dm: pci: Support bridge device configuration correctly

Commit aec241d "dm: pci: Use the correct hose when configuring devices"
was an attempt to fix pci bridge device configuration, but unfortunately
that does not work 100%. In pciauto_config_devices(), the fix tried to
call pciauto_config_device() with a ctlr_hose which is supposed to be
the root controller hose, however when walking through a pci topology
with 2 or more pci bridges this logic simply fails.

The call chain is: pciauto_config_devices()->pciauto_config_device()
->dm_pci_hose_probe_bus(). Here the call to dm_pci_hose_probe_bus()
does not make any sense as the given hose is not the bridge device's
hose, instead it is either the root controller's hose (case#1: if it
is the 2nd pci bridge), or the bridge's parent bridge's hose (case#2:
if it is the 3rd pci bridge). In both cases the logic is wrong.

For example, for failing case#1 if the bridge device to config has the
same devfn as one of the devices under the root controller, the call
to pci_bus_find_devfn() will return the udevice of that pci device
under the root controller as the bus, but this is wrong as the udevice
is not a bus which does not contain all the necessary bits associated
with the udevice which causes further failures.

To correctly support pci bridge device configuration, we should still
call pciauto_config_device() with the pci bridge's hose directly.
In order to access valid pci region information, we need to refer to
the root controller simply by a call to pci_bus_to_hose(0) and get the
region information there in the pciauto_prescan_setup_bridge(),
pciauto_postscan_setup_bridge() and pciauto_config_device().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

drivers/pci/pci-uclass.c

@@ -301,14 +301,10 @@ int pci_auto_config_devices(struct udevice *bus)
 	for (ret = device_find_first_child(bus, &dev);
 	     !ret && dev;
 	     ret = device_find_next_child(&dev)) {
-		struct pci_controller *ctlr_hose;
 		unsigned int max_bus;
 
 		debug("%s: device %s\n", __func__, dev->name);
-
+		max_bus = pciauto_config_device(hose, pci_get_bdf(dev));
-		/* The root controller has the region information */
-		ctlr_hose = hose->ctlr->uclass_priv;
-		max_bus = pciauto_config_device(ctlr_hose, pci_get_bdf(dev));
 		sub_bus = max(sub_bus, max_bus);
 	}
 	debug("%s: done\n", __func__);

drivers/pci/pci_auto.c

@@ -213,11 +213,24 @@ void pciauto_setup_device(struct pci_controller *hose,
 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 					 pci_dev_t dev, int sub_bus)
 {
-	struct pci_region *pci_mem = hose->pci_mem;
+	struct pci_region *pci_mem;
-	struct pci_region *pci_prefetch = hose->pci_prefetch;
+	struct pci_region *pci_prefetch;
-	struct pci_region *pci_io = hose->pci_io;
+	struct pci_region *pci_io;
 	u16 cmdstat, prefechable_64;
 
+#ifdef CONFIG_DM_PCI
+	/* The root controller has the region information */
+	struct pci_controller *ctlr_hose = pci_bus_to_hose(0);
+
+	pci_mem = ctlr_hose->pci_mem;
+	pci_prefetch = ctlr_hose->pci_prefetch;
+	pci_io = ctlr_hose->pci_io;
+#else
+	pci_mem = hose->pci_mem;
+	pci_prefetch = hose->pci_prefetch;
+	pci_io = hose->pci_io;
+#endif
+
 	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
 	pci_hose_read_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
 				&prefechable_64);
@@ -295,9 +308,22 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 void pciauto_postscan_setup_bridge(struct pci_controller *hose,
 					  pci_dev_t dev, int sub_bus)
 {
-	struct pci_region *pci_mem = hose->pci_mem;
+	struct pci_region *pci_mem;
-	struct pci_region *pci_prefetch = hose->pci_prefetch;
+	struct pci_region *pci_prefetch;
-	struct pci_region *pci_io = hose->pci_io;
+	struct pci_region *pci_io;
+
+#ifdef CONFIG_DM_PCI
+	/* The root controller has the region information */
+	struct pci_controller *ctlr_hose = pci_bus_to_hose(0);
+
+	pci_mem = ctlr_hose->pci_mem;
+	pci_prefetch = ctlr_hose->pci_prefetch;
+	pci_io = ctlr_hose->pci_io;
+#else
+	pci_mem = hose->pci_mem;
+	pci_prefetch = hose->pci_prefetch;
+	pci_io = hose->pci_io;
+#endif
 
 	/* Configure bus number registers */
 #ifdef CONFIG_DM_PCI
@@ -425,10 +451,26 @@ void pciauto_config_init(struct pci_controller *hose)
  */
 int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 {
+	struct pci_region *pci_mem;
+	struct pci_region *pci_prefetch;
+	struct pci_region *pci_io;
 	unsigned int sub_bus = PCI_BUS(dev);
 	unsigned short class;
 	int n;
 
+#ifdef CONFIG_DM_PCI
+	/* The root controller has the region information */
+	struct pci_controller *ctlr_hose = pci_bus_to_hose(0);
+
+	pci_mem = ctlr_hose->pci_mem;
+	pci_prefetch = ctlr_hose->pci_prefetch;
+	pci_io = ctlr_hose->pci_io;
+#else
+	pci_mem = hose->pci_mem;
+	pci_prefetch = hose->pci_prefetch;
+	pci_io = hose->pci_io;
+#endif
+
 	pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
 
 	switch (class) {
@@ -436,8 +478,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 		DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n",
 		       PCI_DEV(dev));
 
-		pciauto_setup_device(hose, dev, 2, hose->pci_mem,
+		pciauto_setup_device(hose, dev, 2, pci_mem,
-			hose->pci_prefetch, hose->pci_io);
+				     pci_prefetch, pci_io);
 
 #ifdef CONFIG_DM_PCI
 		n = dm_pci_hose_probe_bus(hose, dev);
@@ -467,8 +509,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 		 * just do a minimal setup of the bridge,
 		 * let the OS take care of the rest
 		 */
-		pciauto_setup_device(hose, dev, 0, hose->pci_mem,
+		pciauto_setup_device(hose, dev, 0, pci_mem,
-			hose->pci_prefetch, hose->pci_io);
+				     pci_prefetch, pci_io);
 
 		DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
 			PCI_DEV(dev));
@@ -502,8 +544,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 		DEBUGF("PCI AutoConfig: Found PowerPC device\n");
 
 	default:
-		pciauto_setup_device(hose, dev, 6, hose->pci_mem,
+		pciauto_setup_device(hose, dev, 6, pci_mem,
-			hose->pci_prefetch, hose->pci_io);
+				     pci_prefetch, pci_io);
 		break;
 	}
 

drivers/pci/pci_common.c

@@ -224,7 +224,7 @@ phys_addr_t pci_hose_bus_to_phys(struct pci_controller *hose,
 
 #ifdef CONFIG_DM_PCI
 	/* The root controller has the region information */
-	hose = hose->ctlr->uclass_priv;
+	hose = pci_bus_to_hose(0);
 #endif
 
 	/*
@@ -289,6 +289,11 @@ pci_addr_t pci_hose_phys_to_bus(struct pci_controller *hose,
 		return bus_addr;
 	}
 
+#ifdef CONFIG_DM_PCI
+	/* The root controller has the region information */
+	hose = pci_bus_to_hose(0);
+#endif
+
 	/*
 	 * if PCI_REGION_MEM is set we do a two pass search with preference
 	 * on matches that don't have PCI_REGION_SYS_MEMORY set