Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

board/freescale/b4860qds/Makefile

@@ -5,11 +5,11 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
 obj-y	+= b4860qds.o
-obj-$(CONFIG_B4860QDS)+= eth_b4860qds.o
-obj-$(CONFIG_PCI)      += pci.o
+obj-$(CONFIG_B4860QDS)	+= eth_b4860qds.o
+obj-$(CONFIG_PCI)	+= pci.o
 endif
 
 obj-y	+= ddr.o

board/freescale/b4860qds/ddr.c

@@ -179,15 +179,13 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
-
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
 	return dram_size;
 }
 

board/freescale/b4860qds/spl.c

@@ -91,6 +91,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();

board/freescale/bsc9131rdb/Makefile

@@ -13,15 +13,11 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
-
-obj-y        += bsc9131rdb.o
-obj-y        += ddr.o
-obj-y        += law.o
-obj-y        += tlb.o
-#obj-y		+= bsc9131rdb_mux.o
-
+obj-y	+= bsc9131rdb.o
+obj-y	+= ddr.o
 endif
+
+obj-y	+= law.o
+obj-y	+= tlb.o

board/freescale/bsc9132qds/Makefile

@@ -13,14 +13,11 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
-
 obj-y	+= bsc9132qds.o
 obj-y	+= ddr.o
+endif
+
 obj-y	+= law.o
 obj-y	+= tlb.o
-
-endif

board/freescale/c29xpcie/Makefile

@@ -11,15 +11,15 @@ endif
 endif
 
 ifdef MINIMAL
-obj-y	+= spl_minimal.o tlb.o law.o
+obj-y	+= spl_minimal.o
 else
 ifdef CONFIG_SPL_BUILD
 obj-y	+= spl.o
 endif
-
 obj-y	+= c29xpcie.o
 obj-y	+= cpld.o
 obj-y	+= ddr.o
+endif
+
 obj-y	+= law.o
 obj-y	+= tlb.o
-endif

board/freescale/c29xpcie/spl.c

@@ -57,6 +57,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 	/* relocate environment function pointers etc. */
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/p1010rdb/Makefile

@@ -13,18 +13,14 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
-
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 endif
-
 obj-y	+= p1010rdb.o
 obj-y	+= ddr.o
+endif
+
 obj-y	+= law.o
 obj-y	+= tlb.o
-
-endif

board/freescale/p1010rdb/spl.c

@@ -72,6 +72,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();

board/freescale/p1022ds/Makefile

@@ -13,17 +13,15 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y        += spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 endif
 obj-y	+= p1022ds.o
 obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
-
 obj-$(CONFIG_FSL_DIU_FB) += diu.o
 endif
+
+obj-y	+= law.o
+obj-y	+= tlb.o

board/freescale/p1022ds/spl.c

@@ -86,6 +86,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();
 #endif

board/freescale/p1_p2_rdb_pc/Makefile

@@ -13,17 +13,14 @@ endif
 endif
 
 ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
+obj-y	+= spl_minimal.o
 else
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
+endif
+obj-y	+= p1_p2_rdb_pc.o
+obj-y	+= ddr.o
 endif
 
-obj-y        += p1_p2_rdb_pc.o
-obj-y        += ddr.o
-obj-y        += law.o
-obj-y        += tlb.o
-
-endif
+obj-y	+= law.o
+obj-y	+= tlb.o

board/freescale/p1_p2_rdb_pc/spl.c

@@ -83,6 +83,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifndef CONFIG_SPL_NAND_BOOT
 	env_init();

board/freescale/p2041rdb/Makefile

@@ -7,6 +7,6 @@
 #
 
 obj-y	+= p2041rdb.o
-obj-y += cpld.o
+obj-y	+= cpld.o
 obj-y	+= ddr.o
 obj-y	+= eth.o

board/freescale/t102xqds/Makefile

@@ -5,7 +5,7 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
 obj-y	+= t102xqds.o
 obj-y	+= eth_t102xqds.o

board/freescale/t102xqds/ddr.c

@@ -172,14 +172,13 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
-
 	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
 	fsl_dp_resume();

board/freescale/t102xqds/spl.c

@@ -120,6 +120,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t102xrdb/Makefile

