leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

m68k: remove TASREG board

Browse Source 
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Matthias Fuchs
2015-01-12 22:33:38 +01:00
committed by Tom Rini
parent 92fa7f53f1
commit cbdc662a2c
12 changed files with 1 additions and 11565 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
board/esd/tasreg/Kconfig
View File

@@ -1,15 +0,0 @@
if TARGET_TASREG
config SYS_CPU
default "mcf52x2"
config SYS_BOARD
default "tasreg"
config SYS_VENDOR
default "esd"
config SYS_CONFIG_NAME
default "TASREG"
endif

6
board/esd/tasreg/MAINTAINERS
View File

@@ -1,6 +0,0 @@
TASREG BOARD
M: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
S: Maintained
F: board/esd/tasreg/
F: include/configs/TASREG.h
F: configs/TASREG_defconfig

8
board/esd/tasreg/Makefile
View File

@@ -1,8 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y = tasreg.o flash.o

9
board/esd/tasreg/config.mk
View File

@@ -1,9 +0,0 @@
#
# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
CONFIG_SYS_TEXT_BASE = 0xffc00000

59
board/esd/tasreg/flash.c
View File

@@ -1,59 +0,0 @@
/*
* (C) Copyright 2001
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
/*#include <asm/ppc4xx.h>*/
#include <asm/processor.h>
/*
* include common flash code (for esd boards)
*/
#include "../common/flash.c"
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long * addr, flash_info_t * info);
static void flash_get_offsets (ulong base, flash_info_t * info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
unsigned long size_b0;
int i;
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0<<20);
}
/* Setup offsets */
flash_get_offsets (-size_b0, &flash_info[0]);
/* test-only: todo: Re-do sizing to get full correct info */
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE,
CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-1,
&flash_info[0]);
flash_info[0].size = size_b0;
return (size_b0);
}

