leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mtd: rawnand: fsl_elbc: Use ECC configuration from device tree

Browse Source 
Initialize ECC configuration after nand_scan_ident() call and only in case
nand_scan_ident() have not done it. nand_scan_ident() fills ECC
configuration from device tree.

Fixes usage of NAND_ECC_SOFT_BCH when it is specified in device tree.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
This commit is contained in:
Pali Rohár 2022-04-04 18:17:20 +02:00 committed by Priyanka Jain
parent da98ddaf73
commit c9ea9019c5
1 changed files with 29 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
drivers/mtd/nand/raw/fsl_elbc_nand.c
View File

@ -737,20 +737,20 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr, ofnode flash_node)
nand->controller = &elbc_ctrl->controller;
nand_set_controller_data(nand, priv);
nand->ecc.read_page = fsl_elbc_read_page;
nand->ecc.write_page = fsl_elbc_write_page;
nand->ecc.write_subpage = fsl_elbc_write_subpage;
priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT);
ret = nand_scan_ident(mtd, 1, NULL);
if (ret)
return ret;
/* If nand_scan_ident() has not selected ecc.mode, do it now */
if (nand->ecc.mode == NAND_ECC_NONE) {
/* If CS Base Register selects full hardware ECC then use it */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.layout = (priv->fmr & FMR_ECCM) ?
&fsl_elbc_oob_sp_eccm1 :
&fsl_elbc_oob_sp_eccm0;
nand->ecc.size = 512;
nand->ecc.bytes = 3;
nand->ecc.steps = 1;
@ -763,10 +763,13 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr, ofnode flash_node)
nand->ecc.mode = NAND_ECC_SOFT;
#endif
}
}
ret = nand_scan_ident(mtd, 1, NULL);
if (ret)
return ret;
if (nand->ecc.mode == NAND_ECC_HW) {
nand->ecc.read_page = fsl_elbc_read_page;
nand->ecc.write_page = fsl_elbc_write_page;
nand->ecc.write_subpage = fsl_elbc_write_subpage;
}
/* Large-page-specific setup */
if (mtd->writesize == 2048) {
@ -785,7 +788,7 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr, ofnode flash_node)
priv->fmr |= FMR_ECCM;
/* adjust ecc setup if needed */
if ((br & BR_DECC) == BR_DECC_CHK_GEN) {
if (nand->ecc.mode == NAND_ECC_HW) {
nand->ecc.steps = 4;
nand->ecc.layout = (priv->fmr & FMR_ECCM) ?
&fsl_elbc_oob_lp_eccm1 :