@@ -5,7 +5,7 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
 obj-y   += t102xrdb.o
 obj-$(CONFIG_T1024RDB)   += cpld.o

board/freescale/t102xrdb/ddr.c

@@ -234,12 +234,12 @@ phys_size_t initdram(int board_type)
 	puts("Initializing....using SPD\n");
 #endif
 	dram_size = fsl_ddr_sdram();
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
 	fsl_dp_resume();

board/freescale/t102xrdb/spl.c

@@ -107,6 +107,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t104xrdb/ddr.c

@@ -124,15 +124,12 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
-
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 #if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
 	fsl_dp_resume();

board/freescale/t104xrdb/spl.c

@@ -98,6 +98,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_MMC_BOOT
 	mmc_initialize(bd);

board/freescale/t208xqds/Makefile

@@ -7,10 +7,8 @@
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 else
-obj-$(CONFIG_T2080QDS) += t208xqds.o
-obj-$(CONFIG_T2080QDS) += eth_t208xqds.o
-obj-$(CONFIG_T2081QDS) += t208xqds.o
-obj-$(CONFIG_T2081QDS) += eth_t208xqds.o
+obj-$(CONFIG_T2080QDS) += t208xqds.o eth_t208xqds.o
+obj-$(CONFIG_T2081QDS) += t208xqds.o eth_t208xqds.o
 obj-$(CONFIG_PCI)      += pci.o
 endif
 

board/freescale/t208xqds/ddr.c

@@ -108,13 +108,12 @@ phys_size_t initdram(int board_type)
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size =  fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 	return dram_size;
 }

board/freescale/t208xqds/spl.c

@@ -106,6 +106,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t208xrdb/Makefile

@@ -5,11 +5,9 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
-obj-$(CONFIG_T2080RDB) += t208xrdb.o
-obj-$(CONFIG_T2080RDB) += eth_t208xrdb.o
-obj-$(CONFIG_T2080RDB) += cpld.o
+obj-$(CONFIG_T2080RDB) += t208xrdb.o eth_t208xrdb.o cpld.o
 obj-$(CONFIG_PCI)      += pci.o
 endif
 

board/freescale/t208xrdb/ddr.c

@@ -101,12 +101,12 @@ phys_size_t initdram(int board_type)
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	puts("Initializing....using SPD\n");
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size = fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
 	return dram_size;
 }

board/freescale/t208xrdb/spl.c

@@ -76,6 +76,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t4qds/Makefile

@@ -5,12 +5,12 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
-obj-$(CONFIG_T4240QDS) += t4240qds.o
-obj-$(CONFIG_T4240QDS)+= eth.o
+obj-$(CONFIG_T4240QDS)	+= t4240qds.o eth.o
 obj-$(CONFIG_PCI)	+= pci.o
 endif
+
 obj-y	+= ddr.o
 obj-y	+= law.o
 obj-y	+= tlb.o

board/freescale/t4qds/ddr.c

@@ -117,13 +117,12 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size = fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
 	return dram_size;
 }

board/freescale/t4qds/spl.c

@@ -116,6 +116,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 #ifdef CONFIG_SPL_NAND_BOOT
 	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,

board/freescale/t4rdb/Makefile

@@ -5,13 +5,14 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
+obj-y	+= spl.o
 else
-obj-$(CONFIG_T4240RDB) += t4240rdb.o
-obj-y	+= cpld.o
-obj-y	+= eth.o
+obj-$(CONFIG_T4240RDB)	+= t4240rdb.o
+obj-y			+= cpld.o
+obj-y			+= eth.o
 obj-$(CONFIG_PCI)	+= pci.o
 endif
+
 obj-y	+= ddr.o
 obj-y	+= law.o
 obj-y	+= tlb.o

board/freescale/t4rdb/ddr.c

@@ -110,13 +110,12 @@ phys_size_t initdram(int board_type)
 
 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
 	dram_size = fsl_ddr_sdram();
-
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
 #else
 	/* DDR has been initialised by first stage boot loader */
 	dram_size = fsl_ddr_sdram_size();
 #endif
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
 
 	return dram_size;
 }

board/freescale/t4rdb/spl.c

@@ -80,6 +80,7 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 
 	mmc_initialize(bd);
 	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,