10661
board/esd/tasreg/fpgadata.c
View File

File diff suppressed because it is too large Load Diff

432
board/esd/tasreg/tasreg.c
View File

@@ -1,432 +0,0 @@
/*
* (C) Copyright 2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <malloc.h>
#include <asm/m5249.h>
#include <asm/io.h>
/* Prototypes */
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
#if 0
#define FPGA_DEBUG
#endif
/* predefine these here for FPGA programming (before including fpga.c) */
#define SET_FPGA(data) mbar2_writeLong(MCFSIM_GPIO1_OUT, data)
#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_DONE)
#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_INIT)
#define FPGA_PROG_ACTIVE_HIGH /* on this platform is PROG active high! */
#define out32(a,b) /* nothing to do (gpio already configured) */
/* fpga configuration data - generated by bin2cc */
const unsigned char fpgadata[] =
{
#include "fpgadata.c"
};
/*
* include common fpga code (for esd boards)
*/
#include "../common/fpga.c"
int checkboard (void) {
ulong val;
uchar val8;
puts ("Board: ");
puts("esd TASREG");
val8 = ((uchar)~((uchar)mbar2_readLong(MCFSIM_GPIO1_READ) >> 4)) & 0xf;
printf(" (Switch=%1X)\n", val8);
/*
* Set LED on
*/
val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED;
mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */
return 0;
};
phys_size_t initdram (int board_type) {
unsigned long junk = 0xa5a59696;
/*
* Note:
* RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1
*/
#ifdef CONFIG_SYS_FAST_CLK
/*
* Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K)
* SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39
*/
mbar_writeShort(MCFSIM_DCR, 0x8239);
#elif CONFIG_SYS_PLL_BYPASS
/*
* Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K)
* SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02
*/
mbar_writeShort(MCFSIM_DCR, 0x8202);
#else
/*
* Busclk=36MHz, RefreshTime=64ms, #rows=4096 (4K)
* SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=22 (562 bus clock cycles)
*/
mbar_writeShort(MCFSIM_DCR, 0x8222);
#endif
/*
* SDRAM starts at 0x0000_0000, CASL=10, CBM=010, PS=10 (16bit port),
* PM=1 (continuous page mode)
*/
/* RE=0 (keep auto-refresh disabled while setting up registers) */
mbar_writeLong(MCFSIM_DACR0, 0x00003324);
/* BAM=007c (bits 22,21 are bank selects; 256kB blocks) */
mbar_writeLong(MCFSIM_DMR0, 0x01fc0001);
/** Precharge sequence **/
mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */
out_be32((void *)0, junk); /* write to a memory location to init. precharge */
udelay(0x10); /* Allow several Precharge cycles */
/** Refresh Sequence **/
mbar_writeLong(MCFSIM_DACR0, 0x0000b324); /* Enable the refresh bit, DACR0[RE] (bit 15) */
udelay(0x7d0); /* Allow gobs of refresh cycles */
/** Mode Register initialization **/
mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
out_be32((void *)0x800, junk); /* Access RAM to initialize the mode register */
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
};
int testdram (void) {
/* TODO: XXX XXX XXX */
printf ("DRAM test not implemented!\n");
return (0);
}
int misc_init_r (void)
{
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
int index;
int i;
uchar buf[8];
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
status = fpga_boot(dst, len);
if (status != 0) {
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("FPGA: %s\n", &(dst[index+1]));
index += len+3;
}
putc ('\n');
/* delayed reboot */
for (i=20; i>0; i--) {
printf("Rebooting in %2d seconds \r",i);
for (index=0;index<1000;index++)
udelay(1000);
}
putc ('\n');
do_reset(NULL, 0, 0, NULL);
}
puts("FPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("%s ", &(dst[index+1]));
index += len+3;
}
putc ('\n');
free(dst);
/*
*
*/
buf[0] = 0x00;
buf[1] = 0x32;
buf[2] = 0x3f;
i2c_write(0x38, 0, 0, buf, 3);
return (0);
}
#if 1 /* test-only: board specific test commands */
int i2c_probe(uchar addr);
/*
*/
int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr;
if (argc < 2) {
puts("ERROR!\n");
return -1;
}
addr = simple_strtol (argv[1], NULL, 16);
