE_PREV_BL_FDT_ADDR=y
+CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_DM_I2C_GPIO=y
+CONFIG_LMB_MAX_REGIONS=64

configs/a7y17lte_defconfig

@@ -11,8 +11,11 @@ CONFIG_SYS_LOAD_ADDR=0x40001000
 CONFIG_FIT=y
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="echo Read pressed buttons status;KEY_VOLUMEUP=gpa20;KEY_HOME=gpa17;KEY_VOLUMEDOWN=gpa21;KEY_POWER=gpa00;PRESSED=0;RELEASED=1;if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; else setenv VOLUME_UP $RELEASED; fi;if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; else setenv VOLUME_DOWN $RELEASED; fi;if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;"
+CONFIG_SAVE_PREV_BL_FDT_ADDR=y
+CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_DM_I2C_GPIO=y
+CONFIG_LMB_MAX_REGIONS=64

doc/board/samsung/axy17lte.rst

@@ -66,26 +66,17 @@ and is therefore SBOOT's payload.
 It may be pure u-boot (with loading u-boot's payload from flash in mind),
 or u-boot + u-boot's payload.
 
-It should be kept in mind, that SBOOT binary patches it's payload after loading
-in address range 0x401f8550-0x401f9280. Given SBOOT loads payload to 0x40001000,
-a range of 0x1f7550-0x1f8280 (2061648-2065024) in a payload file
-will be corrupted after loading to RAM.
-
 Creating payload file
 """""""""""""""""""""
 - Assemble FIT image for your kernel
-- Create a file for u-boot payload ``touch sboot-payload``
-- Write zeroes till 0x200000 address to be sure SBOOT won't corrupt your info
-  ``dd if=/dev/zero of=sboot-payload bs=$((0x200000)) count=1``
-- Write u-boot to the start of the payload ``dd if=<u-boot.bin path> of=sboot-payload``
-- Write FIT image to payload from 0x200000 address
-  ``dd if=<FIT image path> of=sboot-payload seek=1 bs=2M``
 
 Creating android boot image
 """""""""""""""""""""""""""
 Once payload created, it's time for android image::
 
-  mkbootimg --base 0x40000000 --kernel_offset 0x00000000 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --pagesize 2048 --second_offset 0x00f00000 --kernel <sboot-payload path> -o uboot.img
+  uboot=<path to u-boot.bin file>
+  ramdisk=<path to FIT payload file>
+  mkbootimg --base 0x40000000 --kernel_offset 0x00000000 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --pagesize 2048 --second_offset 0x00f00000 --kernel "$uboot" --ramdisk "$ramdisk" -o uboot.img
 
 Note, that stock Samsung bootloader ignores offsets, set in mkbootimg.
 

include/configs/exynos78x0-common.h

@@ -35,6 +35,7 @@
 
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE + SZ_2M - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_BOOTM_LEN	SZ_32M
 /* DRAM Memory Banks */
 #define SDRAM_BANK_SIZE		(256UL << 20UL)	/* 256 MB */
 #define PHYS_SDRAM_1		CONFIG_SYS_SDRAM_BASE
@@ -79,7 +80,10 @@
 #define EXYNOS_FDTFILE_SETTING
 #endif
 
+/* Cannot use bootdelay > 0, because timer is not working */
 #define EXTRA_ENV_SETTINGS \
+	"bootdelay=0\0" \
+	"bootcmd=source $prevbl_initrd_start_addr:bootscript\0"	\
 	EXYNOS_DEVICE_SETTINGS \
 	EXYNOS_FDTFILE_SETTING \
 	MEM_LAYOUT_ENV_SETTINGS