printf("i2c probe looping on addr 0x%lx (cntrl-c aborts)...\n", addr);
for (;;) {
i2c_probe(addr);
/* Abort if ctrl-c was pressed */
if (ctrlc()) {
puts("\nAbort\n");
return 0;
}
udelay(1000);
}
return 0;
}
U_BOOT_CMD(
iploop, 2, 1, do_iploop,
"i2c probe loop <addr>",
""
);
/*
*/
int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
uchar buf[8];
out_be16((void *)0xe0000000, 0x4000);
udelay(5000); /* wait for 5ms */
buf[0] = 0x10;
buf[1] = 0x07;
buf[2] = 0x03;
i2c_write(0x10, 0, 0, buf, 3);
buf[0] = 0x10;
buf[1] = 0x01;
buf[2] = 0x80;
i2c_write(0x10, 0, 0, buf, 3);
buf[0] = 0x10;
buf[1] = 0x02;
buf[2] = 0x03;
i2c_write(0x10, 0, 0, buf, 3);
buf[0] = 0x10;
buf[1] = 0x03;
buf[2] = 0x29;
i2c_write(0x10, 0, 0, buf, 3);
buf[0] = 0x10;
buf[1] = 0x04;
buf[2] = 0x00;
i2c_write(0x10, 0, 0, buf, 3);
buf[0] = 0x10;
buf[1] = 0x05;
buf[2] = 0x00;
i2c_write(0x10, 0, 0, buf, 3);
buf[0] = 0x10;
buf[1] = 0x07;
buf[2] = 0x02;
i2c_write(0x10, 0, 0, buf, 3);
return 0;
}
U_BOOT_CMD(
codec, 1, 1, do_codec,
"Enable codec",
""
);
/*
*/
int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr;
ulong instr;
ulong cntrl;
ulong data;
uchar buf[8];
if (argc < 5) {
puts("ERROR!\n");
return -1;
}
addr = simple_strtol (argv[1], NULL, 16);
instr = simple_strtol (argv[2], NULL, 16);
cntrl = simple_strtol (argv[3], NULL, 16);
data = simple_strtol (argv[4], NULL, 16);
buf[0] = (uchar)instr;
buf[1] = (uchar)cntrl;
buf[2] = (uchar)data;
i2c_write(addr, 0, 0, buf, 3);
return 0;
}
U_BOOT_CMD(
saa, 5, 1, do_saa,
"Write to SAA1064 <addr> <instr> <cntrl> <data>",
""
);
/*
*/
int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr;
ulong data0;
ulong data1;
ulong data2;
ulong data3;
uchar buf[8];
int cnt;
if (argc < 3) {
puts("ERROR!\n");
return -1;
}
addr = simple_strtol (argv[1], NULL, 16);
cnt = simple_strtol (argv[2], NULL, 16);
data0 = simple_strtol (argv[3], NULL, 16);
data1 = simple_strtol (argv[4], NULL, 16);
data2 = simple_strtol (argv[5], NULL, 16);
data3 = simple_strtol (argv[6], NULL, 16);
printf("Writing %d bytes to device %lx!\n", cnt, addr);
buf[0] = (uchar)data0;
buf[1] = (uchar)data1;
buf[2] = (uchar)data2;
buf[3] = (uchar)data3;
i2c_write(addr, 0, 0, buf, cnt);
return 0;
}
U_BOOT_CMD(
iwrite, 6, 1, do_iwrite,
"Write n bytes to I2C-device",
"addr cnt data0 ... datan"
);
/*
*/
int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr;
ulong cnt;
uchar buf[32];
int i;
if (argc < 3) {
puts("ERROR!\n");
return -1;
}
addr = simple_strtol (argv[1], NULL, 16);
cnt = simple_strtol (argv[2], NULL, 16);
i2c_read(addr, 0, 0, buf, cnt);
printf("I2C Data:");
for (i=0; i<cnt; i++) {
printf(" %02X", buf[i]);
}
printf("\n");
return 0;
}
U_BOOT_CMD(
iread, 3, 1, do_iread,
"Read from I2C <addr> <cnt>",
""
);
/*
*/
int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong addr;
uchar buf[32];
int cnt;
if (argc < 2) {
puts("ERROR!\n");
return -1;
}
addr = simple_strtol (argv[1], NULL, 16);
cnt = 1;
printf("iread looping on addr 0x%lx (cntrl-c aborts)...\n", addr);
for (;;) {
i2c_read(addr, 0, 0, buf, cnt);
/* Abort if ctrl-c was pressed */
if (ctrlc()) {
puts("\nAbort\n");
return 0;
}
udelay(3000);
}
return 0;
}
U_BOOT_CMD(
ireadl, 2, 1, do_ireadl,
"Read-loop from I2C <addr>",
""
);
#endif

82
board/esd/tasreg/u-boot.lds
View File

@@ -1,82 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
OUTPUT_ARCH(m68k)
SECTIONS
{
.text :
{
arch/m68k/cpu/mcf52x2/start.o (.text*)
*(.text*)
}
_etext = .;
PROVIDE (etext = .);
.rodata :
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
__got_start = .;
KEEP(*(.got))
__got_end = .;
_GOT2_TABLE_ = .;
KEEP(*(.got2))
_FIXUP_TABLE_ = .;
KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
*(.data*)
*(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
. = .;
. = ALIGN(4);
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*)));
}
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(256);
__init_end = .;
__bss_start = .;
.bss (NOLOAD) :
{
_sbss = .;
*(.bss*)
*(.sbss*)
*(COMMON)
. = ALIGN(4);
_ebss = .;
}
__bss_end = . ;
PROVIDE (end = .);
}